1. Scope
1.1 This specification covers UNS N08120, UNS N08800, UNS N08810, UNS N08811*, and UNS N08890 in the form of hot-worked and cold-worked rod and bar. Alloy UNS N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08120, UNS N08810, UNS N08811, and UNS N08890 are normally employed in service temperatures above 1100°F (593°C) where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in this temperature range.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
2. Referenced Documents (purchase separately) 
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
B880 Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
E8 Test Methods for Tension Testing of Metallic Materials
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E112 Test Methods for Determining Average Grain Size
E1473 Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
Keywords
bar; rod; UNS N08120; UNS N08800; UNS N08801; UNS N08810; UNS N08811 ; UNS N08890; Nickel alloy rod/bar/wire--specifications; Nickel-iron alloy--specifications; Nickel-iron-chromium alloys--specifications; UNS N08120 (Ni-Fe-Cr alloy, HR-120); UNS N08800 (Fe-Ni-Cr alloy, Incoloy 800); UNS N08810 (Fe-Ni-Cr alloy, Incoloy 800H); UNS N08811 (wrought Ni-Fe-Cr alloy, Incoloy 800HT); ICS Number Code 8890; 77.150.40 (Nickel and chromium products)
ICS Code
ICS Number Code 77.150.40 (Nickel and chromium products)
DOI: 10.1520/B0408-96
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]
