|
F4-66(2005) Standard Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes
F7-95(2006) Standard Specification for Aluminum Oxide Powder
F14-80(2005) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
F15-04 Standard Specification for Iron-Nickel-Cobalt Sealing Alloy
F16-67(2006) Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
F17-08 Standard Terminology Relating to Flexible Barrier Packaging
F18-64(2006) Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices
F19-64(2005)e1 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
F21-65(2007) Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
F22-02(2007) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
F24-09 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
F25/F25M-09 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
F29-97(2009) Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications
F30-96(2009) Standard Specification for Iron-Nickel Sealing Alloys
F31-05 Standard Specification for 42% Nickel-6% Chromium-Iron Sealing Alloy
F34-02(2007) Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
F36-99(2003) Standard Test Method for Compressibility and Recovery of Gasket Materials
F37-06 Standard Test Methods for Sealability of Gasket Materials
F38-00(2006) Standard Test Methods for Creep Relaxation of a Gasket Material
F44-95(2006) Standard Specification for Metallized Surfaces on Ceramic
F50-07 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
F67-06 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
F68-05e1 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
F72-06 Standard Specification for Gold Wire for Semiconductor Lead Bonding
F73-96(2009) Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
F75-07 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
F76-08 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
F79-69(2005) Standard Specification for Type 101 Sealing Glass
F83-71(2009) Standard Practice for Definition and Determination of Thermionic Constants of Electron Emitters
F85-76(2009) Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes
F86-04 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
F88/F88M-09 Standard Test Method for Seal Strength of Flexible Barrier Materials
F90-09 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
F91-06 Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
F92-93(2008) Standard Practice for Determination of Character Yield of Inked Fabric Typewriter and Printer Ribbons
F96-77(2005) Standard Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms
F99-07 Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
F104-03 Standard Classification System for Nonmetallic Gasket Materials
F105-72(2005) Standard Specification for Type 58 Borosilicate Sealing Glass
F106-06 Standard Specification for Brazing Filler Metals for Electron Devices
F109-04(2009) Standard Terminology Relating to Surface Imperfections on Ceramics
F112-00(2006) Standard Test Method for Sealability of Enveloped Gaskets
F116-00(2009) Standard Specification for Medical Screwdriver Bits
F118-04 Standard Definitions of Terms Relating to Gaskets
F119-82(2008) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
F129-97(2008) Standard Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than Fabric Type
F136-08e1 Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
F137-08 Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
F138-08 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
F139-08 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
F140-98(2008) Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
F141-08a Standard Terminology Relating to Resilient Floor Coverings
F144-80(2005) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
F145-72(2003) Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
F146-04 Standard Test Methods for Fluid Resistance of Gasket Materials
F147-87(2003) Standard Test Method for Flexibility of Non-Metallic Gasket Materials
F148-02(2007) Standard Test Method for Binder Durability of Cork Composition Gasket Materials
F149-92b(2009) Standard Terminology Relating to Optical Character Recognition
F150-06 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
F152-95(2009) Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
F153-95(2008) Standard Test Method for Determining the Yield of Wide Inked Computer Ribbons
F180-94(2005) Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
F204-76(2009) Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire
F205-94(2005) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
F218-05 Standard Test Method for Analyzing Stress in Glass
F219-96(2009) Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps
F221-98(2003) Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom
F256-05e1 Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
F269-60(2009) Standard Test Method for Sag of Tungsten Wire
F288-96(2009) Standard Specification for Tungsten Wire for Electron Devices and Lamps
F289-96(2009) Standard Specification for Molybdenum Wire and Rod for Electronic Applications
F290-94(2005) Standard Specification for Round Wire for Winding Electron Tube Grid Laterals
F302-04 Standard Practice for Field Sampling of Aerospace Fluids in Containers
F303-08 Standard Practices for Sampling for Particles in Aerospace Fluids and Components
F307-02(2007) Standard Practice for Sampling Pressurized Gas for Gas Analysis
F309-04 Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
F310-07 Standard Practice for Sampling Cryogenic Aerospace Fluids
F311-08 Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
F312-08 Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
F316-03 Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
F318-06 Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
F319-09 Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
F320-05 Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
F326-96(2006) Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
F327-08 Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
F330-89(2004) Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
F331-05 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
F335-03(2009) Standard Terminology Relating to Electrostatic Copying
F336-02(2009) Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
F355-01 Standard Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials
F360-82(2006) Standard Practice for Image Evaluation of Electrostatic Business Copies
F362-91(2005) Standard Test Method for Determining the Erasability of Inked Ribbons
F363-99(2004) Standard Test Method for Corrosion Testing of Gaskets
F364-96(2009) Standard Specification for Molybdenum Flattened Wire for Electron Tubes
F366-04(2009) Standard Specification for Fixation Pins and Wires
F373-06 Standard Test Method for Embossed Depth of Resilient Floor Coverings
F375-89(2005) Standard Specification for Integrated Circuit Lead Frame Material
F377-03 Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
F381-09 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
F382-99(2008)e1 Standard Specification and Test Method for Metallic Bone Plates
F384-06e1 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
F386-02(2008) Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
F387-02(2008) Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
F390-98(2003) Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
F392-93(2004) Standard Test Method for Flex Durability of Flexible Barrier Materials
F395-03(2007) Standard Terminology Relating to Vacuum Cleaners
F396-00(2009) Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
F400-04 Standard Consumer Safety Specification for Lighters
F402-05 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
F404-08 Standard Consumer Safety Specification for High Chairs
F405-05 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
F406-09 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
F408-99(2008) Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
F409-02(2008) Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
F410-08 Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
F412-09 Standard Terminology Relating to Plastic Piping Systems
F414-09 Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
F415-87(2005) Standard Test Method for Curl in Carbon Paper
F420-04(2009) Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners
F421-07 Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires
F428-09 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
F429-01(2007) Standard Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football
F430-05 Standard Test Methods for Paper Used for Vacuum Cleaner Filter Bags
F431-04(2008) Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
F432-08 Standard Specification for Roof and Rock Bolts and Accessories
F433-02(2009) Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
F434-93(2003)e1 Standard Test Method for Blow-Out Testing of Preformed Gaskets
F436-09 Standard Specification for Hardened Steel Washers
F436M-09 Standard Specification for Hardened Steel Washers [Metric]
F437-09 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F438-09 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
F439-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F441/F441M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
F442/F442M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
F444-88(2009) Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
F445-88(2009) Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
F446-85(2009) Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
F448-99(2005) Test Method for Measuring Steady-State Primary Photocurrent
F449-02e1 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
F449-SP-02e1 Práctica Estándar para la instalación subterránea de tubería de polietileno corrugado para drenaje agrícola o control de nivel freático
F450-01(2005) Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic Wire Reinforced)
F451-08 Standard Specification for Acrylic Bone Cement
F452-76(2008) Standard Specification for Preformed Cranioplasty Plates
F457-04 Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
F458-06 Standard Practice for Nondestructive Pull Testing of Wire Bonds
F459-06 Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
F462-79(2007) Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities
F467M-06ae2 Standard Specification for Nonferrous Nuts for General Use (Metric)
F467-08e1 Standard Specification for Nonferrous Nuts for General Use
F468-06e1 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
F468M-06e1 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]
F470-89(2009) Standard Practice for Caking Temperature of Dry Electrostatic Toner
F471-76(2002) Standard Terminology Relating to Combination Locks
F472-92(2006) Standard Terminology for Geometry of Alpine Skis
F473-09 Standard Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings
F476-84(2002) Standard Test Methods for Security of Swinging Door Assemblies
F477-08 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F478-92(2007) Standard Specification for In-Service Care of Insulating Line Hose and Covers
F479-06 Standard Specification for In-Service Care of Insulating Blankets
F480-06b Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
F481-97(2008) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
F482-09 Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
F483-09 Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
F484-08 Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
F485-08 Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
F486-01(2006) Standard Practice for Preparation of Use and Care Booklets for Vacuum Cleaners
F487-88(2006) Standard Specification for Fine Aluminum-1% Silicon Wire for Semiconductor Lead-Bonding
F493-04 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
F494-05 Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
F495-99a(2004) Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
F496-08 Standard Specification for In-Service Care of Insulating Gloves and Sleeves
F497-00(2009) Standard Practice for Use of the Electric and Electronic Typewriter as a Test Instrument
F498-77(2006) Standard Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis
F502-08 Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
F504-05 Standard Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings
F505-87(2006) Standard Practice for Comparative Evaluation of Imaging Properties of Liquid Electrostatic Toners
F509-86(2009) Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes
F510-93(2008) Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
F511-04 Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
F512-06 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
F513-00(2007) Standard Safety Specification for Eye and Face Protective Equipment for Hockey Players
F519-08 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
F520-97(2004) Standard Test Method for Environmental Resistance of Aerospace Transparencies
F521-83(2004) Standard Test Methods for Bond Integrity of Transparent Laminates
F526-97(2003) Standard Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests
F528-99(2005) Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors
F537-01(2007) Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
F538-09 Standard Terminology Relating to the Characteristics and Performance of Tires
F539-01(2007) Standard Practice for Fitting Athletic Footwear
F541-04e1 Standard Specification for Alloy Steel Eyebolts
F542-07 Standard Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
F543-07e1 Standard Specification and Test Methods for Metallic Medical Bone Screws
F547-06 Standard Terminology of Nails for Use with Wood and Wood-Base Materials
F548-09 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
F549-85(2004) Standard Terminology Relating to Carbonless Copy Products
F551-09 Standard Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires
F552-02(2008) Standard Terminology Relating to Chain Link Fencing
F555-01(2006) Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
F556-88(2006) Standard Test Method for Curl of Carbonless Copy Papers
F558-06 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
F559-05 Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
F560-08 Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
F561-05a Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
F562-07 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
F564-02(2006)e1 Standard Specification and Test Methods for Metallic Bone Staples
F565-04(2009)e1 Standard Practice for Care and Handling of Orthopedic Implants and Instruments
F567-07 Standard Practice for Installation of Chain-Link Fence
F568M-07 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
F571-87(2008) Standard Practice for Installation of Exit Devices in Security Areas
F577-03(2009) Standard Test Method for Particle Size Measurement of Dry Toners
F584-06e1 Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
F585-94(2007) Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
F588-07 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
F589-06 Standard Consumer Safety Specification for Non-Powder Guns
F590-05 Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants
F592-84(2006) Standard Terminology of Collated and Cohered Fasteners and Their Application Tools
F593-02(2008) Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F594-08 Standard Specification for Stainless Steel Nuts
F595-01(2005) Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (All-Plastic Hose)
F596-09 Standard Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners
F597-83(2008) Standard Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter
F598-00(2009) Standard Practice for Determining the Resistance of Carbonless Papers to Capsular Damage
F601-03(2008) Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
F602-09 Standard Criteria for Implantable Thermoset Epoxy Plastics
F605-88(2006) Standard Practice for Determining Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set
F606-07 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
F606M-07e1 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]
F607-03(2008) Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
F608-09 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
F609-05 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
F610/F610M-00a(2009) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
F615M-95(2008) Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)
F616M-96(2003) Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
F619-03(2008) Standard Practice for Extraction of Medical Plastics
F620-06 Standard Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants
F621-08 Standard Specification for Stainless Steel Forgings for Surgical Implants
F622-79(2002) Standard Specification for Preformed Cranioplasty Plates That Can Be Altered
F623-99(2006) Standard Performance Specification for Foley Catheter
F624-09 Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
F625-94(2006) Standard Practice for Classifying Water Bodies for Spill Control Systems
F626-08 Standard Specification for Fence Fittings
F627-99(2008) Standard Practice for Testing Flake of Single-Strike Film Typewriter Ribbons
F628-08 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
F629-02(2007)e1 Standard Practice for Radiography of Cast Metallic Surgical Implants
F631-99(2008) Standard Guide for Collecting Skimmer Performance Data in Controlled Environments
F639-09 Standard Specification for Polyethylene Plastics for Medical Applications
F640-07 Standard Test Methods for Determining Radiopacity for Medical Use
F641-09 Standard Specification for Implantable Epoxy Electronic Encapsulants
F645-04 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
F647-94(2006) Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application
F648-07e1 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
F654-07 Standard Specification for Residential Chain Link Fence Gates
F655-06 Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing
