Standards Search: G

G1-03(2011) Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens

G2/G2M-06(2011) Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C] or in Steam at 750°F [400<

G3-89(2010) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing

G3-RUS-89(2010) Стандартная методика использования соглашений, применяемых в электрохимических измерениях при коррозионных испытаниях

G4-01(2008) Standard Guide for Conducting Corrosion Tests in Field Applications

G5-13 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements

G6-07(2013) Standard Test Method for Abrasion Resistance of Pipeline Coatings

G7/G7M-13 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials

G8-96(2010) Standard Test Methods for Cathodic Disbonding of Pipeline Coatings

G8-RUS-96(2010) Стандартный метод испытания для проверки катодного отслаивания покрытий трубопроводов

G9-07(2013)e1 Standard Test Method for Water Penetration into Pipeline Coatings

G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings

G11-04(2012) Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings

G12-07(2013) Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel

G14-04(2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)

G16-95(2010) Standard Guide for Applying Statistics to Analysis of Corrosion Data

G17-07(2013) Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)

G18-07(2013) Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines

G20-10 Standard Test Method for Chemical Resistance of Pipeline Coatings

G20-RUS-10 Стандартный метод испытаний для определения химической стойкости покрытий трубопроводов

G21-09 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi

G21-RUS-09 Стандартная методика определения плеснестойкости синтетических полимерных материалов

G24-13 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass

G28-02(2008) Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

G28-RUS-02(2008) Стандартные методы определения восприимчивости к межкристаллитной коррозии деформируемых хромсодержащих сплавов, обогащенных никелем

G29-96(2010) Standard Practice for Determining Algal Resistance of Plastic Films

G30-97(2009) Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens

G32-10 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus

G33-99(2010) Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens

G34-01(2013) Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)

G35-98(2010) Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids

G36-94(2013) Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution

G37-98(2011) Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys

G38-01(2013) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens

G39-99(2011) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens

G40-13 Standard Terminology Relating to Wear and Erosion

G41-90(2013) Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment

G42-11 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures

G44-99(2013) Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5?% Sodium Chloride Solution

G46-94(2013) Standard Guide for Examination and Evaluation of Pitting Corrosion

G47-98(2011) Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products

G48-11 : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

G49-85(2011) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens

G50-10 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals

G51-95(2012) Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing

G52-00(2011) Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater

G55-07(2013) Standard Test Method for Evaluating Pipeline Coating Patch Materials

G56-10 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials

G57-06(2012) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method

G58-85(2011) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments

G59-97(2009) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements

G60-01(2013) Standard Practice for Conducting Cyclic Humidity Exposures

G61-86(2009) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys

G62-07(2013) Standard Test Methods for Holiday Detection in Pipeline Coatings

G63-99(2007) Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service

G64-99(2013) Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys

G65-04(2010) Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus

G66-99(2013) Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)

G67-13 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)

G69-12 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys

G71-81(2009) Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes

G72/G72M-09 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment

G73-10 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus

G74-08 Standard Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact

G75-07 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)

G76-13 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets

G77-05(2010) Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test

G78-01(2012) Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments

G81-97a(2007) Standard Test Method for Jaw Crusher Gouging Abrasion Test

G82-98(2009) Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance

G84-89(2012) Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing

G85-11 Standard Practice for Modified Salt Spray (Fog) Testing

G86-98a(2011) Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments

G87-02(2013) Standard Practice for Conducting Moist SO2 Tests

G88-05 Standard Guide for Designing Systems for Oxygen Service

G90-10 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight

G91-11 Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation

G92-86(2010) Standard Practice for Characterization of Atmospheric Test Sites

G93-03(2011) Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments

G94-05 Standard Guide for Evaluating Metals for Oxygen Service

G95-07(2013) Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)

G96-90(2013) Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)

G97-97(2013) Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications

G98-02(2009) Standard Test Method for Galling Resistance of Materials

G99-05(2010) Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus

G100-89(2010)e1 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization

G101-04(2010) Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

G102-89(2010) Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements

G102-RUS-89(2010) Стандартная методика расчета скоростей коррозии и связанных с ней данных по результатам электрохимических измерений

