Standards Search: E

E1-13 Standard Specification for ASTM Liquid-in-Glass Thermometers

E3-11 Standard Guide for Preparation of Metallographic Specimens

E4-13 Standard Practices for Force Verification of Testing Machines

E6-09be1 Standard Terminology Relating to Methods of Mechanical Testing

E6-RUS-09be1 Стандартная терминология по методам механических испытаний

E7-03(2009) Standard Terminology Relating to Metallography

E8/E8M-13a Standard Test Methods for Tension Testing of Metallic Materials

E9-09 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

E10-12 Standard Test Method for Brinell Hardness of Metallic Materials

E10-RUS-12 Стандартный метод определения твердости по Бринеллю для материалов с металлическими свойствами

E11-09e1 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves

E11-RUS-09e1 Стандартная на проволочную ситоткань и сита для испытательных целей

E18-12 Standard Test Methods for Rockwell Hardness of Metallic Materials

E18-RUS-12 Стандартные методы определения твердости по Роквеллу материалов с металлическими свойствами

E21-09 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

E21-RUS-09 Стандартные методы испытаний металлических материалов на растяжение при повышенных температурах

E23-12c Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

E28-99(2009) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus

E28-RUS-99(2009) Стандартные методы определения температуры размягчения смол, взятых из шкиперского имущества, методом кольца и шара

E29-08 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E29-RUS-08 Стандартная методика использования значащих цифр в данных по испытаниям для определения соответствия техническим условиям

E32-86(2006)e1 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition

E34-11e1 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

E37-05(2011) Standard Test Methods for Chemical Analysis of Pig Lead

E41-92(2010) Terminology Relating to Conditioning

E45-13 Standard Test Methods for Determining the Inclusion Content of Steel

E50-11 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

E53-07 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

E53-RUS-07 Стандартный метод определения меди в нелегированной меди с помощью гравиметрии

E55-11 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

E60-11 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

E69-02(2007) Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus

E70-07 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode

E70-RUS-07 Стандартный метод испытаний для определения показателя рН водных растворов с помощью стеклянного электрода

E72-10 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

E73-13 Standard Practice for Static Load Testing of Truss Assemblies

E74-13a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines

E77-07 Standard Test Method for Inspection and Verification of Thermometers

E77-RUS-07 Стандартный метод контроля и поверки термометров

E81-96(2011) Standard Test Method for Preparing Quantitative Pole Figures

E82-09 Standard Test Method for Determining the Orientation of a Metal Crystal

E83-10a Standard Practice for Verification and Classification of Extensometer Systems

E83-RUS-10a Стандартное практическое руководство по поверке и классификации систем экстензометров

E84-13a Standard Test Method for Surface Burning Characteristics of Building Materials

E88-11 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition

E90-09 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

E94-04(2010) Standard Guide for Radiographic Examination

E95-68(2011) Standard Specification for Cell-Type Oven with Controlled Rates of Ventilation

E96/E96M-12 Standard Test Methods for Water Vapor Transmission of Materials

E100-10 Standard Specification for ASTM Hydrometers

E102/E102M-93(2009) Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures

E103-12 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials

E104-02(2012) Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions

E105-10 Standard Practice for Probability Sampling Of Materials

E105-RUS-10 Стандартная методика вероятностной выборки материалов

E108-11 Standard Test Methods for Fire Tests of Roof Coverings

E110-10 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers

E110-RUS-10 Стандартный метод испытания для определения твердости металлических материалов методом вдавливания с использованием переносных твердомеров

E111-04(2010) Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

E112-12 Standard Test Methods for Determining Average Grain Size

E114-10 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

E119-12a Standard Test Methods for Fire Tests of Building Construction and Materials

E122-09e1 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

E122-RUS-09e1 Стандартная методика расчета объема выборки для оценки средних показателей партии или процесса с заданной сходимостью

E123-02(2012) Standard Specification for Apparatus for Determination of Water by Distillation

E124-94(2010) Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis

E125-63(2013) Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings

E126-13 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers

E127-10 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks

E128-99(2011) Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use

E131-10 Standard Terminology Relating to Molecular Spectroscopy

E132-04(2010) Standard Test Method for Poisson's Ratio at Room Temperature

E133-92(2010) Standard Specification for Distillation Equipment

E135-11b Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials

E136-12 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C

E139-11 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

E140-12be1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

E141-10 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling

E143-02(2008) Standard Test Method for Shear Modulus at Room Temperature

E144-94(2011) Standard Practice for Safe Use of Oxygen Combustion Bombs

E145-94(2011) Standard Specification for Gravity-Convection and Forced-Ventilation Ovens

E145-RUS-94(2011) Стандартная спецификация на термостаты с гравитационной и принудительной конвекцией

E147-61(2011) Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method

E154/E154M-08a(2013)e1 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

E155-10 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

E159-10 Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)

E161-12 Standard Specification for Precision Electroformed Sieves

E162-13 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

E164-13 Standard Practice for Contact Ultrasonic Testing of Weldments

E165/E165M-12 Standard Practice for Liquid Penetrant Examination for General Industry

E168-06 Standard Practices for General Techniques of Infrared Quantitative Analysis

E169-04(2009) Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis

E170-10 Standard Terminology Relating to Radiation Measurements and Dosimetry

E171/E171M-11 Standard Practice for Conditioning and Testing Flexible Barrier Packaging

E175-82(2010) Standard Terminology of Microscopy

E176-13 Standard Terminology of Fire Standards

E177-13 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

E178-08 Standard Practice for Dealing With Outlying Observations

E179-12 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials

E181-10 Standard Test Methods for Detector Calibration and Analysis of Radionuclides

E185-10 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels

E186-10 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings

E186-RUS-10 Стандартные эталонные рентгенограммы толстостенных (толщиной от 2 до 41/2 дюйма (от 50.8 до 114 мм)) стальных литых изделий

E190-92(2008) Standard Test Method for Guided Bend Test for Ductility of Welds

E190-RUS-92(2008) Стандартный метод испытания на управляемый изгиб для определения пластичности сварных швов

E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds

E192-13 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications

E193-94(2010) Standard Specification for Laboratory Glass Micropipets

E194-10 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders

E196-06(2012) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs

E200-08 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis

E202-12 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols

E203-08 Standard Test Method for Water Using Volumetric Karl Fischer Titration

E203-RUS-08 Стандартный метод определения содержания воды с помощью вольюметрического титрования по методу Карла Фишера

E204-98(2007) Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index

E205-96(2010) Standard Specification for Glass and Oxygen Combustion Flask

E207-08 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties

E208-06(2012) Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels

E209-00(2010) Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates

E210-63(2010) Standard Specification for Microscope Objective Thread

E211-82(2010) Standard Specification for Cover Glasses and Glass Slides for Use in Microscopy

E213-09 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing

E213-RUS-09 Стандартная методика проведения ультразвуковой дефектоскопии металлических труб и трубопроводов

E215-11 Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube

E220-07a Standard Test Method for Calibration of Thermocouples By Comparison Techniques

E222-10 Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation

E223-08 Standard Test Methods for Analysis of Sulfuric Acid

E224-08 Standard Test Methods for Analysis of Hydrochloric Acid

E228-11 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer

E230/E230M-12 Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples

E235/E235M-12 Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications

E236-66(2011) Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups

E237-02(2012) Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)

E238-12 Standard Test Method for Pin-Type Bearing Test of Metallic Materials

E241-09 Standard Guide for Limiting Water-Induced Damage to Buildings

E242-01(2010) Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed

E243-09 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes

E243-RUS-09 Стандартное практическое руководство по электромагнитной дефектоскопии (вихревыми токами) трубок из меди и медных сплавов

E246-10 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry

E247-01(2010) Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

E248-12 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

E250-98(2009) Standard Practice for Use of CODEN

E251-92(2009) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages

E252-06 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement

E253-13 Standard Terminology Relating to Sensory Evaluation of Materials and Products

E255-07 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

E256-09 Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition

E258-07 Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method

E259-06(2011) Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries

E260-96(2011) Standard Practice for Packed Column Gas Chromatography

E261-10 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques

E262-13 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques

E263-13 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron

E264-08(2013) Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel

E265-07(2013) Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32

E266-11 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum

E272-10 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings

E273-10 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

E274/E274M-11 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

E275-08(2013) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers

E275-RUS-08(2013) Стандартная методика описания и измерения технических характеристик спектрофотометров в ультрафиолетовой и видимой области спектра

E276-03(2008)e1 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials

E278-01(2010)e1 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry

E279-97(2010) Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test

E280-10 Standard Reference Radiographs for Heavy-Walled (4½ to 12-in. (114 to 305-mm)) Steel Castings

E283-04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

E284-13a Standard Terminology of Appearance

E285-08 Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials

E287-02(2012) Standard Specification for Laboratory Glass Graduated Burets

E288-10 Standard Specification for Laboratory Glass Volumetric Flasks

E289-04(2010) Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry

E290-13 Standard Test Methods for Bend Testing of Material for Ductility

E291-09 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)

E292-09e1 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

E295-82(2006) Standard Test Method for Measured Speed of Oil Diffusion Pumps

E296-70(2010) Standard Practice for Ionization Gage Application to Space Simulators

E298-08 Standard Test Methods for Assay of Organic Peroxides

E299-08 Standard Test Method for Trace Amounts of Peroxides In Organic Solvents

E299-RUS-08 Стандартный метод определения микропримесей пероксидов в органических растворителях

E300-03(2009) Standard Practice for Sampling Industrial Chemicals

E300-RUS-03(2009) Стандартная методика отбора проб промышленных химических продуктов

E303-93(2008) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

E305-13 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves

E307-72(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures

E308-12 Standard Practice for Computing the Colors of Objects by Using the CIE System

E309-11 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

E310-10 Standard Reference Radiographs for Tin Bronze Castings

E312-06(2011) Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC)

E313-10 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates

E313-RUS-10 Стандартная методика для вычисления индексов желтизны и белизны по координатам цвета, измеренным с помощью приборов

E314-10 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques

E316-11 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry

E317-11 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

E319-85(2008) Standard Practice for the Evaluation of Single-Pan Mechanical Balances

E321-96(2012) Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)

E322-12 Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry

E322-RUS-12 СТАНДАРТНЫЙ МЕТОД АНАЛИЗА НИЗКОЛЕГИРОВАННЫХ СТАЛЕЙ И ЧУГУНА С ПОМОЩЬЮ РЕНТГЕНОФЛУОРЕСЦЕНТНОЙ СПЕКТРОМЕТРИИ С ДИСПЕРСИЕЙ ПО ДЛИНАМ ВОЛН

E323-11 Standard Specification for Perforated-Plate Sieves for Testing Purposes

E328-02(2008) Standard Test Methods for Stress Relaxation Tests for Materials and Structures

E329-13 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

E330-02(2010) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

E331-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

E334-01(2013) Standard Practice for General Techniques of Infrared Microanalysis

E336-11 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings

E337-02(2007) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)

E340-00(2006) Standard Test Method for Macroetching Metals and Alloys

E340-RUS-00(2006) Металлы и сплавы. Стандартный метод контроля макроструктуры травлением

E341-08 Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance

E342-11 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry

E344-13 Terminology Relating to Thermometry and Hydrometry

E345-93(2008) Standard Test Methods of Tension Testing of Metallic Foil

E346-08 Standard Test Method for Analysis of Methanol

E346-RUS-08 Стандартные методы анализа метанола

E349-06 Standard Terminology Relating to Space Simulation

E350-12 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

E350-RUS-12 СТАНДАРТНЫЕ МЕТОДЫ ХИМИЧЕСКОГО АНАЛИЗА УГЛЕРОДИСТОЙ СТАЛИ, НИЗКОЛЕГИРОВАННОЙ СТАЛИ, КРЕМНИЙСОДЕРЖАЩЕЙ ЭЛЕКТРОТЕХНИЧЕСКОЙ СТАЛИ, ЛИТОГО ЖЕЛЕЗА И КОВКОЙ МЯГКОЙ СТАЛИ

E351-13 Standard Test Methods for Chemical Analysis of Cast Iron—All Types

E352-13 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

E353-93(2006) Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

E353-RUS-93(2006) Сплавы нержавеющие жаропрочные мартенситно-стареющие и другие аналогичные хром-никель-железные. Методы химического анализа

E354-93(2006) Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

E355-96(2007) Standard Practice for Gas Chromatography Terms and Relationships

E359-10 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)

E363-09 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium

E367-09 Standard Test Methods for Chemical Analysis of Ferroniobium

E372-01(2006) Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon

E376-11 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods

E377-08 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials

E381-01(2012) Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

E381-RUS-01(2012) СТАНДАРТНЫЙ МЕТОД КОНТРОЛЯ МАКРОСТРУКТУРЫ ТРАВЛЕНИЕМ ДЛЯ СТАЛЬНОГО СОРТОВОГО ПРОКАТА, СУТУНОК, БЛЮМОВ И ПОКОВОК

E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets

E384-11e1 Standard Test Method for Knoop and Vickers Hardness of Materials

E384-RUS-11e1 Стандартный метод испытаний материалов на твердость по Кнупу и Виккерсу

E385-11 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique

E386-90(2011) Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy

E387-04(2009) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method

E388-04(2009) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ,

E389-03(2008)e1 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials

E390-11 Standard Reference Radiographs for Steel Fusion Welds

E393-13 Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters

E394-09 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method

E394-RUS-09 Стандартный метод определения микросодержания железа с помощью 1,10-фенантролина

E396-12e1 Standard Test Methods for Chemical Analysis of Cadmium

E398-03(2009)e1 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement

E399-12e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

E405-04(2012) Standard Test Methods for Wear Testing Rotary Operators for Windows

