ASTM International Technical Committee E28 Publications

Technical Committees / Committee E28 / Committee Publications

Journal of Testing and Evaluation

Computation and Uncertainty Evaluation of Offset Yield Strength
Effect of Electrical Discharge Machining (EDM) on Charpy Test Results from Miniaturized Steel Specimens
Computation of Tensile Strain-Hardening Exponents through the Power-Law Relationship
In-Plane Testing Behavior of Adhesive-Bonded Steel Sheets: Influence of Sheet Surface Roughness, Adhesive Thickness, and Bonding Width
Test System for Elevated Temperature Characterization of Thin Metallic Sheets
Effect of Specimen Size on Static Strength and Dynamic Increase Factor of High-Strength Concrete from SHPB Test
Constitutive Equations of Sheet Stamping Steel Based on DIC Measurement
Characterization of Crack Arrest Phenomena in a Modified 9Cr-1Mo Steel
Full-Scale Experimental Research on PE Sheathing of Stay-Cable
ModalCAD—Interactive Dynamic Characteristic Identification Software for Experimental and Operational Modal Analysis of Engineering Structures
Dynamics of a Newly Developed Hydraulic Step Wave Generator
Practical Implications of Instrument Displacement Drift during Force-Controlled Nanoindentation
SignalCAD: A Digital Signal Processing Software for Forced and Ambient Vibration Testing of Engineering Structures
A Synthetic Evaluation and Fuzzy Scheduling Model for Autonomous Test Priority
An Efficient Inverse Method for Identification of the Location and Time History of an Elastic Impact Load
Influence of Loading Rate on the Calibration of Instrumented Charpy Strikers
High-Rate Time-Dependent Displacement Gage for HE Field Tests
Influence of Strain Gage Position on the Static and Dynamic Performance of Instrumented Impact Strikers
Indentation Measurements on Compacted Pharmaceutical Powders: Establishing the Sources of Variation in White Light Interferometer Dent Measurements
Measurement of Very Low Creep Strains: A Review
Instrumented Impact Tests: Effects of Machine Variables and Specimen Position
Research on the Relation Between Magnetic Barkhausen Noise and Ferromagnetic Materials with Different Heat Treatments
Novel Method of Evaluating Dynamic Repeated Measurement Uncertainty
Influence of Friction in Simple Upsetting and Prediction of Hardness Distribution in a Cold Forged Product
A Critical Review of the Diametral Compression Method for Determining the Tensile Strength of Spherical Aggregates
Gearbox Fault Feature Extraction Using Hilbert Transform, S-Transform, and a Statistical Indicator
Validation Of Initial and Failure Stiffness Definitions in Flexure Fatigue Test for Hot Mix Asphalt
Calculation of Stress Fields Near Notch Roots in Real Life Structures Subjected to In-Plane and Out-of-Plane Deformations
Durability Test Analysis in a Passenger Vehicle Damper Spring Tower
Evaluation of Residual Stress in Fiber-Textured Films by X-ray Diffraction
Experimental Stability Analysis of a Test System for Doing Fatigue Tests under Random Loading
Uncertainty in Reference Values for the Charpy V-notch Verification Program
Effects of Available Energy and Impact Rate on Charpy Absorbed Energy in the Upper Shelf
Effects of Laundering on Environmentally-Improved and Classic Denim Fabrics
Slot Machining Effects on Residual Stress Measurements Using the Crack Compliance Method
Effect of Punch Diameter, Grid Dimension, and Lubrication on Forming Limit Diagram
Size Effect in Strain Limits of Medium Strength Steel
On the Calculation of the Elastic Buckling Load of Structures from Experimental Data
Novel Method of Evaluating Residual Stress in Vicinal Welds Based on the Magnetostrictive Technique
Performance Evaluation Test of Automatic Ultrasonic Testing Systems for Welded Joints of Steel Bridges
Effects of Carburizing Treatment on First-Order Correlation between Steel Vickers Hardness and Thermal Diffusivity
Development and Qualification of an Algorithm for the Determination of the Initial Linear Portion of a Force Versus Displacement Record
