1. Scope
1.1 This specification covers a group of general requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.
1.2 In the case of conflict between a requirement of a product specification and a requirement of this specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this specification and a more stringent requirement of the purchase order, the purchase order shall prevail.
2. Referenced Documents (purchase separately) 
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A312/A312M Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A333/A333M Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
A335/A335M Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A358/A358M Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A369/A369M Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A376/A376M Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A409/A409M Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A778 Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A790/A790M Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A813/A813M Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A814/A814M Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A928/A928M Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A943/A943M Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A949/A949M Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A954 Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe
A994 Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
D3951 Practice for Commercial Packaging
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing
E273 Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing
E309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
E426 Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys
E570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
ANSI Standards
B36.19 Stainless Steel Pipe
Military Standards
MIL-STD-792 Identification Marking Requirements for Special Purpose Equipment
Federal Standard
Fed.Std.No.183 Continuous Identification Marking of Iron and Steel Products
Steel Structures Painting Council
SSPC-SP6 Surface Preparation Specification No. 6 Commercial Blast Cleaning
Keywords
alloy steel pipe; austenitic stainless steel; duplex stainless steel; ferritic/austenitic stainless steel; seamless steel pipe; stainless steel pipe; steel pipe; welded steel pipe;
ICS Code
ICS Number Code 23.040.10 (Iron and steel pipes)
DOI: 10.1520/A0999_A0999M-11
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]