F656-08 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
F659-06 Standard Specification for Skier Goggles and Faceshields
F660-83(2007) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
F665-09 Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
F667-06 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
F668-07 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
F670-02(2007) Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing
F676-97(2003) Standard Test Method for Measuring Unsaturated TTL Sink Current
F677-04 Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
F679-08 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
F680-80(2007) Standard Test Methods for Nails
F681-82(2008) Standard Practice for Use of Branch Connections
F682-82a(2008) Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
F683-08 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
F685-96(2006) Standard Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems
F686-94(2006) Standard Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter
F688-05 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
F689-97(2004) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
F690-86(2003)e2 Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
F693-01(2007) Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
F695-01(2009) Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials
F696-06 Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
F697-00(2006) Standard Practice for Care and Use of Athletic Mouth Protectors
F698-FRCA-94(2000) Spécifications standard concernant l’information physique à fournir pour les jeux et manèges
F698-SP-94(2000) Especificación estándar para Información Física que se Proporcionará para los Juegos Mecánicos y Dispositivos
F700-93(2008) Standard Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments
F701-81(2008) Standard Practice for Care and Handling of Neurosurgical Implants and Instruments
F702-98a(2003) Standard Specification for Polysulfone Resin for Medical Applications
F703-07 Standard Specification for Implantable Breast Prostheses
F704-81(2009) Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
F706-96(2006) Standard Practice for Determination of Fusion Temperature of Dry Electrostatic Heat-Fixing Toners
F707/F707M-94(2006) Standard Specification for Modular Gage Boards
F708-92(2008) Standard Practice for Design and Installation of Rigid Pipe Hangers
F710-08 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
F711-02(2007) Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
F712-06 Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers
F714-08 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
F715-07 Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
F716-09 Standard Test Methods for Sorbent Performance of Absorbents
F717-89(2006) Standard Specification for Football Helmets
F718-07 Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
F719-81(2007)e1 Standard Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation
F720-81(2007)e1 Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test
F721-81(2008) Standard Specification for Gage Piping Assemblies
F722-82(2008) Standard Specification for Welded Joints for Shipboard Piping Systems
F724-94a(2004) Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance
F725-03(2008)e1 Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
F726-06 Standard Test Method for Sorbent Performance of Adsorbents
F732-00(2006) Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
F733-09 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
F734-95(2006) Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
F735-06 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
F736-95(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
F738M-02(2008) Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
F739-07 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact
F744M-97(2003) Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits [Metric]
F745-07 Standard Specification for 18 Chromium-12.5 Nickel-2.5 Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications
F746-04 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
F747-06 Standard Terminology Relating to Amusement Rides and Devices
F747-FRCA-06 Terminologie standard au sujet des jeux et manèges
F747-SP-06 Terminología estándar relacionada con Juegos Mecánicos y Dispositivos
F748-06 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
F749-98(2007)e1 Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit
F750-87(2007)e1 Standard Practice for Evaluating Material Extracts by Systemic Injection in the Mouse
F754-08 Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders
F755-99(2005) Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
F756-08 Standard Practice for Assessment of Hemolytic Properties of Materials
F758-95(2007)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
F760-93(2006) Standard Specification for Food Service Equipment Manuals
F762/F762M-08 Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
F763-04 Standard Practice for Short-Term Screening of Implant Materials
F765-93(2006) Standard Specification for Wildcats, Ship Anchor Chain
F766-82(2005) Standard Test Method for Melting Point of Waxes
F767-98(2008) Standard Test Method for Image Stability of Chemical Carbonless Paper to Light
F770-06a Standard Practice for Ownership and Operation of Amusement Rides and Devices
F770-FRCA-06a Norme de pratique concernant la possession et l’exploitation des jeux et manèges
F770-SP-06a Práctica estándar para Propiedad y Operación de Juegos Mecánicos y Dispositivos
F771-99(2005) Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
F773M-96(2003) Practice for Measuring Dose Rate Response of Linear Integrated Circuits [Metric]
F778-88(2007) Standard Methods for Gas Flow Resistance Testing of Filtration Media
F779-93(2006) Standard Test Method for Torsion Characteristic of Alpine Skis
F780-93a(2006) Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis
F782-01(2007) Standard Specification for Doors, Furniture, Marine
F783-88(2008) Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung
F788/F788M-08 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
F790-08 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
F791-96(2008) Standard Test Method for Stress Crazing of Transparent Plastics
F792-08 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
F793-07 Standard Classification of Wall Covering by Use Characteristics
F794-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
F799-06 Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
F801-96(2008) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
F802-83(2003) Standard Guide for Selection of Certain Walkway Surfaces When Considering Footwear Traction
F803-03 Standard Specification for Eye Protectors For Selected Sports
F806-99a(2003)e1 Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
F807-83(2009) Standard Practice for Determining Resolution Capability of Office Copiers
F810-07 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
F811-02 Standard Practice for Accelerometer Use in Vehicles for Tire Testing
F812/F812M-07 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
F813-07 Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices
F818-93(2009) Standard Terminology Relating to Spill Response Barriers
F819-08 Standard Terminology Relating to Electrical Protective Equipment for Workers
F820-06 Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
F821/F821M-01(2007)e1 Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine
F822-93(2004) Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
F823-93(2004) Standard Specification for Desk, Log, Marine, Steel, with Cabinet
F824-93(2004) Standard Specification for Tables, Mess, Marine, Steel
F825-93(2004) Standard Specification for Drawers, Furniture, Marine, Steel
F826-94(2004) Standard Specification for Tops, Furniture, Marine, Steel
F832-90(2008) Standard Classification for Security Seals
F833-09 Standard Consumer Safety Performance Specification for Carriages and Strollers
F834-84(2008) Standard Consumer Safety Specification for Toy Chests
F835M-04 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
F835-04e1 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
F836M-02 Standard Specification for Style 1 Stainless Steel Metric Nuts
F837M-02a Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
F837-08 Standard Specification for Stainless Steel Socket Head Cap Screws
F838-05 Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
F839-83(2006) Standard Specification for Cautionary Labeling of Portable Gasoline Containers for Consumer Use
F841-84(2006) Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels
F842-04 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
F843-98(2008) Standard Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in Hot Melt Carbon Copy Paper Ink
F844-07a Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
F846-92(2009) Standard Guide for Testing Performance of Amusement Rides and Devices
F851-87(2005) Standard Test Method for Self-Rising Seat Mechanisms
F852-08 Standard Specification for Portable Gasoline Containers for Consumer Use
F853-05 Standard Practice for Maintenance Procedures for Amusement Rides and Devices
F853-FRCA-05 Norme de pratique concernant les procédures d’entretien des jeux et manèges
F853-SP-05 Práctica estándar para Procedimientos de Mantenimiento para Juegos Mecánicos y Dispositivos
F854-83(2008) Standard Test Method for Cleanliness of Carbon Paper
F855-09 Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
F856-97(2008) Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)
F857-07 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
F858-07 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type
F859-09 Standard Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type
F860-07 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
F861-94(2008)e1 Standard Specification for Commercial Dishwashing Racks
F862-93(2002) Standard Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
F868-02(2009) Standard Classification for Laminated Composite Gasket Materials
F869-01(2007) Standard Terminology Relating to Athletic Shoes and Biomechanics
F870-94(2005) Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
F873-84(2003) Standard Guide for Incinerating Oil Spill Wastes at Temporary Field Locations
F874-98(2008) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
F875-09 Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
F876-09 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
F877-07 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
F879-02a(2008) Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
F879M-02a(2008) Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
F880-02(2008) Standard Specification for Stainless Steel Socket-Set Screws
F880M-02(2008) Standard Specification for Stainless Steel Socket Set Screws (Metric)
F881-94(2006) Standard Specification for Silicone Elastomer Facial Implants
F882-84(2002) Standard Performance and Safety Specification for Cryosurgical Medical Instruments
F883-04 Standard Performance Specification for Padlocks
F884-01(2006) Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
F885-84(2006) Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS ¼ to 2
F887-05e1 Standard Specifications for Personal Climbing Equipment
F888-06 Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
F891-09 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
F893-05a Standard Guide for Inspection of Amusement Rides and Devices
F893-FRCA-05a Guide standard concernant l’inspection de jeux et manèges
F893-SP-05a Guía Estándar para Inspección de Juegos Mecánicos y Dispositivos
F894-07 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
F895-84(2006) Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
F897-02(2007) Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
F899-09 Standard Specification for Wrought Stainless Steels for Surgical Instruments
F900-05 Standard Specification for Industrial and Commercial Swing Gates
F901-01(2007) Standard Specification for Aluminum Transmission Tower Bolts and Nuts
F903-03(2004) Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
F904-98(2008) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
F905-04 Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
F906-85(2007) Standard Specification for Letters and Numerals for Ships
F909-94a(2006) Standard Terminology Relating to Printers
F910-04 Standard Specification for Face Guards for Youth Baseball
F912-04e1 Standard Specification for Alloy Steel Socket Set Screws
F912M-04e1 Standard Specification for Alloy Steel Socket Set Screws [Metric]
F913-02(2008) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F914-03 Standard Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments
F917-91(2008)e1 Standard Specification for Commercial Food Waste Disposers
F918-02 Standard Specification for Noncarbonated Mechanically Refrigerated, Beverage Dispenser (Visible Product)
F919-05 Standard Specification for Slicing Machines, Food, Electric
F921-85(2008)e1 Standard Terminology Relating to Hemostatic Forceps
F922-01(2006) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
F924-90(2009) Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings
F925-02(2008) Standard Test Method for Resistance to Chemicals of Resilient Flooring
F926-02(2007) Standard Specification for Cautionary Labeling of Portable Kerosine and Diesel Containers for Consumer Use
F934-96(2008) Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
F935-00(2009) Standard Test Method for Comparing Cover-Up Correction Media
F939-06 Standard Practice for Selection of Release Torque Values for Alpine Ski Bindings
F940-99(2009) Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
F941-99(2009) Standard Practice for Inspection of Marine Surface Preparation and Coating Application
F942-02(2008) Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
F945-06 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
F946-85(2004) Standard Guide for Establishing Security Seal Control and Accountability Procedures
F948-94(2006) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
F949-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
F952-08 Standard Specification for Mixing Machines, Food, Electric
F953-08 Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
F955-07 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
F956-91(2006) Standard Specification for Bell, Cast, Sound Signalling
F957-91(2006) Standard Specification for Gong, Sound Signaling
F959M-07 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]
F959-09 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
F961-08 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
F962-04 Standard Specification for Oil Spill Response Boom Connection: Z-Connector
F963-08 Standard Consumer Safety Specification for Toy Safety
F964-09 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
F967-03 Standard Practice for Security Engineering Symbols
F969-07 Standard Practice for Construction of Chain-Link Tennis Court Fence
F970-07 Standard Test Method for Static Load Limit
F974-06 Standard Practice for Determination of Color Response of Electrostatic Copying System, Black and White Output
F976-08 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use
F977-07 Standard Consumer Safety Specification for Infant Walkers
F980M-96(2003) Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices [Metric]
F981-04 Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone
F982-86(2008) Standard Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion
F983-86(2009) Standard Practice for Permanent Marking of Orthopaedic Implant Components
F985-00(2006) Standard Specification for Panama Canal Pilot Platform
F986-86(2008) Standard Specification for Suction Strainer Boxes
F987-04 Standard Specification for Portable Intermediate Flush Deck Stanchion
F991M-04(2008) Standard Specification for Docking/Drain Plug and Boss Assemblies [Metric]
F992-86(2006) Standard Specification for Valve Label Plates
F993-86(2006) Standard Specification for Valve Locking Devices
F994-86(2006) Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections
F995-09 Standard Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer
F996-98(2003) Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current-Voltage Characteristics
F997-98a(2003) Standard Specification for Polycarbonate Resin for Medical Applications
F998-04 Standard Specification for Centrifugal Pump, Shipboard Use
F1001-99a(2006) Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
F1002-06 Standard Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards
F1003-02(2007) Standard Specification for Searchlights on Motor Lifeboats
F1004-09 Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
F1005-91(2007) Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration
F1006-86(2008) Standard Specification for Entrainment Separators for Use in Marine Piping Applications
F1007-86(2007) Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
F1011-07 Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel
F1014-02(2007) Standard Specification for Flashlights on Vessels
F1015-03(2009) Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces
F1016-07 Standard Practice for Linear Tire Treadwear Data Analysis
F1018-87a(2004) Standard Specification for Steel Emergency Gear Stowage Locker
F1019M-00(2006) Standard Specification for Steel Deck Gear Stowage Box [Metric]
F1020-86(2006) Standard Specification for Line-Blind Valves for Marine Applications
F1021-95(2007) Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines
F1022-06 Standard Specification for Chemical Sanitizing Commercial Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type
F1023-99(2004) Standard Specification for Dispensers, Powdered Iced Tea
F1025-94(2006) Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
F1026-86(2008)e1 Standard Specification for General Workmanship and Performance Measurements of Hemostatic Forceps