The Use of an Alternative Method for Fracture Toughness Evaluation on Different Materials
Mechanical Behavior of Polymers PBXW-128 and PBXN-110 Under Uniaxial and Multiaxial Compression at Different Strain Rates and Temperatures
Mechanical Property Evaluation Using the Small Punch Test
Residual Stress Measurement in Ion-Exchanged Glass by Iterated Birefringence and Etching
Residual Stress Measurement and Modeling by the Initial Strain Distribution Method: Part I-Theory
Residual Stress Measurement and Modeling by the Initial Strain Distribution Method: Part II—Application to Cladded Plates with Different Heat Treatments
Characteristics of Macrodeformation Behavior of the Cycling Failure Specimens of a Fe-Cr-Ni Alloy Under In-phase and Out-of-phase Thermomechanical Fatigue
Application of Magnetoelastic Technology to the Measurement of Stresses in Rails for High-Speed Trains
Erratum to Instrumentation and Testing Methodology for Detecting Chloride Contaminants in Soils
Instrumentation and Testing Methodology for Detecting Chloride Contaminants in Soils
A Device for Determination of Thermal Properties of Soil
Quantitative Fabric Drape Evaluation System Using Image Processing Technology (Part 1: Measurement System and Geometric Model)
Development of an Innovative Computer-Controlled Water Deairing System for Hydraulic Testing of Geosynthetics
Determining Residual Stress in Spherical Components: A New Application of the Hole-Drilling Method
Monitoring Fatigue Crack Initiation and Propagation in Cruciform Joints Using Resistance-Type Gages
Study of Frequency Response of Control Components in a Pneumatic System
Influence of Crystallographic Texture on X-ray Residual Stress Measurement for Ti-3wt% Al-2 Vwt% Tube Material
Temperature Effect on Strain Measurement by Using Weldable Electrical Resistance Strain Gages
Application of Acoustic Emission for Measuring Crack Initiation Toughness in Instrumented Charpy Impact Testing
Mechanical Testing of Baseball Bats
Application of Stress Relaxation Test Methodology for Predicting Creep Life of a Large Steam Turbine Rotor Steel (1CrMoV)
Methods for Fatigue Testing Off-Road Bicycle Handlebars Based on Assembly Effects Using Two Different Stem Designs
Economical Creep Testing of Ultrahigh-temperature Alloys
The Wave-in-a-Tube Method for Estimation of Mechanical Properties of Viscoelastic Materials Using Ultrasound
Test Methodology for Strength Testing of Soda-Lime-Silica Float Glass Before and After Enameling
Plastic Instability and Mechanical Anisotropy of Textured Zinc
Evaluation of the Uniaxiality of the Stress State in O-Ring Fracture Strength Specimens
Sensitivity Evaluation of a Disk-type Torque Transducer Used as a Transfer Device
Flexural Characteristics of Sunlight-Aged Polyester Composites: Influence of Processing Variables
Verification of Thin-Wall Ductile Iron Test Methodology
Direct Measurement of Displacement in Instrumented Charpy Impact Testing for Structural Integrity Assessment
The Effects of Residual Stress, Loading, and Crack Geometry on SEPB Fracture Toughness Test Results
A Powerful New Tool for Testing Adhesives In Situ
On the Sensitivity of J Estimation to Materials' Stress-Strain Curves in Fracture Toughness Testing Using the Finite Element Method
A Novel Instrument for Automated Principal Strain Separation in Reflection Photoelasticity
Development of Small Punch Tests for Creep Property Measurement of Tungsten-Alloyed 9%Cr Ferritic Steels
Experimental Study of Residual Stress Distributions in Quenched Parts by the Incremental Large Hole Drilling Method and by the Neutron Diffraction Method
Analysis of Stresses in Spur Gears by the Photoelastic Coating Method
A Low-Temperature Modification to the Charpy Impact Test, with an Example Study of the Fracture Toughness of Mg-12%Li between 4.2 to 77 K
A Simple Catapult System for Studying the Small Projectile Impact Resistance of Various Glass Laminates
Further Evaluation of Automated Stress Corrosion Ring (ASCOR) Testing of Aluminum Alloys
Estimation with a Few Strain Gages of Stress Fields near a Notch Root of Actual Structures Under In-Plane Loading
Observation of the Propagation of Plastic Strain in HSLA 80 Steel
Charpy Impact Verification Data (1994–1996): A Summary
A Potential Optical Standard for Resistance Strain Gages
Thermal Diagnostic Method for Vehicle Brakes
Adhesively Bonded Strain Gages for Extended Use at 315°C on Polymers
A Procedure for Fracture Toughness Testing Using a Chevron-Notched Crack-Arrest Specimen
Influence of X-Radiation on Behavior of Strain Gages
Measurement of Crack Arrest Fracture Toughness of a Ship Steel Plate
Evaluation of the Fracture Toughness of the Deep-Carburized Layer
A Method of Fatigue Testing of Concrete Highway Joint Sealants in Shear
Influence of Corrosion on the Fatigue Properties of Al 7075-T6
Investigation of Welding Effect on Rebars Using Neural Networks
Establishing Mechanical Property Allowables for Metals
A Statistical Evaluation of the Staircase and the ArcSin√P Methods for Determining the Fatigue Limit
Cumulative Fatigue Damage Mechanisms and Quantifying Parameters: A Literature Review
The Shape of Mechanical Hysteresis Loops for Metals Under Harmonic Loading
Design and Performance of an Automated Test Facility for Hot-Compression Testing
Materials Fatigue Life Distribution: A Maximum Entropy Approach
An Automatic Procedure for Evaluation of Young's Modulus of Metallic Materials
A Note on One-Point-Bend Impact Fracture Experiments with Curved Specimens
A Study on the Prediction of Roundness Variation in Honing Using Hone Dynamics
Determination of Tensile Properties at Increased Strain Rates and Various Temperatures
Transverse Vibration of a Simply Supported Beam with Symmetric Overhang of Arbitrary Length
Consensus Values and Reference Values Illustrated by the Charpy Machine Certification Program
Statistical Design of Experiments in Metal Cutting—Part One: Methodology
Statistical Design of Experiments in Metal Cutting—Part Two: Applications
Calibrating Instrument Readings Using a Bivariate Confidence Interval
A Critical Evaluation of the Performance of Optical Fiber Sensors for Monitoring Dynamic Strains
Improved Indentation-Depth Method of Hardness Measurement
Diagnosis of Machinery by Analysis of Running Temperature Data
Determination of the Geometric Profile and Stress/Strain State in the Necked Region During Inelastic Deformation at Elevated Temperatures Using a Non-Contact Measurement Technique
Evolution of the Internal Quality Audit at Ford Motor Company's Central Laboratory
National Institute for Certification in Engineering Technologies Certification: Addressing the Technician Component of Laboratory Quality
Repetitive- and Single-Blow Impact Testing of Wear-Resistant Alloys
Strength Testing of Brittle Materials in Tubular Form Using Elastomeric Inserts
An Evaluation of Three Methods to Measure the Dynamic Elastic Modulus of Steel
Evaluation of the Hall Effect Sensor for Pavement Instrumentation
Relationships between Tensile Stress Relaxation Behavior and Short-Term Elastic Recovery for Linear Low-Density Polyethylenes
A Full Field DC Potential Drop Calibration for an Asymmetrically Cracked M(T) Specimen
Two Parameters Characterizing Superficial Mechanical Features
Charpy Transition Studies of an Embrittled AISI 8640 Lower Bainitic Steel
Numerical Analysis of Plasticity Effects in the Hole-Drilling Residual Stress Measurement
Wear Analysis of Björk Shiley Delrin Tilting Disc Heart Valves
Evaluation of Machinability Data
Stress Correction for Removal of Material in X-Ray Stress Determination
Uniaxial Tensile Strength of Cementitious Composites
Introduction to Workshop on Accuracy of Load and Strain Measurement of Testing Machines
Practical Aspects of Dynamic Verification of Extensometers: Part I—The Concepts
Practical Aspects of Dynamic Verification of Extensometers: Part II—Actual Examples
Measurement Uncertainty Analysis of a Transfer Standard Force Calibration System
Introduction to Workshop on Accuracy of Load and Strain Measurement of Testing Machines
What's New in Traceability
Calibration Techniques for Extensometry: Possible Standards of Strain Measurement
Embrittlement of an AISI 8640 Lower Bainite Steel
Characterization of Defects in Graphite Fiber Based Composite Structures Using the Acoustic Impact Technique (AIT)
Characterization of Hypervelocity Impact Debris: Naval Research Laboratory Tests
Slice Synthesis Technique for an Embedded Crack in Residual Stress Fields
A Novel Method for Imaging the Damage Pattern in Laminated Plastic Materials Subjected to Ballistic Impact
Evaluation of Static and Dynamic Contact Stresses in Simulated Granular Particles Using Strain Gages
Quality Assessment Tests for Nails
An Evaluation of the Impression Test for Estimating the Tensile Properties of Metallic Materials
Comparison of the Fracture Behavior of Conventional Class U Railway Wheels and an Experimental Alloy Wheel
Discussion of “Analysis of the Size Effect in Low-Load Hardness Testing of Metals,” by M. Atkinson
Tensile Stress Relaxation in High-Strength Spring Steel Wire
Field Evaluation of Pavement Instrumentation Methods
Determination of Ductile-Brittle Transition Temperature (DBTT) in Dynamic Small Punch Test
Fatigue Predictions for Components under Biaxial Reversed Loading
Understanding Impact Testing of Pallet Nails and Staples
Static and Impact Flexural Properties of Common Wire Nails
The Influence of Friction on the Compliance and Crack Work Rate of an End Notched Flexure Specimen
Charpy Impact Tests Near Absolute Zero
A Simplified Method for Determining Relaxation Time and Electrical Resistivity from Eddy-Current Decay Measurements
Measuring the Stress Intensity Factor for Propagating Cracks with Strain Gages
Plastic Strain Ratio (r) for Sheet Metal: Effect of Gage Length and Width Measurement Locations Using Reduced Section Specimens
Use of Cantilever Specimens to Determine Microcreep Properties
Measurement of Maximum Arrest Force in Performance Tests of Fall Protection Equipment
Effect of Crystallographic Texture on Flexure Fatigue Properties of Ti-3Al-2.5V Hydraulic Tubing
Bending Strength of Gray Cast Iron
An Encapsulation Technique for Conducting Mechanical Properties Tests of Metallic Specimens in a Controlled Environment without a Retort
Influence of Frequency on the Actual Testing Load of Hydraulic Mechanical Testing Machines
Structure/Property Relationship for Normalized Pipe Flanges (Grade LF2) Made to ASTM Specification A 350/A 350M
X-Ray Residual Stress Measurements in Notched Test Specimens
Design and Development of a Biaxial Strength Testing Device
Strain Gage Analysis of Residual Stress in Plastic Pipes
Evaluation of Singular Intensity Factors in Elastic-Plastic Materials
Effect of Nonmetallic Inclusions on Some Ductility Parameters of Hot-Rolled Steel Sheet
Evaluation of Published Data on Ductile Initiation Fracture Toughness of Low-Alloy Structural Steels
A Microcomputer-Aided Four-Point Bend Test System for Determining Uniaxial Stress-Strain Curves
Investigation of the Influence of Impact Velocity and Temperature on the Dynamic Mechanical Properties of the Material 22 NiMoCr 37
Response to Discussion of: “Determination of Calibration Constants for Hole Drilling Technique Using Special Strain Gage Rosette”
Inelastic Buckling of ASTM Standard E 9 Compression Specimens
Determination of Calibration Constants for Hole Drilling Technique Using Special Strain Gage Rosette
Determination of Modulus of Rigidity by ASTM D 198 Flexural Methods
Improving Bend and Tensile Yield Strengths of Metallic Strip by Reducing the Effects of Residual Stresses
The Effect of Acoustic Impedance on the Apparent Impact Fracture Energy of a Tungsten Base Sintered Alloy
Instrumented Impact Testing of Steel Plate
Preparation of Impact Specimens from Cast Austenitic Manganese Steels
Quantitative Relations Among Measures of Ductility in Planar and Through-Thickness Tension Tests of 12.8-mm-Diameter Specimens
A Pilot Experiment to Determine the Feasibility of Reconstituting Tested Irradiated Charpy V Specimens
On the Yield Loads of Plates with Array of Holes
Mechanical Sampling with Stopped-Belt Accuracy
Confidence Limits of Stress Values Measured by X-Ray Diffraction
Determination of Stress Relaxation by Damping Measurements
Application of Computer Techniques to Charpy Impact Testing of Irradiated Pressure Vessel Steels
A Microcomputer-Based System for Instrumented Impact Testing
Statistical Analysis of X-ray Residual Stress Measurement Using the Half-Width Method
The Effect of Varying Mean Stress on the Dimpled Loaded-Hole Fatigue Strength of 2024-T3 Aluminum Alloy
Rate Sensitive Tensile Impact Properties of Fully and Partially Loaded Unidirectional Composites
Residual Stress Profile in Machined Parts
The Measurement of Absorbed Charpy Impact Energy Using a Vertical Drop Tower
Verification of Compliance Corrections Used in Determining Load-Line Energies from Dynamic Load-Time Data
Simplified Equations for Peak Position and for Its Standard Deviation in X-Ray Stress Measurement
Computer-Controlled Stress Intensity Gradient Technique for High Rate Fatigue Crack Growth Testing
Stress Relaxation in Bending of Copper-Nickel-Tin Alloy Strip Strengthened by Spinodal Decomposition
Isochronous Relaxation Curves for Type 304 Stainless Steel After Monotonic and Cyclic Strain
Design and Performance of a Deadweight Standard Rockwell Hardness Testing Machine
Improvement of Sheet Metal Strength by Localized Thermal Shocks
“PARS”—A Portable X-Ray Analyzer for Residual Stresses
Measuring the Thermal Expansion of Solids with Strain Gages
A Short-Time, High Temperature Mechanical Testing Facility
A Servo-Controlled Hydraulic Hot-Torsion Machine for Hot Working Studies
Three-Point Bending at Large Deflections
A Simple Ductility Tester for Metal Films
Reliability of Whittemore Gage Length Measurements
Alignment Problems in the Tensile Test
Constancy of the Tensile Test Machine Stiffness
Laboratory Compaction Test Methods and Results Compared with Attainable Field Densities on Subbase Materials
Load-Time Attenuation During Instrumented Charpy Impact Testing
Monitoring to Determine the Dynamics of Fatigue Testing
Fracture Criteria for Brittle Materials
Fracture Energy and Crack Tunnelling
X-Ray Residual Stress Calibration Data of Certain Ferrous and Nonferrous Alloys
A Note on the Measurement of Proportional Limit Under Multiaxial Stresses
Production and Economic Consequences When Machining Glass Ceramic
Discussion of “Stress Relaxation in Tension of CA 172 Copper-Beryllium” by R. P. Goel
Closure to “Discussion of ‘Stress Relaxation in Tension of CA 172 Copper-Beryllium’ by P. D. Parikh and Eugene Shapiro” by R. P. Goel
Machining Glass Ceramic in Dry and Wet Environments
A Constant Tensile Stress Creep Testing Machine
Evaluation of Fracture Energy of Aluminum Alloys
New Model Material for Three-Dimensional Stress Analysis
An Analysis of the Design of Beam Testing Apparatus
A New Method for Determination of Proportional Limit and Machine Stiffness
A Study of Crack Tip Plastic Zone Topography in Beryllium
Strength and Ductility of Cr-Mo-V Steels in Creep at Elevated Temperatures
Stress Relaxation in Tension of CA 172 Copper-Beryllium
Distinction Between Coaxial and Noncoaxial Strains in Sheet Metal and Its Implications on the Assessment of Material Formability
A Strain Gage Method for Determining the Mechanical Properties of Filaments
Computer-Aided Interpretation of Stress-Strain Curves
A Critical Assessment of the Cantilever Beam Method for the Determination of Dynamic Young's Modulus
Soil-Stress Gage Design and Evaluation
Strain Measurement Techniques for Fiber Modulus Determination
Stress-Relaxation Characteristics in Tension of High-Strength, High-Conductivity Copper and High Copper Alloy Wires
Comparison of Bending and Tension Tests in Creep of Sheet Metal
Finite Strain and the 0.01 Percent Offset Yield Strength
Fatigue Properties of a Tin-Modified Copper Nickel Alloy (CA-725)
The Influence of a Dispersion on the Ductility and Fracture Behavior of Iron
The Effect of Very Short Time-at-Temperature on the Yield Stress of 6061-T651 Aluminum
Balanced Resonator for Infrasonic Measurements of Young's Modulus and Damping in Flexure