Technical Committees / Committee G02 / Committee Publications

Journal of Testing and Evaluation

• Elements to Improve Galling Resistance Test Results Using the ASTM G98 Method
• Efficient Tool Replacement Procedure Based on Yield Evaluation
• Ranking of Materials’ Erosion Resistance and of Erosion Test Methods’ Intensity by the Transient Response Method
• Erosion Test Evaluation by Noncumulative Mass Loss Data
• Nondestructive Testing for the Integrity Evaluation of Erosive and Abrasive Boundary Layers
• A Method for Evaluating Fretting Wear Scarsqa in Thin Steel Roping Wires Based on Confocalqa Imaging Profilometry
• Shot-Peening Effects on Metal Erosion
• On the Anomaly of Cumulative Erosion and Abrasion-Time Curves
• Investigations of Testing Methodology in Wood Abrasion Tests Promoted with Loose Abrasive Grains
• Evaluation of Alternative Erosion Test Methods
• Application of the ASTM Loop Abrasion Test to Cylindrical Specimens
• Modeling of Cumulative Mass Loss—Time Curves for Six Erosion and Abrasion Test Methods
• An Improved Method for Determination of the Cavitation Erosion Resistance by a Weibull Distribution
• Modeling of Vibratory Cavitation Erosion Test Results by a Weibull Distribution
• Erosive Boundary Layers of Ni 200 in Vibratory Cavitation Erosion Tests
• Review of: Wear Analysis for Engineers
• Static Axial Behavior of Some Typical Restrained Pipe Joints
• Proper Selection of the Stiffness of the Disk Spring Pile Cap in Pile Driving
• Angle of Internal Friction for Pond Ashes
• Condition Monitoring of a Water Hydraulic Cylinder by Vibration Analysis
• Transverse Vibration of a Simply Supported Frustum of a Right Circular Cone
• Repeatability and Reproducibility in Walkway-Safety Tribometry: Abrasive-Grit Size in Test-Foot Preparation
• Evaluation of Wear Resistance of Snow Plow Blade Cutting Edges Using the Scratch Test Method
• Pin-on-Disk Corrosion-Wear Test
• Effect of Vibration as a Cause of Leakage in Aluminum Beer Cans in Palletized Loads
• Symposium on Needs and Applications in Precision Measurement and Monitoring of Wear
• Needs and Challenges in Precision Wear Measurement
• Needs and Applications in Precision Measurement and Monitoring of Wear
• The Nonvibrating Kelvin Probe and Its Application for Monitoring Surface Wear
• The Significance of Nonlinear Motion in the Wear Screening of Orthopaedic Implant Materials
• Precision Profilometry of Wear Scars on Curved Surfaces
• Theory and Application of a Micro-Scale Abrasive Wear Test
• Comparison of Walkway-Safety Tribometers
• The Unlubricated Sliding Wear of Steels: The Contact Conditions in the Sliding Zone
• Influence of Embedded Markers on the Response of the Host Material
• Effects of Finishing Treatments on Fabric Friction
• Introduction to the Symposium on Case Studies of Wear-Related Failure Analyses
• Summary on the Role and Analysis of Wear in Failures
• The Effect of Wet Abrasive Wear on the Tensile Properties of Cotton and Polyester-Cotton Fabrics
• Vibration Levels in Commercial Truck Shipments as a Function of Suspension and Payload
• Vibration Monitoring of Small Lightweight Components Using Fiber Optic Sensors
• Force Plate for Corrugated Container Vibration Tests
• A Pin-on-Drum Abrasive Wear Test and Comparison with Other Pin Tests
• Erosion of Phosphor Bronze under Cavitation Attack in a Mineral Oil
• Erosion by Solid-Particle Impacts: A Testing Update
• Vibratory Cavitation Tests at 200-kPa (2-Bar) Suppression Pressure
• Similarities in Different Experiments of Erosion Caused by Cavitation and Liquid Impingement
• Estimation of Cavitation Erosion with Incubation Periods and Material Properties
• Vibratory Horn Cavitation Erosion Comparisons
• Effects of Temperature on the Behavior of Metals Under Erosion by Particulate Matter
• Erosion and Cavity Characteristics in Rotating Components
• Evaluation of Erosion Resistance of Metallic Materials and the Role of Material Properties in Correlations
• Comments on Erosion Tests Conducted in an ASTM Interlaboratory Test Program
• Studies on the Characteristics of Erosion with Plain Jets and Jets with Cavitation Inducers
• Evaluation of Cushion Dynamic Properties by Impedance Measurements
• Development of a Method to Measure Wear on Resilient Flooring
• Correlating Models and Prediction of Erosion Resistance to Cavitation and Drop Impact
• The Measurement of the Coefficient of Friction of Polymer Pellets Under Extruder Conditions
• Experimental Study of Static and Dynamic Friction Between Sand and Typical Constuction Materials