F1027-86(2007) Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
F1030-86(2008) Standard Practice for Selection of Valve Operators
F1031-00(2006) Standard Practice for Training the Emergency Medical Technician (Basic)
F1033-00(2004) Standard Test Method for Comparing Lift-Off Correction Media
F1035-03(2008) Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
F1037-05 Standard Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic
F1038-02(2006) Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator
F1040-87(2007) Standard Specification for Filter Units, Air Conditioning: Viscous-Impingement and Dry Types, Replaceable
F1041-02(2008) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
F1042-87(2009) Standard Practice for Estimating Toner and Dispersant Usage in Copiers Utilizing Liquid Developers
F1043-08 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
F1044-05 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
F1045-07 Standard Performance Specification for Ice Hockey Helmets
F1046-01(2008) Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
F1047-04 Standard Specification for Frying and Braising Pans, Tilting Type
F1050-87(2005) Standard Test Method for Determining Winding Torque and Tension of Typewriter Ribbons
F1051-00(2009) Standard Test Method for Comparing Multistrike Film Ribbons
F1052-09 Standard Test Method for Pressure Testing Vapor Protective Ensembles
F1055-98(2006) Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
F1056-04 Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
F1057-87(2005) Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
F1058-08 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)
F1060-08 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact
F1061-08 Standard Specification for Ski Binding Test Devices
F1062-97(2008) Standard Test Method for Verification of Ski Binding Test Devices
F1063-09 Standard Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems
F1064-07 Standard Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications
F1066-04 Standard Specification for Vinyl Composition Floor Tile
F1068-90(2007) Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
F1069-87(2004) Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
F1070-87(2004) Standard Specification for Doors, Non-Tight, for Marine Use
F1071-94(2006) Standard Specification for Expanded-Metal Bulkhead Panels
F1072-94(2006) Standard Specification for Expanded-Metal Doors
F1073-87(2007) Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
F1074-87(2007) Standard Specification for Cleats, Welded Horn Type
F1075-97(2008) Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
F1076-87(2004) Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
F1077-05 Standard Guide for Selection of Committee F16 Fastener Specifications
F1078-87(2008)e1 Standard Terminology for Surgical Scissors—Inserted and Non-Inserted Blades
F1079-87(2008)e1 Standard Specification for Inserted and Noninserted Surgical Scissors
F1080-93(2008) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
F1081-97(2003)e1 Standard Specification for Competition Wrestling Mats
F1083-08 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
F1084-08 Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
F1085-08a Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
F1086-94(2008) Standard Guide for Structures and Responsibilities of Emergency Medical Services Systems Organizations
F1087-02(2009) Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
F1088-04ae1 Standard Specification for Beta-Tricalcium Phosphate for Surgical Implantation
F1089-02 Standard Test Method for Corrosion of Surgical Instruments
F1090-06 Standard Classification for Bank and Mercantile Vault Construction
F1091-08 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)
F1092-04 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
F1093-99(2007) Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
F1094-87(2005) Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
F1097-91(2006) Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)
F1098-87(2004) Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24
F1099M-98(2005) Standard Specification for Rat Guards, Ship's (Metric)
F1101-90(2003)e1 Standard Specification for Ventilators Intended for Use During Anesthesia
F1104-02(2008) Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
F1105-09 Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
F1106-87(2006) Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)
F1107-04 Standard Terminology Relating to Snowboarding
F1108-04(2009) Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
F1110-09 Standard Test Method for Sandwich Corrosion Test
F1111-08b Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
F1112-06a Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure
F1113-87(2005)e1 Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
F1114-06 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray
F1115-95(2008)e1 Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
F1116-03(2008) Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
F1117-03(2008) Standard Specification for Dielectric Footwear
F1120-87(2004) Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
F1121-87(2004) Standard Specification for International Shore Connections for Marine Fire Applications
F1122-04 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
F1123-87(2004) Standard Specification for Non-Metallic Expansion Joints
F1125-87(2006) Standard Terminology of Image Quality in Impact Printing Systems
F1126-08 Standard Specification for Food Cutters (Electric)
F1127-07 Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel
F1129-01 Standard Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids
F1130-99(2009) Standard Practice for Inspecting the Coating System of a Ship
F1134-94(2007) Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
F1135-99(2004) Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
F1136-04 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
F1136M-04 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric]
F1137-00(2006) Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners
F1138-98(2007) Standard Specification for Spray Shields for Mechanical Joints
F1139-88(2004) Standard Specification for Steam Traps and Drains
F1140-07 Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
F1141-93(2009) Standard Specification for Wallcovering
F1142-98(2007) Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight
F1143-98(2007) Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight
F1144-98(2007) Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged
F1145-05 Standard Specification for Turnbuckles, Swaged, Welded, Forged
F1147-05 Standard Test Method for Tension Testing of Calcium Phosphate and Metal Coatings
F1148-09 Standard Consumer Safety Performance Specification for Home Playground Equipment
F1149-93(2008) Standard Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services
F1150-06 Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
F1151-88(2008) Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
F1154-99a(2004) Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles
F1155-98(2004) Standard Practice for Selection and Application of Piping System Materials
F1157-04 Standard Practice for Classifying the Relative Performance of the Physical Properties of Security Seals
F1158-94(2008) Standard Guide for Inspection and Evaluation of Tampering of Security Seals
F1159-03a Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures
F1159-FRCA-03a Pratique standard pour la conception et la fabrication de jeux et manèges destinés aux usagers de murs d’escalade artificiels, de glissoires sèches, de jeux et manèges à immersion intentionnelle dans l’eau et à perception automatique et de structures gonflables
F1159-SP-03a Práctica estándar para El Diseño y Manufactura de Juegos Mecánicos Maniobrados por el Cliente, Muros Artificiales para Escalar, Resbaladillas Secas, Juegos Operados con Monedas y Juegos Mecánicos y Dispositivos de Inmersión Determinada en Agua y Estructuras Sostenidas por el Aire
F1160-05 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
F1162-02 Standard Specification for Pole Vault Landing Systems
F1163-04a Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding
F1164-97(2009)e1 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
F1165-98(2004) Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
F1166-07 Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
F1169-07 Standard Specification for Full-Size Baby Crib
F1172-88(2004) Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
F1173-01(2006) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
F1174-01(2006) Standard Practice for Using a Personal Computer Printer as a Test Instrument
F1175-88(2006) Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
F1176-01e1 Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi
F1177-02(2009) Standard Terminology Relating to Emergency Medical Services
F1178-01(2007) Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
F1179-88(2007) Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
F1181-09 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
F1182-07 Standard Specification for Anodes, Sacrificial Zinc Alloy
F1183-96(2006) Standard Specification for Aluminum Alloy Chain Link Fence Fabric
F1184-05 Standard Specification for Industrial and Commercial Horizontal Slide Gates
F1185-03(2009) Standard Specification for Composition of Hydroxylapatite for Surgical Implants
F1186-03(2008)e1 Standard Classification System for Chemicals According to Functional Groups
F1190-99(2005) Standard Guide for Neutron Irradiation of Unbiased Electronic Components
F1192-00(2006) Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices
F1193-06 Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
F1193-FRCA-06 Norme de pratique pour la qualité, la fabrication et la construction des jeux et manèges
F1193-SP-06 Práctica estándar para Calidad, Manufactura y Construcción de Juegos Mecánicos y Dispositivos
F1194-99(2005) Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
F1196-00(2008) Standard Specification for Sliding Watertight Door Assemblies
F1197-00(2007) Standard Specification for Sliding Watertight Door Control Systems
F1198-92(2007) Standard Guide for Shipboard Fire Detection Systems
F1199-88(2004) Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
F1200-88(2004) Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
F1201-88(2004) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
F1202-06 Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
F1203-06 Standard Specification for Washing Machines-Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
F1206-94(2005) Standard Test Method for Evaluating Color Image Output from Color Printers and Copiers
F1207M-96(2007) Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]
F1208-89(2005) Standard Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems
F1209-08 Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs
F1210-08 Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies
F1216-09 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
F1217-03 Standard Specification for Cooker, Steam
F1218-89(2007) Standard Specification for Bronchoscopes (Rigid)
F1220-95(2006) Standard Guide for Emergency Medical Services System (EMSS) Telecommunications
F1221-89(2006) Standard Guide for Interagency Information Exchange
F1223-08 Standard Test Method for Determination of Total Knee Replacement Constraint
F1224-89(2004)e1 Standard Guide for Providing System Evaluation for Emergency Medical Services
F1225-99(2008) Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
F1229-01(2006) Standard Guide for the Qualification and Training of EMS Air-Medical Patient Care Providers
F1231-08 Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks
F1232-98(2008) Standard Practice for Generating a Test Pattern for Single-Pass Film Ribbons
F1233-08 Standard Test Method for Security Glazing Materials And Systems
F1235-03(2008) Standard Consumer Safety Specification for Portable Hook-On Chairs
F1236-96(2007) Standard Guide for Visual Inspection of Electrical Protective Rubber Products
F1237-09 Standard Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing
F1238-95(2003) Standard Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications
F1240-01(2009) Standard Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results
F1244-08 Standard Specification for Berths, Marine
F1245-89(2006) Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
F1246-91(2005) Standard Specification for Electrically Powered Home Care Ventilators, Part 1-Positive-Pressure Ventilators and Ventilator Circuits
F1247-89(2005) Standard Specification for Intrusion Resistant Generic Vault Structures
F1249-06 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
F1250-00(2006) Standard Safety Specification for Stationary Exercise Bicycles
F1251-89(2003) Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices
F1252-08 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
F1255-90(2008) Standard Practice for Performance of Prehospital Automated Defibrillation
F1256-90(2008) Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Basic Life Support/Emergency Medical Technician (BLS/EMT) Training Programs
F1257-90(2008) Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Life Support/Emergency Medical Technician (ALS/EMT) Training Programs
F1258-95(2006) Standard Practice for Emergency Medical Dispatch
F1259M-96(2003) Standard Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration [Metric]
F1260M-96(2003) Standard Test Method for Estimating Electromigration Median Time-to-Failure and Sigma of Integrated Circuit Metallizations [Metric]
F1262M-95(2008) Standard Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric)
F1263-99(2005) Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts
F1264-03(2007)e2 Standard Specification and Test Methods for Intramedullary Fixation Devices
F1265-03a(2008) Standard Test Method for Resistance to Impact for Resilient Floor Tile
F1266-89(2008) Standard Performance Specification for Cerebral Stereotactic Instruments
F1267-07 Standard Specification for Metal, Expanded, Steel
F1268-90(2008) Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems
F1269-06 Test Methods for Destructive Shear Testing of Ball Bonds
F1270-97(2007) Standard Practice for Preparing and Locating Emergency Muster Lists
F1271-90(2006) Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
F1273-91(2007) Standard Specification for Tank Vent Flame Arresters
F1275-03(2008) Standard Test Method for Performance of Griddles
F1276-99(2003) Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
F1277-02 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
F1278-96(2008) Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
F1279-08 Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
F1280-08 Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces
F1281-07 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
F1282-06 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
F1284-09 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
F1285-90(2008) Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Examination Techniques
F1286-90(2009) Standard Guide for Development and Operation of Level 1 Pediatric Trauma Facilities
F1287-90(2007) Standard Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care
F1288-90(2009) Standard Guide for Planning for and Response to a Multiple Casualty Incident
F1290-98a(2004) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
F1291-05 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
F1292-04 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment
F1294-97a(2003) Standard Terminology Relating to Automatic Identification Hard Copy Printing Systems
F1295-05 Standard Specification for Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700)
F1296-08 Standard Guide for Evaluating Chemical Protective Clothing
F1297-90(2005) Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment
F1298-90(2006) Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
F1301-90(2006) Standard Practice for Labeling Chemical Protective Clothing
F1303-04 Standard Specification for Sheet Vinyl Floor Covering with Backing
F1304-08 Standard Test Method for Deflection of Resilient Floor Tile
F1305-94(2002) Standard Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses
F1305-FRCA-94(2002) Guide standard concernant le classement des blessures et des maladies liées aux jeux et manèges
F1305-SP-94(2002) Guía Estándar para Clasificación de Lesiones y Enfermedades Relacionadas con Juegos Mecánicos y Dispositivos
F1306-90(2008) Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
F1307-02(2007) Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
F1308-98(2008) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
F1309-98(2007) Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
F1311-90(2006) Standard Specification for Large-Diameter Fabricated Carbon Steel Flanges
F1312-90(2007) Standard Specification for Brick, Insulating, High Temperature, Fire Clay
F1313-90(2005) Standard Specification for Volatile N-Nitrosamine Levels in Rubber Nipples on Pacifiers
F1314-07 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium - 13 Nickel - 5 Manganese - 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
F1315-00(2006) Standard Test Method for Density of a Sheet Gasket Material
F1316-90(2008) Standard Test Method for Measuring the Transmissivity of Transparent Parts
F1317-98(2007) Standard Test Method for Calibration of Microwave Ovens
F1318-90(2009) Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
F1319-94(2005) Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)
F1320-01(2006) Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
F1321-92(2008) Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
F1322-90(2004) Standard Guide for Selection of Shipboard Incinerators
F1323-08 Standard Specification for Shipboard Incinerators
F1325-91(2008)e1 Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
