C

C4-00 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
C5-79(1997) Standard Specification for Quicklime for Structural Purposes
C11-98 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
C12-00 Standard Practice for Installing Vitrified Clay Pipe Lines
C14M-99 Standard Specification for Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
C14-99 Standard Specification for Concrete Sewer, Storm Drain, and Culvert Pipe
C16-81(1996)e1 Standard Test Method for Load Testing Refractory Brick at High Temperatures
C20-00 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C22/C22M-00 Standard Specification for Gypsum
C24-01 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
C25-99 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C27-98 Standard Classification of Fireclay and High-Alumina Refractory Brick
C28/C28M-00 Standard Specification for Gypsum Plasters
C29/C29M-97 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
C31/C31M-00e1 Standard Practice for Making and Curing Concrete Test Specimens in the Field
C32-93(1999)e1 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
C33-01 Standard Specification for Concrete Aggregates
C34-96 Standard Specification for Structural Clay Load-Bearing Wall Tile
C35-01 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
C36/C36M-99e1 Standard Specification for Gypsum Wallboard
C37/C37M-01 Standard Specification for Gypsum Lath
C39/C39M-01 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C40-99 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
C42/C42M-99 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C43-01 Standard Terminology of Structural Clay Products
C50-00 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C51-01 Standard Terminology Relating to Lime and Limestone (as used by the Industry)
C55-01 Standard Specification for Concrete Brick
C56-96 Standard Specification for Structural Clay Non-Load-Bearing Tile
C59/C59M-00 Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C61/C61M-00 Standard Specification for Gypsum Keene's Cement
C62-01 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
C67-01 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
C70-94(2001) Standard Test Method for Surface Moisture in Fine Aggregate
C71-01 Standard Terminology Relating to Refractories
C73-99a Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
C76M-00 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
C76-00 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C78-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
C79/C79M-01 Standard Specification for Treated Core and Nontreated Core Gypsum Sheathing Board
C87-83(1995)e1 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
C88-99a Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
C90-01 Standard Specification for Loadbearing Concrete Masonry Units
C91-99 Standard Specification for Masonry Cement
C92-95(1999) Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
C94/C94M-00e1 Standard Specification for Ready-Mixed Concrete
C97-96e1 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C99-87(2000) Standard Test Method for Modulus of Rupture of Dimension Stone
C108-46(1998) Standard Symbols for Heat Transmission
C109/C109M-99 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
C110-00a Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C113-93(1998) Standard Test Method for Reheat Change of Refractory Brick
C114-00 Standard Test Methods for Chemical Analysis of Hydraulic Cement
C115-96a Standard Test Method for Fineness of Portland Cement by the Turbidimeter
C117-95 Standard Test Method for Materials Finer than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
C118M-99 Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric]
C118-99 Standard Specification for Concrete Pipe for Irrigation or Drainage
C119-01 Standard Terminology Relating to Dimension Stone
C120-00 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
C121-90(1999) Standard Test Method for Water Absorption of Slate
C123-98 Standard Test Method for Lightweight Particles in Aggregate
C125-00ae1 Standard Terminology Relating to Concrete and Concrete Aggregates
C126-99 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
C127-88(2001) Standard Test Method for Specific Gravity and Absorption of Coarse Aggregate
C128-97 Standard Test Method for Specific Gravity and Absorption of Fine Aggregate
C129-00a Standard Specification for Nonloadbearing Concrete Masonry Units
C131-96 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C133-97 Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C134-95(1999) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C135-96 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C136-96a Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C138/C138M-01a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C139-99 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
C140-01 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
C141-97 Standard Specification for Hydraulic Hydrated Lime for Structural Purposes
C142-97 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
C143/C143M-00 Standard Test Method for Slump of Hydraulic Cement Concrete
C144-99 Standard Specification for Aggregate for Masonry Mortar
C146-94a(1999) Standard Test Methods for Chemical Analysis of Glass Sand
C147-86(2000) Standard Test Methods for Internal Pressure Strength of Glass Containers
C148-00 Standard Test Methods for Polariscopic Examination of Glass Containers
C149-86(2000) Standard Test Method for Thermal Shock Resistance of Glass Containers
C150-00 Standard Specification for Portland Cement
C151-00 Standard Test Method for Autoclave Expansion of Portland Cement
C155-97 Standard Classification of Insulating Firebrick
C156-98 Standard Test Method for Water Retention by Concrete Curing Materials
C157/C157M-99 Standard Test Method for Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
C159-98 Standard Specification for Vitrified Clay Filter Blocks
C162-99 Standard Terminology of Glass and Glass Products
C163-88(1997) Standard Practice for Mixing Thermal Insulating Cement Samples
C165-00 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C166-87(1997) Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
C167-98 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C168-00 Standard Terminology Relating to Thermal Insulating Materials
C169-92(2000) Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
C170-90(1999) Standard Test Method for Compressive Strength of Dimension Stone
C171-97a Standard Specification for Sheet Materials for Curing Concrete
C172-99 Standard Practice for Sampling Freshly Mixed Concrete
C173/C173M-01 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C174/C174M-97 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
C177-97 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C179-85(1999) Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C181-91(1997)e1 Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
C182-88(1998) Standard Test Method for Thermal Conductivity of Insulating Firebrick
C183-97 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
C184-94e1 Standard Test Method for Fineness of Hydraulic Cement by the 150-µm (No. 100) and 75-µm (No. 200) Sieves
C185-01 Standard Test Method for Air Content of Hydraulic Cement Mortar
C186-98 Standard Test Method for Heat of Hydration of Hydraulic Cement
C187-98 Standard Test Method for Normal Consistency of Hydraulic Cement
C188-95 Standard Test Method for Density of Hydraulic Cement
C191-99 Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
C192/C192M-00 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
C195-00 Standard Specification for Mineral Fiber Thermal Insulating Cement
C196-00 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C198-91(1996)e1 Standard Test Method for Cold Bonding Strength of Refractory Mortar
C199-84(2000) Standard Test Method for Pier Test for Refractory Mortars
C201-93(1998) Standard Test Method for Thermal Conductivity of Refractories
C202-93(1998) Standard Test Method for Thermal Conductivity of Refractory Brick
C203-99 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C204-00 Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus
C206-84(1997) Standard Specification for Finishing Hydrated Lime
C207-91(1997) Standard Specification for Hydrated Lime for Masonry Purposes
C208-95(2001) Standard Specification for Cellulosic Fiber Insulating Board
C209-98 Standard Test Methods for Cellulosic Fiber Insulating Board
C210-95(1999) Standard Test Method for Reheat Change of Insulating Firebrick
C212-00 Standard Specification for Structural Clay Facing Tile
C215-97e1 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens
C216-01 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C217-94(1999) Standard Test Method for Weather Resistance of Slate
C219-01 Standard Terminology Relating to Hydraulic Cement
C220-91(1999) Standard Specification for Flat Asbestos-Cement Sheets
C221-98 Standard Specification for Corrugated Asbestos-Cement Sheets
C222-97 Standard Specification for Asbestos-Cement Roofing Shingles
C223-98 Standard Specification for Asbestos-Cement Siding
C224-78(1999) Standard Practice for Sampling Glass Containers
C225-85(1999) Standard Test Methods for Resistance of Glass Containers to Chemical Attack
C226-96 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
C227-97a Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
C230/C230M-98e2 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
C231-97e1 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C232-99 Standard Test Methods for Bleeding of Concrete
C233-00 Standard Test Method for Air-Entraining Admixtures for Concrete
C236-89(1993)e1 Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box
C240-97 Standard Test Methods of Testing Cellular Glass Insulation Block
C241-90(1997)e1 Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C242-00a Standard Terminology of Ceramic Whitewares and Related Products
C243-95 Standard Test Method for Bleeding of Cement Pastes and Mortars
C260-00 Standard Specification for Air-Entraining Admixtures for Concrete
C265-99 Standard Test Method for Calcium Sulfate in Hydrated Portland Cement Mortar
C266-99 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C267-97 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C270-00 Standard Specification for Mortar for Unit Masonry
C271-99 Standard Test Method for Density of Sandwich Core Materials
C272-91(1996) Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