E406-81(2012) Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis

E407-07e1 Standard Practice for Microetching Metals and Alloys

E408-13 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques

E410-08 Standard Test Method for Moisture and Residue in Liquid Chlorine

E411-12 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine

E413-10 Classification for Rating Sound Insulation

E415-08 Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel

E415-RUS-08 Стандартный Метод атомно-эмиссионного вакуумного спектрометричского анализа углеродистой и низколегированной стали

E422-05(2011) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter

E423-71(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens

E424-71(2007) Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials

E426-12 Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

E428-08(2013) Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

E430-11 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry

E431-96(2011) Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices

E432-91(2011) Standard Guide for Selection of a Leak Testing Method

E433-71(2013) Standard Reference Photographs for Liquid Penetrant Inspection

E434-10 Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation

E436-03(2008) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels

E436-RUS-03(2008) Стандартный метод испытания ферритных сталей на разрыв падающим грузом

E438-92(2011) Standard Specification for Glasses in Laboratory Apparatus

E439-10 Standard Test Methods for Chemical Analysis of Beryllium

E444-09 Standard Guide for Scope of Work of Forensic Document Examiners

E445/E445M-88(2008) Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires

E446-10 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness

E446-RUS-10 Стандартные эталонные рентгенограммы стальных литых изделий толщиной до 2 дюймов (50.8 мм)

E448-82(2008) Standard Practice for Scleroscope Hardness Testing of Metallic Materials

E449-08(2013) Standard Test Methods for Analysis of Calcium Chloride

E452-02(2013) Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer

E454-12 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)

E455-11 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

E456-12e1 Standard Terminology Relating to Quality and Statistics

E457-08 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter

E458-08 Standard Test Method for Heat of Ablation

E459-05(2011) Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter

E460-12 Standard Practice for Determining Effect of Packaging on Food and Beverage Products During Storage

E463-09 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry

E465-11 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry

E466-07 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials

E466-RUS-07

Стандартное практическое руководство по проведению испытаний металлических материалов на усталость в осевом направлении в условиях регулируемого усилия и постоянной амплитуды

E467-08e1 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System

E468-11 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials

E471-96(2011) Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing

E473-11a Standard Terminology Relating to Thermal Analysis and Rheology

E475-10 Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography

E477-06a Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers

E478-08 Standard Test Methods for Chemical Analysis of Copper Alloys

E479-91(2006) Standard Guide for Preparation of a Leak Testing Specification

E481-10 Standard Test Method for Measuring Neutron Fluence Rate by Radioactivation of Cobalt and Silver

E482-11e1 Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID)

E487-09 Standard Test Method for Constant-Temperature Stability Of Chemical Materials

E488/E488M-10 Standard Test Methods for Strength of Anchors in Concrete Elements

E490-00a(2006) Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables

E491-73(2010) Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft

E492-09 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine

E493/E493M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode

E494-10 Standard Practice for Measuring Ultrasonic Velocity in Materials

E496-09 Standard Test Method for Measuring Neutron Fluence and Average Energy from 3H(d,n)4He Neutron Generators by Radioactivation Techniques 1

E498/E498M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode

E499/E499M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode

E501-08 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

E502-07e1 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods

E505-01(2011) Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings

E506-08 Standard Test Method for Mercury in Liquid Chlorine

E507-09 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry

E508-09 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry

E509-03(2008) Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels

E511-07 Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer

E512-94(2010) Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation

E514/E514M-11 Standard Test Method for Water Penetration and Leakage Through Masonry

E515-11 Standard Practice for Leaks Using Bubble Emission Techniques

E516-95a(2013) Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography

E517-00(2010) Standard Test Method for Plastic Strain Ratio r for Sheet Metal

E518/E518M-10 Standard Test Methods for Flexural Bond Strength of Masonry

E519/E519M-10 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages

E520-08 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry

E521-96(2009)e1 Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation

E523-11 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper

E524-08 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

E526-08(2013) Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium

E527-12 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

E529-04(2011) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction

E531-13 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials

E534-08 Standard Test Methods for Chemical Analysis of Sodium Chloride

E535-12 Standard Practice for Preparation of Fire-Test-Response Standards

E536-08 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys

E537-12 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry

E538-98(2008) Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)

E539-11 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry

E541-10 Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building

E542-01(2012) Standard Practice for Calibration of Laboratory Volumetric Apparatus

E543-13 Standard Specification for Agencies Performing Nondestructive Testing

E544-10 Standard Practices for Referencing Suprathreshold Odor Intensity

E545-05(2010) Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination

E546-08 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units

E547-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

E549-87(2008) Standard Guide for Preparing Field Sprayer Calibration Procedures

E550-87(2008) Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures

E556/E556M-11 Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

E557-12 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions

E561-10e2 Standard Test Method for K-R Curve Determination

E562-11 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

E563-11 Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature

E564-06(2012) Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings

E566-09 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals

E569/E569M-13 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

E570-09 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

E570-RUS-09 Стандартная методика контроля рассеяния магнитного потока стальных ферромагнитных трубных изделий

E571-12 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

E572-12 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-ray Fluorescence Spectrometry

E573-01(2013) Standard Practices for Internal Reflection Spectroscopy

E574-13 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation

E575-05(2011) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

E576-08 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position

E578-07(2013) Standard Test Method for Linearity of Fluorescence Measuring Systems

E579-04(2009) Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution

E580/E580M-11b Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions

E581-10 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

E582-07 Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures

E585/E585M-12 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable

E587-10 Standard Practice for Ultrasonic Angle-Beam Contact Testing

E588-03(2009) Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method

E592-99(2009)e1 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60

E594-96(2011) Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography

E595-07 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment

E596-96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures

E598-08 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter

E601-07a(2013) Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air

E603-12b Standard Guide for Room Fire Experiments

E604-83(2008) Standard Test Method for Dynamic Tear Testing of Metallic Materials

E605-93(2011) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

E606/E606M-12 Standard Test Method for Strain-Controlled Fatigue Testing

E608/E608M-06 Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples

E609-10 Standard Terminology Relating to Pesticides

E611-08 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography

E617-13 Standard Specification for Laboratory Weights and Precision Mass Standards

E618-07(2013) Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine

E619-09 Standard Practice for Evaluating Foreign Odors in Paper Packaging

E620-11 Standard Practice for Reporting Opinions of Scientific or Technical Experts

E631-06 Standard Terminology of Building Constructions

E633-00(2005) Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air

E634-12 Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry

E636-10 Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E 706 (IH)

E637-05(2011) Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure

E640-06(2012) Standard Test Method for Preservatives in Water-Containing Cosmetics

E641-01(2012)e1 Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture

E642-91(2008) Standard Practice for Determining Application Rates and Distribution Patterns from Aerial Application Equipment

E643-09 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material

E644-11 Standard Test Methods for Testing Industrial Resistance Thermometers

E645-13 Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems

E646-07 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

E647-13e1 Standard Test Method for Measurement of Fatigue Crack Growth Rates

E648-10e1 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

E649-00(2011) Standard Test Method for Bromine in Chlorine

E650/E650M-12 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

E651/E651M-01(2008) Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building

E652-91(2009) Standard Test Method for Nonresidual Liquid Household Insecticides Against Flying Insects

E653-91(2009) Standard Test Method for Effectiveness of Aerosol and Pressurized Space Spray Insecticides Against Flying Insects

E654-96(2009) Standard Test Method for Effectiveness of Aerosol and Pressurized Spray Insecticides Against Cockroaches

E659-78(2005) Standard Test Method for Autoignition Temperature of Liquid Chemicals

E659-RUS-78(2005) Стандартный метод определения температуры самовозгорания жидких химических веществ

E660-90(2011) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine

E661-03(2009) Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

E662-13c Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

E664/E664M-10 Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

E666-09 Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation

E667-98(2009) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers

E668-13 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices

E670-09 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter

E671-98(2010) Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus

E672-87(2011) Standard Specification for Disposable Glass Micropipets

E674-12 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)

E675-02(2012) Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers

E676-02(2012) Standard Specification for Interchangeable Taper-Ground Joints

E677-94(2010) Standard Specification for Interchangeable Spherical Ground Joints

E678-07(2013) Standard Practice for Evaluation of Scientific or Technical Data

E679-04(2011) Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits

E680-79(2011)e1 Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials

E681-09 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)

E682-92(2011) Standard Practice for Liquid Chromatography Terms and Relationships

E683-91(2007) Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings

E685-93(2013) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography

E688-94(2011) Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing

E689-10 Standard Reference Radiographs for Ductile Iron Castings

E690-10 Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes

E691-13 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

E693-12 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)

E694-99(2010) Standard Specification for Laboratory Glass Volumetric Apparatus

E695-03(2009) Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

E696-07(2013) Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire

E697-96(2011) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography

E698-11 Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method

E699-09 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components

E701-80(2010) Standard Test Methods for Municipal Ferrous Scrap

E702-85(2010) Standard Specification for Municipal Ferrous Scrap

E703-09 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals

E704-13 Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238

E705-08 Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237

E708-79(2011) Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers

E709-08 Standard Guide for Magnetic Particle Testing

E709-RUS-08 Стандартное руководство по магнитопорошковой дефектоскопии

E712-80(2009) Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems

E714-94(2009) Standard Specification for Disposable Glass Serological Pipets

E715-80(2011) Standard Specification for Gravity-Convection and Forced-Circulation Water Baths

E716-10 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis

E720-11 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics

E721-11 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics

E722-09e1 Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics

E723-13 Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)

E724-98(2012) Standard Guide for Conducting Static Acute Toxicity Tests Starting with Embryos of Four Species of Saltwater Bivalve Molluscs

E725-96(2012) Standard Test Method for Sampling Granular Carriers and Granular Pesticides

E726-01(2011)e1 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides

E727/E727M-08 Determining Bulk Density of Granular Carriers and Granular Pesticides

E728-91(2009) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides

E729-96(2007) Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians

E732-80(2011) Standard Specification for Disposable Pasteur-Type Pipet

E734-80(2010) Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)

E736-00(2011) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members

E738-11 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry

E739-10 Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data

E740/E740M-03(2010)e2 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens

E741-11 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution

E744-07 Standard Practice for Evaluating Solar Absorptive Materials for Thermal Applications

E745-80(2009) Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems

E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems

E747-04(2010) Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

E748-02(2008) Standard Practices for Thermal Neutron Radiography of Materials

E749/E749M-12 Standard Practice for Acoustic Emission Monitoring During Continuous Welding

E750-10 Standard Practice for Characterizing Acoustic Emission Instrumentation

E751/E751M-12 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding

E754-80(2006) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints

E755-08 Standard Test Method for Dicumyl Peroxide, Assay (Liquid Chromatography)

E756-05(2010) Standard Test Method for Measuring Vibration-Damping Properties of Materials

E759-92(2011) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members

E760-92(2011) Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members

E761-92(2011) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members

E766-98(2008)e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope

E768-99(2010) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel

E772-11 Standard Terminology of Solar Energy Conversion

E775-87(2008)e1 Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel

E776-87(2009) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel

E777-08 Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel

E778-08 Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel

E779-10 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization

E780-06(2011) Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Thermocouple Cable at Room Temperature

E781-86(2009) Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates

E782-95(2007) Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode

E783-02(2010) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors

E784-89(2011) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp

E785-81(2011) Standard Specification for Crucibles, Ignition, Laboratory, Metal

E786-81(2011) Standard Specification for Dishes, Evaporating, Platinum

E787-81(2011) Standard Specification for Disposable Glass Micro Blood Collection Pipets

E788-97(2008) Standard Specification for Pipet, Blood Diluting

E790-08 Standard Test Method for Residual Moisture in a Refuse-Derived Fuel Analysis Sample

E791-08 Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases

E793-06(2012) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry

E794-06(2012) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis

E795-05(2012) Standard Practices for Mounting Test Specimens During Sound Absorption Tests

E797/E797M-10 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

E798-96(2009) Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources

E799-03(2009) Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis

E800-07 Standard Guide for Measurement of Gases Present or Generated During Fires

E801-06(2011) Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices

E802-95(2010) Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness

E803-91(2013) Standard Test Method for Determining the L/D?Ratio of Neutron Radiography Beams

E805-12a Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials

E806-08 Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)

E808-01(2009) Standard Practice for Describing Retroreflection

E809-08(2013) Standard Practice for Measuring Photometric Characteristics of Retroreflectors

E810-03(2013) Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry

E811-09 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions

E814-11a Standard Test Method for Fire Tests of Penetration Firestop Systems

E815-11 Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry

E816-05(2010) Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers

E821-96(2009) Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation

E822-92(2009) Standard Practice for Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls

E824-10 Standard Test Method for Transfer of Calibration From Reference to Field Radiometers

E825-98(2009) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature

E826-08(2013) Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry

E827-08 Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy

E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

E832-81(2008) Standard Specification for Laboratory Filter Papers

E833-12 Standard Terminology of Building Economics

E834-09 Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger

E837-08e2 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method

E839-11 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable

E840-95(2013) Standard Practice for Using Flame Photometric Detectors in Gas Chromatography

E841-12a Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry

E844-09 Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance, E 706(IIC)

E848-94(2012) Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates

E850-10 Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill

E853-13 Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results

E854-03(2009) Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)

E855-08(2013) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

E857-05(2012) Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species

E859-93(2011) Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members

E860-07(2013) Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation

E861-94(2007) Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors

E864-12 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E865-12 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels

E866-11 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E867-06(2012) Standard Terminology Relating to Vehicle-Pavement Systems

E870-82(2013) Standard Test Methods for Analysis of Wood Fuels

E871-82(2006) Standard Test Method for Moisture Analysis of Particulate Wood Fuels

