ASTM B249/B249M-02

1. Scope

1.1 This specification establishes the general requirements common to wrought copper and copper alloy rod, bar, shapes, and forgings which shall apply to Specifications B 16/B 16M, B 21/B 21M, B 98/B 98M, B 124/B 124M, B 138/B 138M, B 139/B 139M, B 140/B 140M, B 150, B 151/B 151M, B 196/B 196M, B 283, B 301/B 301M, B 371, B 411/B 411M, B 441, B 453/B 453M, B 455, and B 570 to the extent referenced therein.

1.2 The chemical composition, physical and mechanical properties, and all other requirements not included in this specification are prescribed in the product specification.

1.3 The values stated in inch-pounds units or SI units are to be regarded separately in the standard. Within the text the SI values are given in brackets. The values stated in each system of units are not exact equivalents; each system is independent of the other. Combining values from the two systems may result in nonconformance with the specification.

Note 1—Requirements for flat wire (defined as flat products up to and including 0.188 in. thick and up to 1 1/4 in. in width, with all surfaces rolled or drawn, without having been slit, sheared or sawed) including square, furnished in coils or straight lengths, or on spools, reels, or bucks are described by the wire Specifications B 206/B 206M and B 272.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

B16/B16M Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines

B21/B21M Specification for Naval Brass Rod, Bar, and Shapes

B98/B98M Specification for Copper-Silicon Alloy Rod, Bar and Shapes

B124/B124M Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

B138/B138M Specification for Manganese Bronze Rod, Bar, and Shapes

B139/B139M Specification for Phosphor Bronze Rod, Bar, and Shapes

B140/B140M Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

B150/B150M Specification for Aluminum Bronze Rod, Bar, and Shapes

B151/B151M Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar

B154 Test Method for Mercurous Nitrate Test for Copper Alloys

B187/B187M Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

B193 Test Method for Resistivity of Electrical Conductor Materials

B194 Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

B196/B196M Specification for Copper-Beryllium Alloy Rod and Bar

B283/B283M Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

B301/B301M Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes

B371/B371M Specification for Copper-Zinc-Silicon Alloy Rod

B411/B411M Specification for Copper-Nickel-Silicon Alloy Rod and Bar

B441 Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

B453/B453M Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

B455 Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

B570 Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions

B577 Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

B846 Terminology for Copper and Copper Alloys

B858 Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

B870 Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)

B900 Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies

B927/B927M Specification for Brass Rod, Bar, and Shapes

B929 Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

B967/B967M Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

B974/B974M Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire

D4855 Practice for Comparing Test Methods

E3 Guide for Preparation of Metallographic Specimens

E8/E8M Test Methods for Tension Testing of Metallic Materials

E18 Test Methods for Rockwell Hardness of Metallic Materials

E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E53 Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

E54 Test Methods for Chemical Analysis of Special Brasses and Bronzes

E62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)

E75 Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys

E76 Test Methods for Chemical Analysis of Nickel-Copper Alloys

E112 Test Methods for Determining Average Grain Size

E118 Test Methods for Chemical Analysis of Copper-Chromium Alloys

E121 Test Methods for Chemical Analysis of Copper-Tellurium Alloys

E255 Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

E290 Test Methods for Bend Testing of Material for Ductility

E478 Test Methods for Chemical Analysis of Copper Alloys

E581 Test Methods for Chemical Analysis of Manganese-Copper Alloys

ICS Code

ICS Number Code 77.150.30 (Copper products)

DOI: 10.1520/B0249_B0249M-02

ASTM International is a member of CrossRef.

Citing ASTM Standards

[Back to Top]