ASTM A898/A898M-07

    Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes


      Format Pages Price  
    PDF 3 $45.60   ADD TO CART


    1. Scope

    1.1 This specification covers the procedure and acceptance standards for straight beam, pulse echo, ultrasonic examination of rolled structural shapes having a minimum section thickness of 1/2 in. [12.5 mm]. It was developed to ensure delivery of steel structural shapes free of gross internal discontinuities such as pipe, ruptures, or laminations and is to be used whenever the inquiry, contract, order, or specification states that the shapes are to be ultrasonically examined. Two levels of acceptance standards are included. Level II is intended for normal applications where freedom from gross internal discontinuities is desired, particularly in connection regions. Level I is intended for critical applications such as welded chord members used in tension loading, where internal discontinuities could be detrimental. Level II is normally applicable unless otherwise specified in contract documents or the purchase order. Supplementary requirements for alternative scanning coverages are provided.

    1.2 The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    A6/A6M Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    E317 Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments


    ICS Code

    ICS Number Code 77.040.20 (Non-destructive testing of metals)

    UNSPSC Code

    UNSPSC Code 30100000(Structural components and basic shapes)


    Referencing This Standard

    DOI: 10.1520/A0898_A0898M-07

    ASTM International is a member of CrossRef.


    Citation Format

    ASTM A898 / A898M-07, Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes, ASTM International, West Conshohocken, PA, 2007, www.astm.org

    Back to Top