E872-82(2006) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels

E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels

E874-11 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels

E875-10 Standard Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry

E877-08 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition

E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry

E879-12 Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements

E881-92(2009) Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode

E882-10 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory

E883-11 Standard Guide for Reflected–Light Photomicrography

E884-82(2012) Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities

E887-88(2009) Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash

E889-82(2009) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream

E890-94(2009) Standard Specification for Disposable Glass Culture Tubes

E894-88(2010) Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings

E898-88(2005) Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances

E900-02(2007) Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials, E706 (IIF)

E903-12 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres

E904-87(2007) Standard Practice for Generating All-Day Thermal Performance Data for Solar Collectors

E905-87(2007) Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors

E906/E906M-10 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method

E908-98(2012) Standard Practice for Calibrating Gaseous Reference Leaks

E910-07(2013) Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)

E911-98(2009) Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs

E915-10 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement

E917-05(2010) Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems

E918-83(2011) Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure

E920-97(2008) Standard Specification for Commercially Packaged Laboratory Apparatus

E921-97(2010) Standard Specification for Export Packaged Laboratory Apparatus

E923-97(2008) Standard Specification for Glass Westergren Tube, Reusable

E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm

E927-10 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing

E928-08 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry

E929-83(2009) Standard Test Method for Measuring Electrical Energy Requirements of Processing Equipment

E930-99(2007) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)

E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers

E934-94(2009) Standard Specification for Serological Pipet, Disposable Plastic

E935-13 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings

E937-93(2011) Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

E938/E938M-12 Standard Test Method for Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Adult Human Lice

E939-94(2012) Standard Test Method of Field Testing Topical Applications of Compounds as Repellents for Medically Important and Pest Arthropods (Including Insects, Ticks, and Mites):I Mosquitoes

E942-96(2011) Standard Guide for Simulation of Helium Effects in Irradiated Metals

E943-08 Standard Terminology Relating to Biological Effects and Environmental Fate

E944-13 Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, E 706 (IIA)

E945-12 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry

E947-83(2007) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis

E948-09 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight

E950/E950M-09 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference

E951-94(2006) Standard Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin

E953/E953M-08 Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash

E955-88(2009)e1 Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples

E956-83(2010) Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)

E957-03(2011)e1 Standard Terminology Relating to Geothermal Energy

E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers

E959-83(2010) Standard Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment

E960-93(2008) Standard Specification for Laboratory Glass Beakers

E961-97(2008) Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable

E963-95(2010) Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte

E964-06(2010) Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems

E965-96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

E966-10e1 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements

E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers

E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters

E969-02(2012) Standard Specification for Glass Volumetric (Transfer) Pipets

E970-10 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

E971-11 Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation

E972-96(2007) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight

E973-10 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell

E974-00(2006) Standard Guide for Specifying Thermal Performance of Geothermal Power Systems

E975-13 Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation

E976-10 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response

E977-05(2010) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials

E979-09 Standard Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids

E981-04(2012) Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals

E982-94(2009) Standard Specification for Laboratory Glass Test Tubes

E983-10 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy

E984-12 Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy

E985-00(2006) Standard Specification for Permanent Metal Railing Systems and Rails for Buildings

E986-04(2010) Standard Practice for Scanning Electron Microscope Beam Size Characterization

E987-88(2009) Standard Test Methods for Deglazing Force of Fenestration Products

E989-06(2012) Standard Classification for Determination of Impact Insulation Class (IIC)

E990-09 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels

E991-11 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method

E995-11 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy

E996-10 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy

E997-12 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods

E998-12 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method

E999-10 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing

E1000-98(2009) Standard Guide for Radioscopy

E1001-11 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves

E1002-11 Standard Practice for Leaks Using Ultrasonics

E1003-13 Standard Practice for Hydrostatic Leak Testing

E1004-09 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method

E1005-10 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)

E1006-13 Standard Practice for Analysis and Interpretation of Physics Dosimetry Results from Test Reactor Experiments

E1007-13 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures

E1008-03(2009) Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications

E1009-95(2006) Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel

E1010-09 Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting

E1012-12e1 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

E1012-RUS-12e1 Стандартная методика проверки центровки испытательных стендов и образцов при приложении к ним осевых растягивающих и сжимающих усилий

E1014-12 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels

E1016-07(2012)e1 Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers

E1018-09(2013) Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E706 (IIB)

E1019-11 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques

E1020-13 Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation

E1021-12 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices

E1022-94(2013) Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks

E1023-84(2007) Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses

E1025-11 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology

E1026-13 Standard Practice for Using the Fricke Dosimetry System

E1030-05(2011) Standard Test Method for Radiographic Examination of Metallic Castings

E1032-12 Standard Test Method for Radiographic Examination of Weldments

E1033-09 Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature

E1034-95(2013) Standard Specification for Nuclear Facility Transient Worker Records

E1035-13 Standard Practice for Determining Neutron Exposures for Nuclear Reactor Vessel Support Structures

E1036-12 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells

E1037-84(2009) Standard Test Method for Measuring Particle Size Distribution of RDF-5

E1038-10 Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls

E1040-10 Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells

E1042-02(2008)e1 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray

E1043-00(2010) Standard Specification for Pipets, Milk and Cream Examination

E1044-96(2011) Standard Specification for Glass Serological Pipets (General Purpose and Kahn)

E1045-00(2010) Standard Specification for Pipet, Sahli Hemoglobin

E1046-85(2010) Standard Specification for Glass Westergren Tube, Disposable

E1047-85(2010) Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable

E1048-88(2010) Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants

E1049-85(2011)e1 Standard Practices for Cycle Counting in Fatigue Analysis

E1050-12 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System

E1052-11 Standard Test Method to Assess the Activity of Microbicides against Viruses in Suspension

E1053-11 Standard Test Method to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces

E1054-08(2013) Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents

E1056-85(2007) Standard Practice for Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings

E1057-06(2010) Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems

E1061-01(2007) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers

E1064-12 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration

E1064-RUS-12 Стандартный метод определения содержания воды в органических жидкостях с помощью кулонометрического титрования по методу Карла Фишера

E1065-08 Standard Guide for Evaluating Characteristics of Ultrasonic Search Units

E1066/E1066M-12 Standard Practice for Ammonia Colorimetric LeakTesting

E1067/E1067M-11 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

E1068-85(2009) Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid

E1069-85(2009) Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress

E1070-11 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry

E1074-09 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems

E1077-01(2005) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens

E1077-RUS-01(2005) Стандартные методы оценки глубины обезуглероживания стальных образцов

E1078-09 Standard Guide for Specimen Preparation and Mounting in Surface Analysis

E1079-10 Standard Practice for Calibration of Transmission Densitometers

E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness

E1083-00(2011) Standard Test Method for Sensory Evaluation of Red Pepper Heat

E1084-86(2009) Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight

E1085-09 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry

E1086-08 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique

E1089-86(2007) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference

E1090-08 Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins

E1091-08 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels

E1092-91(2010) Standard Specification for Glass Micro Folin Pipet, Disposable

E1093-91(2012) Standard Specification for Glass Prothrombin Pipet, Disposable

E1094-04(2009) Standard Specification for Pharmaceutical Glass Graduates

E1095-99(2010) Standard Specification for Common Laboratory Glass Funnels

E1096-86(2011) Standard Specification for Laboratory Glass Separatory Funnels

E1097-12 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

E1102-91(2009) Standard Terminology Relating to Agricultural Chemical Application

E1104-98(2009) Standard Specification for Clinical Thermometer Probe Covers and Sheaths

E1105-00(2008) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

E1106-12 Standard Test Method for Primary Calibration of Acoustic Emission Sensors

E1107-10 Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations

E1108-86(2009) Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device

E1109-86(2009) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions

E1110-06(2011) Standard Classification for Determination of Articulation Class

E1111-07 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components

E1112-00(2011) Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature

E1114-09e1 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources

E1115-11 Standard Test Method for Evaluation of Surgical Hand Scrub Formulations

E1116-98(2008) Standard Test Method for Emulsification Characteristics of Pesticide Emulsifiable Concentrates

E1118/E1118M-11 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)

E1119-09 Standard Specification for Industrial Grade Ethylene Glycol

E1120-08 Standard Specification for Liquid Chlorine

E1121-12 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems

E1123-86(2009) Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials

E1124-10 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method

E1125-10 Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum

E1127-08 Standard Guide for Depth Profiling in Auger Electron Spectroscopy

E1129/E1129M-08e1 Standard Specification for Thermocouple Connectors

E1130-08 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index

E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry

E1131-RUS-08 Стандартный метод анализа состава вещества с помощью термогравиметрии

E1132-13 Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica

E1133-86(2010) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements

E1135-12 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants

E1136-10 Standard Specification for P195/75R14 Radial Standard Reference Test Tire

E1136-RUS-10 Стандартная спецификация на эталонную радиальную шину P195/75R14 для испытаний

E1137/E1137M-08 Standard Specification for Industrial Platinum Resistance Thermometers

E1139/E1139M-12 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

E1140-95(2010)e1 Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography

E1142-13 Standard Terminology Relating to Thermophysical Properties

E1143-05(2010) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter

E1146-08 Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)

E1151-93(2011) Standard Practice for Ion Chromatography Terms and Relationships

E1153-03(2010)e1 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate Non-Food Contact Surfaces

E1154-89(2008) Standard Specification for Piston or Plunger Operated Volumetric Apparatus

E1155-96(2008) Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers

E1155M-96(2008) Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]

E1157-87(2011) Standard Specification for Sampling and Testing of Reusable Laboratory Glassware

E1158-09 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material

E1159-98(2009) Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum

E1160-87(2007) Standard Guide for On-Site Inspection and Verification of Operation of Solar Domestic Hot Water Systems

E1161-09 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components

E1162-11 Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)

E1163-10 Standard Test Method for Estimating Acute Oral Toxicity in Rats

E1164-12 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation

E1165-12 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging

E1166-00(2009) Standard Guide for Network Level Pavement Management

E1167-87(2008) Standard Guide for Radiation Protection Program for Decommissioning Operations

E1168-95(2013) Standard Guide for Radiological Protection Training for Nuclear Facility Workers

E1169-13a Standard Practice for Conducting Ruggedness Tests

E1170-97(2012) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

E1171-09 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments

E1172-87(2011) Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer

E1173-01(2009) Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations

E1174-13 Standard Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations

E1175-87(2009) Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere

E1177-09 Standard Specification for Engine Coolant Grade Ethylene Glycol

E1178-08 Standard Test Methods for Analysis of Acrylonitrile

E1179-11 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems

E1180-08 Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation

E1181-02(2008) Standard Test Methods for Characterizing Duplex Grain Sizes

E1181-RUS-02(2008) СТАНДАРТНЫЕ МЕТОДЫ ИСПЫТАНИЙ, ХАРАКТЕРИЗУЮЩИЕ РАЗМЕРЫ СДВОЕННЫХ ЗЕРЕН

E1184-10 Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry

E1185-12 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems

E1186-03(2009) Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems

E1188-11 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator

E1189-00(2010) Standard Specification for Micro-Burets (Koch Style)

E1190-11 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members

E1191-03a(2008) Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids

E1192-97(2008) Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians

E1193-97(2012) Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests

E1197-12 Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test

E1198-87(2012) Standard Practice for Sampling Zooplankton with Pumps

E1199-87(2012) Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler

E1200-87(2012) Standard Practice for Preserving Zooplankton Samples

E1201-87(2012) Standard Practice for Sampling Zooplankton with Conical Tow Nets

E1202-87(2008) Standard Guide for Development of Micronucleus Assay Standards

E1207-09 Standard Practice for The Sensory Evaluation of Axillary Deodorancy

E1208-10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process

E1209-10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

E1210-10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process

E1211/E1211M-12 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors

E1212-12 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies

E1213-97(2009) Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems

E1214-11 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE)

E1215-93(2012) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

E1216-11 Standard Practice for Sampling for Particulate Contamination by Tape Lift

E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers

E1218-04(2012) Standard Guide for Conducting Static Toxicity Tests with Microalgae

E1219-10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

E1220-10 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process

E1221-12a Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels

E1222-90(2009) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems

E1225-09 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique

E1226-12a Standard Test Method for Explosibility of Dust Clouds

E1228-09 Standard Test Method for Assay of Peroxy Esters-Catalyzed Iodometric Procedure

E1229-08 Standard Specification for Calcium Hypochlorite

E1231-10 Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials

E1232-07 Standard Test Method for Temperature Limit of Flammability of Chemicals

E1233-06 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential

E1234-12 Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft

E1235-12 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft

E1237-93(2009) Standard Guide for Installing Bonded Resistance Strain Gages

E1239-04(2010) Standard Practice for Description of Reservation/Registration-Admission, Discharge, Transfer (R-ADT) Systems for Electronic Health Record (EHR) Systems

E1241-05(2013) Standard Guide for Conducting Early Life-Stage Toxicity Tests with Fishes

E1242-97(2008) Standard Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis

E1245-03(2008) Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis

E1247-12 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry

E1248-90(2009) Standard Practice for Shredder Explosion Protection

E1249-10 Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources

E1250-10 Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices

E1251-11 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis

E1253-13 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens

E1254-08 Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

E1255-09 Standard Practice for Radioscopy

E1256-11a Standard Test Methods for Radiation Thermometers (Single Waveband Type)

E1257-93(2008) Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis

E1258-88(2012) Standard Test Method for Airflow Calibration of Fan Pressurization Devices

E1259-10 Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C

E1260-03(2009) Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments

E1262-88(2008) Standard Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay

E1263-97(2008) Standard Guide for Conduct of Micronucleus Assays in Mammalian Bone Marrow Erythrocytes

