Standard Historical Last Updated: Jun 10, 2015 Track Document
ASTM A1007-07

Standard Specification for Carbon Steel Wire for Wire Rope

Standard Specification for Carbon Steel Wire for Wire Rope A1007-07 ASTM|A1007-07|en-US Standard Specification for Carbon Steel Wire for Wire Rope Standard new BOS Vol. 01.03 Committee A01
$ 75.00 In stock

Abstract

This specification covers uncoated and four classes of round, metallic coated, cold-drawn, carbon steel wire rope in five strength levels. The following materials testing procedures shall be conducted: standard tensile testing; alternate tensile testing; torsion testing; and wrap testing. The wire diameter tolerances of uncoated, drawn-galvanized or drawn-Zn5 Al-MM, and final-galvanized or final-coated Zn5 Al-MM rope wires shall be described. Minimum breakage forces for the carbon steel wire rope shall also be presented. During torsion testing, varying amounts of load shall be applied to the wire being tested.

Scope

1.1 This specification covers uncoated and four classes of round, metallic coated, cold-drawn, carbon steel wire for wire rope in five strength levels. This specification specifies:

1.1.1 Dimensional tolerances,

1.1.2 Mechanical characteristics,

1.1.3 Chemical composition requirements,

1.1.4 Coating requirements (if applicable), and

1.1.5 Packaging requirements.

1.2 The values stated for metric equivalents are provided for informational purposes only.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.03
Developed by Subcommittee: A01.03
Pages: 10
DOI: 10.1520/A1007-07
ICS Code: 77.140.65