ASTM B824-04

1. Scope

1.1 本规范规定了与 ASTM 铜合金铸件规范共同的一般要求：B 22、B 61、B 62、B 66、B 67、B 148、B 176、B 271、B 369、B 427、B 505、B 584、B 763、B 770 和 B 806。这些要求适用于铸件规范，具体参考范围如下。

1.1.1 本规范与任何铸件规范有冲突时，应以铸件规范要求为准。

1.2 本规范中未包含的化学成份以及其他要求应在铸件产品规范中规定。

1.3单位－以英寸-磅为单位的值被视为标准值。括号中给出的值是通过数学换算成 SI 单位，其仅为参考信息，不应视为标准值。

1.4 对于同一铸件在不同地点的金属特性之间，以及铸件与其独立铸造的测试棒的特性之间，无法做出精确的量化关系说明。（ 参见附录 X1）

2. Referenced Documents

B148 Specification for Aluminum-Bronze Sand Castings
B176 Specification for Copper-Alloy Die Castings
B194 Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B208 Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
B22 Specification for Bronze Castings for Bridges and Turntables
B271 Specification for Copper-Base Alloy Centrifugal Castings
B369 Specification for Copper-Nickel Alloy Castings
B427 Specification for Gear Bronze Alloy Castings
B505/B505M Specification for Copper Alloy Continuous Castings
B584 Specification for Copper Alloy Sand Castings for General Applications
B61 Specification for Steam or Valve Bronze Castings
B62 Specification for Composition Bronze or Ounce Metal Castings
B66 Specification for Bronze Castings for Steam Locomotive Wearing Parts
B67 Specification for Car and Tender Journal Bearings, Lined
B763 Specification for Copper Alloy Sand Castings for Valve Applications
B770 Specification for Copper-Beryllium Alloy Sand Castings for General Applications
B806 Specification for Copper Alloy Permanent Mold Castings for General Applications
B846 Terminology for Copper and Copper Alloys
E255 Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E478 Test Methods for Chemical Analysis of Copper Alloys
E54 Test Methods for Chemical Analysis of Special Brasses and Bronzes
E581 Test Methods for Chemical Analysis of Manganese-Copper Alloys
E62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E76 Test Methods for Chemical Analysis of Nickel-Copper Alloys
E8/E8M Test Methods for Tension Testing of Metallic Materials

---

Index Terms

铜合金铸件；铜基合金铸件；UNS 编号C94700；UNS 编号C95300；UNS 编号C95400；UNS编号C95410；UNS 编号C95500；UNS 编号C95520；UNS 编号C96800

---

Citing ASTM Standards

[Back to Top]