SUPERSEDED (click for Active standard)
| ||Format||Pages||Price|| |
|5||$51.60||  ADD TO CART|
1.1 This specification covers cold-rolled carbon sheet steel used for magnetic applications. These products, commonly called "cold-rolled magnetic lamination steel" (CRML) are usually intended for applications where the stamped laminations or assembled core structures for electrical equipment are annealed to develop the desired core loss and permeability characteristics.
1.2 By using appropriate lamination annealing practices, the purchaser can optimize magnetic properties for the various types.
1.3 A non-guaranteed core-loss type is usually made to controlled chemical composition. However, magnetic properties are not guaranteed by the producer.
1.4 Higher quality core-loss types are made to controlled chemical composition and are usually given critical reduction on a temper mill to yield specified magnetic properties after a suitable lamination anneal. These products, typically called semiprocessed lamination steel, are classified by the ASTM Code Letter D in accordance with Specification A664.
1.5 The values stated in inch-pound, cgs, and em units are to be regarded as standard.Note 1-A complete metric companion to Specification A726 has been developed-A726M; therefore, no metric equivalents are presented in this specification.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A340 Terminology of Symbols and Definitions Relating to Magnetic Testing
A343/A343M Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A664 Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
E18 Test Methods for Rockwell Hardness of Metallic Materials
E140 Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ICS Number Code 77.140.40 (Steels with special magnetic properties)
UNSPSC Code 31380000(Magnets and magnetic materials)
ASTM A726-00, Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types, ASTM International, West Conshohocken, PA, 2000, www.astm.orgBack to Top