G103-97(2011) Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution

G105-02(2007) Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests

G106-89(2010) Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements

G107-95(2008) Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input

G108-94(2010) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels

G109-07(2013) Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments

G110-92(2009) Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution

G111-97(2013) Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

G112-92(2009) Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys

G113-09 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

G114-07 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service

G115-10 Standard Guide for Measuring and Reporting Friction Coefficients

G116-99(2010) Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion

G117-13 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests

G118-02(2007) Standard Guide for Recommended Format of Wear Test Data Suitable for Databases

G119-09 Standard Guide for Determining Synergism Between Wear and Corrosion

G120-01(2008) Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction

G121-98(2010)e1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents

G122-96(2008) Standard Test Method for Evaluating the Effectiveness of Cleaning Agents

G123-00(2011) Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution

G124-10 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres

G125-00(2008) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants

G126-00(2008) Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres

G127-95(2008) Standard Guide for the Selection of Cleaning Agents for Oxygen Systems

G128-02(2008) Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems

G129-00(2013) Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking

G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer

G131-96(2008) Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques

G132-96(2007) Standard Test Method for Pin Abrasion Testing

G133-05(2010) Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear

G134-95(2010)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet

G135-95(2013) Standard Guide for Computerized Exchange of Corrosion Data for Metals

G136-03(2009) Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction

G137-97(2009) Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration

G138-12 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance

G139-05(2011) Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method

G140-02(2008) Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method

G141-09 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials

G142-98(2011) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

G143-03(2009) Standard Test Method for Measurement of Web/Roller Friction Characteristics

G144-01(2006) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer

G145-08 Standard Guide for Studying Fire Incidents in Oxygen Systems

G146-01(2013) Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service

G147-09 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests

G148-97(2011) Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique

G150-13 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels

G151-10 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

G152-13 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

G153-13 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

G154-12a Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

G155-13 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

G156-09 Standard Practice for Selecting and Characterizing Weathering Reference Materials

G157-98(2013) Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries

G158-98(2010) Standard Guide for Three Methods of Assessing Buried Steel Tanks

G160-12 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial

G161-00(2013) Standard Guide for Corrosion-Related Failure Analysis

G162-99(2010) Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils

G163-10 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements

G164-99(2009) Standard Test Method for Determination of Surface Lubrication on Flexible Webs

G165-99(2012) Standard Practice for Determining Rail-to-Earth Resistance

G166-00(2011) Standard Guide for Statistical Analysis of Service Life Data

G167-05(2010) Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer

G168-00(2013) Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens

G169-01(2013) Standard Guide for Application of Basic Statistical Methods to Weathering Tests

G170-06(2012) Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

G171-03(2009)e2 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus

G172-03(2010) Standard Guide for Statistical Analysis of Accelerated Service Life Data

G173-03(2012) Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface

G174-04(2009)e1 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact

G175-03(2011) Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications

G176-03(2009) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method

G177-03(2012) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface

G178-09 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique

G179-04(2011) Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests

G180-13 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries

G181-11 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions

G182-06 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings

G183-05(2010) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers

G184-06(2012) Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage

G185-06(2012) Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode

G186-05(2011) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys

G187-12a Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method

G188-05(2011) Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys

G189-07(2013) Standard Guide for Laboratory Simulation of Corrosion Under Insulation

G190-06 Standard Guide for Developing and Selecting Wear Tests

G192-08 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique

G194-08 Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane

G195-13 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser

G196-08 Standard Test Method for Galling Resistance of Material Couples

G197-08(2012) Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces

G198-11 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood

G199-09 Standard Guide for Electrochemical Noise Measurement

G200-09 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil

G201-09 Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation

G202-12 Standard Test Method for Using Atmospheric Pressure Rotating Cage

G203-10 Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems

G204-10 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions

G205-10 Standard Guide for Determining Corrosivity of Crude Oils

G206-11 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests

G207-11 Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers

G208-12 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus

G209-13 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys