1.1 This specification contains various requirements that, with the exception of Sections 5 and 10, are mandatory requirements to the following ASTM nickel and nickel alloy, seamless pipe and tube specifications: Title of Specification ASTM Designation 2 Nickel Seamless Pipe and Tube B 161 Seamless Nickel and Nickel Alloy, Condenser and B 163 Heat Exchanger Tubes Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube B 165 Nickel-Chromium-Iron Alloys (UNS N06600, N06601, and B 167 N06690) Seamless Pipe and Tube Nickel-Iron-Chromium Alloy Seamless Pipe and Tube B 407 Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS B 423 N08825 and N08221) Seamless Pipe and Tube Nickel-Chromium-Molybdenum-Columbium Alloys (UNS B 444 N06625) Pipe and Tube Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten B 445 Alloy (UNS N06102) Seamless Pipe and Tube Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and B 535 UNS N08332) Seamless Pipe Copper-Beryllium Alloy Forgings and Extrusion B 570 3 Seamless Nickel and Nickel-Cobalt Alloy Pipe and B 622 Tube UNS N08028 Seamless Tubes B 668 UNS N08904, UNS N08925 and UNS N08926 Seamless Pipe B 677 and Tube Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 B 690 and UNS N08367) Seamless Pipe and Tube Ni-Cr-Mo-Co-W-Fe-Si Alloy (UNS N06333) Seamless Pipe B 722 and Tube Seamless UNS N08020, UNS N08026, and UNS N08024 B 729 Nickel-Alloy Pipe and Tube
1.2 One or more of the test requirements of Section 5 apply only if specifically stated in the product specification or in the purchase order.
1.3 In case of conflict between a requirement of the product specification and a requirement of this general specification, only the requirement of the product specification needs to be satisfied.
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 The following safety hazards caveat pertains only to the test requirements portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
B880 Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
E8/E8M Test Methods for Tension Testing of Metallic Materials
E18 Test Methods for Rockwell Hardness of Metallic Materials
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E39 Methods for Chemical Analysis of Nickel
E76 Test Methods for Chemical Analysis of Nickel-Copper Alloys
E112 Test Methods for Determining Average Grain Size
E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing
E426 Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
E571 Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
E1473 Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
B36.19 Stainless Steel Pipe
cold worked; hot finished; nickel; nickel alloys; seamless pipe; seamless tube;
ICS Number Code 23.040.15 (Non-ferrous metal pipes)
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]