ASTM A960/A960M-10

    Standard Specification for Common Requirements for Wrought Steel Piping Fittings

    SUPERSEDED (see Active link, below)


      Format Pages Price  
    PDF 9 $50.40   ADD TO CART


    1. Scope

    1.1 This specification covers a group of common requirements that shall apply to wrought steel piping fittings covered in any of the following individual product specifications or any other ASTM specification that invokes this specification or portions thereof:

    Title of SpecificationASTM
    Designation
    Specification for Piping Fittings of Wrought
    Carbon Steel and Alloy Steel for Moderate and
    Elevated Temperatures
    A234/A234M
    Specification for Wrought Austenitic Stainless
    Steel Piping Fittings
    A403/A403M
    Specification for Piping Fittings of Wrought Carbon
    Steel and Alloy Steel for Low-Temperature Service
    A420/A420M
    Specification for Butt-Welding, Wrought-Carbon
    Steel, Piping Fittings with Improved Notch Toughness
    A758/A758M
    Specification for As-Welded Wrought Austenitic
    Stainless Steel Fittings for General Corrosive
    Service at Low and Moderate Temperatures
    A774/A774M
    Specification for Wrought Ferritic, Ferritic/Austenitic,
    and Martensitic Stainless Steel Piping Fittings
    A815/A815M
    Specification for Heat-Treated Carbon Steel
    Fittings for Low-Temperature and Corrosive Service
    A858/A858M
    Specification for Wrought High-Strength
    Low-Alloy Steel Butt-Welded Fittings
    A860/A860M

    1.2 In case of conflict between a requirement of the individual product specification and a requirement of this general requirement specification, the requirements of the individual product specification shall prevail over those of this specification.

    1.3 By mutual agreement between the purchaser and the supplier, additional requirements may be specified (See 4.1.8). The acceptance of any such additional requirements shall be dependent on negotiations with the supplier and must be included in the order as agreed upon by the purchaser and supplier.

    1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text and the tables, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the specification. The inch-pound units shall apply unless the M designation [SI] of the product specification is specified in the order.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    Manufacturers Standardization Society Standards

    MSS-SP-25 The Standard Marking System of Valves, Fittings, Flanges and Unions

    MSS-SP-43 Standard Practice for Light Weight Stainless Steel Butt-Welding Fittings

    MSS-SP-75 Specification for High Test Wrought Butt-Welding Fittings

    MSS-SP-79 Socket Welding Reducer Inserts

    MSS-SP-83 Class 3000 Steel Pipe Unions, Socket Welding and Threaded

    MSS-SP-95 Swage(d) Nipples and Bull Plugs

    MSS-SP-97 Integrally Reinforced Forged Branch Outlet Fittings--Socket Welding, Threaded and Buttwelding Ends

    ASME Standards

    Boiler and Pressure Section IX

    B16.11 Forged Steel Fittings, Socket Welding and Threaded

    B16.9 Steel Butt-Welding Fittings

    ASTM Standards

    A29/A29M Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A234/A234M Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A370 Test Methods and Definitions for Mechanical Testing of Steel Products

    A388/A388M Practice for Ultrasonic Examination of Steel Forgings

    A403/A403M Specification for Wrought Austenitic Stainless Steel Piping Fittings

    A420/A420M Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

    A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment

    A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A758/A758M Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

    A763 Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

    A774/A774M Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

    A815/A815M Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

    A858/A858M Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

    A860/A860M Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings

    A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

    A967 Specification for Chemical Passivation Treatments for Stainless Steel Parts

    A1058 Test Methods for Mechanical Testing of Steel Products--Metric

    E165 Practice for Liquid Penetrant Examination for General Industry

    E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing

    E709 Guide for Magnetic Particle Testing

    E1916 Guide for Identification of Mixed Lots of Metals


    ICS Code

    ICS Number Code 77.140.20 (Steels of high quality); 23.040.40 (Metal fittings)

    UNSPSC Code

    UNSPSC Code 40171521(Commercial welded stainless steel pipe)


    DOI: 10.1520/A0960_A0960M-10

    ASTM International is a member of CrossRef.


    Citing ASTM Standards
    Back to Top