F1326-02(2006) Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
F1330-91(2006) Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe
F1331-91(2007) Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces
F1332-99(2005) Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10)
F1333-91(2007) Standard Specification for Construction of Fire and Foam Station Cabinets
F1334-08 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
F1335-04 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service
F1336-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
F1337-91(2006) Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities
F1338-91(2007) Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly
F1339-92(2008) Standard Guide for Organization and Operation of Emergency Medical Services Systems
F1342-05 Standard Test Method for Protective Clothing Material Resistance to Puncture
F1343-02 Standard Specification for Anesthetic Gas Scavenging Systems-Transfer and Receiving Systems
F1344-04(2009)e1 Standard Specification for Rubber Floor Tile
F1345-96(2008) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
F1346-91(2003) Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
F1347-91(2006) Standard Specification for Manually Operated Fueling Hose Reels
F1348/F1348M-91(2007) Standard Specification for Pneumatic Rotary Descaling Machines
F1349-08 Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
F1350-08 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
F1351-96(2008) Standard Practice for Determination of the Effect of Hard Creasing Paper on Images Produced by Business Imaging Systems
F1352-08 Standard Guide for Fixed Blade Broadhead Performance and Safety Standards
F1355-06 Standard Guide for Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment
F1356-08 Standard Practice for Irradiation of Fresh and Frozen Red Meat and Poultry to Control Pathogens and Other Microorganisms
F1357-09 Standard Specification for Articulating Total Wrist Implants
F1358-08 Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
F1359-07 Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin
F1360-06 Standard Specification for Ovens, Microwave, Electric
F1361-07 Standard Test Method for Performance of Open Deep Fat Fryers
F1362-09 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
F1363-07 Standard Guide for Reduction of Risk of Injury for Archery Overdraws
F1364-03e1 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
F1365-91(2009) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
F1367-98(2003) Standard Specification for Chromium Sputtering Targets for Thin Film Applications
F1370-92(2005) Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
F1371-04(2009) Standard Specification for Vegetable Peeling Machines, Electric
F1372-93(2005) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
F1373-93(2005) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
F1374-92(2005) Standard Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components
F1375-92(2005) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
F1376-92(2005) Standard Guide for Metallurgical Analysis for Gas Distribution System Components
F1377-08 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
F1378-05 Standard Specification for Shoulder Prosthesis
F1379-95(2008) Standard Terminology Relating to Barbed Tape
F1383-07 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact
F1385-07 Standard Practice for Platforms in Cargo Tanks
F1386-92(2004) Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding
F1387-99(2005) Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
F1394-92(2005) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
F1396-93(2005) Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
F1397-93(2005) Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components
F1398-93(2005) Standard Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components
F1404-92(2007) Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique
F1405-08 Standard Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products—Atlantek Method
F1407-99a(2006) Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method
F1408-97(2008) Standard Practice for Subcutaneous Screening Test for Implant Materials
F1409-00(2005)e1 Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets
F1410-98(2006) Standard Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners
F1411-01(2006) Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
F1412-09 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
F1413-07 Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems
F1414-04 Standard Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing
F1416-96(2008) Standard Guide for Selection of Time-Temperature Indicators
F1417-92(2005) Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
F1422-08 Standard Guide for Using the Incident Command System Framework in Managing Search and Rescue Operations
F1423-09 Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers
F1424-92(2006) Standard Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono- or Dual-Component Toners
F1425-06 Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials
F1426-94(2003) Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
F1427-07 Standard Consumer Safety Specification for Bunk Beds
F1428-92(2005) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
F1429-99(2009) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
F1430-03e1 Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments
F1431-92(2004) Standard Specification for Water Trap for Diesel Exhaust
F1433-97(2004) Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
F1434-97(2008) Standard Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer
F1435-08 Standard Specification for Designation of the Balance Point Location for Archery Arrows
F1436-07 Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings
F1437-06 Standard Practice for Inclined Cargo Tank Ladders
F1438-93(2005) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
F1439-03(2008) Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials
F1440-92(2008) Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion
F1441-03(2009) Standard Specification for Soft-Tissue Expander Devices
F1442-92(2003) Standard Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance
F1443-93(2009) Standard Practice for Using 0.008-in. (0.203-mm) Aperture Reflectometers as Test Instruments for Measuring Visual Image Quality of Business Copy Images
F1444-00(2009) Standard Test Method for Determining Dynamic Thermal Response of Direct Thermal Paper-Label Printer Method
F1445-00(2009) Standard Test Method for Determining Static Thermal Sensitivity of Direct Thermal Paper
F1446-08 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
F1447-06 Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating
F1448-93a(2006) Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents
F1449-08 Standard Guide for Industrial Laundering of Flame, Thermal, and Arc Resistant Clothing
F1450-05 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities
F1453-92(2008) Standard Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care
F1454-99(2008) Standard Practice for Comparing Correctable Film Ribbons
F1455-92(2007) Standard Guide for Selection of Structural Details for Ship Construction
F1457-94b(2006) Standard Terminology Relating to Laser Printers
F1458-04(2008) Standard Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices
F1459-06 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
F1460-07 Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems
F1461-07 Standard Practice for Chemical Protective Clothing Program
F1464-93(2005) Standard Specification for Oxygen Concentrators for Domiciliary Use
F1465-03 Standard Guide for Selection of Security Control Systems
F1466-99(2005) Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
F1467-99(2005) Standard Guide for Use of an X-Ray Tester ([approximate]10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
F1468-04a Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
F1469-99(2004) Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
F1470-09 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
F1471-09 Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System
F1472-08e1 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
F1473-07 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
F1476-07 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
F1478-06 Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)
F1481-94(2001) Standard Guide for Ecological Considerations for the Use of Bioremediation in Oil Spill Response-Sand and Gravel Beaches
F1482-04(2009)e1 Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring
F1483-05 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
F1484-05 Standard Test Methods for Performance of Steam Cookers
F1486-96(2008) Standard Practice for Determination of Abrasion and Smudge Resistance of Images Produced from Office Products (GA-CAT Method)
F1487-07ae1 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
F1488-09 Standard Specification for Coextruded Composite Pipe
F1490-04a Standard Terminology Relating to Search and Rescue
F1492-08 Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating
F1493-93(2008) Standard Guide for Financing and Financial Accountability of Medical Transportation Systems
F1494-03 Standard Terminology Relating to Protective Clothing
F1495-05 Standard Specification for Combination Oven Electric or Gas Fired
F1496-99(2005)e1 Standard Test Method for Performance of Convection Ovens
F1498-08 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
F1499-01(2008) Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
F1500-98(2008) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
F1502-05e1 Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles
F1503-02(2007) Standard Practice for Machine/Process Capability Study Procedure
F1504-02 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
F1505-07 Standard Specification for Insulated and Insulating Hand Tools
F1506-08 Standard Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
F1507-99(2006) Standard Specification for Surge Suppressors for Shipboard Use
F1508-96(2004) Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
F1509-94(2004) Standard Test Methods for Determining Acceptability of Ribbon Welds in Fabric Cartridges
F1510-07 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
F1511-09 Standard Specification for Mechanical Seals for Shipboard Pump Applications
F1512-94(2003) Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies
F1513-99(2003) Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
F1514-03(2008) Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
F1515-03(2008) Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
F1516-08 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
F1517-94(2007) Standard Guide for Scope of Performance of Emergency Medical Services Ambulance Operations
F1519-98(2008) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
F1520-94(2008) Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges
F1521-03(2008) Standard Test Methods for Performance of Range Tops
F1523-94(2007) Standard Guide for Selection of Booms in Accordance With Water Body Classifications
F1524-95(2007) Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills
F1525/F1525M-09 Standard Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills
F1533-01 Standard Specification for Deformed Polyethylene (PE) Liner
F1534-05 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
F1536-95(2005) Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
F1537-08 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
F1538-03(2009) Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
F1541-02(2007)e1 Standard Specification and Test Methods for External Skeletal Fixation Devices
F1543-96(2007) Standard Specification for Shock Attenuation Properties of Fencing Surfaces
F1544-04 Standard Specification for Determining the Rating Velocities of an Archery Bow
F1545-97(2009) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
F1546/F1546M-96(2006) Standard Specification for Fire Hose Nozzles
F1547-09 Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding
F1548-01(2006) Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
F1549-94(2005) Standard Terminology Relating to Underwater Search, Rescue, and Recovery Activities
F1550-05 Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
F1551-09 Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
F1552-94(2009) Standard Practice for Training Instructor Qualification and Certification Eligibility of Emergency Medical Dispatchers
F1553-06 Standard Guide for Specifying Chain Link Fence
F1554-07a Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
F1555-94(2007) Standard Guide for Characteristics for Extremity Splints
F1556-94(2007) Standard Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics
F1557-94(2007) Standard Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics
F1558-94(2007) Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)
F1559-94(2007) Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)
F1560-00(2006) Standard Practice for Emergency Medical Dispatch Management
F1561-03(2008) Standard Performance Requirements for Plastic Chairs for Outdoor Use
F1562-95(2005) Standard Guide for Use-Oriented Foreign Language Instruction
F1563-01(2007) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
F1564-95(2006) Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers
F1565-00(2006) Standard Specification for Pressure-Reducing Valves for Steam Service
F1566-08 Standard Test Methods for Evaluation of Innersprings, Boxsprings, Mattresses or Mattress Sets
F1567-94(2006) Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
F1568-08 Standard Specification for Food Processors, Electric
F1571-95(2008) Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Sutherland Method)
F1572-08 Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces
F1574-03a Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
F1575-03(2008) Standard Test Method for Determining Bending Yield Moment of Nails
F1577-05 Standard Test Methods for Detention Locks for Swinging Doors
F1578-07 Standard Test Method for Contact Closure Cycling of a Membrane Switch
F1579-02e1 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
F1580-07 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
F1581-08e1 Standard Specification for Composition of Anorganic Bone for Surgical Implants
F1582-98(2003) Standard Terminology Relating to Spinal Implants
F1583-95(2006) Standard Practice for Communications Procedures-Phonetics
F1584-95(2003) Standard Practice for Marking Buildings During Disaster Search Operations
F1586-08 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
F1587-99(2005) Standard Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders
F1588-96(2007) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
F1591-95(2006) Standard Practice for Visual Signals Between Persons on the Ground and in Aircraft During Ground Emergencies
F1592-05 Standard Test Methods for Detention Hollow Metal Vision Systems
F1593-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
F1594-95(2003) Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
F1595-00(2005) Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches
F1596-07 Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity
F1598-95(2007) Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)
F1599-95(2009) Standard Guide for Collecting Performance Data on Temporary Storage Devices
F1600-95a(2007) Standard Terminology Relating to Bioremediation
F1601-01(2006) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
F1602-07 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
F1603-07 Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
F1604-02 Standard Specification for Freezers, Ice Cream, Soft Serve, Shake
F1605-95(2007) Standard Test Method for Performance of Double-Sided Griddles
F1606-05 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
F1607-95(2008) Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps
F1608-00(2004) Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
F1609-08 Standard Specification for Calcium Phosphate Coatings for Implantable Materials
F1611-00(2009) Standard Specification for Intramedullary Reamers
F1612-95(2005) Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components with Torsion
F1613-95(2008)e1 Standard Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)
F1614-99(2006) Standard Test Method for Shock Attenuating Properties of Materials Systems for Athletic Footwear
F1615-95(2004) Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
F1616-95(2009) Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings
F1623-96(2008) Standard Terminology Relating to Thermal Imaging Products
F1624-06 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
F1625-00(2008) Standard Specification and Test Method for Rear-Mounted Bicycle Child Carriers
F1629-95(2007) Standard Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both
F1632-03 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
F1633-97(2008) Standard Guide for Techniques in Land Search
F1634-95(2008) Standard Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices
F1635-04a Standard Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
F1637-09 Standard Practice for Safe Walking Surfaces
F1638-95(2008)e1 Standard Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type)
F1639-05 Standard Test Method for Performance of Combination Ovens
F1640-09 Standard Guide for Packaging Materials for Foods to Be Irradiated
F1642-04 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
F1643-05 Standard Test Methods for Detention Sliding Door Locking Device Assembly
F1644-01 Standard Guide for Health and Safety Training of Oil Spill Responders
F1645/F1645M-07 Standard Test Method for Water Migration in Honeycomb Core Materials
F1646-05e1 Standard Terminology Relating to Safety and Traction for Footwear
F1647-02a Standard Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes
F1648-95(2008) Standard Test Methods for Archery Bowstring Component-Serving String Material
F1649-96(2003) Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems
F1650-98(2005) Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions
F1651-95(2009) Standard Guide for Training the Emergency Medical Technician (Paramedic)
F1652-95(2007) Standard Guide for Providing Essential Data Needed in Advance for Prehospital Emergency Medical Services
F1653-95(2007) Standard Guide for Scope of Performance of Triage in a Prehospital Environment
F1654-95(2007) Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment
F1655-95(2007) Standard Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings
F1656-01 Standard Guide for Health and Safety Training of Oil Spill Responders in the United States
F1657-96(2007) Standard Practice for Emergency Joining of Booms with Incompatible Connectors
F1661-09 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
F1662-04 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
F1663-09 Standard Test Method for Determining the Capacitance of a Membrane Switch
F1664-08 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
F1665-08 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
F1667-05 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
F1668-08 Standard Guide for Construction Procedures for Buried Plastic Pipe
F1669M-96(2007) Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]
F1670-08 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
F1671-07 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
F1672-95(2005) Standard Specification for Resurfacing Patellar Prosthesis
F1673-04(2009) Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
F1674-05 Standard Test Method for Joint Restraint Products for Use with PVC Pipe
F1675-09 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
F1676-96(2003) Standard Specification for Basic Tumbling Mats
F1680-07a Standard Test Method for Determining Circuit Resistance of a Membrane Switch
F1681-07a Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit
F1683-09 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component
F1684-06 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
F1685-00(2006) Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems
F1686-09 Standard Guide for Surveys to Document and Assess Oiling Conditions on Shorelines
F1687-09 Standard Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines
F1689-05 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
F1690-96(2004) Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems
F1692-01(2006) Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
F1693-96(2003) Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
F1694-09 Standard Guide for Composing Walkway Surface Investigation, Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls
F1695-03(2008) Standard Test Method for Performance of Underfired Broilers
F1696-07 Standard Test Method for Energy Performance of Single-Rack, Door-Type Commercial Dishwashing Machines
F1697-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
F1698-02(2008) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
F1699-96(2008) Standard Classification for Passive Fiber Optic Seals
F1700-04 Standard Specification for Solid Vinyl Floor Tile
F1701-05 Standard Specification for Unused Polypropylene Rope with Special Electrical Properties
F1702-96(2002)e1 Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus
F1703-04 Standard Guide for Ice Hockey Playing Facilities
F1704-05 Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems
F1705-96(2007) Standard Guide for Training Emergency Medical Services Ambulance Operations
F1709-97(2008) Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications
F1710-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
F1711-96(2008) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method
F1712-06 Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications
F1713-08 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)
F1714-96(2008) Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices
F1716-96(2008) Standard Guide for Transition and Performance of Marine Software Systems Maintenance
F1717-09 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
F1718-01(2006) Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
F1719-96(2008) Standard Specification for Image-Interactive Stereotactic and Localization Systems
F1720-06 Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
F1721-04 Standard Practices for Determining Stability of Direct Thermal Imaging Products
F1722-09 Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
F1728-96(2007) Standard Practice for Multiple Persons Cold Water Survival/Rescue Technique: Huddle Position
F1729-96(2007) Standard Practice for Single Person Cold Water Survival/Rescue Technique: HELP Position
F1730-96(2002) Standard Guide for Throwing a Water Rescue Throwbag
F1731-96(2008) Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
F1732-96(2005) Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
F1733-07 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
F1734-03(2009) Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
F1735-02(2008) Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
F1736-09 Standard Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms
F1737-07 Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems
F1738-96(2007) Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
F1739-96(2007) Standard Guide for Performance of a Water Rescuer-Level I
F1740-96(2007) Standard Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope
F1741-08 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
F1742-03e1 Standard Specification for PVC Insulating Sheeting
F1743-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
F1744-96(2008)e1 Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
F1749-09 Standard Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels
F1750-05 Specification for Paintball Marker Threaded-Propellant Source Interface
F1752-96(2006) Standard Test Method for Archery Bow Component-Cord Material
F1753-96(2006) Standard Specification for Classification and Marking of Single-Lens Scopes for Use with Archery Bows
F1754-08 Standard Guide for Marine Vessel Structural Inspection Considerations
F1755M-96(2007) Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]
F1756-97a(2008) Standard Guide for Implementation of a Fleet Management System Network
F1757-96(2008) Standard Guide for Digital Communication Protocols for Computerized Systems
F1758-05 Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
F1759-97(2004) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
F1760-01(2005)e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
F1761-00(2005) Standard Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets
F1762-07 Standard Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure
F1764-97(2007) Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
F1765-97a(2007) Standard Guide for Ice Staff Self-Rescue Technique
F1766-97a(2007) Standard Guide for Ice Awls Self-Rescue Technique
F1767-98(2005) Standard Guide for Forms Used for Search and Rescue
F1768-97(2007) Standard Guide for Using Whistle Signals During Rope Rescue Operations
F1772-99(2005) Standard Specification for Climbing Harnesses
F1773-97(2004) Standard Terminology Relating to Climbing and Mountaineering Equipment and Practices
F1774-99(2005) Standard Specification for Climbing and Mountaineering Carabiners
F1775-97(2004) Standard Specification for Labeling of Climbing and Mountaineering Equipment
F1776-09 Standard Specification for Eye Protective Devices for Paintball Sports
F1777-02 Standard Practice for Paintball Field Operation
F1778-97(2008) Standard Guide for Selection of Skimmers for Oil-Spill Response
F1779-08 Standard Practice for Reporting Visual Observations of Oil on Water
F1780-97(2002) Standard Guide for Estimating Oil Spill Recovery System Effectiveness
F1781-03(2009) Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants
F1782-97(2008) Standard Practice for Amount of Ink Deposit on Fabric Type Ribbons
F1783-97(2007) Standard Guide for Performance of an Ice Rescuer-Level II
F1784-97(2008) Standard Test Method for Performance of a Pasta Cooker
F1785-97(2008) Standard Test Method for Performance of Steam Kettles
F1786-97(2004)e1 Standard Test Method for Performance of Braising Pans
F1787-98(2008) Standard Test Method for Performance of Rotisserie Ovens
F1788-08 Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
F1789-09 Standard Terminology for F16 Mechanical Fasteners
F1790-05 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing
F1791-00(2006) Standard Specification for Filters Used in Air or Nitrogen Systems
F1792-97(2004) Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
F1793-97(2004) Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service
F1794-97(2004) Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
F1795-00(2006) Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
F1796-09 Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC
F1797-98(2003) Standard Test Method for Acoustic Emission Testing of Insulated Digger Derricks
F1798-97(2008) Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
F1799-97(2004) Standard Guide for Shipboard Generated Waste Management Audits
F1800-07 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
F1801-97(2004) Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
F1802-04 Standard Test Method for Performance Testing of Excess Flow Valves
F1803-06 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
F1804-08 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
F1805-06 Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
F1806-97(2008) Standard Practice for Tire Testing Operations-Basic Concepts and Terminology for Reference Tire Use
F1807-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
F1808-03(2008) Standard Guide for Weight Control Technical Requirements for Surface Ships
F1812-09 Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding
F1813-06 Standard Specification for Wrought Titanium-12 Molybdenum-6 Zirconium-2 Iron Alloy for Surgical Implant (UNS R58120)
F1814-97a(2009) Standard Guide for Evaluating Modular Hip and Knee Joint Components
F1815-06 Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Putting Green and Sports Turf Root Zones
F1816-97(2004) Standard Safety Specification for Drawstrings on Children's Upper Outerwear
F1817-97(2003) Standard Test Method for Performance of Conveyor Ovens
F1818-04 Standard Specification for Foot Protection for Chain Saw Users
F1819-07 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
F1820-97(2009) Standard Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device
F1821-09 Standard Consumer Safety Specification for Toddler Beds
F1823-97(2007) Standard Guide for Water Rescue Personal Flotation Device (PFD)
F1824-97(2007) Standard Guide for Performance of a Water Rescuer-Level II
F1825-03(2007) Standard Specification for Clampstick Type Live Line Tools
F1826-00(2006) Standard Specification for Live Line and Measuring Telescoping Tools
F1827-97(2006) Standard Terminology Relating to Food Service Equipment
F1828-97(2006) Standard Specification for Ureteral Stents
F1829-98(2009) Standard Test Method for Static Evaluation of the Glenoid Locking Mechanism in Shear
F1830-97(2005) Standard Practice for Selection of Blood for In Vitro Evaluation of Blood Pumps
F1831-97(2006) Standard Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices
F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
F1833-97(2006) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
F1834-98(2004) Standard Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant Mitigation Method on Land
F1835-97(2007) Standard Guide for Cable Splicing Installations
F1836M-09 Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
F1837M-97(2007) Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
F1838-98(2008) Standard Performance Requirements for Child's Plastic Chairs for Outdoor Use
F1839-08e1 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
F1840-98a(2004) Standard Terminology for Surgical Suture Needles
F1841-97(2005) Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps
F1842-09 Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications
F1843-09 Standard Practice for Sample Preparation of Transparent Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements
F1844-97(2008) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
F1845-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
F1846-98(2008) Standard Practice for Symbols and Markings for Use With Land Search Maps
F1847-98(2005) Standard Guide for Demonstrating Minimum Skills of Search and Rescue Dogs and Handlers
F1848-98(2005) Standard Classification for Search and Rescue Dog Crew/Teams
F1849-07 Standard Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)
F1850-00(2005) Standard Specification for Particular Requirements for Anesthesia Workstations and Their Components
F1851-98(2003) Standard Practice for Bar Code Verification
F1852-08 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
F1853-03 Standard Test Method for Measuring Sleeping Bag Packing Volume
F1854-09 Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants
F1855-00(2005) Standard Specification for Polyoxymethylene (Acetal) for Medical Applications
F1856-04e1 Standard Practice for Determining Toner Usage for Printer Cartridges
F1857-01(2006) Standard Terminology Relating to Ink Jet Printers and Images Made Therefrom
F1858-98(2008) Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
F1859-04(2009)e1 Standard Specification for Rubber Sheet Floor Covering Without Backing
F1860-04(2009)e1 Standard Specification for Rubber Sheet Floor Covering With Backing
F1861-08 Standard Specification for Resilient Wall Base
F1862-07 Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
F1863-98(2004) Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts
F1864-05 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
F1865-02a(2009) Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
F1866-07 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
F1867-06 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
F1868-09 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
F1869-04 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
F1870-05 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
F1871-02e1 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
F1872-05 Standard Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations
F1874-98(2004) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
F1875-98(2004) Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface
F1876-98(2003)e1 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
F1877-05 Standard Practice for Characterization of Particles
F1878-98(2004) Standard Guide for Escort Vessel Evaluation and Selection
F1879-98(2005) Standard Guide for Demonstrating Obedience and Agility in Search and Rescue Dogs
F1880-98(2004) Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
F1881-09 Standard Test Method for Measuring Baseball Bat Performance Factor
F1882-06 Standard Specification for Residential Basketball Systems
F1883-03(2008) Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units
F1884-04 Standard Test Method for Determining Residual Solvents in Packaging Materials
F1885-04 Standard Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms
F1886/F1886M-09 Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection
F1887-09 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
F1888-09 Test Method for Compression-Displacement of Baseballs and Softballs
F1889-05 Standard Guide for Straightness Measurement of Arrow Shafts
F1890-09 Standard Test Method for Measuring Softball Bat Performance Factor
F1891-06 Standard Specification for Arc and Flame Resistant Rainwear
F1892-06 Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
F1893-98(2003) Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices
F1894-98(2003) Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness
F1895-98(2004) Practice for Submersion of a Membrane Switch
F1896-98(2004) Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
F1897-08 Standard Specification for Leg Protection for Chain Saw Users
F1898-08 Standard Specification for Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers
F1899-98(2008)e1 Standard Specification for Food Waste Pulper Without Waterpress Assembly
F1900-98(2004) Standard Test Method for Water Resistance of Footwear Using a Walking Step Simulator
F1901-98(2004) Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
F1903-98(2003) Standard Practice for Testing for Biological Responses to Particles In Vitro
F1904-98(2008) Standard Practice for Testing the Biological Responses to Particles
F1905-98(2003) Standard Practice for Selecting Tests for Determining the Propensity of Materials to Cause Immunotoxicity
F1906-98(2003) Standard Practice for Evaluation of Immune Responses In Biocompatibility Testing Using ELISA Tests, Lymphocyte, Proliferation, and Cell Migration
F1908-08 Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
F1909-98(2004) Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets
F1910-98(2008) Standard Specification for Long Barbed Tape Obstacles
F1911-05 Standard Practice for Installation of Barbed Tape
F1912-98(2009) Standard Specification for Safety of Bean Bag Chairs
F1913-04 Standard Specification for Vinyl Sheet Floor Covering Without Backing
F1914-07 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
F1915-05 Standard Test Methods for Glazing for Detention Facilities
F1917-08 Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories
F1918-04 Standard Safety Performance Specification for Soft Contained Play Equipment
F1919-03 Standard Specification for Griddles, Single and Double Sided, Self-heating, Counter or Stand Mounted Gas and Electric Fired
F1920-07 Standard Test Method for Performance of Rack Conveyor, Commercial Dishwashing Machines
F1921-98(2004) Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