C273-00e1 Standard Test Method for Shear Properties of Sandwich Core Materials
C274-99 Standard Terminology of Structural Sandwich Constructions
C279-88(2001) Standard Specification for Chemical-Resistant Masonry Units
C282-99 Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)
C283-97 Standard Test Method for Resistance of Porcelain Enameled Utensils to Boiling Acid
C285-88(1999) Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
C286-99 Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
C287-98 Standard Specification for Chemical-Resistant Sulfur Mortar
C288-87(1997) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C289-94 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
C293-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
C294-98 Standard Descriptive Nonmenclature for Constituents of Concrete Aggregates
C295-98 Standard Guide for Petrographic Examination of Aggregates for Concrete
C296-00 Standard Specification for Asbestos-Cement Pressure Pipe
C297-94(1999) Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
C301-98 Standard Test Methods for Vitrified Clay Pipe
C302-95 Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303-98 Standard Test Method for Dimensions and Density of Preformed Block-Type Thermal Insulation
C305-99 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C307-99 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C308-00 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
C309-98a Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
C311-00 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
C315-00 Standard Specification for Clay Flue Linings
C317/C317M-00 Standard Specification for Gypsum Concrete
C318/C318M-00 Standard Specification for Gypsum Formboard
C321-00 Standard Test Method for Bond Strength of Chemical-Resistant Mortars
C322-82(1997)e1 Standard Practice for Sampling Ceramic Whiteware Clays
C323-56(1999) Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
C324-82(1999) Standard Test Method for Free Moisture in Ceramic Whiteware Clays
C325-81(1997)e1 Standard Test Method for Wet Sieve Analysis of Ceramic Whiteware Clays
C326-82(1997)e1 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
C329-88(1999) Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
C330-00 Standard Specification for Lightweight Aggregates for Structural Concrete
C331-01 Standard Specification for Lightweight Aggregates for Concrete Masonry Units
C332-99 Standard Specification for Lightweight Aggregates for Insulating Concrete
C335-95 Standard Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation
C336-71(2000) Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
C338-93(1998) Standard Test Method for Softening Point of Glass
C341-96 Standard Test Method for Length Change of Drilled or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
C346-87(1998)e1 Standard Test Method for 45-deg Specular Gloss of Ceramic Materials
C348-97 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
C349-97 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
C351-92b(1999) Standard Test Method for Mean Specific Heat of Thermal Insulation
C353-97 Standard Test Method for Adhesion of Dried Thermal Insulating or Finishing Cement
C354-97 Standard Test Method for Compressive Strength of Thermal Insulating or Finishing Cement
C356-87(1997) Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C357-94(1998) Standard Test Method for Bulk Density of Granular Refractory Materials
C359-99 Standard Test Method for Early Stiffening of Portland Cement (Mortar Method)
C361M-99 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe [Metric]
C361-99 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
C363-00 Standard Test Method for Delamination Strength of Honeycomb Core Materials
C364-99 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
C365-00 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
C366-99 Standard Test Methods for Measurement of Thickness of Sandwich Cores
C367-99 Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
C368-88(1999) Standard Test Method for Impact Resistance of Ceramic Tableware
C370-88(1999) Standard Test Method for Moisture Expansion of Fired Whiteware Products
C371-89(1999) Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
C372-94 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
C373-88(1999) Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products
C374-70(1998) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
C375-58(1999) Standard Classification of Water Used in Milling of Porcelain Enamel
C383-97 Standard Test Method for Wet Adhesion of Thermal Insulating Cements to Metal
C384-98 Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
C385-58(1998) Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
C386-93(1998) Standard Practice for Use of Chemical-Resistant Sulfur Mortar
C387-00 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
C390-79(2000) Standard Criteria for Sampling and Acceptance of Preformed Thermal Insulation Lots
C393-00 Standard Test Method for Flexural Properties of Sandwich Constructions
C394-00 Standard Test Method for Shear Fatigue of Sandwich Core Materials
C395-01 Standard Specification for Chemical-Resistant Resin Mortars
C397-00 Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C398-98 Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
C399-98 Standard Practice for Use of Chemical-Resistant Resin Mortars
C400-98 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
C401-91(2000) Standard Classification of Alumina and Alumina-Silicate Castable Refractories
C403/C403M-99 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C404-97 Standard Specification for Aggregates for Masonry Grout
C405-82(1997) Standard Practice for Estimating Consistency of Wet-Mixed Thermal Insulating Cement
C406-00 Standard Specification for Roofing Slate
C408-88(1999) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
C410-60(1997) Standard Specification for Industrial Floor Brick
C411-97 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C412M-99 Standard Specification for Concrete Drain Tile [Metric]
C412-99 Standard Specification for Concrete Drain Tile
C413-01 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C414-99 Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C416-97 Standard Classification of Silica Refractory Brick
C417-93(1998) Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C418-98 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
C419-94(2000) Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C421-00 Standard Test Method for Tumbling Friability of Preformed Block-Type Thermal Insulation
C423-00 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C424-93(1999) Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
C425-00 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
C426-99 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
C428-97 Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
C429-82(1996) Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
C430-96 Standard Test Method for Fineness of Hydraulic Cement by the 45-µm (No. 325) Sieve
C441-97e1 Standard Test Method for Effectiveness of Mineral Admixtures or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
C442/C442M-99a Standard Specification for Gypsum Backing Board, Gypsum Coreboard, and Gypsum Shaftliner Board
C443M-98 Standard Specification for Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets [Metric]
C443-98 Standard Specification for Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets
C444M-95 Standard Specification for Perforated Concrete Pipe [Metric]
C444-95 Standard Specification for Perforated Concrete Pipe
C446-88(1993)e1 Standard Test Method for Breaking Load and Calculated Modulus of Rupture of Preformed Insulation for Pipes
C447-85(1995)e1 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C448-88(1999) Standard Test Methods for Abrasion Resistance of Porcelain Enamels
C449/C449M-00 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C450-99e1 Standard Practice for Prefabrication and Field Fabrication of Thermal Insulating Fitting Covers for NPS Piping, Vessel Lagging, and Dished Head Segments
C451-99 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C452-95 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
C454-83(1998) Standard Practice for Disintegration of Carbon Refractories by Alkali
C455-97(1999) Standard Classification of Chrome Brick, Chrome-Magnesia Brick, Magnesia-Chrome Brick, and Magnesia Brick
C456-93(1998) Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
C457-98 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
C458-98 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
C459-97 Standard Test Methods for Asbestos-Cement Flat Products
C461-81(1997)e1 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
C465-99 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
C466-97 Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
C467-97 Standard Classification of Mullite Refractories
C469-94 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
C470/C470M-98 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
C471M-96 Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products [Metric]
C472-99 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
C473-00 Standard Test Methods for Physical Testing of Gypsum Panel Products
C474-01 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
C475-94 Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C476-01 Standard Specification for Grout for Masonry
C478M-97 Standard Specification for Precast Reinforced Concrete Manhole Sections [Metric]
C478-97 Standard Specification for Precast Reinforced Concrete Manhole Sections
C479-95(2001) Standard Specification for Vitrified Clay Liner Plates
C480-99 Standard Test Method for Flexure Creep of Sandwich Constructions
C481-99 Standard Test Method for Laboratory Aging of Sandwich Constructions
C482-81(1996) Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement
C483-95(2000) Standard Test Method for Electrical Resistance of Conductive Ceramic Tile
C484-99 Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
C485-83(1999) Standard Test Method for Measuring Warpage of Ceramic Tile
C488-83(1998) Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C490-00a Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
C492-92(1998) Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C493-98 Standard Test Method for Bulk Density and Porosity of Granular Refractory Materials by Mercury Displacement
C494/C494M-99ae1 Standard Specification for Chemical Admixtures for Concrete