E1264-08e1 Standard Classification for Acoustical Ceiling Products

E1265-04(2013) Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers

E1266-12 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications

E1268-01(2007) Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures

E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry

E1270-88(2008) Standard Test Method for Equal Arm Balances

E1272-02(2012) Standard Specification for Laboratory Glass Graduated Cylinders

E1273-88(2008) Standard Specification for Color Coding of Reusable Laboratory Pipets

E1274-03(2012) Standard Test Method for Measuring Pavement Roughness Using a Profilograph

E1277-08 Standard Test Method for Chemical Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry

E1280-97(2008) Standard Guide for Performing the Mouse Lymphoma Assay for Mammalian Cell Mutagenicity

E1281-10 Standard Guide for Nuclear Facility Decommissioning Plans

E1282-11 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

E1285-06 Standard Guide for Identification of Bacteriophage Lambda (λ) or Its DNA

E1286-00(2006) Standard Guide for Identification of Herpes Simplex Virus or Its DNA

E1289-08 Standard Specification for Reference Specimen for Sound Transmission Loss

E1292-94(2011) Standard Specification for Gravity Convection and Forced Ventilation Incubators

E1293-02(2012) Standard Specification for Glass Measuring Pipets

E1295-01(2013) Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with Ceriodaphnia dubia

E1297-08(2013) Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium

E1298-06 Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products

E1299-96(2010) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature

E1300-12ae1 Standard Practice for Determining Load Resistance of Glass in Buildings

E1302-13 Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids

E1303-95(2010) Practice for Refractive Index Detectors Used in Liquid Chromatography

E1304-97(2008)e1 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials

E1306-11 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition

E1307-10 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels

E1309-00(2011) Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases

E1311-89(2010) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems

E1312-09(2013)e1 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature

E1316-13c Standard Terminology for Nondestructive Examinations

E1317-12 Standard Test Method for Flammability of Marine Surface Finishes

E1318-09 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods

E1319-98(2009) Standard Guide for High-Temperature Static Strain Measurement

E1320-10 Standard Reference Radiographs for Titanium Castings

E1321-09 Standard Test Method for Determining Material Ignition and Flame Spread Properties

E1323-09 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data

E1324-11 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

E1325-02(2008) Standard Terminology Relating to Design of Experiments

E1326-08 Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria

E1327-07(2012)e1 Standard Test Method for Evaluation of Antimicrobial Handwash Formulations by Utilizing Fingernail Regions

E1329-10 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis

E1329-RUS-10 Стандартное практическое руководство по поверке и применению контрольных карт при спектрохимическом анализе

E1331-09 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry

E1332-10a Standard Classification for Rating Outdoor-Indoor Sound Attenuation

E1333-10 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

E1334-95(2012) Standard Practice for Rating the Serviceability of a Building or Building-Related Facility

E1335-08 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

E1336-11 Standard Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry

E1337-90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire

E1338-09 Guide for Identification of Metals and Alloys in Computerized Material Property Databases

E1340-05(2010) Standard Guide for Rapid Prototyping of Information Systems

E1341-06(2011)e1 Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry

E1345-98(2008)e1 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements

E1346-90(2010) Standard Practice for Bulk Sampling, Handling, and Preparing Edible Vegetable Oils for Sensory Evaluation

E1347-06(2011) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

E1348-11 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry

E1349-06(2013) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry

E1350-13 Standard Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service

E1351-01(2012) Standard Practice for Production and Evaluation of Field Metallographic Replicas

E1352-08a Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies

E1353-08ae1 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture

E1354-13 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

E1355-12 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models

E1356-08 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry

E1358-97(2013) Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven

E1359-12 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies

E1360-05(2010) Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System

E1361-02(2007) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis

E1362-10 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells

E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers

E1364-95(2012) Standard Test Method for Measuring Road Roughness by Static Level Method

E1366-11 Standard Practice for Standardized Aquatic Microcosms: Fresh Water

E1367-03(2008) Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates

E1368-11 Standard Practice for Visual Inspection of Asbestos Abatement Projects

E1369-11 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems

E1370-96(2008) Standard Guide for Air Sampling Strategies for Worker and Workplace Protection

E1374-06(2011) Standard Guide for Open Office Acoustics and Applicable ASTM Standards

E1377-99(2010) Standard Specification for Laboratory Glass Kjeldahl Flasks

E1378-99(2010) Standard Specification for Laboratory Glass Multiple Neck Distilling/Boiling Flasks

E1379-90(2010) Standard Specification for Laboratory Glass Dewar Flask

E1380-90(2010) Standard Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposable Micropipets

E1382-97(2010) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis

E1382-RUS-97(2010) Стандартные методы испытания для определения среднего размера зерна с использованием полуавтоматического и автоматического анализа изображений

E1384-07(2013) Standard Practice for Content and Structure of the Electronic Health Record (EHR)

E1386-10 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction

E1388-12 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples

E1390-12 Standard Specification for Illuminators Used for Viewing Industrial Radiographs

E1391-03(2008) Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates

E1395-90(2011) Standard Test Method for Sensory Evaluation of Low Heat Chilies

E1396-90(2011) Standard Test Method for Sensory Evaluation of Oleoresin Capsicum

E1397-91(2008) Standard Practice for In Vitro Rat Hepatocyte DNA Repair Assay

E1398-91(2008) Standard Practice for In Vivo Rat Hepatocyte DNA Repair Assay

E1399-97(2009) Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

E1402-08e1 Standard Terminology Relating to Sampling

E1403-97(2008) Standard Specification for Laboratory Glass Boiling Flasks

E1404-94(2008) Standard Specification for Laboratory Glass Conical Flasks

E1405-98(2010) Standard Specification for Laboratory Glass Distillation Flasks

E1406-95(2010) Standard Specification for Laboratory Glass Filter Flasks

E1409-08 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique

E1409-RUS-08 Стандартный метод испытания для определения содержания кислорода и азота в титане и титановых сплавах с использованием методики плавления в инертном газе

E1410-91(2005) Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings

E1411-09 Standard Practice for Qualification of Radioscopic Systems

E1412-12 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal

E1413-07 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration

E1414/E1414M-11a Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

E1415-91(2012) Standard Guide for Conducting Static Toxicity Tests With Lemna gibba G3

E1416-09 Standard Test Method for Radioscopic Examination of Weldments

E1417/E1417M-13 Standard Practice for Liquid Penetrant Testing

E1418-10 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process

E1419-09 Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission

E1421-99(2009) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests

E1422-05 Standard Guide for Test Methods for Forensic Writing Ink Comparison

E1423-06 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

E1424-91(2008) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen

E1425-07 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

E1426-98(2009)e1 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress

E1428-99(2009) Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism)

E1432-04(2011) Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size

E1434-00(2013) Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases

E1438-11 Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS

E1439-12 Standard Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX)

E1440-91(2012) Standard Guide for Acute Toxicity Test with the Rotifer Brachionus

E1441-11 Standard Guide for Computed Tomography (CT) Imaging

E1444/E1444M-12 Standard Practice for Magnetic Particle Testing

E1445-08 Standard Terminology Relating to Hazard Potential of Chemicals

E1446-05 Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Emission Spectrometry

E1447-09 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

E1448/E1448M-09 Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

E1449-92(2011) Standard Guide for Supercritical Fluid Chromatography Terms and Relationships

E1450-09 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

E1453-09 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

E1455-03(2010) Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters

E1456-08 Standard Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid)

E1457-13 Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals

E1458-12 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles

E1459-13 Standard Guide for Physical Evidence Labeling and Related Documentation

E1461-11 Standard Test Method for Thermal Diffusivity by the Flash Method

E1462-12 Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules

E1463-92(2012) Standard Guide for Conducting Static and Flow-Through Acute Toxicity Tests With Mysids From the West Coast of the United States

E1464-92(2005) Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities

E1465-08a Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings

E1470-92(2006) Standard Test Method for Characterization of Proteins by Electrophoretic Mobility

E1471-92(2008) Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases

E1473-09 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

E1474-10 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter

E1475-13 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

E1476-04(2010) Standard Guide for Metals Identification, Grade Verification, and Sorting

E1477-98a(2013) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers

E1478-97(2009) Standard Practice for Visual Color Evaluation of Transparent Sheet Materials

E1479-99(2011) Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers

E1480-92(2013) Standard Terminology of Facility Management (Building-Related)

E1481-00a(2008) Standard Terminology of Railing Systems and Rails for Buildings

E1482-12 Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization

E1486-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria

E1486M-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]

E1488-12e1 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods

E1489-08 Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device

E1490-11 Standard Guide for Two Sensory Descriptive Analysis Approaches for Skin Creams and Lotions

E1491-06(2012) Standard Test Method for Minimum Autoignition Temperature of Dust Clouds

E1492-11 Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory

E1493-06 Standard Guide for Identification of Bacteriophage M13 or Its DNA

E1494-12 Standard Practice for Encapsulation Testing of Friable Asbestos-Containing Surfacing Materials

E1495/E1495M-12 Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints

E1497-05(2011) Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids

E1498-92(2012) Standard Guide for Conducting Sexual Reproduction Tests with Seaweeds

E1499-97(2009) Standard Guide for Selection, Evaluation, and Training of Observers

E1502-10 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures

E1503-12 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System

E1504-11 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)

E1506-08 Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar)

E1508-12a Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy

E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type

E1510-95(2013)e1 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs

E1511-93(2010) Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography

E1512-01(2007) Standard Test Methods for Testing Bond Performance of Bonded Anchors

E1513-93(2011) Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)

E1514-98(2011) Standard Specification for Structural Standing Seam Steel Roof Panel Systems

E1515-07 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts

E1517-13 Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova

E1518-05(2012) Standard Practice for Evaluation of Physical Compatibility of Pesticides in Aqueous Tank Mixtures by the Dynamic Shaker Method

E1519-10 Standard Terminology Relating to Agricultural Tank Mix Adjuvants

E1520-99(2009) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations

E1521-01(2006) Standard Test Method for Liquid Holding Capacity of Granular Carriers

E1522-93(2008) Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware

E1523-09 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy

E1525-02(2008) Standard Guide for Designing Biological Tests with Sediments

E1527-05 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process

E1527-CH-05 适用于 环境现场评估的标准惯例:第一阶段环境现场评估流程

E1528-06 Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process

E1528-CH-06 适用于有限环境尽职调查的标准惯例:交易甄别流程

E1529-13 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies

E1530-11 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique

E1531-00(2006) Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Growth on Agarose Medium

E1532-00(2006) Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Use of Bisbenzamide DNA-Binding Fluorochrome

E1533-00(2006) Standard Practice for Indirect Detection of Mycoplasma in Cell Culture by 4`-6-Diamidino-2-2 Phenylindole (DAPI) Staining

E1534-93(2006) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels

E1536-00(2006) Standard Practice for Detection of Mycoplasma Contamination of Bovine Serum by Large Volume Method

E1537-13 Standard Test Method for Fire Testing of Upholstered Furniture

E1542-10 Standard Terminology Relating to Occupational Health and Safety

E1543-00(2011) Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems

E1545-11 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis

E1546-09a Standard Guide for Development of Fire-Hazard-Assessment Standards

E1547-09 Standard Terminology Relating to Industrial and Specialty Chemicals

E1548-09 Standard Practice for Preparation of Aerospace Contamination Control Plans

E1549/E1549M-13 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations

E1551-08 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment

E1552-08 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry

E1554/E1554M-13 Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization

E1555-12 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair

E1556-12 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair

E1557-09 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II

E1558-09 Standard Guide for Electrolytic Polishing of Metallographic Specimens

E1559-09 Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials

E1560-11e1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers

E1561-93(2009) Standard Practice for Analysis of Strain Gage Rosette Data

E1562-00(2013) Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids

E1563-98(2012) Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos

E1564-00(2006) Standard Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials

E1565-00(2006) Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures

E1566-00(2006) Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen

E1568-13 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

E1569-09 Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique

E1570-11 Standard Practice for Computed Tomographic (CT) Examination

E1571-11 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope

E1573-09 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels

E1574-98(2006) Standard Test Method for Measurement of Sound in Residential Spaces

E1575-12 Standard Practice for Pressure Water Cleaning and Cutting

E1577-11 Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis

E1578-06 Standard Guide for Laboratory Information Management Systems (LIMS)

E1582-10 Standard Practice for Calibration of Temperature Scale for Thermogravimetry

E1584-11 Standard Test Method for Assay of Nitric Acid

E1587-10 Standard Test Methods for Chemical Analysis of Refined Nickel

E1588-10e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry

E1589-05(2010) Standard Test Method for Evaluation of First Aid Antiseptic Drug Products

E1590-13 Standard Test Method for Fire Testing of Mattresses

E1591-13 Standard Guide for Obtaining Data for Fire Growth Models

E1592-05(2012) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

E1593-13 Standard Guide for Assessing the Efficacy of Air Care Products in Reducing the Perception of Indoor Malodor

E1594-11 Standard Guide for Expression of Temperature

E1597-10 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments

E1600-13 Standard Test Method for Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry

E1601-12 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

E1602-03(2010)e1 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters

E1603/E1603M-11 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode

E1604-12 Standard Guide for Behavioral Testing in Aquatic Toxicology

E1605-04(2012) Standard Terminology Relating to Lead in Buildings

E1606-09 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes

E1606-RUS-09 Стандартная методика электромагнитного (вихретокового) исследования медного стержня повторной протяжки для использования в электротехнике

