ASTM A834-95(2006)

    Historical Standard: ASTM A834-95(2006) Standard Specification for Common Requirements for Iron Castings for General Industrial Use

    SUPERSEDED (see Active link, below)


    Buy Standard (PDF)
    4 pages
    $44.40

    Active (view current version of standard)


    ASTM A834

    1. Scope

    1.1 This specification covers a group of requirements that are mandatory requirements when used in conjunction with the following iron casting specifications issued by ASTM:

    ASTM Specification2
    A 47/A 47M
    A 48/A 48M
    A 197/A 197M
    A 220/A 220M
    A 278
    A 319
    A 395/A 395M
    A 436
    A 439
    A 518/A 518M
    A 532/A 532M
    A 536
    A 571/A 571M
    A 823
    A 842
    A 874/A 874M
    A 897/A 897M

    1.2 This specification also covers a group of supplementary requirements which may be applied to the above specifications as indicated herein. These are provided for use when additional testing or inspection is desired and apply only when specified individually by the purchaser in the order.

    1.3 The requirements of the individual material specification, and this general specification shall prevail in the sequence named.

    1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    A47/A47M Specification for Ferritic Malleable Iron Castings

    A48/A48M Specification for Gray Iron Castings

    A197/A197M Specification for Cupola Malleable Iron

    A220/A220M Specification for Pearlitic Malleable Iron

    A247 Test Method for Evaluating the Microstructure of Graphite in Iron Castings

    A278/A278M Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650F (350C)

    A319 Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts

    A395/A395M Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A436 Specification for Austenitic Gray Iron Castings

    A439 Specification for Austenitic Ductile Iron Castings

    A518/A518M Specification for Corrosion-Resistant High-Silicon Iron Castings

    A532/A532M Specification for Abrasion-Resistant Cast Irons

    A536 Specification for Ductile Iron Castings

    A571/A571M Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

    A644 Terminology Relating to Iron Castings

    A802/A802M Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

    A823 Specification for Statically Cast Permanent Mold Gray Iron Castings

    A842 Specification for Compacted Graphite Iron Castings

    A874/A874M Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

    A897/A897M Specification for Austempered Ductile Iron Castings

    A919 Terminology Relating to Heat Treatment of Metals

    E8 Test Methods for Tension Testing of Metallic Materials

    E10 Test Method for Brinell Hardness of Metallic Materials

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E30 Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron

    E59 Practice for Sampling Steel and Iron for Determination of Chemical Composition

    E94 Guide for Radiographic Examination

    E165 Practice for Liquid Penetrant Examination for General Industry

    E351 Test Methods for Chemical Analysis of Cast Iron--All Types

    E689 Reference Radiographs for Ductile Iron Castings

    E709 Guide for Magnetic Particle Testing

    E802 Reference Radiographs for Gray Iron Castings Up to 412 in. (114 mm) in Thickness

    Federal Standard

    Fed.Std.No.123 Marking for Shipment (Civil Agencies)

    Military Standard

    MIL-STD-129 Marking for Shipment and Storage Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://www.dodssp.daps.mil.


    ICS Code

    ICS Number Code 77.140.80 (Iron and steel castings)

    UNSPSC Code

    UNSPSC Code 31100000(Castings and casting assemblies)


    DOI: 10.1520/A0834-95R06

    ASTM International is a member of CrossRef.


    Citing ASTM Standards
    Back to Top