1.1 This specification establishes the requirements for brass plate, sheet, strip, and rolled bar of the following alloys:
|Copper, %||Zinc, %|
|C21000||Gilding, 95 %||95||5|
|C22000||Commerical Bronze, 90 %||90||10|
|C22600||Jewerly Bronze, 871/2 %||87.5||12.5|
|C23000||Red Brass, 85 %||85||15|
|C24000||Low Brass, 80 %||80||20|
|C26000||Cartridge Brass, 70 %||70||30|
|C26800||Yellow Brass, 66 %||66||34|
|C28000||Muntz Metal, 60 %||60||40|
1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from two systems may results in nonconformance with the standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
B248 Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B248M Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
B601 Classification for Temper Designations for Copper and Copper Alloys--Wrought and Cast
B846 Terminology for Copper and Copper Alloys
E8 Test Methods for Tension Testing of Metallic Materials
E8M Test Methods for Tension Testing of Metallic Materials [Metric]
E112 Test Methods for Determining Average Grain Size
E478 Test Methods for Chemical Analysis of Copper Alloys
brass plate; brass rolled bar; brass sheet; brass strip; UNS No. C21000; UNS No. C22000; UNS No. C22600; UNS No. C23000; UNS No. C24000; UNS No. C26000; UNS No. C26800; UNS No. C27200; UNS No. C28000; Brass plate/sheet/strip/rolled bar; Cartridge brass; Commercial bronze; Copper alloy plate/sheet/strip/rolled bar--specifications; Jewelry bronze; UNS C21000 (brass, gilding 95%); UNS C22000 (commercial bronze, 80%); UNS C22600 (jewelry bronze); UNS C23000 (red brass, 85%); UNS C24000 (low brass, 80 %); UNS C26000 (cartridge brass, 70%); UNS C26800 (yellow brass, 66 %); UNS C27200 (brass); UNS C28000 (Muntz metal, 60 %); Yellow brass; ICS Number Code 8000; 77.150.30 (Copper products)
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]