F1922-98(2005) Standard Test Method for Tires, Pneumatic, Vehicular, Highway
F1923-98(2005) Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway
F1924-05 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F1925-09 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
F1926/F1926M-08 Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings
F1927-07 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
F1928-98(2004)e1 Standard Safety Guide for Consumer Recreational Use of Fun-Karts
F1929-98(2004) Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
F1930-00(2008) Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin
F1931-98(2004) Standard Test Method for Characterization of Gymnastic Landing Mats and Floor Exercise Surfaces
F1932-98(2004) Standard Test Method for Measuring Sleeping Bag Loft
F1933-98(2004) Standard Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
F1934-98(2004) Standard Test Method for Weighing a Backpacking or Mountaineering Tent
F1935-01(2007) Standard Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent
F1936-07e1 Standard Specification for Shock-Absorbing Properties of North American Football Field Playing Systems as Measured in the Field
F1937-04 Standard Specification for Body Protectors Used in Horse Sports and Horseback Riding
F1938-98(2004) Guide for Safer Use of Movable Soccer Goals
F1939-08 Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
F1940-07a Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
F1941-07 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))
F1941M-07 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]
F1942-98(2003) Standard Practice for Creating Test Targets for Determining the Ink Yield of the Imaging Supplies Used in Ink Jet Printers
F1943-98(2008) Standard Test Method for Determining the Dynamic Thermal Response of Thermal Mass Transfer Ribbon Products—Atlantek Method
F1944-98(2008) Standard Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers
F1945-05 Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting
F1946-04 Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight
F1947-04 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
F1948-05 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
F1949-99(2007) Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles
F1950-FRCA-99 Spécifications standard pour L’information physique à être transmise avec les jeux et manèges usagés
F1950-SP-99 Especificación estándar para Información Física que se Transferirá con Juegos Mecánicos y Dispositivos Usados
F1951-09b Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
F1952-09 Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing
F1953-99(2003) Standard Guide for Construction and Maintenance of Grass Tennis Courts
F1955-99(2005) Standard Test Method for Flammability of Sleeping Bags
F1956-99(2005) Standard Specification for Rescue Carabiners
F1957-99(2004) Standard Test Method for Composite Foam Hardness-Durometer Hardness
F1957-FRCA-99(2004) Méthode d’essai standard pour dureté de mousse composite - Test au duromètre
F1957-SP-99(2004) Método de Ensayo Estándar para Dureza de Espuma Compuesta - Dureza por Durómetro
F1958/F1958M-99(2005) Standard Test Method for Determining the Ignitability of Non-flame-Resistance Materials for Clothing by Electric Arc Exposure Method Using Mannequins
F1959/F1959M-06ae1 Standard Test Method for Determining the Arc Rating of Materials for Clothing
F1960-09 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
F1961-02a Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
F1962-05 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
F1963-05 Standard Specification for Deep-Fat Fryers, Gas or Electric, Open
F1964-99(2005) Standard Test Method for Performance of Pressure and Kettle Fryers
F1965-99(2005) Standard Test Method for Performance of Deck Ovens
F1966-03(2008) Standard Specification for Dough Divider and Rounding Machines
F1967-08a Standard Consumer Safety Specification for Infant Bath Seats
F1970-05 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
F1971-05 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
F1972-05 Standard Guide for Terminology Relating to Candles and Associated Accessory Items
F1973-08 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
F1974-08 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
F1975-09 Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers
F1976-06 Standard Test Method for Impact Attenuation Properties of Athletic Shoes Using an Impact Test
F1977-04 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
F1978-00(2007)e2 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
F1979-09 Standard Specification for Paintballs Used in the Sport of Paintball
F1980-07 Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
F1983-99(2008) Standard Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications
F1984-99(2008) Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials
F1985-99(2005) Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves
F1986-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
F1987-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
F1988-99(2008) Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use
F1989-05 Specification for Cooking Fire Suppression Blankets
F1990-07 Standard Guide for In-Situ Burning of Spilled Oil: Ignition Devices
F1991-99(2005) Standard Test Method for Performance of Chinese (Wok) Ranges
F1992-99(2007) Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes
F1993-99(2005) Standard Classification of Human Search and Rescue Resources
F1994-99(2005) Standard Test Method for Shipboard Fixed Foam Firefighting Systems
F1995-00(2005) Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
F1996-06 Standard Test Method for Silver Migration for Membrane Switch Circuitry
F1999-00(2006) Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
F2000-06 Standard Guide for Fences for Ballfields and Other Sports Facilities
F2001-01(2006) Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record
F2003-02(2008) Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
F2004-05 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
F2005-05 Standard Terminology for Nickel-Titanium Shape Memory Alloys
F2006-08 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
F2007-07a Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
F2007-FRCA-07a Norme de pratique pour la conception, la fabrication et l’exploitation de concessions et établissements de go-karts
F2007-SP-07a Práctica estándar paraDiseño, Manufactura y Operación de Concesiones e Instalaciones para Go-Karts
F2008-00(2006) Standard Guide for Qualitative Observations of Skimmer Performance
F2009-00(2005) Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
F2010-00(2005) Standard Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test
F2011-02e1 Standard Specification for Safety and Performance of Fun-Karts
F2012-08 Standard Consumer Safety Performance Specification for Stationary Activity Centers
F2013-05 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
F2014-00(2006) Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
F2015-00(2006) Standard Specification for Lap Joint Flange Pipe End Applications
F2016-00(2006) Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings
F2017-00(2006) Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration
F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
F2019-03(2009) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
F2020-02a(2009) Standard Practice for Design, Construction, and Procurement of Emergency Medical Services Systems (EMSS) Ambulances
F2021-06 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
F2022-01(2007) Standard Test Method for Performance of Booster Heaters
F2023-08 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
F2025-06 Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
F2026-08 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
F2027-08 Standard Guide for Characterization and Testing of Raw or Starting Biomaterials for Tissue-Engineered Medical Products
F2028-08 Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation
F2029-08 Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
F2030-08 Standard Specification for Paintball Cylinder Burst Disk Assemblies
F2031-05 Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
F2032-06 Standard Specification for Helmets Used for BMX Cycling
F2033-05 Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
F2034-08 Standard Specification for Sheet Linoleum Floor Covering
F2035-00(2006) Standard Practice for Measuring the Dark Stability of Ink Jet Prints
F2036-05e1 Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
F2037-00(2006) Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments
F2038-00(2005) Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials
F2039-00(2006) Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program
F2040-06 Standard Specification for Helmets Used for Recreational Snow Sports
F2042-00(2005) Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
F2043-09 Standard Classification for Bicycle Usage
F2044-09 Standard Specification for Liquid Level Indicating Equipment, Electrical
F2045-00(2006) Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
F2046-00(2006) Standard Specification for Tachometers, Various
F2047-00(2006) Standard Practice for Workers' Compensation Coverage of Emergency Services Volunteers
F2048-00(2009) Standard Practice for Reporting Slip Resistance Test Results
F2049-09b Standard Guide for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
F2050-08 Standard Consumer Safety Performance Specification for Hand-Held Infant Carriers
F2051-00(2006) Standard Specification for Implantable Saline Filled Breast Prosthesis
F2052-06e1 Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
F2053-00(2006) Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials
F2054-07 Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
F2055-09 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
F2057-09a Standard Safety Specification for Chests, Door Chests, and Dressers
F2058-07 Standard Specification for Candle Fire Safety Labeling
F2059-06 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask
F2060-00(2005) Standard Guide for Maintaining Cool Season Turfgrasses on Athletic Fields
F2061-08 Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions
F2062-00(2006) Standard Specification for Square Drive Interconnections on Surgical Instruments
F2063-05 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
F2064-00(2006)e1 Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Products Application
F2065-00(2006) Standard Practice for Testing for Alternative Pathway Complement Activation in Serum by Solid Materials
F2066-08 Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
F2067-07 Standard Practice for Development and Use of Oil-Spill Trajectory Models
F2068-09 Standard Specification for Femoral Prostheses—Metallic Implants
F2070-00(2006) Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
F2071-00(2006) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
F2072-01(2007) Standard Practice for Hosedown of a Membrane Switch
F2073-01(2006) Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch
F2075-04e1 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
F2076-01(2006) Standard Practice for Communicating an EMS Patient Report to Receiving Medical Facilities
F2077-03 Test Methods For Intervertebral Body Fusion Devices
F2078-08a Standard Terminology Relating to Hydrogen Embrittlement Testing
F2079-09 Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
F2080-08 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
F2081-06 Standard Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents
F2082-06 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
F2083-08e1 Standard Specification for Total Knee Prosthesis
F2084-01(2007)e1 Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments
F2085-09 Standard Consumer Safety Specification for Portable Bed Rails
F2087-01(2007) Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick
F2088-08ae1 Standard Consumer Safety Specification for Infant Swings
F2089-01(2007) Standard Guide for Language Interpretation Services
F2090-08 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
F2091-01(2006) Standard Specification for Acetabular Prostheses
F2092-01(2007) Standard Specification for Convection Oven Gas or Electric
F2093-06 Standard Test Method for Performance of Rack Ovens
F2094/F2094M-08 Standard Specification for Silicon Nitride Bearing Balls
F2095-07e1 Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
F2096-04 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
F2097-08 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
F2098-08 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings
F2099-01(2007) Standard Guide for Use of Universal Transverse Mercator (UTM) Grids When Preparing and Using a Field Map for Land Search
F2100-07 Standard Specification for Performance of Materials Used in Medical Face Masks
F2101-07 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus
F2102-06e1 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
F2103-01(2007)e2 Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications
F2105-06 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
F2106-03 Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
F2107-08 Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
F2108-06 Standard Practice for Inspection of Transparent Parts by Prism
F2109-01(2005) Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
F2111-01a(2005)e1 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
F2112-02 Standard Terminology for Membrane Switches
F2113-01(2007) Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications
F2115-05 Standard Specification for Motorized Treadmills
F2116-01(2007) Standard Specification for Low Stretch and Static Kernmantle Life Safety Rope
F2117-01 Standard Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
F2118-03(2009) Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
F2119-07 Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants
F2120-06 Standard Practice for Testing Treestand Load Capacity
F2121-05 Standard Practice for Treestand Labels
F2122-08 Standard Practice for Treestand Safety Devices
F2123-09 Standard Practice for Treestand Instructions
F2124-05 Practice for Testing Treestand Ladder, Tripod Stand and Climbing Stick Load Capacity
F2125-09 Standard Test Method for Treestand Static Stability and Adherence
F2126-06 Standard Test Method for Treestand Static Load Capacity
F2128-09 Standard Test Method for Treestand Repetitive Loading Capability
F2129-08 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
F2130-09 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials
F2131-02(2007)e1 Standard Test Method forIn Vitro Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line
F2132-01(2008)e1 Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps
F2133-01(2007) Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Insulated Marine Bulkheads and Decks, Constructed of Steel
F2135-01(2007) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
F2136-08 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
F2137-09 Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
F2138-09 Standard Specification for Excess Flow Valves for Natural Gas Service
F2140-01(2007) Standard Test Method for Performance of Hot Food Holding Cabinets
F2141-07 Standard Test Method for Performance of Self-Serve Hot Deli Cases
F2142-01(2007) Standard Test Method for Performance of Drawer Warmers
F2143-04 Standard Test Method for Performance of Refrigerated Buffet and Preparation Tables
F2144-09 Standard Test Method for Performance of Large Open Vat Fryers
F2145-09 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
F2146-07 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
F2147-01(2006) Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens
F2148-07e1 Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)
F2149-01(2007) Standard Test Method for Automated Analyses of Cells-the Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions
F2150-07 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
F2152-07 Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
F2153-07 Standard Test Method for Measurement of Backpack Capacity
F2154-01(2007) Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced
F2155-01 Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
F2156-06 Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
F2157-09 Standard Specification for Synthetic Surfaced Running Tracks
F2158-08 Standard Specification for Residential Central-Vacuum Tube and Fittings
F2159-05 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
F2160-08 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
F2161-01 Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils
F2162-01(2008) Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
F2163-01(2008) Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
F2164-02(2007) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
F2165-02(2008) Standard Specification for Flexible Pre-Insulated Piping
F2167-05b Standard Consumer Safety Specification for Infant Bouncer Seats
F2168-02(2008) Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
F2169-02(2008) Standard Specification for Resilient Stair Treads
F2170-09 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
F2171-02(2009) Standard Guide for Defining the Performance of First Aid Providers in Occupational Settings
F2172-02 Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers
F2174-02(2008) Standard Practice for Verifying Acoustic Emission Sensor Response
F2175-07 Standard Specification for Portable and Permanent Emergency Escape Ladders for Residential Use
F2176-02(2009) Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
F2178-08 Standard Test Method for Determining the Arc Rating and Standard Specification for Face Protective Products
F2179-02(2007) Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
