SUPERSEDED (see Active link, below)
Active (view current version of standard)
1.1 This specification establishes the requirements for wire in round, hexagonal, octagonal, rectangular, and square form of UNS Alloy Nos. C71000, C74500, C75200, C75700, C76400, C77000, and C79200.
1.2 It is to be understood that this specification is general in that the material is used for many applications where the requirements are too particular to be specified by any of the ordinary tests.
1.2.1 For particular or critical applications it is advisable for the purchaser, or purchaser's agent, to submit samples or drawings to the manufacturer and secure an adjustment of the product material to suit the actual application for which it is intended.
1.3 The ordinary applications for these alloys are as follows:
1.3.1 General Applications -UNS Alloy Nos. C71000, 74500, C75200, and C75700.
1.3.2 Hard or Spring Temper -UNS Alloy Nos. C76400 and C77000.
1.3.3 When ease of machining is important-UNS Alloy No. C79200.Note 1-A complete metric companion (B206M) has been developed; therefore no metric equivalents are presented.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
B250/B250M Specification for General Requirements for Wrought Copper Alloy Wire
B601 Classification for Temper Designations for Copper and Copper Alloys--Wrought and Cast
B846 Terminology for Copper and Copper Alloys
B950 Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
E8/E8M Test Methods for Tension Testing of Metallic Materials
E62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E112 Test Methods for Determining Average Grain Size
E478 Test Methods for Chemical Analysis of Copper Alloys