C495-99a Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
C496-96 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
C497M-97 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
C497-98 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
C498-95 Standard Specification for Perforated Clay Drain Tile
C499-78(1999) Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
C500-98 Standard Test Methods for Asbestos-Cement Pipe
C501-84(1996) Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
C502-93a(1999) Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
C503-99e1 Standard Specification for Marble Dimension Stone (Exterior)
C505M-99a Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
C505-99a Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints
C506M-00 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Metric]
C506-00 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C507M-00 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric]
C507-00 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C508-00 Standard Specification for Asbestos-Cement Underdrain Pipe
C509-00 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C510-90(1997)e1 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C511-98 Standard Specification for Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C512-87(1994) Standard Test Method for Creep of Concrete in Compression
C513-89(1995) Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
C514-96 Standard Specification for Nails for the Application of Gypsum Board
C515-95(2001) Standard Specification for Chemical-Resistant Ceramic Tower Packings
C516-80(1996)e1 Standard Specification for Vermiculite Loose Fill Thermal Insulation
C518-98 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C520-98 Standard Test Methods for Density of Granular Loose Fill Insulations
C522-87(1997) Standard Test Method for Airflow Resistance of Acoustical Materials
C530-99 Standard Specification for Structural Clay Nonloadbearing Screen Tile
C531-00 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C533-95(2001) Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
C534-01 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C535-96e1 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C536-83(1998) Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
C537-87(1998) Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
C538-83(1998) Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels
C539-84(2000) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
C541-98 Standard Specification for Linings for Asbestos-Cement Pipe
C542-94(1999) Standard Specification for Lock-Strip Gaskets
C544-92(1998)e1 Standard Test Method for Hydration of Magnesite or Periclase Grain
C545-97 Standard Classification of Zircon Refractories
C547-00 Standard Specification for Mineral Fiber Pipe Insulation
C549-81(1995)e1 Standard Specification for Perlite Loose Fill Insulation
C550-95 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
C551-98 Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
C552-00 Standard Specification for Cellular Glass Thermal Insulation
C553-00 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C554-93(1999) Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
C557-99 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
C559-90(2000) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
C560-88(1998) Standard Test Methods for Chemical Analysis of Graphite
C561-91(2000) Standard Test Method for Ash in a Graphite Sample
C562-91(2000) Standard Test Method for Moisture in a Graphite Sample
C563-96 Standard Test Method for Optimum SO3 in Hydraulic Cement Using 24-h Compressive Strength
C564-97 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C565-93(1998) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
C566-97 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
C567-00 Standard Test Method for Density Structural Lightweight Concrete
C568-99 Standard Specification for Limestone Dimension Stone
C570-00 Standard Specification for Oil- and Resin-Base Caulking Compound for Building Construction
C577-99 Standard Test Method for Permeability of Refractories
C578-00 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
C579-01 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings and Polymer Concretes
C580-98 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C581-00 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C582-95 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
C583-00 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C584-81(1999) Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
C585-90(1998) Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)
C586-99 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates (Rock Cylinder Method)
C587-97 Standard Specification for Gypsum Veneer Plaster
C588/C588M-01 Standard Specification for Gypsum Base for Veneer Plasters
C591-00 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C592-00 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
C593-95(2000) Standard Specification for Fly Ash and Other Pozzolans for Use With Lime
C595-00ae1 Standard Specification for Blended Hydraulic Cements
C596-96e1 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
C597-97 Standard Test Method for Pulse Velocity Through Concrete
C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
C599-91(1995)e1 Standard Specification for Conical Process Glass Pipe and Fittings
C600-85(2000) Standard Test Method of Thermal Shock Test on Glass Pipe
C601-85(2000) Standard Test Method for Pressure Test on Glass Pipe
C602-95a Standard Specification for Agricultural Liming Materials
C603-90(1997)e1 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C604-98 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C607-88(2000) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
C609-90(2000) Standard Test Method for Measurement of Small Color Differences Between Ceramic Wall or Floor Tile
C610-99 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C611-98 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
C612-00a Standard Specification for Mineral Fiber Block and Board Thermal Insulation
C613/C613M-97 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
C614-74(1999) Standard Test Method for Alkali Resistance of Porcelain Enamels
C615-99 Standard Specification for Granite Dimension Stone
C616-99 Standard Specification for Quartz-Based Dimension Stone
C617-98 Standard Practice for Capping Cylindrical Concrete Specimens
C618-00 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete
C621-84(1995) Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C623-92(2000) Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
C625-95(2000) Standard Practice for Reporting Irradiation Results on Graphite
C627-93(1999) Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
C629-99 Standard Specification for Slate Dimension Stone
C630/C630M-01 Standard Specification for Water-Resistant Gypsum Backing Board
C631-95a(2000) Standard Specification for Bonding Compounds for Interior Gypsum Plastering
C632-88(2000) Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
C633-79(1999) Standard Test Method for Adhesion or Cohesive Strength of Flame-Sprayed Coatings
C634-00 Standard Terminology Relating to Environmental Acoustics
C635-00 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636-96 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
C637-98a Standard Specification for Aggregates for Radiation-Shielding Concrete
C638-92(1997) Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete
C639-01 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C641-98e1 Standard Test Method for Staining Materials in Lightweight Concrete Aggregates
C642-97 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
C645-00 Standard Specification for Nonstructural Steel Framing Members
C647-95(2000) Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
C648-98 Standard Test Method for Breaking Strength of Ceramic Tile
C650-97 Standard Test Method for Resistance of Ceramic Tile to Chemical Substances
C651-91(2000) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
C652-01 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
C653-97 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
C654M-99 Standard Specification for Porous Concrete Pipe [Metric]
C654-99 Standard Specification for Porous Concrete Pipe
C655M-00 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric]
C655-00 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C656-94a(2001) Standard Specification for Structural Insulating Board, Calcium Silicate
C657-93(1998) Standard Test Method for D-C Volume Resistivity of Glass
C658-98 Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
C659-90(1998) Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
C660-81(1999) Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
C661-98 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C662-70(1998) Standard Specification for Impervious Graphite Pipe and Threading
C663-98 Standard Specification for Asbestos-Cement Storm Drain Pipe
C664-87(1999) Standard Test Methods for Thickness of Diffusion Coating
C665-98 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C666-97 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
C667-92(1996)e1 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
C668-98 Standard Specification for Asbestos-Cement Transmission Pipe
C669-00 Standard Specification for Glazing Compounds for Back Bedding and Face Glazing of Metal Sash
C670-96 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
C671-94 Standard Test Method for Critical Dilation of Concrete Specimens Subjected to Freezing
C672/C672M-98 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
C673-97 Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C674-88(1999) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
C675-91(1996) Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
C676-93(1999) Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
C679-87(1997)e1 Standard Test Method for Tack-Free Time of Elastomeric Sealants
C680-89(1995)e1 Standard Practice for Determination of Heat Gain or Loss and the Surface Temperatures of Insulated Pipe and Equipment Systems by the Use of a Computer Program
C681-99 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C682-94 Standard Practice for Evaluation of Frost Resistance of Coarse Aggregates in Air-Entrained Concrete by Critical Dilation Procedures
C684-99 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
