SUPERSEDED (click for Active standard)
| ||Format||Pages||Price|| |
|8||$52.80||  ADD TO CART|
1.1 This specification covers the requirements for 20 grades of titanium and titanium alloy tubing intended for surface condensers, evaporators, and heat exchangers, as follows:
1.1.1 Grade 1—Unalloyed titanium,
1.1.2 Grade 2—Unalloyed titanium,
1.1.3 Grade 3—Unalloyed titanium,
1.1.4 Grade 7—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.5 Grade 9—Titanium alloy (3 % aluminum, 2.5 % vanadium),
1.1.6 Grade 11—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.7 Grade 12—Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.8 Grade 13—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.9 Grade 14—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.10 Grade 15—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.11 Grade 16—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.12 Grade 17—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.13 Grade 18—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,
1.1.14 Grade 26—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.15 Grade 27—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.16 Grade 28—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,
1.1.17 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.18 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.19 Grade 33—Titanium alloy (0.4% nickel, 0.015% palladium, 0.025% ruthenium, 0.15% chromium), and
1.1.20 Grade 34—Titanium alloy (0.4% nickel, 0.015% palladium, 0.025% ruthenium, 0.15% chromium).
1.1.21 Grade 35—Titanium alloy (4.5 % aluminum, 2 % molybedenum, 1.6% vanadium, 0.5% iron, 0.3 % silicon).
1.2 Tubing covered by this specification shall be heat treated by at least a stress relief as defined in 5.3.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
E8 Test Methods for Tension Testing of Metallic Materials
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E1409 Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
E1941 Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
E2371 Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
E2626 Guide for Spectrometric Analysis of Reactive and Refractory Metals
ICS Number Code 23.040.15 (Non-ferrous metal pipes)
UNSPSC Code 40180000(Tubes tubing and tube fittings); 40101802(Heat exchangers)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM B338-03, Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers, ASTM International, West Conshohocken, PA, 2003, www.astm.orgBack to Top