1. Scope
1.1 This specification covers carbon steel pipe made by the centrifugal casting process intended for use in high-temperature, high-pressure service. Pipe ordered under this specification shall be suitable for fusion welding, bending, and other forming operations.
1.2 Several grades of carbon steels are covered. Their compositions are given in Table 1.
1.3 Supplementary requirements (S1 to S9) of an optional nature are provided. The supplementary requirements call for additional tests to be made, and when desired shall be so stated in the order, together with the number of such tests required.
1.4 The values stated in inch-pound units are to be regarded as the standard.
2. Referenced Documents (purchase separately) 
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A530/A530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
E94 Guide for Radiographic Examination
E114 Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method
E125 Reference Photographs for Magnetic Particle Indications on Ferrous Castings
E142 Method for Controlling Quality of Radiographic Testing
E186 Reference Radiographs for Heavy-Walled (2 to 412-in. (50.8 to 114-mm)) Steel Castings
E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E446 Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ANSI Standards
B46.1 Surface Texture
MSS Standards
SP-54 Quality Standard for Steel Castings--Radiographic Inspection Method
Keywords
steel pipe-carbon steel; temperature service applications-high (steel)
ICS Code
ICS Number Code 77.140.75 (Steel pipes and tubes for specific use)
DOI: 10.1520/A0660-96R05
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]