E1610-02(2008) Standard Guide for Forensic Paint Analysis and Comparison

E1611-00(2013) Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids

E1612-94(2009) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures

E1613-12 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

E1614-94(2013) Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems

E1615-08 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method

E1616-08 Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography

E1617-09 Standard Practice for Reporting Particle Size Characterization Data

E1618-11 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry

E1619-11 Standard Test Method for Chronic Oral Toxicity Study in Rats

E1620-97(2012) Standard Terminology Relating to Liquid Particles and Atomization

E1621-05 Standard Guide for X-Ray Emission Spectrometric Analysis

E1623-11 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)

E1627-11 Standard Practice for Sensory Evaluation of Edible Oils and Fats

E1628-94(2008) Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration

E1629-12 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes

E1633-08a(2013) Standard Specification for Coded Values Used in the Electronic Health Record

E1634-11 Standard Guide for Performing Sputter Crater Depth Measurements

E1635-06(2011) Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)

E1636-10 Standard Practice for Analytically Describing Depth-Profile and Linescan-Profile Data by an Extended Logistic Function

E1637-98(2011) Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems

E1638-13 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media

E1640-09 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis

E1640-RUS-09 Стандартный метод определения температуры стеклования с помощью динамического механического анализа

E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry

E1642-00(2010) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis

E1643-11 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

E1644-04(2012)e1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

E1645-01(2007) Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

E1646-95(2011) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference

E1647-09 Standard Practice for Determining Contrast Sensitivity in Radioscopy

E1648-95(2011) Standard Reference Radiographs for Examination of Aluminum Fusion Welds

E1652-10 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples

E1653-94(2013) Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides

E1654-94(2013) Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy

E1655-05(2012) Standard Practices for Infrared Multivariate Quantitative Analysis

E1656/E1656M-11 Standard Guide for Classification of Automated Pavement Condition Survey Equipment

E1657-98(2011) Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography

E1658-08 Standard Terminology for Expressing Conclusions of Forensic Document Examiners

E1659-12 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet

E1660-95a(2012) Standard Classification for Serviceability of an Office Facility for Support for Office Work

E1661-95a(2012) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness

E1662-95a(2012) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment

E1663-03(2010) Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology

E1664-95a(2012) Standard Classification for Serviceability of an Office Facility for Layout and Building Factors

E1665-95a(2012) Standard Classification for Serviceability of an Office Facility for Facility Protection

E1666-95a(2012) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions

E1667-95a(2012) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants

E1668-95a(2012) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff

E1669-95a(2012) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding

E1670-95a(2012) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance

E1671-95a(2012) Standard Classification for Serviceability of an Office Facility for Cleanliness

E1672-12 Standard Guide for Computed Tomography (CT) System Selection

E1673-96(2012) Standard Test Method for Percent Suspensibility

E1675-04(2012) Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis

E1676-12 Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida and the Enchytraeid Potworm Enchytraeus albidus

E1677-11 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls

E1678-10 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis

E1679-95(2012) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility

E1680-11 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems

E1681-03(2008)e2 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

E1682-08 Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit

E1683-02(2007) Standard Practice for Testing the Performance of Scanning Raman Spectrometers

E1684-10 Standard Specification for Miniature Thermocouple Connectors

E1685-00(2006) Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique

E1686-10 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria

E1687-10 Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids

E1688-10 Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates

E1689-95(2008) Standard Guide for Developing Conceptual Site Models for Contaminated Sites

E1690-08 Standard Test Method for Determination of Ethanol Extractives in Biomass

E1692-95a(2012) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants

E1693-95(2012) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets

E1694-95a(2012) Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies

E1695-95(2013) Standard Test Method for Measurement of Computed Tomography (CT) System Performance

E1697-05(2012)e1 Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes

E1698-95(2010) Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography

E1699-10 Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems and Other Constructed Projects

E1700-95(2005) Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope

E1701-95(2012) Standard Classification for Serviceability of an Office Facility for Manageability

E1703/E1703M-10 Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

E1704-95(2010) Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures

E1705-11 Standard Terminology Relating to Biotechnology

E1706-05(2010) Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates

E1708-95(2007) Standard Practice for Electronic Interchange of Color and Appearance Data

E1709-09 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle

E1710-11 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer

E1711-12 Standard Guide for Measurement of Behavior During Fish Toxicity Tests

E1714-07(2013) Standard Guide for Properties of a Universal Healthcare Identifier (UHID)

E1715-01(2013) Standard Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record Systems

E1719-12 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry

E1721-01(2009) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass

E1725-08 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components

E1726-01(2009) Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis

E1727-05 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination

E1728-10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

E1729-05 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination

E1730-09 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores

E1731-11 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves

E1732-12 Standard Terminology Relating to Forensic Science

E1733-95(2008) Standard Guide for Use of Lighting in Laboratory Testing

E1734-09 Standard Practice for Radioscopic Examination of Castings

E1735-07 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV

E1736-10 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels

E1739-95(2010)e1 Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites

E1740-10 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter

E1742/E1742M-12 Standard Practice for Radiographic Examination

E1744-04(2010) Standard Practice for View of Emergency Medical Care in the Electronic Health Record

E1745-11 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

E1746-08 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities

E1747-95(2011) Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications

E1748-95(2009) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System

E1749-10 Standard Terminology Relating to Rigid Wall Relocatable Shelters

E1750-10 Standard Guide for Use of Water Triple Point Cells

E1751/E1751M-09e1 Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations

E1753-13 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films

E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry

E1755-01(2007) Standard Test Method for Ash in Biomass

E1756-08 Standard Test Method for Determination of Total Solids in Biomass

E1757-01(2007) Standard Practice for Preparation of Biomass for Compositional Analysis

E1758-01(2007) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography

E1760-09 Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity

E1762-95(2013) Standard Guide for Electronic Authentication of Health Care Information

E1763-06 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods

E1765-11 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems

E1766-95(2007) Standard Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices

E1767-11 Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials

E1768-95(2013) Standard Guide for Ventilatory Behavioral Toxicology Testing of Freshwater Fish

E1770-95(2006) Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment

E1771-07 Standard Test Method for Determination of Copper in Anode and Blister Copper

E1773-10 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

E1774-12 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)

E1775-07 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead

E1776-13 Standard Guide for Development of Fire-Risk-Assessment Standards

E1777-09 Standard Guide for Prioritization of Data Needs for Pavement Management

E1778-98a(2008) Standard Terminology Relating to Pavement Distress

E1780-12 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source

E1781/E1781M-13 Standard Practice for Secondary Calibration of Acoustic Emission Sensors

E1782-08 Standard Test Method for Determining Vapor Pressure by Thermal Analysis

E1783-96(2009) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures

E1784-08 Standard Test Method for Total Peroxides in Acrylonitrile

E1786-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry

E1787-08 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography

E1788-08 Standard Test Method for Acidity in Acrylonitrile

E1790-04(2010) Standard Practice for Near Infrared Qualitative Analysis

E1791-96(2008)e1 Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry

E1792-03(2011) Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

E1793-11 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters

E1794-08 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels

E1795-12 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

E1796-03(2011)e1 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings

E1797-12 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

E1799-12 Standard Practice for Visual Inspections of Photovoltaic Modules

E1800-08 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels

E1801-09 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters

E1802-12 Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules

E1803-06 Standard Test Methods for Determining Structural Capacities of Insulated Panels

E1804-12 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project

E1805-13 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry

E1806-09 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition

E1806-RUS-09 Стандартное практическое руководство по взятию проб стали и чугуна для определения химического состава

E1808-96(2009) Standard Guide for Designing and Conducting Visual Experiments

E1810-12 Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish

E1813-96(2007) Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy

E1814-96(2007) Standard Practice for Computed Tomographic (CT) Examination of Castings

E1815-08(2013)e1 Standard Test Method for Classification of Film Systems for Industrial Radiography

E1816-12 Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

E1817-08 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

E1819-10 Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities

E1820-11e2 Standard Test Method for Measurement of Fracture Toughness

E1821-08 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography

E1822-13 Standard Test Method for Fire Testing of Stacked Chairs

E1823-13 Standard Terminology Relating to Fatigue and Fracture Testing

E1824-09e1 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method

E1825-06(2012) Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems

E1826-12 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded

E1827-11 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door

E1829-09 Standard Guide for Handling Specimens Prior to Surface Analysis

E1830-09 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules

E1832-08(2012) Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer

E1833-07a Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition

E1834-11 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry

E1835-09 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry

E1836/E1836M-09e1 Standard Practice for Building Floor Area Measurements for Facility Management

E1837-96(2007) Standard Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated Use Test)

E1838-10 Standard Test Method for Determining the Virus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults

E1839-13 Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime

E1840-96(2007) Standard Guide for Raman Shift Standards for Spectrometer Calibration

E1841-04(2012) Standard Guide for Conducting Renewal Phytotoxicity Tests With Freshwater Emergent Macrophytes

E1843-96(2010) Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection

E1844-08 Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire

E1845-09 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth

E1847-96(2013) Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines

E1848-96(2008) Standard Guide for Selecting and Using Ecological Endpoints for Contaminated Sites

E1849-96(2013) Standard Guide for Fish and Wildlife Incident Monitoring and Reporting

E1850-04(2012) Standard Guide for Selection of Resident Species as Test Organisms for Aquatic and Sediment Toxicity Tests

E1851-09 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures

E1852-08 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry

E1854-13 Standard Practice for Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts

E1855-10 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors

E1856-97(2008) Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines

E1857-97(2013)e1 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces

E1858-08 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry

E1859/E1859M-11 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

E1860-07 Standard Test Method for Elapsed Time Calibration Thermal Analyzers

E1862-97(2010) Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers

E1863-07 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography

E1865-97(2013) Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air

E1866-97(2013) Standard Guide for Establishing Spectrophotometer Performance Tests

E1867-13 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers

E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry

E1869-04(2010) Standard Guide for Confidentiality, Privacy, Access, and Data Security Principles for Health Information Including Electronic Health Records

E1870-11 Standard Test Method for Odor and Taste Transfer from Polymeric Packaging Film

E1871-10 Standard Guide for Serving Protocol for Sensory Evaluation of Foods and Beverages

E1873-06 Standard Guide for Detection of Nucleic Acid Sequences by the Polymerase Chain Reaction Technique

E1874-09 Standard Test Method for Recovery of Microorganisms from Skin using the Cup Scrub Technique

E1875-08 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

E1876-09 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration

E1877-11 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data

E1878-97(2008) Standard Specification for Laboratory Glass Volumetric Flasks, Special Use

E1879-00(2010) Standard Guide for Sensory Evaluation of Beverages Containing Alcohol

E1880-12 Standard Practice for Tissue Cryosection Analysis with SIMS

E1881-12 Standard Guide for Cell Culture Analysis with SIMS

E1882-10 Standard Test Method for Evaluation of Antimicrobial Formulations by the Agar Patch Technique

E1883-02(2007) Standard Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique

E1885-04(2011) Standard Test Method for Sensory Analysis - Triangle Test

E1886-05 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

E1888/E1888M-12 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores

E1889-97(2009) Standard Guide for Pavement Management Implementation

E1890-11 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment

E1891-10a Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient

E1892-09 Standard Guide for Preparing Characterization Plans for Decommissioning Nuclear Facilities

E1893-08a Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls

E1894-13 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources

E1897-97(2010) Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers

E1898-13 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

E1899-08 Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide

E1901-08 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

E1903-11 Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process

E1903-CH-11 适用于环保场所评估的标准惯例:第二阶段的环境场地评估流程

E1908-10 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

E1909-11 Standard Guide for Time-Intensity Evaluation of Sensory Attributes

E1910/E1910M-04(2009) Test Method for Agricultural pH Control Agents

E1911-09ae1 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester

E1914-07 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis

E1915-11 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

E1916-11 Standard Guide for Identification of Mixed Lots of Metals

E1917-08 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Molecular Absorption Spectrometry

E1918-06 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field

E1919-09 Standard Guide for Worldwide Published Standards Relating to Particle and Spray Characterization

E1920-03(2008) Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings

E1921-13 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

E1922-04(2010)e1 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials

E1925-10 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures

E1926-08 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

E1927-98(2012) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings

E1928-07 Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing

E1930/E1930M-12 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

E1931-09 Standard Guide for X-Ray Compton Scatter Tomography

E1932-12 Standard Guide for Acoustic Emission Examination of Small Parts

E1933-99a(2010) Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers

E1934-99a(2010) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

E1935-97(2013) Standard Test Method for Calibrating and Measuring CT Density

E1936-03(2011) Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems

E1938-08 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometry

E1941-10 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

E1942-98(2010)e1 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing

E1943-98(2010) Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites

E1944-98(2013) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests

E1945-02(2008) Standard Test Method for Percent Dispersibility

E1946-12 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects

E1947-98(2009) Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data

E1948-98(2009) Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data

E1949-03(2009) Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages

E1950-10 Standard Practice for Reporting Results from Methods of Chemical Analysis

E1951-02(2007) Standard Guide for Calibrating Reticles and Light Microscope Magnifications

E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry

E1953-07(2013) Standard Practice for Description of Thermal Analysis and Rheology Apparatus

E1954-05(2011) Standard Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)

E1955-04(2009) Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs

E1957-04(2010) Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers

E1958-12 Standard Guide for Sensory Claim Substantiation

E1959-05(2011) Standard Guide for Requests for Proposals Regarding Medical Transcription Services for Healthcare Institutions

E1960-07(2011) Standard Practice for Calculating International Friction Index of a Pavement Surface

E1961-11 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units

E1962-09 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

E1963-09 Standard Guide for Conducting Terrestrial Plant Toxicity Tests

E1965-98(2009) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature

E1966-07(2011) Standard Test Method for Fire-Resistive Joint Systems

E1967-11a Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope

E1968-11 Standard Guide for Microcrystal Testing in the Forensic Analysis of Cocaine