C685/C685M-00a Standard Specification for Concrete Made By Volumetric Batching and Continuous Mixing
C686-90(1995)e1 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
C687-96 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
C688-00 Standard Specification for Functional Additions for Use in Hydraulic Cements
C689-93(1997)e1 Standard Test Method for Modulus of Rupture of Unfired Clays
C690-86(1997)e1 Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
C692-00 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C693-93(1998) Standard Test Method for Density of Glass by Buoyancy
C694-90a(2000) Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
C695-91(2000) Standard Test Method for Compressive Strength of Carbon and Graphite
C696-99 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
C697-98 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
C698-98 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
C700-00 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
C702-98 Standard Practice for Reducing Samples of Aggregate to Testing Size
C703-72(1999) Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
C704-99 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C706-98 Standard Specification for Limestone for Animal Feed Use
C709-98 Standard Terminology Relating to Manufactured Carbon and Graphite
C711-93(1997) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C712-93(1997) Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C713-94(1999)e1 Standard Test Method for Slump of an Oil-Base Knife-Grade Channel Glazing Compound
C714-85(2000) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by a Thermal Pulse Method
C715-90(2000) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
C716-00 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C717-01a Standard Terminology of Building Seals and Sealants
C718-93 Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants
C719-93(1998) Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C721-81(1997)e1 Standard Test Method for Average Particle Size of Alumina and Silica Powders by Air Permeability
C722-94 Standard Specification for Chemical-Resistant Resin Monolithic Surfacings
C723-98 Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile
C724-91(2000) Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
C725-90(1998) Standard Specification for Semidense Mineral Fiber Siding
C726-00a Standard Specification for Mineral Fiber Roof Insulation Board
C727-90(1996)e1 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
C728-97 Standard Specification for Perlite Thermal Insulation Board
C729-75(2000) Standard Test Method for Density of Glass by the Sink-Float Comparator
C730-98 Standard Test Method for Knoop Indentation Hardness of Glass
C731-00 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
C732-01 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C734-01 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C735-93(1999) Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
C736-00 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
C737-97 Standard Specification for Limestone for Dusting of Coal Mines
C738-94(1999) Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
C739-00 Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation
C740-97 Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
C741-93(1998) Standard Test Method for Accelerated Aging of Wood Sash Face Glazing Compound
C742-99 Standard Test Method for Degree of Set for Wood Sash Glazing Compound
C743-87(1998) Standard Test Method for Continuity of Porcelain Enamel Coatings
C744-99 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C745-92(1999) Standard Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter
C746-90(1998) Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
C747-93(1998) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
C748-98 Standard Test Method for Rockwell Hardness of Graphite Materials
C749-92(1996) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
C750-89(1997) Standard Specification for Nuclear-Grade Boron Carbide Powder
C752-88(1997) Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
C753-99 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
C754-00 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
C755-97 Standard Practice for Selection of Vapor Retarders for Thermal Insulation
C756-87(1999) Standard Test Method for Cleanability of Surface Finishes
C757-90(1996)e1 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
C758-98 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
C759-98 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
C760-90(1996) Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
C761-96 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
C764-99 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
C765-97(2001)e1 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C767-93(1998) Standard Test Method for Thermal Conductivity of Carbon Refractories
C768-99 Standard Practice for Drip Slag Testing Refractory Materials at High Temperature
C769-98 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus
C770-98 Standard Test Method for Measurement of Glass Stress--Optical Coefficient
C771-97 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
C772-97 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C773-88(1999) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
C774-88(2000) Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
C775-79(1997)e1 Standard Method for Particle-Size Analysis of Whiteware Clays
C776-00 Standard Specification for Sintered Uranium Dioxide Pellets
C777-93(1999) Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
C778-00 Standard Specification for Standard Sand
C779/C779M-00 Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
C780-00 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C781-96 Standard Practice for Testing Graphite and Boronated Graphite Components for High-Temperature Gas-Cooled Nuclear Reactors
C782-99 Standard Test Method for Softness of Preformed Tape Sealants
C783-85(2000) Standard Practice for Core Sampling of Graphite Electrodes
C784-93e1 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
C785-93e1 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
C786-96 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-µm (No. 50), 150-µm (No. 100), and 75-µm (No. 200) Sieves by Wet Methods
C787-96 Standard Specification for Uranium Hexafluoride for Enrichment
C788-98 Standard Specification for Nuclear-Grade Uranyl Nitrate Solution
C791-83(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
C792-93(1998) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C793-91(1997)e1 Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
C794-01 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C795-92(1998)e1 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C796-97 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
C797-99 Terminology for Use of Oil- and Resin-Based Putty and Glazing Compounds
C799-99e1 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
C800-94 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
C801-98 Standard Test Method for Determining the Mechanical Properties of Hardened Concrete Under Triaxial Loads
C802-96 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
C803/C803M-97e1 Standard Test Method for Penetration Resistance of Hardened Concrete
C805-97 Standard Test Method for Rebound Number of Hardened Concrete
C806-95 Standard Test Method for Restrained Expansion of Expansive Cement Mortar
C807-99 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
C808-75(2000) Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
C809-94(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite Pellets
C810-90(2000) Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
C811-98 Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
C813-90(1999) Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
C816-85(1998)e1 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
C821-78(2000) Standard Specification for Lime for Use with Pozzolans
C822-98e1 Standard Terminology Relating to Concrete Pipe and Related Products
C823-00 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
C824-91(2000) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
C825-97 Standard Specification for Precast Concrete Barriers
C827-95a(1997)e1 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens from Cementitious Mixtures
C828-98 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
C829-81(2000) Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
C830-00 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C831-98 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C832-00 Standard Test Method of Measuring the Thermal Expansion and Creep of Refractories Under Load
C833-95a Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets
C834-00e1 Standard Specification for Latex Sealants
C835-00 Standard Test Method for Total Hemispherical Emittance of Surfaces From 20 to 1400oC
C836-00 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
C837-99 Standard Test Method for Methylene Blue Index of Clay
C838-96 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
C839-82(1999) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
C840-01 Standard Specification for Application and Finishing of Gypsum Board
C841-99 Standard Specification for Installation of Interior Lathing and Furring
C842-99 Standard Specification for Application of Interior Gypsum Plaster
C843-99 Standard Specification for Application of Gypsum Veneer Plaster
C844-99 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C845-96 Standard Specification for Expansive Hydraulic Cement
C846-94(1999) Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
C847-95(2000) Standard Specification for Metal Lath
C848-88(1999) Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance
C849-88(1999) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
C852-93(1997) Standard Guide for Design Criteria for Plutonium Gloveboxes
C856-95e1 Standard Practice for Petrographic Examination of Hardened Concrete
C857-95 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
C858-83(1997) Standard Specification for Underground Precast Concrete Utility Structures
C859-92b Standard Terminology Relating to Nuclear Materials
C860-00 Standard Practices for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C861-93(2000) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C862-01 Standard Practice for Preparing Refractory Concrete Specimens by Casting
