ASTM B241/B241M-02

    Historical Standard: ASTM B241/B241M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

    SUPERSEDED (see Active link, below)


    Buy Standard (PDF)
    16 pages
    $57.60

    Active (view current version of standard)


    ASTM B241 / B241M

    1. Scope

    1.1 This specification covers aluminum and aluminum-alloy seamless pipe in the alloys (Note 1) and tempers shown in Table 1 [Table 2] and extruded round seamless tube in the alloys and tempers shown in Table 3 [Table 4] intended for pressure applications. The standard sizes for seamless pipe are listed in Table 16.7 of ANSI H35.2 and H35.2M. Nonstandard alloys, tempers, and sizes of pipe are produced as seamless extruded tube.

    Note 1—Throughout this specification, use of the term alloy,in the general sense, includes aluminum as well as aluminum alloy.

    Note 2—For other seamless drawn tubes, see Specification B 210 or Specification B 483. For extruded tube see Specification B 221, and for structural pipe and tube see Specification B 429.

    1.2 Alloy and temper designations are in accordance with ANSI H35.1 and H35.1M. The equivalent Unified Numbering System alloy designations are those of Table 5preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E 527.

    1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.

    1.4 The values stated in either inch-pound or SI units are to be regarded separately as standard. The SI units are shown either in brackets or in separate tables. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems will result in nonconformance with this specification.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    B210 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

    B221 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

    B429/B429M Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

    B483/B483M Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications

    B557 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

    B557M Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

    B594 Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products

    B647 Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

    B648 Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

    B660 Practices for Packaging/Packing of Aluminum and Magnesium Products

    B666/B666M Practice for Identification Marking of Aluminum and Magnesium Products

    B807/B807M Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys

    B918 Practice for Heat Treatment of Wrought Aluminum Alloys

    B945 Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers

    E18 Test Methods for Rockwell Hardness of Metallic Materials

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E34 Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

    E227 Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique

    E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

    E607 Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere

    E716 Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis

    E1004 Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method

    E1251 Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

    G47 Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products

    ANSI Standards

    H35.1/H35.1(M) Alloy and Temper Designation Systems for Aluminum Available from Aluminum Association, Inc., 1525 Wilson Blvd., Suite 600, Arlington, VA 22209, http://www.aluminum.org.

    H35.2 Dimensional Tolerances for Aluminum Mill Products

    H35.2(M) Dimensional Tolerances for Aluminum Mill Products [Metric]

    CEN EN Standards

    CENEN14242 Aluminum and Aluminum Alloys. analysis. Inductively coupled plasma optical emission spectral analysis Available from European Committee for Standardization (CEN), 36 rue de Stassart, B-1050, Brussels, Belgium, http://www.cenorm.be.

    Federal Standard

    Fed.Std.No.123 Marking for Shipment (Civil Agencies) Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://dodssp.daps.dla.mil.

    Military Standard

    MIL-STD-129 Marking for Shipment and Storage

    AMS Specification

    AMS2772 Heat Treatment of Aluminum Alloy Raw Materials Available from SAE International (SAE), 400 Commonwealth Dr., Warrendale, PA 15096-0001, http://www.sae.org.


    ICS Code

    ICS Number Code 77.150.10 (Aluminium products)

    UNSPSC Code

    UNSPSC Code 40182200(Seamless aluminum tubes); 40182700(Extruded aluminum tubes)


    DOI: 10.1520/B0241_B0241M-02

    ASTM International is a member of CrossRef.


    Citing ASTM Standards
    Back to Top