E1969-11 Standard Guide for Microcrystal Testing in the Forensic Analysis of Methamphetamine and Amphetamine

E1970-11 Standard Practice for Statistical Treatment of Thermoanalytical Data

E1971-05(2011) Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings

E1972-04(2011) Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment

E1974-11 Standard Specification for Shelter, Electrical Equipment S-250/G

E1975-09 Standard Specification for Shelter, Electrical, Equipment S-280/G

E1976-11 Standard Specification for Shelter, Tactical, Nonexpandable

E1977-11 Standard Specification for Shelter, Tactical, Expandable, One-Side

E1978-11 Standard Specification for Shelter, Tactical, Expandable, Two-Side

E1979-12 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead

E1980-11 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces

E1981-98(2012)e2 Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry

E1982-98(2013) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air

E1985-98(2013) Standard Guide for User Authentication and Authorization

E1986-09(2013) Standard Guide for Information Access Privileges to Health Information

E1990-98(2005) Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations

E1991-05 Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products

E1993/E1993M-98(2013)e1 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs

E1994-09(2013) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans

E1995-12 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally

E1996-12a Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

E1997-12 Standard Practice for the Selection of Spacecraft Materials

E1998-11 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances

E1999-11 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry

E2000-05 Standard Guide for Minimum Basic Education and Training of Individuals Involved in the Detection of Deception (PDD)

E2001-08 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts

E2002-98(2009) Standard Practice for Determining Total Image Unsharpness in Radiology

E2003-10 Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators

E2004-10 Standard Test Method for Facing Cleavage of Sandwich Panels

E2005-10 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields

E2006-10 Standard Guide for Benchmark Testing of Light Water Reactor Calculations

E2007-10 Standard Guide for Computed Radiography

E2008-08 Standard Test Method for Volatility Rate by Thermogravimetry

E2009-08 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry

E2011-13 Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand

E2012-06(2012) Standard Guide for the Preparation of a Binary Chemical Compatibility Chart

E2013-12 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study

E2014-11 Standard Guide on Metallographic Laboratory Safety

E2015-04(2009) Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination

E2016-11 Standard Specification for Industrial Woven Wire Cloth

E2017-99(2010) Standard Guide for Amendments to Health Information

E2018-08 Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process

E2019-03(2007) Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air

E2020-99a(2010) Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at Contaminated Sites

E2021-09 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers

E2022-11 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration

E2023-10 Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators

E2024/E2024M-11 Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector

E2025-99(2006) Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies

E2026-07 Standard Guide for Seismic Risk Assessment of Buildings

E2027-09 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials

E2028-99(2005) Standard Practice for Receiving, Testing and Reporting Results of Investigation of Metal, Ore, or Metal Related Samples that Are or May Be Involved in Litigation

E2029-11 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution

E2030-09a Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings

E2031-99(2010) Standard Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations

E2032-09 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119

E2033-99(2013) Standard Practice for Computed Radiology (Photostimulable Luminescence Method)

E2034-99(2012) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces

E2035-12 Standard Terminology Relating to Forensic Psychophysiology

E2036-07 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)

E2037-07 Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)

E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers

E2041-08e1 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method

E2042/E2042M-09 Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms

E2043-99(2012) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry

E2044-99(2012) Standard Test Method for Spreading of Liquid Agricultural Spray Mixtures

E2045-99(2009) Standard Practice for Detailed Clinical Observations of Test Animals

E2046-08 Standard Test Method for Reaction Induction Time by Thermal Analysis

E2047-10 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays

E2048-99(2006) Standard Guide for Detection of Nucleic Acids of the Mycobacterium Tuberculosis Complex and Other Pathogenic Mycobacteria by the Polymerase Chain Reaction Technique

E2049-12 Standard Guide for Quantitative Attribute Evaluation of Fragrance/Odors for Shampoos and Hair Conditioners by Trained Assessors

E2050-12a Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

E2056-04(2010) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures

E2057-10 Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations

E2058-13 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)

E2059-06(2010) Standard Practice for Application and Analysis of Nuclear Research Emulsions for Fast Neutron Dosimetry

E2060-06 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes

E2061-12 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles

E2062-11 Standard Guide for PDD Examination Standards of Practice

E2063-12 Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations

E2064-00(2006) Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD)

E2065-11 Standard Guide for Ethical Requirements for Psychophysiological Detection of Deception (PDD) Examiners

E2066-00(2007) Standard Guide for Validation of Laboratory Information Management Systems

E2067-12 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests

E2068-00(2008) Standard Test Method for Determination of Operating Force of Sliding Windows and Doors

E2069-06(2012) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters

E2070-08 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods

E2071-00(2010) Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data

E2072-10 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings

E2073-10 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings

E2075/E2075M-10 Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod

E2076/E2076M-10 Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission

E2077-00(2010) Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data

E2078-00(2010) Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data

E2079-07 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors

E2080-06 Standard Guide for Clinical Psychophysiological Detection of Deception (PDD) Examinations for Sex Offenders

E2081-00(2010)e1 Standard Guide for Risk-Based Corrective Action

E2082-12 Standard Guide for Descriptive Analysis of Shampoo Performance

E2083-05(2010) Standard Classification for Building Construction Field Requirements, and Office Overhead Profit

E2088-06(2011) Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments

E2089-00(2006) Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications

E2090-12 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy

E2091-11 Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls

E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis

E2093-12 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

E2096/E2096M-10 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing

E2097-00(2006) Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products

E2098-00(2006) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution

E2099-00(2007) Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems

E2100-04(2010) Standard Practice for Calculating the International Runway Friction Index

E2101-00(2005) Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer

E2102-13 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater

E2103/E2103M-13 Standard Classification for Bridge Elements—UNIFORMAT II

E2104-09 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components

E2105-00(2010) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)

E2105-RUS-00(2010) Стандартная общая методика термогравиметрического анализа (ТГА), совмещенного с инфракрасным анализом (ТГА/ИК)

E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses

E2107-06 Standard Practice for Environmental Regulatory Compliance Audits

E2108-10 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer

E2109-01(2007) Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings

E2110-11 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)

E2111-12 Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals

E2112-07 Standard Practice for Installation of Exterior Windows, Doors and Skylights

E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers

E2114-08 Standard Terminology for Sustainability Relative to the Performance of Buildings

E2115-06 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities

E2117-06(2011) Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription

E2120-10 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films

E2121-13 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings

E2122-02(2013) Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves

E2123-10 Standard Practice for the Transmittal of Evidence in Sexual Assault Investigation

E2124-10 Standard Practice for the Specification for Equipment and Supplies in Sexual Assault Investigations

E2125-11 Standard Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues

E2126-11 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings

E2127-01a(2007) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction

E2128-12 Standard Guide for Evaluating Water Leakage of Building Walls

E2129-10 Standard Practice for Data Collection for Sustainability Assessment of Building Products

E2131-09 Standard Practice For Addressing and Reporting Loss, Damage, or Destruction of Tangible Property

E2132-11 Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets

E2133-03(2009) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface

E2134-01(2006) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)

E2135-10ae1 Standard Terminology for Property and Asset Management

E2136-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability

E2137-06(2011) Standard Guide for Estimating Monetary Costs and Liabilities for Environmental Matters

E2139-05(2011) Standard Test Method for Same-Different Test

E2140-01(2009) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

E2141-12 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units

E2142-08 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope

E2143-01(2013) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons

E2144-11 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres

E2145-07(2013) Standard Practice for Information Modeling

E2147-01(2013) Standard Specification for Audit and Disclosure Logs for Use in Health Information Systems

E2148-11b Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety

E2149-10 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions

E2150-09 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure

E2151-02(2010) Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings

E2152-12 Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data

E2153-01(2011) Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color

E2154-01(2008) Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)

E2156-04(2013) Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings

E2157-09 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter

E2159-01(2008) Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts

E2160-04(2012) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry

E2161-13 Standard Terminology Relating to Performance Validation in Thermal Analysis

E2162-07 Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders

E2163-06 Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs

E2164-08 Standard Test Method for Directional Difference Test

E2166-12 Standard Practice for Organizing and Managing Building Data

E2167-01(2008) Standard Guide for Selection and Use of Stone Consolidants

E2168-10 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating

E2169-12 Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids

E2171-02(2013) Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record

E2172-01(2008) Standard Guide for Conducting Laboratory Soil Toxicity Tests with the Nematode Caenorhabditis elegans

E2173-07(2011) Standard Guide for Disclosure of Environmental Liabilities

E2174-10ae1 Standard Practice for On-Site Inspection of Installed Fire Stops

E2175-01(2008) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers

E2177-11 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness

E2178-13 Standard Test Method for Air Permeance of Building Materials

E2179-03(2009) Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors

E2180-07(2012) Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials

E2181/E2181M-11 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable

E2186-02a(2010) Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay

E2187-09 Standard Test Method for Measuring the Ignition Strength of Cigarettes

E2188-10 Standard Test Method for Insulating Glass Unit Performance

E2189-10e1 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units

E2190-10 Standard Specification for Insulating Glass Unit Performance and Evaluation

E2191/E2191M-10 Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

E2192-13 Standard Guide for Planar Flaw Height Sizing by Ultrasonics

E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)

E2193-RUS-08 Метод определения коэффициента пропускания ультрафиолетового излучения моноэтиленгликоля (метод ультрафиолетовой спектрофотометрии)

E2194-12 Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials

E2195-09 Standard Terminology Relating to the Examination of Questioned Documents

E2196-12 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with Medium Shear and Continuous Flow Using Rotating Disk Reactor

E2197-11 Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides

E2198-10 Specification for Phytoseiulus persimilis Athias-Henriot (Acarina:Phytoseiidae)

E2199-08e1 Standard Specification for Encarsia formosa Gahan (Hymenoptera:Aphelinidae)

E2202-02(2009) Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards

E2203-02(2008) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

E2204-11a Standard Guide for Summarizing the Economic Impacts of Building-Related Projects

E2205/E2205M-02(2009)e1 Standard Guide for Risk-Based Corrective Action for Protection of Ecological Resources

E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers

E2207-08 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens

E2208-02(2010)e1 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems

E2209-02(2006)e2 Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry

E2210-12 Standard Specification for Guideline Elements Model version 3 (GEM III)—Document Model for Clinical Practice Guidelines

E2211-02(2010) Standard Specification for Relationship Between a Person (Consumer) and a Supplier of an Electronic Personal (Consumer) Health Record

E2212-02a(2010) Standard Practice for Healthcare Certificate Policy

E2213-03(2010) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications

E2214-12 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments

E2215-10 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels

E2216-02(2013) Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning

E2217-12 Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas

E2218-02(2008) Standard Test Method for Determining Forming Limit Curves

E2223-13 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics

E2224-10 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy

E2225-10 Standard Guide for Forensic Examination of Fabrics and Cordage

E2226-12 Standard Practice for Application of Hose Stream

E2227-02(2008) Standard Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer Chromatography

E2228-10 Standard Guide for Microscopic Examination of Textile Fibers

E2229-09 Standard Practices for Interpretation of Psychophysiological Detection of Deception (Polygraph) Data

E2230-13 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material

E2231-09 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

E2232-10 Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications

E2234-09(2013) Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL

E2235-04(2012) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods

E2236-10 Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules

E2238-12 Standard Guide for Evacuation Route Diagrams

E2239-12 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities

E2240-06 Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units

E2241-06 Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units

E2242-12a Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure

E2244-11 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2245-11 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2246-11 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2247-08 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland or Rural Property

E2248-13 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens

E2249-02(2008) Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity

E2251-11 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids

E2252-12 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities

E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters

E2254-11 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers

E2256-03(2008) Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service

E2257-13 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies

E2259-03a(2011) Standard Guide for Archiving and Retrieving ITS-Generated Data

E2260-03(2012) Standard Guide for Repointing (Tuckpointing) Historic Masonry

E2261/E2261M-12 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique

E2262-03(2009) Standard Practice for Estimating Thurstonian Discriminal Distances

E2263-12 Standard Test Method for Paired Preference Test

E2264-05 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products

E2265-09 Standard Terminology for Anchors and Fasteners in Concrete and Masonry

E2266-11 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion

E2267-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality

E2268-04(2011) Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference

E2269-05 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography

E2270-05 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions

E2271-05a(2012)e1 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities

E2273-03(2011) Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies

E2274-09 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants

E2275-03(2008) Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance

E2276-10 Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults

E2279-09 Standard Practice for Establishing the Guiding Principles of Property Management

E2280-09 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities

E2281-08a(2012)e1 Standard Practice for Process and Measurement Capability Indices

E2282-13 Standard Guide for Defining the Test Result of a Test Method

E2283-08 Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features

E2285-08 Standard Guide for Examination of Mechanical Checkwriter Impressions

E2286-08a Standard Guide for Examination of Dry Seal Impressions

E2287-09 Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text

E2288-09 Standard Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations

E2289-08 Standard Guide for Examination of Rubber Stamp Impressions

E2290-07a Standard Guide for Examination of Handwritten Items

E2292-04(2012) Standard Practice for Investigation of Investigating Carbon Monoxide Poisoning Incidents

E2293-03(2008)e1 Standard Practice for Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials for the Determination of Mercury

E2294-03(2008)e1 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry

E2295-03(2008)e1 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels

E2296-03(2008)e1 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry

E2297-04(2010) Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods

E2298-13 Standard Test Method for Instrumented Impact Testing of Metallic Materials