C863-00 Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C864-99 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C865-91(1995) Standard Practice for Firing Refractory Concrete Specimens
C866-77(1997)e1 Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
C867-94(2000) Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
C868-85(1995)e1 Standard Test Method for Chemical Resistance of Protective Linings
C869-91(1999) Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
C870-96(2000) Standard Practice for Conditioning of Thermal Insulating Materials
C871-95(2000) Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C872-89(1999) Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
C873-99 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
C874-99 Standard Practice for Rotary Slag Testing of Refractory Materials
C875-98 Standard Specification for Asbestos-Cement Conduit
C876-91(1999) Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete
C877M-01 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections [Metric]
C877-01 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C878-95a Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
C879-98 Standard Test Method for Release Papers Used With Preformed Tape Sealants
C880-98 Standard Test Method for Flexural Strength of Dimension Stone
C881-99 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
C882-99 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
C884/C884M-98 Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
C885-87(1997)e1 Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
C886-98 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
C887-79a(1996)e1 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
C888-97 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C889-99 Standard Test Methods for Chemical and Mass Spectrographic Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C890-91(1999)e1 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
C891-90(1997) Standard Practice for Installation of Underground Precast Concrete Utility Structures
C892-00 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
C895-87(1998) Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
C896-99 Standard Terminology Relating to Clay Products
C897-00 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
C898-95 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
C899-79(1997) Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
C900-99 Standard Test Method for Pullout Strength of Hardened Concrete
C901-93a Standard Specification for Prefabricated Masonry Panels
C902-01a Standard Specification for Pedestrian and Light Traffic Paving Brick
C903-98 Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning
C904-01 Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
C905-01 Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C906-00 Standard Test Method for T-Peel Strength of Hot Applied Sealants
C907-98 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C908-00 Standard Test Method for Yield Strength of Preformed Tape Sealants
C909-93(2000) Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C910-93a(1997) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C911-99 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Chemical Uses
C912-93(1997) Standard Practice for Designing a Process for Cleaning Technical Glasses
C913-98 Standard Specification for Precast Concrete Water and Wastewater Structures
C914-95(1999) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C915-79(1995) Standard Specification for Precast Reinforced Concrete Crib Wall Members
C916-85(1996)e1 Standard Specification for Adhesives for Duct Thermal Insulation
C917-98 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
C918-97e1 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
C919-98 Standard Practice for Use of Sealants in Acoustical Applications
C920-01 Standard Specification for Elastomeric Joint Sealants
C921-89(1996) Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C922-00 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C923M-98 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals [Metric]
C923-00 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes and Laterals
C924M-89(1998) Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
C924-89(1997) Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
C925-79(2000) Standard Test Method for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
C926-98a Standard Specification for Application of Portland Cement-Based Plaster
C927-80(1999) Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
C928-00 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
C929-94(2000) Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
C930-99 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
C931/C931M-01 Standard Specification for Exterior Gypsum Soffit Board
C932-98a Standard Specification for Surface-Applied Bonding Agents for Exterior Plastering
C933-96a Standard Specification for Welded Wire Lath
C935-80(1995) Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast
C936-96 Standard Specification for Solid Concrete Interlocking Paving Units
C937-97 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
C938-97 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
C939-97 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
C940-98a Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
C941-96 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
C942-99 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C943-96 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
C944-99 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
C945-81(2000) Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C946-91(1996)e1 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
C947-99 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
C948-81(2000) Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
C949-80(2000) Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
C950-81(2000) Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C952-91(1997)e1 Standard Test Method for Bond Strength of Mortar to Masonry Units
C953-87(1997) Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C954-00 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C955-00a Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
C956-97 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
C957-93(1998) Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
C958-92(2000) Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
C960/C960M-97 Standard Specification for Predecorated Gypsum Board
C961-01 Standard Test Method for Lap Shear Strength of Hot-Applied Sealants
C963-00 Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C964-88(1997) Standard Guide for Lock-Strip Gasket Glazing
C965-96 Standard Practice for Measuring Viscosity of Glass Above the Softening Point
C966-98 Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
C967-87(1996) Standard Specification for Uranium Ore Concentrate
C968-99 Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C969M-94(2000) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
C969-94(2000) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C970-87(1997) Standard Practice for Sampling Special Nuclear Materials in Multi-Container Lots
C972-00 Standard Test Method for Compression-Recovery of Tape Sealant
C973-87(1998) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
C974-87(1998) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C975-87(1998) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C976-90(1996)e1 Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box
C977-00 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
C978-87(1996) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
C979-99 Standard Specification for Pigments for Integrally Colored Concrete
C980-88(2001) Standard Specification for Industrial Chimney Lining Brick
C981-95 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
C982-88(1997)e1 Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems
C985M-00 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe [Metric]
C985-00 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C987-00a Standard Practice for Vapor Attack on Refractories for Furnace Superstructures
C989-99 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
C990M-00 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants [Metric]
C990-00 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C991-00 Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
C992-89(1997) Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
C993-97 Standard Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors
C995-94 Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone
C996-96 Standard Specification for Uranium Hexafluoride Enriched to Less Than 5% 235U1
C998-90(2000) Standard Practice for Sampling Surface Soil for Radionuclides
C999-90(2000) Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
C1000-00 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
C1001-00 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
C1002-00 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1005-00 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
C1006-84(2001) Standard Test Method for Splitting Tensile Strength of Masonry Units
C1007-00 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
C1008-99 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets-Fast Reactor Fuel
C1009-96e1 Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry
C1012-95a Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1014-99ae1 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
C1015-99 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C1016-94a Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
C1017/C1017M-98 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
C1019-00b Standard Test Method for Sampling and Testing Grout
C1021-01 Standard Practice for Laboratories Engaged in the Testing of Building Sealants
C1022-93 Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
C1023-87(1999) Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
C1025-91(2000) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
C1026-87(1996) Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
C1027-99 Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
C1028-96 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
C1029-96 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
C1030-95 Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
C1031-97 Standard Specification for Nuclear-Grade Aluminum Oxide Powder
C1032-96 Standard Specification for Woven Wire Plaster Base
C1033-85(2000) Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically
C1035-85(1995) Standard Specification for Lead and Cadmium Extracted from Glazed Ceramic Cookware
C1036-91(1997) Standard Specification for Flat Glass
C1037-85(1994) Standard Practice for Inspection of Underground Precast Concrete Utility Structures
C1038-95 Standard Test Method for Expansion of Portland Cement Mortar Bars Stored in Water
C1039-85(2000) Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
C1040-93(2000) Standard Test Methods for Density of Unhardened and Hardened Concrete In Place By Nuclear Methods
C1041-85(1995)e1 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
C1042-99 Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear
C1043-97 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1044-98 Standard Practice for Using the Guarded-Hot-Plate Apparatus in the One-Sided Mode to Measure Steady-State Heat Flux and Thermal Transmission Properties
C1045-01 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1046-95(2001) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
C1047-99 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C1048-97b Standard Specification for Heat-Treated Flat Glass--Kind HS, Kind FT Coated and Uncoated Glass
C1049-85(1995)e1 Standard Practice for Installation of Granular Loose-Fill Thermal Insulation
C1052-96 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
C1053-00 Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
C1054-85(1995) Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1055-99 Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
C1057-92(1998)e1 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
C1058-97 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1059-99 Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
C1060-90(1997)e1 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
C1062-00 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
C1063-99 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1064/C1064M-99 Standard Test Method for Temperature of Freshly Mixed Portland Cement Concrete
C1065-93 Standard Specification for Nuclear-Grade Zirconium Oxide Powder
C1066-97 Standard Specification for Nuclear Grade Zirconium Oxide Pellets
C1067-00 Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
C1068-96e1 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
C1069-86(1997)e1 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
C1070-86(1992) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
C1071-00 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
C1072-00a Standard Test Method for Measurement of Masonry Flexural Bond Strength
C1073-97a Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali
C1074-98 Standard Practice for Estimating Concrete Strength by the Maturity Method
C1075-93(1997) Standard Practices for Sampling Uranium-Ore Concentrate
C1076-97 Standard Specification for Nuclear Grade Hafnium Oxide Pellets
C1077-00 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
C1080-98 Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
C1081-98 Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
C1082-98 Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill
C1083-00 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1084-97 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
C1086-96 Standard Specification for Glass Fiber Felt Thermal Insulation
C1087-00 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1088-01 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
C1089-97 Standard Specification for Spun Cast Prestressed Concrete Poles
C1090-96 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens from Hydraulic-Cement Grout
C1091-99 Standard Test Method for Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
C1093-95(2001) Standard Practice for Accreditation of Testing Agencies for Unit Masonry
C1094-01 Standard Guide for Flexible Removable Insulation Covers
C1096-91(1999) Standard Test Method for Determination of Wood Fiber in Asbestos Cement
C1097-95(2001) Standard Specification for Hydrated Lime for Use in Asphaltic-Concrete Mixtures
C1098-93 Standard Specification for Nuclear-Grade Hafnium Oxide Powder
C1099-92(1997) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1100-88(1998) Standard Test Method for Ribbon Thermal Shock Testing of Refractory Materials
C1101/C1101M-00 Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
C1102-94 Standard Test Method for Time of Setting of Portland-Cement Pastes Containing Quick-Setting Accelerating Admixtures for Shotcrete by the Use of Gillmore Needles
C1103M-94(2000) Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
C1103-94(2000) Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C1104/C1104M-95 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1105-95 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
C1106-00 Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
C1107-99 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
C1108-99 Standard Test Method for Plutonium by Controlled-Potential Coulometry
C1109-98 Standard Test Method for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
C1110-88(1997)e1 Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
C1111-98 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1112-99 Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material
C1113-99 Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C1114-00 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1115-00 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1116-00 Standard Specification for Fiber-Reinforced Concrete and Shotcrete
C1117-89(1994) Standard Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance
C1118-89(2000) Standard Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems
C1119-90(1999) Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
C1120-98 Standard Test Method for Wash Test of Asbestos
C1121-90(1999) Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
C1122-90(1999) Standard Test Method for Wet Volume of Asbestos
C1123-90(1999) Standard Test Method for Compressibility and Recovery of Asbestos
C1124-90(1999) Standard Test Method for Kerosene Retention of Asbestos
C1125-89(1999)e1 Standard Test Method for Penetration Index of Asbestos
C1126-00 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
C1127-01 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
C1128-95e1 Standard Guide for Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials
C1129-89(2001) Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
C1130-90(2001) Standard Practice for Calibrating Thin Heat Flux Transducers
C1131-95(2000) Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C1132-95 Standard Practice for Calibration of the Heat Flow Meter Apparatus
C1133-96 Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
C1134-90(2001) Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
C1135-00 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1136-00 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
C1137-97 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
C1138-97 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
C1139-90(1996)e1 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
C1140-98 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
C1141-01 Standard Specification for Admixtures for Shotcrete
C1142-95(2001) Standard Specification for Extended Life Mortar for Unit Masonry
C1144-89(1997) Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms
C1145-01 Standard Terminology of Advanced Ceramics
C1146-96 Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air
C1147-01 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
C1148-92a(1997)e1 Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
C1149-97 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
C1150-96 Standard Test Method for The Break-Off Number of Concrete
C1152/C1152M-97 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
C1153-97 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
C1154-99 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
C1155-95(2001) Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
C1156-95e1 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
C1157-00a Standard Performance Specification for Hydraulic Cement
C1158-97 Standard Practice for Use and Installation of Radiant Barrier Systems (RBS) in Building Construction
C1159-98 Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
C1160-97 Standard Specification for Chemical Resistant Carbon Brick
C1161-94(1996) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1162-90(1999) Standard Test Method for Loose Density of Asbestos
C1163-98 Standard Test Method for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
C1164-92(1997)e1 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
C1165-90(2000)e1 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
C1166-00 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
C1167-96 Standard Specification for Clay Roof Tiles
C1168-01 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
C1169-97 Standard Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance
C1170-91(1998)e1 Standard Test Methods for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
C1171-96 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1172-96e1 Standard Specification for Laminated Architectural Flat Glass
C1173-97 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
C1174-97 Standard Practice for Prediction of the Long-Term Behavior of Waste Package Materials Including Waste Forms Used in the Geologic Disposal of High-Level Nuclear Waste
C1175-99a Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics
C1176-92(1998) Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
C1177/C1177M-99 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
C1178/C1178M-99 Standard Specification for Glass Mat Water-Resistant Gypsum Backing Panel
C1179-91(2000) Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
C1180-00a Standard Terminology of Mortar and Grout for Unit Masonry
C1181-00 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
C1182-91(1995) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
C1183-91(1997) Standard Test Method for Extrusion Rate of Elastomeric Sealants
C1184-00ae1 Standard Specification for Structural Silicone Sealants
C1185-99 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
C1186-99e1 Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets
C1187-91(1999) Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
C1188-91(1997)e1 Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities1
C1189-95 Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors1
