Standard Historical Last Updated: Feb 23, 2021 Track Document
ASTM A1016/A1016M-08

Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes A1016_A1016M-08 ASTM|A1016_A1016M-08|en-US Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes Standard new BOS Vol. 01.01 Committee A01
$ 83.00 In stock

Abstract

This specification covers general requirements for ferritic alloy steel, austenitic alloy steel, and stainless steel tubes. The steel shall made by any process. The material shall conform to the tensile property requirements prescribed in the individual product specification. Yield strength tests and elongation tests shall be made to conform to the requirements. Flattening test, reverse flattening test, reverse bend test, flaring test, flange test, hardness test, ultrasonic test, eddy current test, flux leakage test, and hydrostatic test shall be made to conform to the requirements specified.

Scope

1.1 This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.

Title of SpecificationASTM
DesignationA
Seamless Carbon-Molybdenum Alloy-Steel Boiler and
Superheater Tubes
A 209/A 209M
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater,
and Heat-Exchanger Tubes
A 213/A 213M
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger,
and Condenser Tubes
A 249/A 249M
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and
Superheater Tubes
A 250/A 250M
Seamless and Welded Ferritic and Martensitic Stainless Steel
Tubing for General Service
A 268/A 268M
Seamless and Welded Austenitic Stainless Steel Tubing for
General Service
A 269
Seamless and Welded Austenitic Stainless Steel Sanitary TubingA 270
Seamless and Welded Carbon and Alloy-Steel Tubes for
Low-Temperature Service
A 334/A 334M
Welded Austenitic Stainless Steel Feedwater Heater TubesA 668/A 668M
Austenitic Stainless Steel Tubing for Breeder Reactor Core
Components
A 771/A 771M
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing
for General Service
A 789/A 789M
Welded Ferritic Stainless Steel Feedwater Heater TubesA 803/A 803M
Austenitic and Ferritic Stainless Steel Duct Tubes for Breeder
Reactor Core Components
A 826/A 826M
High-Frequency Induction Welded, Unannealed Austenitic Steel
Condenser Tubes
A 851

A These designations refer to the latest issue of the respective specifications.

1.2 In the case of conflict between a requirement of a product specification and a requirement of this general requirements specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this general requirements specification and a more stringent requirement of the purchase order, the purchase order shall prevail.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the M designation (SI) of the product specification is specified in the order.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.01
Developed by Subcommittee: A01.10
Pages: 11
DOI: 10.1520/A1016_A1016M-08
ICS Code: 77.140.20