SUPERSEDED (see Active link, below)
Active (view current version of standard)
1.1 This specification covers ferritic steel forgings for boilers, pressure vessels, high-temperature parts, and associated equipment.
1.2 Forgings made of steel grades listed in Specification A 335/A 335M
Current Formerly Grade F1 Class F1 Grade F11, Class 2 Class F11 Grade F11, Class 3 Class F11A Grade F11, Class 1 Class F11B Grade F12 Class F12 Grade F5 Class F5 Grade F5A Class F5A Grade F9 Class F9 Grade F6 Class F6 Grade F21 Class 1 Class F21A Grade F21, Class 3 Class F21 Grade F22, Class 1 Class F22A Grade F22, Class 3 Class F22 Grade F91 Class F91 Grade F3V Class F3V Grade F22V Class F22V
1.3 Supplementary Requirements S1 to S9 are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order.
1.4 Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch-pound units.
1.5 Specification A 336/A 336M formerly included austenitic steel forgings, which are now found in Specification A 965/A 965M
1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A275/A275M Practice for Magnetic Particle Examination of Steel Forgings
A335/A335M Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A788/A788M Specification for Steel Forgings, General Requirements
A965/A965M Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
E165 Practice for Liquid Penetrant Examination for General Industry
ASME Boiler and Pressure Vessel CodeSectionIX Welding and Brazing Qualifications
AWS SpecificationsA5.29/A5.29M Low-Alloy Steel Electrodes for Flux Cored Arc Welding
ICS Number Code 77.140.85 (Iron and steel forgings)