C1190-95(2000) Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1193-00 Standard Guide for Use of Joint Sealants
C1194-91(1995) Standard Test Method for Compressive Strength of Architectural Cast Stone
C1195-91(1995) Standard Test Method for Absorption of Architectural Cast Stone
C1196-92(1997) Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
C1197-92(1997) Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
C1198-01 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
C1199-00 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C1201-91(1996) Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1202-97 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
C1203-91(1996) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
C1204-91(1996) Standard Test Method for Uranium in the Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
C1205-97 Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
C1206-91(1996) Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration
C1207-97 Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
C1208/C1208M-00 Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
C1209-01 Standard Terminology of Concrete Masonry Units and Related Units
C1210-96e1 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
C1211-98a Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1212-98 Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
C1214M-94(2000) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method [Metric]
C1214-94(2000) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C1215-92(1997) Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
C1216-92(1997) Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1217-00 Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
C1218/C1218M-99 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
C1219-92(1997) Standard Test Methods for Arsenic in Uranium Hexafluoride
C1220-98 Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
C1221-92(1998) Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
C1222-99 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
C1223-92(1998) Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1224-99 Standard Specification for Reflective Insulation for Building Applications
C1225-00 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates
C1226-93(1998)e1 Standard Test Method for Soluble Chlorides in Asbestos
C1227-00b Standard Specification for Precast Concrete Septic Tanks
C1228-96 Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
C1229-94 Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC)(Wash-Out Test)
C1230-96 Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
C1231/C1231M-00e1 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
C1232-00 Standard Terminology of Masonry
C1233-98 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
C1234-98 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
C1235-99 Standard Test Method for Plutonium by Titanium(III)/Cerium(IV) Titration
C1236-99 Standard Guide for In-Plant Performance Evaluation of Automatic Vehicle SNM Monitors
C1237-99 Standard Guide to In-Plant Performance Evaluation of Hand-Held SNM Monitors
C1238-97 Standard Guide for Installation of Walk-Through Metal Detectors
C1239-00 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
C1240-00e1 Standard Specification for Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete, Mortar, and Grout
C1241-00 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
C1242-00 Standard Guide for Design, Selection, and Installation of Stone Anchors and Anchoring Systems
C1243-93(1999) Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
C1244M-93 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test [Metric]
C1244-93(2000) Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test
C1245-93 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures Point Load Test
C1246-00 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247-98 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248-93(1998) Standard Test Method for Staining of Porous Substrate by Joint Sealants
C1249-93(2000) Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1250-93(1998) Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
C1252-98 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
C1253-93(1998) Standard Test Method for Determining the Outgassing Potential of Sealant Backing
C1254-99 Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
C1255-93(1999) Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
C1256-93(1998)e1 Standard Practice for Interpreting Glass Fracture Surface Features
C1257-94(2000) Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1258-94(2000) Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
C1259-01 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1260-94 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
C1261-98 Standard Specification for Firebox Brick for Residential Fireplaces
C1262-98 Standard Test Method for Evaluating the Freeze-Thaw Durability of Manufactured Concrete Masonry Units and Related Concrete Units
C1263-95(2000) Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
C1264-99 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Board
C1265-94(1999) Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1266-95 Standard Test Method for Flow Characteristics of Preformed Tape Sealants
C1267-00 Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
C1268-94(2000) Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry
C1269-97 Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
C1270-97 Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
C1271-99 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
C1272-00 Standard Specification for Heavy Vehicular Paving Brick
C1273-95a(2000) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1274-00 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
C1275-00 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures
C1276-94(1999) Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
C1277-97 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1278/C1278M-01 Standard Specification for Fiber-Reinforced Gypsum Panel
C1279-00 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
C1280-99 Standard Specification for Application of Gypsum Sheathing
C1281-99 Standard Specification for Preformed Tape Sealants for Glazing Applications
C1282-00 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
C1283-00 Standard Practice for Installing Clay Flue Lining
C1284-94 Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry
C1285-97 Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses: The Product Consistency Test (PCT)
C1286-94 Standard Classification for Advanced Ceramics
C1287-95 Standard Test Method for Determination of Impurities in Uranium Dioxide by Inductively Coupled Plasma Mass Spectrometry
C1288-99 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
C1289-01 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C1290-00 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
C1291-00a Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
C1292-00 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1293-01 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
C1294-01 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1295-98 Standard Test Method for Gamma Energy Emission from Fission Products in Uranium Hexafluoride
C1296-95(2001) Standard Test Method for Determination of Sulfur in Uranium Oxides and Uranyl Nitrate Solutions by X-Ray Fluorescence (XRF)
C1297-95e1 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
C1298-95(2001) Standard Guide for the Design and Construction of Brick Liners for Industrial Chimneys
C1299-99 Standard Guide for Use in Selection of Liquid-Applied Sealants
C1300-95 Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
C1301-95(2001) Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
C1302-95 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
C1303-00 Standard Test Method for Estimating the Long-Term Change in the Thermal Resistance of Unfaced Rigid Closed Cell Plastic Foams by Slicing and Scaling Under Controlled Laboratory Conditions
C1304-95(2001) Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1305-00 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
C1306-00 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
C1307-95 Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
C1308-95 Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
C1309-97 Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
C1310-95(2001) Standard Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass Spectrometry Using Flow Injection Preconcentration
C1311-95 Standard Specification for Solvent Release Sealants
C1312-97 Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
C1313-00 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
C1314-00a Standard Test Method for Compressive Strength of Masonry Prisms
C1315-00 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
C1316-95 Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using a 252
C1318-95(2001) Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
C1319-99 Standard Specification for Concrete Grid Paving Units
C1320-99 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
C1321-98 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
C1322-96a Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
C1323-96 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1324-96 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
C1325-99 Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cement Interior Substrate Sheets
C1326-99 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327-99 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1328-00 Standard Specification for Plastic (Stucco) Cement
C1329-00 Standard Specification for Mortar Cement
C1330-96 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
C1331-96 Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
C1332-01 Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
C1334-96(2000) Standard Specification for Uranium Oxides with a 235U Content of Less Than 5% for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
C1335-96 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C1336-96 Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
C1337-96(2000) Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
C1338-00 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C1339-96a Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
C1341-00 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C1343-96 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-Ray Fluorescence
