SUPERSEDED (click for Active standard)
| ||Format||Pages||Price|| |
|6||$54.00||  ADD TO CART|
1.1 This specification covers the chemical and mechanical requirements of hexagon and square-head zinc-coated steel bolts and atmospheric corrosion-resistant bolts, in nominal thread diameters of 1/2, 5/8, 3/4, 7/8 and 1 in. for use in the construction of transmission towers, substations, and similar steel structures. The various types of bolts covered in this specification are:
1.1.1 Type 0 -Zinc-coated bolts made of low or medium carbon steel.
1.1.2 Type 1 -Zinc-coated bolts made of medium carbon steel, quenched and tempered.
1.1.3 Type 2 -Zinc-coated bolts made from what is generally described as low-carbon martensite steel, quenched and tempered.
1.1.4 Type 3 -Bare (uncoated), quenched and tempered bolts made of steel having atmospheric corrosion-resistance and weathering characteristics comparable to that of the steel covered in Specifications A242/A242M, A588/A588M, and A709/A709M. The atmospheric corrosion resistance of these steels is substantially better then that of carbon steel with or without copper addition (see 5.4). When properly exposed to the atmosphere, these steels can be used bare (uncoated) for many applications.
1.1.5 For applications requiring improved low-temperature characteristics, use of Types 1, 2, or 3 bolts is recommended.
1.3 Unless otherwise specified, all nuts used on these bolts shall be hex style and conform to the requirements of Specification
1.4 Suitable washers for use with Type 0 are zinc-coated carbon-steel washers with dimensions that are in accordance with Specification F436. Suitable washers for use with Type 1 and Type 2 bolts are zinc-coated Type 1 hardened-steel washers that are in accordance with Specification F436. Suitable washers for use with Type 3 bolts are Type 3 hardened-steel washers that are in accordance with Specification F436.
1.5 Nuts and washers that are supplied under this specification that are zinc coated shall be in accordance with 4.4.
1.6 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A563 Specification for Carbon and Alloy Steel Nuts
D3951 Practice for Commercial Packaging
F436 Specification for Hardened Steel Washers
F606/F606M Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
F788/F788M Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
F1470 Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
F1789 Terminology for F16 Mechanical Fasteners
F2329 Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
G101 Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
ASME StandardsB1.1 Unified Screw Threads B18.2.1 Square and Hex Bolts and Screws B18.24 Part Identifying Number (PIN) Code System Standard for Fastener Products
ICS Number Code 21.060.10 (Bolts, screws, studs); 29.240.20 (Power transmission and distribution lines)
UNSPSC Code 11101704(Steel); 31161600(Bolts)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM A394-00, Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare, ASTM International, West Conshohocken, PA, 2000, www.astm.orgBack to Top