1.1 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and nickel-chromium-cobalt-molybdenum alloy (UNS N06617) in the form of hot-finished and cold-worked rounds, squares, hexagons, rectangles, and cold-worked wire.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
The following precautionary caveat pertains only to the test methods portion, Section , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
B168 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip
B880 Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
E8 Test Methods for Tension Testing of Metallic Materials
E18 Test Methods for Rockwell Hardness of Metallic Materials
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E38 Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys
E112 Test Methods for Determining Average Grain Size
E140 Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E1473 Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
MIL-STD-129 Marking for Shipment and Storage
Fed.Std.No.182 Continuous Identification Marking of Nickel and Nickel-Base Alloys
bar; rod; wire; UNS N06025; UNS N06045; UNS N06600; UNS N06601; UNS N06603; UNS N06617; UNS N06674; UNS N06690; UNS N06693; UNS N06696: UNS N06693 (Ni-Cr-Fe-Al-CB alloy, Inconel 693); Incoloy/Inconel; Nickel alloy rod/bar/wire--specifications; Nickel-chromium alloys--specifications; Nickel-chromium-cobalt-molybdenum alloy--specifications; Nickel-chromium-iron alloys--specifications; UNS N06025 (Ni-Cr-Fe-Al alloy, Nicofer 6025 HT); UNS N06045 (Ni-Cr-Fe-Si alloy, Nicrofer 45); UNS N06600 (Ni-Cr alloy, Inconel 600); UNS N06601 (Ni-Cr alloy, Inconel 601); UNS N06603 (Ni-Cr-Fe-Al-C alloy, 603GT); UNS N06617 (Ni-Cr alloy, Inconel 617); UNS N06690 (Ni-Cr alloy, Inconel 690); ICS Number Code 6617; 77.150.40 (Nickel and chromium products)
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]