You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    ASTM A872/A872M-04

    Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments


      Format Pages Price  
    PDF 4 $45.60   ADD TO CART


    1. Scope

    1.1 This specification covers centrifugally cast ferritic/austenitic steel pipe intended for general corrosive service. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures.

    1.2 Optional supplementary requirements are provided when additional testing may be required.

    1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of each other. Combining values from the two systems may result in nonconformance with the specification.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    A488/A488M Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

    A781/A781M Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A999/A999M Specification for General Requirements for Alloy and Stainless Steel Pipe

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E94 Guide for Radiographic Examination

    E165 Practice for Liquid Penetrant Examination for General Industry

    E186 Reference Radiographs for Heavy-Walled (2 to 412-in. (50.8 to 114-mm)) Steel Castings

    E280 Reference Radiographs for Heavy-Walled (412 to 12-in. (114 to 305-mm)) Steel Castings

    E340 Test Method for Macroetching Metals and Alloys

    E446 Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness

    ASME Boiler and Pressure Vessel Code

    Section IX Welding Qualifications Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Two Park Ave., New York, NY 10016-5990, http://www.asme.org.

    ASTM Adjunct

    Adjunct Reference Radiographs--Transparencies in Ringbinders, 2 Volumes Available from ASTM International Headquarters. Request for Vol I and for Vol II.

    Adjunct Reference Radiographs--Transparencies in Ringbinders, 3 Volumes Available from ASTM International Headquarters. Request for Vol I, for Vol II, and for Vol III.

    Adjunct Reference Radiographs--Transparencies in Ringbinders, 3 Volumes Available from ASTM International Headquarters. Request for Vol I, for Vol II, and for Vol III.


    ICS Code

    ICS Number Code 77.140.75 (Steel pipes and tubes for specific use)

    UNSPSC Code

    UNSPSC Code 31102004(Stainless steel centrifugal casting)


    Referencing This Standard

    DOI: 10.1520/A0872_A0872M-04

    ASTM International is a member of CrossRef.


    Citation Format

    ASTM A872 / A872M-04, Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments, ASTM International, West Conshohocken, PA, 2004, www.astm.org

    Back to Top