C1344-97 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
C1345-96 Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry
C1346-96 Standard Practice for Dissolution of UF6 from P-10 Tubes
C1347-96a Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
C1348-01 Standard Specification for Blended Uranium Oxides with a 235U Content of Less Than 5 % for Direct Hydrogen Reduction to Nuclear Grade Uranium Dioxide
C1349-96 Standard Specification for Architectural Flat Glass Clad Polycarbonate
C1350M-96 Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa - s to Approximately 1013 Pa - s) by Beam Bending (Metric)
C1351M-96 Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa-s and 108 Pa-s by Viscous Compression of a Solid Right Cylinder [Metric]
C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
C1353-98 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
C1354-96 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
C1355/C1355M-96 Standard Specification for Glass Fiber Reinforced Gypsum Composites
C1356M-96 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure [Metric]
C1357-98a Standard Test Methods for Evaluating Masonry Bond Strength
C1358-96(2000) Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures
C1359-96(2000) Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Specimens at Elevated Temperatures
C1360-96 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1361-96 Standard Practice for Constant-Amplitude, Axial Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1362-97 Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete
C1363-97 Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus
C1364-97 Standard Specification for Architectural Cast Stone
C1365-98 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
C1366-97 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1367-01 Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear
C1368-01 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
C1369-97 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1370-00 Standard Test Method for Determining the Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
C1371-98 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C1372-01 Standard Specification for Segmental Retaining Wall Units
C1373-98 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
C1374-97 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
C1375-00 Standard Guide for Substrates Used in Testing Building Seals and Sealants
C1376-97 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Glass
C1377-97 Standard Test Method for Calibration of Surface/Stress Measuring Devices
C1378-97 Standard Test Method for Determination of Resistance to Staining
C1379-97 Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry
C1380-97 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
C1381-97 Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
C1382-97 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1383-98a Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
C1384-01 Standard Specification for Admixtures for Masonry Mortars
C1385-98 Standard Practice for Sampling Materials for Shotcrete
C1386-98 Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units
C1387-98 Standard Guide for Determination of Technetium-99 in Soil
C1392-00 Standard Guide for Evaluating Failure of Structural Sealant Glazing
C1393-00a Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
C1394-98 Standard Guide for In-Situ Structural Silicone Glazing Evaluation
C1395/C1395M-98 Specification for Gypsum Ceiling Board
C1396/C1396M-00 Standard Specification for Gypsum Board
C1397-98 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
C1398-98e1 Standard Test Method for Laboratory Determination of the Time Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles
C1399-00 Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
C1400-01 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
C1401-98 Standard Guide for Structural Sealant Glazing
C1402-98 Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
C1403-00 Standard Test Method for Rate of Water Absorption of Masonry Mortars
C1404/C1404M-98 Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
C1405-01a Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
C1407-98 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1408-98 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
C1409-98 Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
C1410-98 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
C1411-01 Standard Practice for the Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
C1413-99 Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
C1414-01 Standard Practice for the Separation of Americium from Plutonium by Ion Exchange
C1415-01 Standard Test Method for 238Pu Isotopic Abundance by Alpha Spectrometry
C1416-99 Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence
C1417M-00 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
C1417-00 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
C1419-99a Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
C1420-99 Standard Guide for Selection, Removal, and Shipment of Manufactured Masonry Units Placed in Usage
C1421-99 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
C1422-99 Standard Specification for Chemically Strengthened Flat Glass
C1423-98 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
C1424-99 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperatures
C1425-99 Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
C1426-99 Standard Practices for Verification and Calibration of Polarimeters
C1427-99a Specification for Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
C1428-99 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
C1429-99 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
C1430-00 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
C1431-99 Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
C1432-99 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
C1433M-00a Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric]
C1433-00a Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
C1435-99 Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
C1436-99 Standard Specification for Materials for Shotcrete
C1437-99 Standard Test Method for Flow of Hydraulic Cement Mortar
C1438-99e1 Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar
C1439-99e1 Standard Test Methods for Polymer-Modified Mortar and Concrete
C1440-99e1 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
C1441-99 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
C1442-99 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1443-99 Standard Specification for Glasses, Portlight, Circular, Fully Tempered
C1444-00 Standard Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders
C1445-99 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
C1446-99 Standard Test Method for Measuring Consistency and Working Time of Self-Flowing Castable Refractories
C1447-99 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
C1448-99 Standard Specification for Non-Asbestos Fiber-Cement Conduit
C1449-99 Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
C1450-99 Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
C1451-99 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source
C1452-00 Standard Specification for Reinforced Autoclaved Aerated Concrete Elements
C1453-00 Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
C1454-00 Standard Guide for Pyrophoricity/Combustibility Testing in Support of Pyrophoricity Analyses of Metallic Uranium Spent Nuclear Fuel
C1455-00 Standard Guide for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
C1456-00 Standard Test Method for the Determination of Uranium or Gadolinium, or Both, in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)
C1457-00 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
C1458-00 Standard Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay
C1459-00 Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
C1460-00 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground
C1461-00 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
C1462-00 Standard Specification for Uranium Metal Enriched to More than 15% and Less Than 20%235 U
C1463-00 Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
C1464-00 Standard Specification for Bent Glass
C1465-00 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
C1466-00 Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
C1467/C1467M-00 Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
C1468-00 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
C1469-00 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature"
C1470-00 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
C1471-00 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
C1472-00 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1473-00 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
C1474-00 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
C1475-00 Standard Guide for Determination of Neptunium-237 in Soil
C1476-00 Standard Test Method for Analysis of Urin for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry
C1477-00 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafloride by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
C1478-00 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes and Laterals
C1479-00e1 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
C1480-00 Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
C1481-00 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1482-00 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
C1483-00 Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
C1484-00 Standard Specification for Vacuum Insulation Panels
C1485-00 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
C1486-00 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
C1487-00 Standard Guide for Remedying Structural Silicone Glazing
C1488-01 Standard Practice for Simulated Aging of Loose-Fill Insulation
C1489-01 Standard Specification for Lime Putty for Structural Purposes
C1490-01 Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
C1491-01 Standard Specification for Concrete Roof Pavers
C1492-01 Standard Specification for Concrete Roof Tile
C1493-01 Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
C1494-01 Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
C1495-01 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
C1497-01 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation