Standard Historical Last Updated: Sep 14, 2016 Track Document
ASTM A369/A369M-11

Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service A0369_A0369M-11 ASTM|A0369_A0369M-11|en-US Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service Standard new BOS Vol. 01.01 Committee A01
$ 75.00 In stock

Abstract

This guide specifies standard specification for heavy-wall carbon and alloy steel pipe made from turned and bored forgings and is intended for high-temperature service. Heat and product analysis shall be conducted on several grades of ferritic steels, wherein the material shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, chromium, and molybdenum. The steel pipe shall conform to the required tensile properties like tensile strength, yield strength, and elongation. Required mechanical tests for the steel pipe include transverse or longitudinal tension test, flattening test, and bend test.

Scope

1.1 This specification covers heavy-wall carbon and alloy steel pipe (Note 1) made from turned and bored forgings and is intended for high-temperature service. Pipe ordered under this specification shall be suitable for bending and other forming operations and for fusion welding. Selection will depend on design, service conditions, mechanical properties and high-temperature characteristics.

Note 1—The use of the word pipe throughout the several sections of this specification is used in the broad sense and intended to mean pipe headers, or leads.

Note 2—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as nominal diameter, size, and nominal size.

1.2 Several grades of ferritic steels are covered. Their compositions are given in Table 1.

1.3 Supplementary requirements (S1 to S6) of an optional nature are provided. These supplementary requirements call for additional tests to be made, and when desired shall be so stated in the order, together with the number of such tests required.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the M designation of this specification is specified in the order.

TABLE 1 Chemical Requirements

GradeComposition, %
FPAFPBFP1 FP2
Carbon0.25 max0.30 max 0.100.200.100.20
Manganese0.270.930.291.060.300.800.300.61
Phosphorus, max0.0350.0350.0250.025
Sulfur, max0.0350.035 0.0250.025
Silicon0.10 min0.10 min0.100.500.100.30
Chromium.........0.500.81
Molybdenum...... 0.440.650.440.65
Grade FP5FP9FP11FP12
Carbon0.15 max0.15 max 0.050.150.050.15
Manganese0.300.600.300.600.300.600.300.61
Phosphorus, max0.0250.0300.0250.025
Sulfur, max0.0250.030 0.0250.025
Silicon0.50 max0.501.000.501.000.50 max
Chromium4.006.008.0010.001.001.500.801.25
Molybdenum0.450.650.901.10 0.440.650.440.65
GradeFP21FP22FP91FP92
Carbon0.050.15 0.050.150.080.120.070.13
Manganese0.300.60 0.300.600.300.600.300.60
Phosphorus, max0.025 0.0250.0250.020
Sulfur, max0.0250.0250.0250.010
Silicon0.50 max0.50 max0.200.500.50 max
Chromium2.653.35 1.902.608.009.508.509.50
Molybdenum0.801.06 0.871.130.851.050.300.60
Others: W 1.502.00
Ni 0.40 max V 0.150.25
V 0.180.25 Cb 0.040.09
Cb 0.060.10 N 0.0300.070
N 0.030.07 Ni 0.40 max
Al 0.02 max Al 0.02 max
Ti 0.01 maxTi 0.01 max
Zr 0.01 maxZr 0.01 max
B 0.0010.006
Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.01
Developed by Subcommittee: A01.10
Pages: 5
DOI: 10.1520/A0369_A0369M-11
ICS Code: 23.040.10