1. Scope
1.1 This specification covers UNS N08120, UNS N08890, UNS N08800, UNS N08810, and UNS N08811* in the form of rolled plate, sheet, and strip. Alloy UNS N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08120, UNS N08810, UNS N08811, and UNS N08890 are normally employed in service temperatures above 1100°F (593°C) where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in this temperature range.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
2. Referenced Documents (purchase separately) 
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
B408 Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B906 Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
E140 Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
F155 Method of Test for Temper of Strip and Sheet Metals for Electronic Devices (Spring-Back Method)
Keywords
plate; sheet; strip; UNS N08120; UNS N08800; UNS N08801; UNS N08810; UNS N08811; UNS N08890; Nickel-iron alloy--specifications; Nickel-iron-chromium alloys--specifications; Rolled plate/sheet/strip; UNS N08120 (Ni-Fe-Cr alloy, HR-120); UNS N08800 (Fe-Ni-Cr alloy, Incoloy 800); UNS N08810 (Fe-Ni-Cr alloy, Incoloy 800H); UNS N08811 (wrought Ni-Fe-Cr alloy, Incoloy 800HT); ICS Number Code 8890; 77.150.40 (Nickel and chromium products)
ICS Code
ICS Number Code 77.150.40 (Nickel and chromium products)
DOI: 10.1520/B0409-01
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]