E2299-11 Standard Guide for Sensory Evaluation of Products by Children

E2300-09 Standard Specification for Highway Traffic Monitoring Devices

E2301-12 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry

E2302-03a(2009) Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer

E2303-11e1 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities

E2304-03(2011) Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System

E2306-13 Standard Practice for Disposal of Personal Property

E2307-10 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus

E2308-05 Standard Guide for Limited Asbestos Screens of Buildings

E2309/E2309M-05(2011)e1 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines

E2310-04(2009) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy

E2311-04(2009) Standard Practice for QCM Measurement of Spacecraft Molecular Contamination in Space

E2312-11 Standard Practice for Tests of Cleanroom Materials

E2313-08 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)

E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)

E2315-03(2008) Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure

E2316-03(2009) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides

E2317-04(2012) Standard Guide for Conducting Renewal Microplate-Based Life-Cycle Toxicity Tests with a Marine Meiobenthic Copepod

E2319-04(2011) Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

E2320-04(2012) Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions

E2321-03(2011) Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)

E2322-03(2009) Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction

E2324-04(2011) Standard Guide for PDD Paired Testing

E2325-05e1 Standard Guide for Non-destructive Examination of Paper

E2326-09 Standard Practice for Education and Training of Seized-Drug Analysts

E2327-10 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis

E2329-10 Standard Practice for Identification of Seized Drugs

E2330-12 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons

E2334-09(2013)e1 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample

E2335-12 Standard Guide for Laboratory Monitors

E2336-04(2013) Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems

E2337/E2337M-10 Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing

E2338-11 Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards

E2339-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E2340/E2340M-11 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

E2341/E2341M-05(2009) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

E2342-10 Standard Test Method for Durability Testing of Duct Sealants

E2344-04(2011) Standard Guide for Data Capture through the Dictation Process

E2346-09 Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers

E2347-11 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis

E2348-06(2010) Standard Guide for Framework for a Consensus-based Environmental Decision-making Process

E2349-12 Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing

E2350-07(2013) Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems

E2351-04a(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality

E2352-04(2010) Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations

E2353-06 Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades

E2354-10 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units

E2355-10 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface

E2356-10 Standard Practice for Comprehensive Building Asbestos Surveys

E2357-11 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies

E2358-04(2010) Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades

E2359-06 Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly

E2360-04(2010) Specification for Cryptolaemus montrouzieri Mulsant (Coleoptera: Coccinellidae)

E2361-13 Standard Guide for Testing Leave-On Products Using In-Situ Methods

E2362-09 Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection

E2363-06a Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry

E2364-04(2010) Standard Guide to Speech Recognition Technology Products in Health Care

E2365-05 Standard Guide for Environmental Compliance Performance Assessment

E2366-05 Standard Test Method for Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter

E2367-05 Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter

E2368-10 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing

E2369-12 Standard Specification for Continuity of Care Record (CCR)

E2371-13 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)

E2373-09 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique

E2374-10 Standard Guide for Acoustic Emission System Performance Verification

E2375-08(2013) Standard Practice for Ultrasonic Testing of Wrought Products

E2377-10 Standard Specification for Shelter, Electrical Equipment, Lightweight

E2378-13 Standard Practice for the Recognition of Impaired or Retired Personal Property

E2380/E2380M-09 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter

E2381-04(2010) Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams

E2382-04(2012) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy

E2385-11 Standard Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality

E2386-04(2011) Standard Guide for the Conduct of PDD Screening Examinations

E2387-05(2011) Standard Practice for Goniometric Optical Scatter Measurements

E2388-11 Standard Guide for Minimum Training Requirements for Forensic Document Examiners

E2389-05 Standard Guide for Examination of Documents Produced with Liquid Ink Jet Technology

E2390-06 Standard Guide for Examination of Documents Produced with Toner Technology

E2392/E2392M-10e1 Standard Guide for Design of Earthen Wall Building Systems

E2393-10a Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers

E2394-11 Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products

E2395-06 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact.

E2396-11 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems

E2397-11 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems

E2398-11 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems

E2399-11 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems

E2400-06 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems

E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry

E2404-13e1 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact

E2406-09 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations

E2407-04(2009) Standard Test Method for Effectiveness of Defoaming Agents

E2408-04(2009) Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes

E2409-08 Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol (Gas Chromatographic Method)

E2411-07 Standard Specification for Chemical Warfare Vapor Detector (CWVD)

E2412-10 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

E2412-RUS-10 Стандартная методика мониторинга состояния находящихся в условиях эксплуатации смазок методом анализа трендов с помощью инфракрасной спектрометрии на основе преобразования Фурье (FT-IR)

E2413-04(2009) Standard Guide for Hospital Preparedness and Response

E2414-05 Standard Test Method for Quantitative Sporicidal Three-Step Method (TSM) to Determine Sporicidal Efficacy of Liquids, Liquid Sprays, and Vapor or Gases on Contaminated Carrier Surfaces

E2415-05(2012) Standard Practice for Installing Piezoelectric Highway Traffic Sensors

E2418-06 Standard Guide for Readily Observable Mold and Conditions Conducive to Mold in Commercial Buildings: Baseline Survey Process

E2420-10 Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities

E2421-10 Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities

E2422-11 Standard Digital Reference Images for Inspection of Aluminum Castings

E2425-11 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers

E2426-10 Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS

E2427-11 Standard Test Method for Acceptance by Performance Testing for Sieves

E2428-08 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines

E2430-05(2013) Standard Specification For Expanded Polystyrene (“EPS”) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (“EIFS”)

E2431-12 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings

E2432-11 Standard Guide for General Principles of Sustainability Relative to Buildings

E2435-05(2010)e1 Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties

E2436-05(2010) Standard Specification for the Representation of Human Characteristics Data in Healthcare Information Systems

E2437-05 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials

E2438-05 Standard Practice for Implementing Standard Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials

E2439-09 Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations

E2443-05(2010)e1 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets

E2444-11e1 Terminology Relating to Measurements Taken on Thin, Reflecting Films

E2445-05(2010) Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems

E2446-05(2010) Standard Practice for Classification of Computed Radiology Systems

E2448-11 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

E2449-05(2013) Standard Guide for Irradiation of Pre-packaged Processed Meat and Poultry Products to Control Pathogens and Other Microorganisms

E2450-11 Standard Practice for Application of CaF2(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments

E2451-13 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples

E2452-12 Standard Practice for Equipment Management Process Maturity (EMPM) Model

E2453-13 Standard Practice for Determining the Life-Cycle Cost of Ownership of Personal Property

E2454-05(2011) Standard Guide for Sensory Evaluation Methods to Determine the Sensory Shelf Life of Consumer Products

E2455-06(2013) Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels

E2456-06(2012) Standard Terminology Relating to Nanotechnology

E2457-07(2013) Standard Terminology for Healthcare Informatics

E2458-10 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents from Nonporous Surfaces

E2459-05(2011) Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans

E2461-12 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs

E2462-10 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I

E2463-11 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II

E2465-13 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry

E2466-13 Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology

E2467-05(2012) Standard Practice for Developing Axle Count Adjustment Factors

E2468-05(2012) Standard Practice for Metadata to Support Archived Data Management Systems

E2469-08a Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography

E2470-09 Standard Specification for Polyester Grade Ethylene Glycol

E2471-05(2011)e1 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets

E2472-12e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions

E2473-05(2011) Standard Practice for the Occupational/Environmental Health View of the Electronic Health Record

E2474-06 Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology

E2475-10 Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control

E2476-09 Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture

E2478-11 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

E2479-11 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves

E2480-12 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands

E2481-12 Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules

E2484-08 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices

E2485-06 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings

E2486-06 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)

E2488-09 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison

E2489-11 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

E2490-09 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)

E2491-13 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

E2492-07(2012) Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test

E2493-07 Standard Guide for the Collection of Non-Volatile Memory Data in Evidentiary Vehicle Electronic Control Units

E2494-08 Standard Guide for Examination of Typewritten Items

E2495-13 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition

E2497-11 Standard Practice for Calculation of Asset Movement Velocity (AMV)

E2499-11 Standard Practice for Classification of Asset Physical Location Information

E2500-07(2012) Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment

E2501-11 Standard Specification for Light Source Products for Inspection of Fluorescent Coatings

E2502-06(2011) Standard Guide for Medical Transcription Workstations

E2503-13 Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus

E2505-07 Standard Practice for Industrial Rope Access

E2506-11 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities

E2509-08 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode

E2510-07(2013) Standard Test Method for Torque Calibration or Conformance of Rheometers

E2511-09 Standard Guide for Detailing of EIFS-Clad Wall Assemblies

E2513-07(2012) Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems

E2514-08 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses

E2515-11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel

E2516-11 Standard Classification for Cost Estimate Classification System

E2517-11 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)

E2518-11 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer)

E2520-07 Standard Practice for Verifying Minimum Acceptable Performance of Trace Explosive Detectors

E2521-07a Standard Terminology for Urban Search and Rescue Robotic Operations

E2522-07(2013) Standard Guide for Quality Indicators for Health Classifications

E2523-13 Standard Terminology for Metalworking Fluids and Operations

E2524-08 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles

E2525-08 Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies

E2526-08 Standard Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells and Human Hepatocarcinoma Cells

E2527-09 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight

E2529-06 Standard Guide for Testing the Resolution of a Raman Spectrometer

E2530-06 Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps

E2531-06e1 Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface

E2532-09 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

E2533-09 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications

E2534-10 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

E2535-07 Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings

E2536-09 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests

E2537-08 Standard Guide for Application of Continuous Quality Verification to Pharmaceutical and Biopharmaceutical Manufacturing

E2538-06(2011) Standard Practice for Defining and Implementing Pharmacotherapy Information Services within the Electronic Health Record (EHR) Environment and Networked Architectures

E2539-12 Standard Practice for Multiangle Color Measurement of Interference Pigments

E2540-08 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle

E2541-10 Standard Guide for Stakeholder-Focused, Consensus-Based Disaster Restoration Process for Contaminated Assets

E2542-08 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations

E2543-08 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters

E2544-11a Standard Terminology for Three-Dimensional (3D) Imaging Systems

E2545-07(2012) Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras

E2546-07 Standard Practice for Instrumented Indentation Testing

E2548-11e1 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis

E2549-09 Standard Practice for Validation of Seized-Drug Analytical Methods

E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry

E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers

E2552-08 Standard Guide for Assessing the Environmental and Human Health Impacts of New Energetic Compounds

E2553-07(2013) Standard Guide for Implementation of a Voluntary Universal Healthcare Identification System

E2554-13 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques

E2555-07(2012) Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection

E2556/E2556M-10 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment

E2557-07 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments

E2558-13 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces

E2560-13 Standard Specification for Data Format for Pavement Profile

E2561-07a(2012) Standard Practice for the Installation of Inductive Loop Detectors

E2562-12 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with High Shear and Continuous Flow using CDC Biofilm Reactor

E2563-13 Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method

E2564-13 Standard Practice for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method

E2565-09 Standard Guide for Consensus-based Process for an Occupational Safety and Health Standard that Includes an Occupational Exposure Guideline

E2566-08 Standard Test Method for Determining Visual Acuity and Field of View of On-Board Video Systems for Teleoperation of Robots for Urban Search and Rescue Applications

E2567-13 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis

E2568-09e1 Standard Specification for PB Exterior Insulation and Finish Systems

E2570-07 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage

E2573-12 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics

E2574/E2574M-12a Standard Test Method for Fire Testing of School Bus Seat Assemblies

E2575-08 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys

E2575-RUS-08 Стандартный метод определения содержания кислорода в меди и медных сплавах

E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions

E2579-13 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

E2580-12 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

E2581-07 Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications

E2582-07 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications

E2583-07(2011) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

E2584-10 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter

E2585-09 Standard Practice for Thermal Diffusivity by the Flash Method

E2586-12b Standard Practice for Calculating and Using Basic Statistics

E2587-12 Standard Practice for Use of Control Charts in Statistical Process Control

E2589-11 Standard Terminology Relating to Nonsieving Methods of Powder Characterization

E2590-09 Standard Guide for Conducting Hazard Analysis-Critical Control Point (HACCP) Evaluations

E2591-07(2013) Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians

E2592-07 Standard Practice for Evaluating Cache Packaged Weight and Volume of Robots for Urban Search and Rescue

E2593-12 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers

E2594-09 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)

E2595-07(2013) Standard Guide for Privilege Management Infrastructure

E2597-07e1 Standard Practice for Manufacturing Characterization of Digital Detector Arrays

E2598/E2598M-13 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers

E2599-11 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

E2600-10 Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions

E2601-08 Standard Practice for Radiological Emergency Response

E2602-09 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry

E2603-08 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters

E2604-09 Standard Practice for Data Characteristics of Equipment Records

E2605-13 Standard Practice for Receiving Assets

E2606-08 Standard Practice for Receipt Notification as a Result of Tangible Property Movement

E2607-08(2013) Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements

E2608-08 Standard Practice for Equipment Control Matrix (ECM)

E2609-08 Standard Test Method for Odor or Flavor Transfer or Both from Rigid Polymeric Packaging

E2610-08(2011) Standard Test Method for Sensory Analysis—Duo-Trio Test

E2611-09 Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method

E2613-08 Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using Fingerpads of Adults

E2614-08 Standard Guide for Evaluation of Cleanroom Disinfectants

E2615-08 Standard Specification for Aphidoletes aphidimyza (Rondani) (Diptera: Cecidomyiidae)

E2616-09 Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk Considerations

E2617-10 Standard Practice for Validation of Empirically Derived Multivariate Calibrations

E2618-09 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances

E2619/E2619M-09e1 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings

E2620-08 Standard Classification for Program and Project Estimate Summaries

E2623-08e1 Standard Practice for Reporting Thermometer Calibrations

E2624-09 Standard Practice for Torque Calibration of Testing Machines and Devices

E2625-09 Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities

E2626-08e1 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals

E2627-10 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials

E2628-09e1 Practice for Dosimetry in Radiation Processing

E2629-11 Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems

E2630-08(2013) Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source

E2631-09 Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label

E2632/E2632M-13e1 Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials

E2634-11 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

E2635-08 Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation

E2637-08 Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E 2150

E2638-10 Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room

E2639-12 Standard Test Method for Blast Resistance of Trash Receptacles

E2640-10 Standard Guide for Resource Management in Emergency Management and Homeland Security

E2641-09 Standard Practice for Best Practices for Safe Application of 3D Imaging Technology

E2642-09 Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors

E2643-09 Standard Terminology Relating to Natural Multi-Cellular Biological Control Organisms

E2644-08 Standard Specification for Podisus maculiventris (Say) (Hemiptera: Pentatomidae)

E2645-08 Standard Specification for Feltiella acarisuga (Vallot) (Diptera: Cecidomyiidae)

E2646-08 Standard Specification for Amblyseius cucumeris (=Neoseiulus) Oudemans (Acarina: Phytoseiidae)

E2647-13 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown Using Drip Flow Biofilm Reactor with Low Shear and Continuous Flow

E2649-12 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

E2651-10 Standard Guide for Powder Particle Size Analysis

E2652-12 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C

E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories

E2655-08 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods

E2656-10 Standard Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute

E2657-11 Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids

E2658-11 Standard Practices for Verification of Speed for Material Testing Machines

E2659-09e1 Standard Practice for Certificate Programs

E2660-11 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications

E2661/E2661M-10 Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications

E2662-09 Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

E2663-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

E2664-09a Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol

E2665-08 Standard Specification for Archiving ITS-Generated Traffic Monitoring Data

E2666-09 Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports

E2667-09 Standard Practice for Acquiring Intersection Turning Movement Traffic Data

E2668-10 Standard Guide for Emergency Operations Center (EOC) Development

E2669-11 Standard Digital Reference Images for Titanium Castings

E2670-09 Standard Test Method for Objective Quantification of Dental Plaque Using Digital Still Cameras

E2671-10 Standard Practice for Defining Movements, Shipments, and Transfers of Tangible Property

E2672-09 Standard Practice for Identification and Categorization of Tooling

E2674-09 Standard Practice for Assessment of Impact of Mobile Data Storage Device (MDSD) Loss

E2675-09 Standard Practice for Property Management System Outcomes

E2676-09 Standard Practice for Tangible Property Mobility Index (MI)

E2678-09 Standard Guide for Education and Training in Computer Forensics

E2679-09 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration

E2680-09e1 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)

E2681-13 Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum

E2682-09 Standard Guide for Developing a Disaster Recovery Plan for Medical Transcription Departments and Businesses

E2683-09 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages

E2684-09 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages

E2685-09 Standard Specification for Steel Blades Used with the Photovoltaic Module Surface Cut Test

E2686-09 Standard Test Method for Volatile Organic Compound (VOC) Solvents Absorbed/Adsorbed By Simulated Soil Impacted by Pesticide Emulsifiable Concentrate (EC) Applications

E2688-10 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics

E2690-10e2 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics

E2691-11 Standard Practice for Job Productivity Measurement

E2692-10 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,

E2693-09 Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment

E2694-11 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

E2695-09 Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy

E2696-09(2013) Standard Practice for Life and Reliability Testing Based on the Exponential Distribution

E2698-10 Standard Practice for Radiological Examination Using Digital Detector Arrays

E2699-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

E2700-09 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays

E2701-09 Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing

E2707-09 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure

E2708-10 Standard Terminology for Personnel Credentialing

E2709-12 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure

E2710-11e1 Standard Guide for Preservation of Charred Documents

E2711-11 Standard Guide for Preservation of Liquid Soaked Documents

E2712-09e1 Standard Test Methods for Forming Superplastic Metallic Sheet

E2713-11 Standard Guide to Forensic Engineering

E2714-13 Standard Test Method for Creep-Fatigue Testing

E2715-09 Standard Practice for Moveable Property Storage

E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry

E2717-11 Standard Practice for Estimating the Environmental Load of Residential Wastewater

E2718-10 Standard Guide for Financial Disclosures Attributed to Climate Change

E2719-09 Standard Guide for Fluorescence—Instrument Calibration and Qualification

E2720-10 Standard Test Method for Evaluation of Effectiveness of Decontamination Procedures for Air-Permeable Materials when Challenged with Biological Aerosols Containing Human Pathogenic Viruses

E2721-10 Standard Test Method for Evaluation of Effectiveness of Decontamination Procedures for Surfaces When Challenged with Droplets Containing Human Pathogenic Viruses

E2722-09 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media

E2725-10 Standard Guide for Basic Assessment and Management of Greenhouse Gases

E2726/E2726M-12a Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands

E2727-10 Standard Practice for Assessment of Rainwater Quality

E2728-11 Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings

E2729-09 Standard Practice for Rectification of Spectrophotometric Bandpass Differences

E2730-10 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits

E2731-09 Standard Specification for Materials to Mitigate the Spread of Radioactive Contamination after a Radiological Dispersion Event

E2732-11 Standard Practice for Responder Family Support Service

E2733-10 Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems

E2734/E2734M-10 Standard Specification for Dimensions of Knife-Edge Flanges

E2735-13 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments

E2736-10 Standard Guide for Digital Detector Array Radiology

E2737-10 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

E2738-11 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

E2739-10 Standard Specification for Personnel Decontamination System to be Used During a Chemical Event

E2740-12e1 Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing

E2741-11 Standard Specification for Evaluation and Selection of Destinations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

E2742-11 Standard Specification for Evaluation and Selection of Exhibits for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

E2743-11 Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers

E2745-11 Standard Specification for Evaluation and Selection of Audio Visual (AV) and Production for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

E2746-11 Standard Specification for Evaluation and Selection of Communication and Marketing Materials for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

E2747-11 Standard Specification for Evaluation and Selection of Onsite Offices for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

E2748-12a Standard Guide for Fire-Resistance Experiments

E2749-10 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens

E2750-13e1 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM

E2751/E2751M-13 Standard Practice for Design and Performance of Supported Laminated Glass Walkways

E2752-10 Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products

E2753-10 Standard Specification for Eretmocerus eremicus Rose and Zolnerowich (Hymenoptera: Aphelinidae)

E2754-10 Standard Specification for Delphastus catalinae (Horn) (Coleoptera:Coccinellidae)

E2755-10 Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hand Sanitizer Formulations Using Hands of Adults

E2756-10 Standard Terminology Relating to Antimicrobial and Antiviral Agents

E2758-10 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers

E2759-10 Standard Practice for Highway Traffic Monitoring Truth-in-Data

E2760-10e2 Standard Test Method for Creep-Fatigue Crack Growth Testing

E2762-10 Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL

E2763-10 Standard Practice for Computer Forensics

E2764-11 Standard Practice for Uncertainty Assessment in the Context of Seized-Drug Analysis

E2765-11 Standard Practice for Use of Image Capture and Storage Technology in Forensic Document Examination

E2766-13 Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs

E2767-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods

E2768-11 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)

E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

E2770-10 Standard Guide for Operational Guidelines for Initial Response to a Suspected Biothreat Agent

E2771-11 Standard Terminology for Homeland Security Applications

E2772-13e1 Standard Specification for Evaluation and Selection of Accommodations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

E2773-11 Standard Specification for Evaluation and Selection of Food and Beverage for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

E2774-11 Standard Specification for Evaluation and Selection of Venues for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences

E2775-11 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction

E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters

E2780-10 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters

E2781-11 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis

E2782-11 Standard Guide for Measurement Systems Analysis (MSA)

E2783-11 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure

E2784-10 Standard Test Method for Evaluation of the Effectiveness of Handwash Formulations Using the Paper Towel (Palmar) Method of Hand Contamination

E2785-11 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions

E2786-10 Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems

E2787-11 Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

E2788-11 Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems

E2789-10 Standard Guide for Fretting Fatigue Testing

E2790-11 Standard Guide for Identifying and Complying With Continuing Obligations

E2792-13 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion

E2793-10e1 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment

E2797-11 Standard Practice for Building Energy Performance Assessment for a Building Involved in a Real Estate Transaction

E2798-11 Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application

E2799-12 Standard Test Method for Testing Disinfectant Efficacy against Pseudomonas aeruginosa Biofilm using the MBEC Assay

E2800-11 Standard Practice for Characterization of Bacillus Spore Suspensions for Reference Materials

E2801-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Gaps

E2802-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Hurdles

E2803-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Inclined Planes

E2804-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Stairs/Landings

E2805-11 Standard Practice for Measurement of the Biological Activity of Ricin

E2807-11 Standard Specification for 3D Imaging Data Exchange, Version 1.0

E2808-11 Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis

E2809-13 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations

E2810-11e1 Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units

E2811-11 Standard Practice for Management of Low Risk Property (LRP)

E2812-11 Standard Practice for Uniform Data Management in Asset Management Records Systems

E2813-12 Standard Practice for Building Enclosure Commissioning

E2814-11 Standard Guide for Industrial Woven Wire Filter Cloth

E2816-13 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems

E2817-11 Standard Test Method for Test Fueling Masonry Heaters

E2818-11 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds

E2819-11 Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL

E2820-13 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors

E2821-13 Standard Specification for ?Compacted Mineral-Insulated, Metal-Sheathed Cable Used in Industrial Resistance Thermometers

E2823-11 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)

E2824-11 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method

E2825-12 Standard Guide for Forensic Digital Image Processing

E2826-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Continuous Pitch/Roll Ramps

E2827-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Crossing Pitch/Roll Ramps

E2828-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Symmetric Stepfields

E2829-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Maneuvering Tasks: Sustained Speed

E2830-11 Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks: Grasped Sleds

E2831/E2831M-11 Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places

E2832-12 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)

E2833-12 Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Construction, Including Special Inspection

E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)

E2835-11 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device

E2837-11 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies

E2838-11 Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

E2839-11 Standard Test Method for Production of Clostridium difficile Spores for Use in Efficacy Evaluation of Antimicrobial Agents

E2840-11 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

E2841-11 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions

E2846-11 Standard Guide for Thermocouple Verification

E2847-13 Standard Practice for ?Calibration and Accuracy Verification of Wideband Infrared Thermometers

E2848-11e1 Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance

E2852-13 Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation

E2853-12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Human-System Interaction (HSI): Search Tasks: Random Mazes with Complex Terrain

E2854-12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Line-of-Sight Range

E2855-12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Non-Line-of-Sight Range

E2856-13 Standard Guide for Estimation of LNAPL Transmissivity

E2857-11 Standard Guide for Validating Analytical Methods

E2858-12 Standard Practice for Sales of Personal Property

E2859-11 Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy

E2860-12 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels

E2861-11 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams

E2862-12 Standard Practice for Probability of Detection Analysis for Hit/Miss Data

E2863-12 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization

E2865-12 Standard Guide for Measurement of Electrophoretic Mobility and Zeta Potential of Nanosized Biological Materials

E2866-12 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid

E2867-13 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry

E2870-13 Standard Test Method for Evaluating Relative Effectiveness of Antimicrobial Handwashing Formulations using the Palmar Surface and Mechanical Hand Sampling

E2871-12 Standard Test Method for Evaluating Disinfectant Efficacy against Pseudomonas aeruginosa Biofilm Grown in CDC Biofilm Reactor using Single Tube Method

E2875/E2875M-12 Standard Guide for Personal Protective Equipment for the Handling of Flat Glass

E2876-13 Standard Guide for Integrating Sustainable Objectives into Cleanup

E2877-12e1 Standard Guide for Digital Contact Thermometers

E2882-12 Standard Guide for Analysis of Clandestine Drug Laboratory Evidence

E2883-13 Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)

E2884-13 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays

E2885-13 Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications

E2888-12 Standard Practice for Process for Inactivation of Rodent Retrovirus by pH

E2889-12 Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment

E2890-12 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method

E2894-12 Standard Test Method for Applying Aerosolized Bacillus Spores as Dry Inocula to Inanimate Surfaces

E2896-12 Standard Test Method for Quantitative Petri Plate Method (QPM) for Determining the Effectiveness of Antimicrobial Towelettes

E2897-12 Standard Guide for Evaluation of the Effectiveness of Hand Hygiene Topical Antimicrobial Products using ex vivo Porcine Skin

E2900-12 Standard Practice for Spacecraft Hardware Thermal Vacuum Bakeout

E2902-12 Standard Practice for Measurement of Body Armor Wearers

E2903-13 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes

E2904-12 Standard Practice for Characterization and Verification of Phased Array Probes

E2905/E2905M-12 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods

E2906/E2906M-13 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles

E2907/E2907M-13 Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing

E2908-12 Standard Guide for Fire Prevention for Photovoltaic Panels, Modules, and Systems

E2909-13 Standard Guide for Investigation/Study/Assay Tab-Delimited Format for Nanotechnologies (ISA-TAB-Nano): Standard File Format for the Submission and Exchange of Data on Nanomaterials and Characterizations

E2910-12 Standard Guide for Preferred Methods for Acceptance of Product

E2911-13 Standard Guide for Relative Intensity Correction of Raman Spectrometers

E2912-13 Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction

E2916-13 Standard Terminology for Digital and Multimedia Evidence Examination

E2919-13 Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose

E2923-13 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry

E2928/E2928M-13 Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique

E2929-13 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction

E2930-13 Standard Practice for Pressure Decay Leak Test Method

E2931-13 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds

E2933-13 Standard Specification for Stationary Point Chemical Vapor Detectors (SPCVD) for Homeland Security Applications