Standard Historical Last Updated: Jul 17, 2013 Track Document
ASTM A908-03(2008)e1

Standard Specification for Stainless Steel Needle Tubing

Standard Specification for Stainless Steel Needle Tubing A0908-03R08E01 ASTM|A0908-03R08E01|en-US Standard Specification for Stainless Steel Needle Tubing Standard new BOS Vol. 01.01 Committee A01
$ 66.00 In stock

Abstract

The specification covers austenitic, stainless steel, needle tubing in hard-drawn tempers for industrial application. An electric furnace or other similar primary melting process with or without degassing or refining may be used. Needle tubing shall be made by the seamless or welded and drawn process and shall be furnished in the hard-drawn temper condition. Tension tests shall be made to meet the required tensile requirements.

Scope

1.1 This specification covers austenitic, stainless steel, needle tubing in hard-drawn tempers for industrial applications.

1.2 In general, needle tubing describes small-diameter tubing with outside diameters (ODs) in the range of 0.008 to 0.203 in. (0.2 to 5.2 mm) with nominal wall thicknesses in the range of 0.002 to 0.015 in. (0.05 to 0.4 mm). Needle tubing gages are normally 6 through 33.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.01
Developed by Subcommittee: A01.10
Pages: 2
DOI: 10.1520/A0908-03R08E01
ICS Code: 11.040.20