SUPERSEDED (click for Active standard)
| ||Format||Pages||Price|| |
|11||$60.00||  ADD TO CART|
1.1 This specification covers a group of general requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.
1.2 In the case of conflict between a requirement of a product specification and a requirement of this specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this specification and a more stringent requirement of the purchase order, the purchase order shall prevail.
|Title of Specification||ASTM Desig-nation|
|Seamless and Welded Austenitic Stainless Steel Pipes||A 312/A 312M|
|Seamless and Welded Steel Pipe for Low-Temperature Service||A 333/A 333M|
|Seamless Ferritic Alloy-Steel Pipe for High Temperature Service||A 335/A 335M|
|Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service||A 358/A 358M|
|Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service||A 369/A 369M|
|Seamless Austenitic Steel Pipe for Use With High Temperature Central-Station Service||A 376/A 376M|
|Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service||A 409/A 409M|
|Welded, Unannealed Austenitic Stainless Steel Tubular Products||A 778|
|Seamless and Welded Ferritic/AusteniticStainless Steel Pipe||A 790/A 790M|
|Single- or Double-Welded Austenitic Stainless Steel Pipe||A 813/A 813M|
|Cold-Worked Welded Austenitic Stainless Steel Pipe||A 814/A 814M|
|Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal||A 928/A 928M|
|Spray-Formed Seamless Austenitic Stainless Steel Pipe||A 943/A 943M|
|Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe||A 949/A 949M|
|Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe||A 954|
1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore each system is to be used independently of the other without combining values in any way. The inch-pound units apply unless the "M" designation (SI) of the product specification is specified in the order.
Note 1—The dimensionless designator NPS (nominal pipe size) is used in this standard for such traditional terms as "nominal diameter," "size," " nominal bore," and "nominal size."
1.4 The following precautionary statement pertains only to the test method portion, Section 21, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A312/A312M Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A333/A333M Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
A335/A335M Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A358/A358M Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A369/A369M Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A376/A376M Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
A409/A409M Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A426/A426M Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A451/A451M Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A608/A608M Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A778 Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A790/A790M Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A813/A813M Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A814/A814M Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A872/A872M Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A928/A928M Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
ICS Number Code 23.040.10 (Iron and steel pipes)
UNSPSC Code 40171606(Industrial ferrous alloy pipe)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM A999 / A999M-04, Standard Specification for General Requirements for Alloy and Stainless Steel Pipe, ASTM International, West Conshohocken, PA, 2004, www.astm.orgBack to Top