F2180-02(2007)e2 Standard Specification for Metallic Implantable Strands and Cables
F2181-09 Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
F2182-02a Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging
F2183-02(2008) Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
F2184-02 Standard Guide for Installation of Paintball Barrier Netting
F2187-02 Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
F2188-02 Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
F2191-02(2008) Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
F2192-05 Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders
F2193-02(2007) Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
F2194-07ae1 Standard Consumer Safety Specification for Bassinets and Cradles
F2195-07 Standard Specification for Linoleum Floor Tile
F2196-02 Standard Specification for Circulating Liquid and Forced Air Patient Temperature Management Devices
F2199-02(2008) Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat
F2200-05 Standard Specification for Automated Vehicular Gate Construction
F2201-02e1 Standard Consumer Safety Specification for Utility Lighters
F2202-02(2007) Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
F2203-02(2007) Standard Test Method for Linear Measurement Using Precision Steel Rule
F2204-09 Standard Guide for Describing Shoreline Response Techniques
F2205-07 Standard Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments
F2206-02 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
F2207-06 Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
F2208-08 Standard Safety Specification for Residential Pool Alarms
F2209-03 Standard Guide for Training of Level I Land Search Team Member
F2210-02 Standard Guide for Processing Cells, Tissues, and Organs for Use in Tissue Engineered Medical Products
F2211-04 Standard Classification for Tissue Engineered Medical Products (TEMPs)
F2212-09 Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
F2213-06 Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
F2214-02(2008) Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
F2215-08 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
F2216-05 Standard Specification for Selectorized Strength Equipment
F2217-02(2007) Standard Practice for Coating/Adhesive Weight Determination
F2218-02(2008) Standard Guide for Hardware Implementation for Computerized Systems
F2219-09 Standard Test Methods for Measuring High-Speed Bat Performance
F2220-02(2009) Standard Specification for Headforms
F2223-09 Standard Guide for ASTM Standards on Playground Surfacing
F2224-09 Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants
F2225-09a Standard Safety Specification for Consumer Trampoline Enclosures
F2226-03 Standard Practice for Determining the Adhesion of Prints and Laminating Films
F2227-02(2007) Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO2 Tracer Gas Method
F2228-02(2007) Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
F2229-07 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
F2230-08 Standard Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
F2231-02(2008) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
F2232-09 Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
F2233-03(2009) Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers
F2234-08 Standard Specification for Spill Resistant Fueling Systems for Portable Fuel Containers for Consumer Use
F2236-09a Standard Consumer Safety Specification for Soft Infant Carriers
F2237-03(2008) Standard Test Method for Performance of Upright Overfired Broilers
F2238-03 Standard Test Method for Performance of Rapid Cook Ovens
F2239-03e1 Standard Test Method for Performance of Conveyor Broilers
F2240-08 Standard Specification for Manufacturer Quality Assurance Program for Powered Parachute Aircraft
F2241-05a(2008) Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft
F2242-05(2008) Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft
F2243-05 Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft
F2244-08 Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft
F2245-09 Standard Specification for Design and Performance of a Light Sport Airplane
F2246-06e1 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
F2247-03 Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
F2248-03 Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
F2249-03(2009) Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
F2250-03(2008) Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
F2251-03(2008) Standard Test Method for Thickness Measurement of Flexible Packaging Material
F2252-03(2008) Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
F2255-05 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
F2256-05 Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
F2257-09 Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
F2258-05 Standard Test Method for Strength Properties of Tissue Adhesives in Tension
F2259-03(2008) Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
F2260-03(2008) Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
F2261-06 Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
F2262-09 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
F2263-07e1 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
F2264-09 Standard Consumer Safety Specification for Non-Powered Scooters
F2266-03(2008)e1 Standard Specification for Masses Used in Testing Rescue Systems and Components
F2267-04 Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression
F2268-03 Standard Specification for Bicycle Serial Numbers
F2269-03 Standard Guide for Maintaining Warm Season Turfgrasses on Athletic Fields
F2270-04 Standard Guide for Construction and Maintenance of Warning Track Areas on Sports Fields
F2271-03 Standard Specification for Paintball Marker Barrel Blocking Devices
F2272-08 Standard Specification for Paintball Markers
F2273-03 Standard Test Methods for Bicycle Forks
F2274-03 Standard Specification for Condition 3 Bicycle Forks
F2275-08 Standard Practice for Treestand Manufacturer Quality Assurance Program
F2276-09 Standard Specification for Fitness Equipment
F2277-03 Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
F2278-03 Standard Test Method for Evaluating Paintball Barrier Netting
F2279-06 Standard Practice for Quality Assurance in the Manufacture of Fixed Wing Light Sport Aircraft
F2280-08 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
F2281-04 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
F2282-03(2009) Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
F2283-04 Standard Specification for Shipboard Oil Pollution Abatement System
F2285-04 Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
F2286-05 Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas
F2291-09a Standard Practice for Design of Amusement Rides and Devices
F2292-03(2008) Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods—Drip, Spray, Submersion and Rub
F2293-03(2008) Standard Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers
F2294-03 Standard Practice for Determining the Writeability of Print Media
F2295-06 Standard Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft
F2296-04 Standard Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress: Four Different Test Methods-Score/Tape, Cross Hatch, X-Cut, and Crease-Folding
F2298-03(2009)e1 Standard Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell
F2299-03 Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
F2300-05 Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing
F2302-08 Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant
F2303-03(2009) Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits
F2304-03 Standard Practice for Rehabilitation of Sewers Using Chemical Grouting
F2306/F2306M-08 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
F2307-03 Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
F2311-08 Standard Guide for Classification of Therapeutic Skin Substitutes
F2312-04 Standard Terminology Relating to Tissue Engineered Medical Products
F2313-08e1 Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide
F2315-03 Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
F2316-08 Standard Specification for Airframe Emergency Parachutes for Light Sport Aircraft
F2317/F2317M-05(2009) Standard Specification for Design of Weight-Shift-Control Aircraft
F2318-04 Standard Specification for Rotary Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
F2319-04 Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
F2320-03 Standard Specification for Rubber Insulating Sheeting
F2321-05 Standard Specification for Flexible Insulated Temporary By-Pass Jumpers
F2322-03 Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
F2324-03(2009) Standard Test Method for Prerinse Spray Valves
F2325-03 Standard Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications
F2326-04(2009) Standard Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn
F2327-08 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
F2328-05 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
F2328M-07 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]
F2329-05 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
F2330-04 Standard Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water
F2331-04e1 Standard Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials
F2332-06 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
F2333-04 Standard Test Method for Traction Characteristics of the Athletic Shoe-Sports Surface Interface
F2334-09 Standard Guide for Above Ground Public Use Skatepark Facilities
F2336-05 Standard Guide for Roller Hockey Playing Facilities
F2337-08 Standard Test Method for Treestand Fall Arrest System
F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
F2339-06(2009) Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft
F2340-05 Standard Specification for Developing and Validating Prediction Equation(s) or Model(s) Used in Connection with Livestock, Meat, and Poultry Evaluation Device(s) or System(s) to Determine Value
F2341-05 Standard Practice for User Requirements for Livestock, Meat, and Poultry Evaluation Devices or Systems
F2342/F2342M-09 Standard Specification for Design and Construction of Composition or Quality Constituent Measuring Devices or Systems
F2343-09 Standard Test Method for Livestock, Meat, and Poultry Evaluation Devices
F2345-03(2008) Standard Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
F2346-05 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
F2347-03 Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
F2348-04 Standard Performance Specification for Privacy Padlocks
F2349-04 Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems
F2350-04 Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems
F2352-05(2008) Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft
F2353-05(2008) Standard Specification for Manufacturer Quality Assurance Program for Lighter-Than-Air Light Sport Aircraft
F2354-05b(2008) Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft
F2355-05a(2008) Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft
F2356-05a(2008) Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
F2357-04 Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader
F2358-04 Standard Guide for Measuring Characteristics of Sapphire Substrates
F2359-04 Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
F2360-08 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
F2361-03(2009) Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
F2362-03(2009) Standard Specification for Temperature Monitoring Equipment
F2363-06 Standard Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex IV Marine Sanitation Devices (Flow Through Treatment)
F2366-05 Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
F2367-04a Standard Specification for Labeling for Upright Brooms for Consumer and Institutional Use
F2368-04 Standard Specification for Labeling for Wet Mops for Consumer and Institutional Use
F2369-04 Standard Safety Specification for Non-Integral Firearm Locking Devices
F2370-05 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
F2371-05 Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin
F2372-04 Standard Consumer Safety Performance Specification for Shopping Carts
F2373-08 Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
F2374-07a Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
F2374-FRCA-07a Norme de pratique pour la conception, la fabrication, le fonctionnement et l’entretien de jeux gonflables
F2374-SP-07a Práctica estándar para Diseño, Manufactura, Operación y Mantenimiento de Dispositivos Inflables para Entretenimiento
F2375-09 Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
F2376-08 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
F2378-05 Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
F2379-04 Standard Test Method for Energy Performance of Powered Open Warewashing Sinks
F2380-04 Standard Test Method for Performance of Conveyor Toasters
F2381-04 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
F2382-04e1 Standard Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)
F2383-05 Standard Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products (TEMPs)
F2384-05 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
F2385-04 Standard Test Method for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
F2386-04 Standard Guide for Preservation of Tissue Engineered Medical Products (TEMPs)
F2387-04 Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs
F2388-09 Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use
F2389-07e1 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
F2390-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
F2391-05 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
F2392-04 Standard Test Method for Burst Strength of Surgical Sealants
F2393-04 Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications
F2394-07 Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System
F2395-07 Standard Terminology for Unmanned Air Vehicle Systems
F2396-04 Standard Guide for Construction of High Performance Sand-Based Rootzones for Sports Fields
F2397-04a Standard Specification for Protective Headgear Used in Martial Arts
F2398-04e1 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
F2400-06 Standard Specification for Helmets Used in Pole Vaulting
F2401-04 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
F2403-09 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
F2405-04 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
F2406-04 Standard Practice for Determining Yield of Solid Ink Sticks
F2407-06 Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities
F2408-09 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
F2411-07 Standard Specification for Design and Performance of an Airborne Sense-and-Avoid System
F2412-05 Standard Test Methods for Foot Protection
F2413-05 Standard Specification for Performance Requirements for Foot Protection
F2414-04(2009) Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
F2415-09 Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft
F2416-06e1 Standard Specification for Protective Headgear Used in Electric Personal Assistive Mobility Devices
F2417-09 Standard Specification for Fire Safety for Candles
F2418-09 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
F2419-05 Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
F2420-05 Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood
F2421-05 Standard Test Method for Measurement of Resilient Floor Plank by Dial Gage
F2423-05 Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
F2425-05a(2009) Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
F2426-05a(2008) Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft
F2427-05a(2008) Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft
F2428-04 Standard Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)
F2429-05 Standard Terminology Relating to Aerospace Transparent Materials and Enclosures
F2430-04 Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
F2431-04 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
F2432-04 Standard Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment
F2433-05 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
F2434-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
F2435-07 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
F2436-05 Standard Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using a Drop Test
F2437-06 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
F2438-04 Standard Specification for Oil Spill Response Boom Connection: Slide Connector
F2439-06 Standard Specification for Headgear Used in Soccer
F2440-04 Standard Specification for Indoor Wall/Feature Padding
F2441-05 Standard Practice for Labeling of Backpacking and Mountaineering Tents and Bivouac Sacks
F2442-07 Standard Guide for Layout of Ice Arena
F2443-04 Standard Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End
F2444-04 Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
F2446-04 Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
F2447-05(2009) Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft
F2448-04(2009) Standard Practice for Manufacturer Quality Assurance System for Weight-Shift-Control Aircraft
F2449-09 Standard Specification for Manufacturer Quality Assurance Program for Light Sport Gyroplane Aircraft
F2450-09 Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products
F2451-05 Standard Guide forin vivo Assessment of Implantable Devices Intended to Repair or Regenerate Articular Cartilage
F2452-04 Standard Practice for Determining the Adhesion of Print Media Utilizing Mechanical Stress: Two Different Test Methods-Score/Tape and Cross Hatch
F2453/F2453M-05 Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
F2454-05 Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
F2456-04(2009) Standard Specification for Youth-Resistant Firearms Containers (YRFCs)
F2457-05(2009) Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft
F2458-05 Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
F2459-05 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
F2460-07 Standard Practice for Special Requirements for Bumper Boats
F2460-FRCA-07 Norme de pratique pour les exigences particulières concernant les bateaux tamponneurs
F2460-SP-07 Práctica estándar para Requisitos Especiales para Botes Chocones
F2461-09 Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
F2462-05 Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
F2463-06 Standard Terminology for Livestock, Meat, and Poultry Evaluation Systems
F2464-05 Standard Guide for Cleaning of Various Oiled Shorelines and Habitats
F2465-05 Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems
F2466-05 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
F2467-06 Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
F2468-05 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
F2469-05 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
F2471-08 Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
F2472-05 Standard Test Method for Performance of Staff-Serve Hot Deli Cases
F2473-05 Standard Test Method for Performance of Water-Bath Rethermalizers
F2474-05 Standard Test Method for Heat Gain to Space Performance of Commercial Kitchen Ventilation/Appliance Systems
F2475-05 Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
F2476-05 Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co 2TR) Through Barrier Materials Using An Infrared Detecto
F2477-07 Standard Test Methods forin vitro Pulsatile Durability Testing of Vascular Stents
F2479-07 Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
F2480-06 Standard Guide for In-ground Concrete Skatepark
F2482-08 Standard Specification for Load-Indicating Externally Threaded Fasteners
F2483-05 Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft
F2487-06 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines
F2488-05 Standard Terminology for Rolling Element Bearings
F2489-06 Standard Guide for Instrument and Precision Bearing Lubricants-Part 2 Greases
F2490-05e1 Standard Guide for Aircraft Electrical Load and Power Source Capacity Analysis
F2491-05 Standard Guide for Determining Load Ratios for Technical Rescue Systems and Equipment
F2493-08 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
F2494-05 Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment
F2495-05 Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment
F2496-05 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
F2497-05 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester
F2498-05 Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method
F2500-07 Standard Practice for Unmanned Aircraft System (UAS) Visual Range Flight Operations
F2501-06 Standard Practices for Unmanned Aircraft System Airworthiness
F2502-05 Standard Specification and Test Methods for Bioabsorbable Plates and Screws for Internal Fixation Implants
F2503-08 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
F2504-05 Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices
F2505-07 Standard Practice for Application of Federal Aviation Administration (FAA) Federal Aviation Regulations Part 21 Requirements to Unmanned Aircraft Systems (UAS)
F2506-07 Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers
F2507-05 Standard Specification for Recreational Airpark Design
F2509-06 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F2510/F2510M-07 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
F2511-05e1 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
F2512-07 Standard Practice for Quality Assurance in the Manufacture of Light Unmanned Aircraft System
F2514-08 Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading
F2516-07e2 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
F2517-09 Standard Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
F2518-06 Standard Guide for Use of a Residential Swimming Pool, Spa, and Hot Tub Safety Audit to Prevent Unintentional Drowning
F2519-05 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
F2520-05 Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets
F2521-09 Standard Specification for Heavy-Duty Ranges, Gas and Electric
F2522-05 Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards
F2523-07e1 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
F2524-06 Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications
F2527-05e1 Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
F2528-06 Standard Test Methods for Enteral Feeding Devices with a Retention Balloon
F2530-05 Standard Specification for Protective Headgear with Faceguard Used in Bull Riding
F2531-05 Standard Test Method for Load Capacity of Treestand Seats
F2532-06 Standard Guide for Determining Net Environmental Benefit of Dispersant Use
F2533-07 Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels
F2534-06 Standard Guide for Visually Estimating Oil Spill Thickness on Water
F2536-06b Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
F2537-06 Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
F2538-07a Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft
F2541-06 Standard Guide for Unmanned Undersea Vehicles (UUV) Autonomy and Control
F2542-05 Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities
F2544-06e1 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
F2545-07 Standard Guide for Unmanned Undersea Vehicle (UUV) Physical Payload Interface
F2546-07 Standard Test Method for Snowboard Step-in Bindings
F2547-06 Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
F2548-06 Standard Specification for Expanded Metal Fence Systems for Security Purposes
F2549-09a Standard Consumer Safety Specification for Frame Child Carriers
F2550-06 Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall
F2551-09 Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
F2553-08 Standard Specification for Warnings on Refillable CO2 Cylinders Used In the Sport of Paintball
F2555-06 Standard Practice for Determining Page Yield of Ink Jet Printer Cartridges-Continuous Printing Method
F2559-06 Standard Guide for Writing a Specification for Sterilizable Peel Pouches
F2560-06 Standard Specification for Supralaryngeal Airways and Connectors
F2561-06 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
F2562/F2562M-08 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
F2563-06 Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation
F2564-06 Standard Specification for Design and Performance of a Light Sport Glider
F2565-06 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
F2567-06 Standard Practice for Testing for Classical Pathway Complement Activation in Serum by Solid Materials
F2568-06 Standard Test Method for Measurement of Sleeping Bags
F2569-07 Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
F2573-06 Standard Specification for Low Velocity Resilient Material Projectile
F2574-06 Standard Specification for Low Velocity Projectile Marker
F2575-06 Standard Guide for Quality Assurance in Translation
F2576-09 Standard Terminology Relating to Declarable Substances in Materials
F2577-06 Standard Guide for Assessment of Materials and Products for Declarable Substances
F2579-08 Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
F2580-09 Standard Test Method for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis
F2581-07 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
F2582-08 Standard Test Method for Impingement of Acetabular Prostheses
F2584-06 Standard Practice for Maintenance and Development of Maintenance Manuals for Light Unmanned Aircraft System (UAS)
F2585-08 Standard Specification for Design and Performance of Pneumatic-Hydraulic Unmanned Aircraft System (UAS) Launch System
F2588-07 Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles
F2589-06 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
F2590-06e1 Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
F2591-06 Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
F2592-09 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
F2594-07 Standard Guide for Unmanned Undersea Vehicle (UUV) Communications
F2595-07 Standard Guide for Unmanned Undersea Vehicle (UUV) Sensor Data Formats
F2598-09 Standard Consumer Safety Specification for Clothing Storage Chests
F2599-06 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
F2600-09 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
F2601-09 Standard Specification for Fire Safety for Candle Accessories
F2602-08e1 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
F2603-06 Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds
F2605-08e1 Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
F2606-08 Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
F2607-08 Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
F2608-07 Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
F2609-07 Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners
F2611-06 Standard Guide for Design and Construction of Chain Link Security Fencing
F2612-07 Standard Practice for Design and Manufacture of Turbine Engines for Unmanned Aircraft System
F2613-09 Standard Consumer Safety Specification for Children's Folding Chairs
F2617-08e1 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
F2618-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
F2619/F2619M-07 Standard Specification for High-Density Polyethylene (PE) Line Pipe
F2620-06 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
F2621-06 Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure
F2622-08e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
F2624-07 Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Spinal Motion Preserving Implants
F2625-07 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
F2626-07 Standard Terminology for Light Sport Aircraft
F2630-07 Standard Guide for Self-Closing/Self-Latching General-Purpose Gates
F2631-07 Standard Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities
F2632-07 Standard Practice for Determining the Toner Usage for Color Printer Cartridges
F2633-07 Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
F2634-07 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
F2635-07 Standard Classification for Unmanned Aircraft Pilot Certification
F2636-08 Standard Practice for Commercial Unmanned Aircraft System (UAS) Pilot Practical Test Standards for Unmanned Aircraft Single-Engine Land (SEL) Remote Control and Autonomous/Semiautonomous
F2638-07 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
F2639-07 Standard Practice for Design, Alteration, and Certification of Airplane Electrical Wiring Systems
F2640-09 Standard Consumer Safety Specification for Booster Seats
F2641-08 Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
F2642-08 Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes
F2643-09 Standard Specification for Powered Pot, Pan and Utensil Washing Sinks
F2644-07 Standard Test Method for Performance of Commercial Patio Heaters
F2645-07 Standard Specification for Bun Slicing Machines
F2646-07 Standard Specification for Bread Slicing Machines
F2647-07 Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System)
F2648/F2648M-07 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
F2649-08a Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
F2650-07 Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment
F2651-08b Standard Terminology Relating to Soil and Turfgrass Characteristics of Natural Playing Surfaces
F2653-07 Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
F2654-07 Standard Specification for Low Energy Air Gun (LEAG) Warnings
F2656-07 Standard Test Method for Vehicle Crash Testing of Perimeter Barriers
F2657-07 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
F2658-07 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
F2661-07 Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
F2662-08 Standard Guide for Minimum Training of Dispatchers and Telecommunicators of SAR Incidents
F2663-07a Standard Test Method for Bead Unseating of Tubeless Tires for Motor Vehicles with GVWR of 4536 kg (10 000 lb) or Less
F2664-07 Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods
F2665-09 Standard Specification for Total Ankle Replacement Prosthesis
F2666-07 Standard Specification for Aboveground Portable Pools for Residential Use
F2667-07 Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Unmanned Aircraft Systems
F2668-07 Standard Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles
F2669-09 Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides
F2670-09 Standard Consumer Safety Specification for Infant Bath Tubs
F2673-08 Standard Safety Specification for Special Tip-Resistant Movable Soccer Goals
F2674-07 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]
F2676-09 Standard Test Method for Determining the Protective Performance of an Arc Protective Blanket for Electric Arc Hazards
F2677-08a Standard Specification for Electrically Insulating Aprons
F2679-07 Standard Specification for 6 mm Projectiles Used with Low Energy Air Guns
F2680-09 Standard Specification for Manually Operated Front Wheel Retention Systems for Bicycles
F2681-08 Standard Specification for Body Protectors Used in Equine Racing
F2682-07 Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
F2684-07 Standard Test Method for Portable High Anchor Devices
F2685-07 Standard Guide for Training of a Level II Land Search Team Member
F2687-07 Standard Practice for Life Cycle Cost Analysis of Commercial Food Service Equipment
F2688-08 Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
F2689-08 Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Unmanned Aircraft Systems
F2690-08 Standard Guide for Suggested Procedures for Applying for a Flight Authority for an Unmanned Aircraft System: Part I and Part II
F2694-07 Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses
F2695-07 Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications
F2696-08 Standard Practice for Inspection of Airplane Electrical Wiring Systems
F2698-08 Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities
F2699-08 Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
F2700-08 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating
F2701-08 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with a Hot Liquid Splash
F2702-08 Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction
F2703-08 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction
F2706-08 Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model
F2709-08 Standard Test Method for Determining Nameplate Recovery Rate of Stationary Oil Skimmer Systems
F2710-08 Standard Consumer Safety Performance Specification for Commercial Cribs
F2711-08 Standard Test Methods for Bicycle Frames
F2713-09 Standard Specification for Eye Protectors for Field Hockey
F2714-08 Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
F2715-09 Standard Specification for Temporary Protective Equipotential Bond Mat To Be Used on De-Energized Equipment
F2716-08 Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
F2717-08 Standard Guide for Development of an Independent Third-Party Verification
F2718-09 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines
F2719-09 Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
F2720/F2720M-08 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
F2721-09 Standard Guide for Pre-clinical in vivo Evaluation in Critical Size Segmental Bone Defects
F2722-08 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
F2723-08 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
F2724-08 Standard Test Method for Evaluating Mobile Bearing Knee Dislocation
F2725-08 Standard Guide for European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange
F2726-08 Standard specification for fixation devices for tracheal tubes and other airway devices
F2727-09 Standard Guide for Manufacturers for Labeling Headgear Products
F2730/F2730M-08 Standard Specification for Silicon Nitride Cylindrical Bearing Rollers
F2732-09 Standard Practice for Determining the Temperature Ratings for Cold Weather Protective Clothing
F2733-09 Standard Specification for Flame Resistant Rainwear for Protection Against Flame Hazards
F2734-08 Standard Practice for Testing the Shelf Life of Ink Jet Printer Cartridges
F2735-08a Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
F2739-08 Standard Guide for Quantitating Cell Viability Within Biomaterial Scaffolds
F2746-09 Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane
F2748-08 Standard Specification for Low Energy Air Guns (Less Than 1 Joule)
F2749-08 Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Assembly
F2750-09 Standard Test Method for Determining the Effects of Bending a Membrane Switch or Assembly
F2751-09 Standard Guide for Training of Support Level Land Rescue Team Member (LRT-Support) Member
F2752-09 Standard Guide for Training for Level I Rope Rescue (R1) Rescuer Endorsement
F2754/F2754M-09 Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire
F2756-09 Standard Test Method for Standard Test Method for Determining Energy Consumption of Vacuum Cleaners
F2757-09 Standard Guide for Home Laundering Care and Maintenance of Flame, Thermal and Arc Resistant Clothing
F2759-09 Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
F2760-09 Standard Practice for Testing Ink Jet Cartridge Latency (Start-Up)
F2765-09 Standard Specification for Total Lead Content in Synthetic Turf Fibers
F2767-09 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
F2769-09 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
F2773-09 Standard Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders
F2780-09 Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers
F2781-09 Standard Practice for Testing Forced Entry Resistance of Security Fence Systems
F2785-09 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
F2787-09 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
F2788-09 Standard Specification for Crosslinked Polyethylene (PEX) Pipe
F2791-09 Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
F2792-09 Standard Terminology for Additive Manufacturing Technologies
F2796-09 Standard Specification for Hot Food Holding Tables
|