Technical Committees / Committee E08 / Committee Publications

Journal of Testing and Evaluation

• Method for Assessing Applicability of an Artificial Flaw as a Small Initial Crack for Fatigue Limit Evaluation and Its Application to a Drill Hole and an FIB Processed Sharp Notch in Annealed 0.45% Carbon Steel
• A Study on the Fitting Accuracy of CMOD Compliance Equations
• Fracture-Toughness Evaluation in Submerged Arc-Welding Seam Welds in Nonstandard Curved SE(B) Specimens in the Short Radial Direction of API 5L Steel Pipe
• Inhomogeneity Screening Criterion for the ASTM E1921 T₀ Estimate Based on the SINTAP Lower-Tail Methodology
• Multiple-method CTOA Stable Tearing Characterization of Three Metallic Alloys
• Low Cycle Fatigue Experiments on Turbogenerator Steels and a New Method for Defining Confidence Bands
• Middle School Science and Items of High School Entrance Examination: Examining the Gap in Turkey
• Computer-Controlled Stable Crack Growth as a Reliable and Fast Method to Determine Subcritical Crack Growth
• Evaluation of the ASTM and ISO J Initiation Procedures by Applying the Unloading Compliance Technique to Reactor Pressure Vessel Steels
• Fatigue Testing of Traffic Signal Structures Using an Eccentric-Mass Oscillator
• Criteria for Small Scale Creep Testing Condition and Estimation of C_t
• Determining the Slope and Quality of Fit for the Linear Part of a Test Record
• Simulation-Based Maximum Likelihood Median Pragmatic A-Basis and B-Basis Statistical Tolerance Limits Given Fatigue Datum Values with No Censoring or with Potential or Actual Type I Censoring
• Application of Artificial Neural Network for Fatigue Life Prediction under Interspersed Mode-I Spike Overload
• Comparison of Fatigue Crack Propagation Behavior of Al 2024 and Al–Li 8090 Helicopter Fuselage Panels
• Fatigue Crack Growth Rates in Pipeline Steels Using Curved M(T) Specimens
• The Nondestructive Estimation of Mechanical Properties of a Carbon Steel by X-ray Diffraction Peak Broadening
• Crack Mouth Opening Displacement-Based η Factors for SE(B) Specimens
• Crack Size Evaluation Using Unloading Compliance in Single-Specimen Single-Edge-Notched Tension Fracture Toughness Testing
• Development and Preliminary Testing of a Crack Detection Sensor for Crack Velocity Measurement of an Edge-Notched Disk
• Effects of Cycles below the Fatigue Limit on the Life of a High Strength Steel
• Revised Incremental J-Integral Equations for ASTM E1820 Using the Crack Mouth Opening Displacement
• Experimental and Numerical Determination of Mixed Mode Crack Extension Angle
• Evaluating the Onset of Tearing in Elastic-Plastic Fracture Toughness Testing Using In Situ Optical Microscopy
• A Generalized Method for Calculating Strain for a Circular Cross-Section Specimen Subject to Axial Force and Bending
• Development of a Reversible Bending Fatigue Test Bed to Evaluate Bulk Properties Using Sub-Size Specimens
• A Revised Procedure for the Construction of a 3-Parameter JR Resistance Curve and the Determination of Initiation Toughness J0.2
• Determination of the Fatigue Resistance of HVOF Thermal Spray WC-CoCr Coatings by Means of Impact Testing
• Laser Welding Conditions to Improve Tensile Strength and Fatigue Strength of a Lap Joint in Aluminum Alloys
• Experimental Technique for Fully-Reversedqa Low-Cycle Fatigue Testing of Thin Metallic Foils
• Small Specimen Test Techniques for Estimating the Tensile Property Degradation of Modqa 9Cr-1Mo Steel on Thermal Aging
• Development of a Stress Corrosion Cracking Test Methodology Using Tube-shaped Specimens
• Fatigue Prediction of Lightweight Thermoplastic Fiber-Metal Laminates
• Crack Initiation Determination for Three-Point-Bend Specimens
• Stress Intensity Formulas for Three-dimensional Cracks in the Vicinity of an Interface
• Effect of Magnetic Field on Fatigue Crack Propagation of Single-Edge Cracked Soft Ferromagnetic Specimens under Mode I Loading
• A Test Method to Determine Low-Cycle-Fatigue Behavior of Wrinkled Pipe
• Dynamic Fracture-Initiation Toughness ermination of Al 7075-T651 Aluminum Alloy
• Influence of the Calibration Points on the S_pb Parameter Behavior
• Time-Dependent Reliability of Thermally Shocked SiC Tubes
• The Influence of Initial Crack Length on Critical Stress Intensity Factor K₁
• A Two-Parameter Method for Determining the Fracture Toughness of Materials from Subsized Specimens
• Effects of Different Load Schemes on the Fatigue Crack Growth Rate
• Evaluation of the ASTM J Initiation Procedure Using the EURO Fracture Toughness Data Set
• On Measuring Mixed Mode I/III Fracture Toughness of Ductile Materials Using the Critical Stretch Zone Width
• Experimental Determination of Fatigue Crack Closure in 316 (N) Weld Using a Global CMOD Method
• Control of Noise and Specimen Temperature During 1 kHz Fatigue Experiments
• Corrected Procedure for Crack Length Calculation by the Unloading Compliance Technique for Charpy-sized Specimens
• Fracture and Adiabatic Heating of Thick-Section Weldment in Fe-24Cr-15Ni-4Mn-0.32N Stainless Steel with Ni-Base Filler Metals at 4 K
• Theoretical Derivation and Experimental Examination of the Stromeyer Relation for the Analysis of Fatigue Data
• A Model for Mixed-Mode Fatigue
• Fracture and Strength of Ceramic Notched Elements under Compression
• Characteristic Fatigue-Creep Interaction Behavior of an ESR-Cast-to-Shape Gas Turbine Disc Alloy with Coarse Branch Crystals at High Temperature
• Evaluation of Welds Exhibiting Large Scatter in Charpy Toughness Using the Reference Temperature
• An Investigation of Hydraulic Bulging as a Biaxial Straining Test for Sheet Metal
• Fatigue Crack Closure and Crack Growth Following an Overload
• An Energy-Based Crack Extension Formulation for Crack Resistance Characterization of Ductile Materials
• On the Possibility of Avoiding the Use of a Clip Gage When Testing Precracked Charpy-V Specimens in the Ductile-to-Brittle Transition Region
• Numerical Analysis for Small Punch Creep Tests by Finite-Element Method
• Detecting Overload from Strain Information during Fatigue Crack Propagation under Negative Stress Ratio
• The Determination of J_Ic Using the Time-Frequency Analysis Method
• Fracture Toughness of Thin Polymer Films Using Miniature Specimens
• Evaluation of the Mean Plastic Strain Ratio r_m of Metallic Sheets Prestrained Along Different Biaxial Strain Paths
• Fatigue Crack Closure Evaluation Under Constant Amplitude and Spectrum Loading
• Fracture Toughness Testing of Polymers Using Small Compact Specimens and Normalization
• Fatigue-Creep Dynamic Strain Rate Map of a Fe-Ni-Cr Alloy with Coarse Branch Crystals
• Fatigue Performance of Open Drilled Holes with Burrs
• Fatigue Mechanism of Ion-Nitrided Low Carbon Steel
• Liquid-Metal Embrittlement of 7075 Aluminum and 4340 Steel Compact Tension Specimens by Gallium
• Analytical Model for Fatigue Crack Propagation in Concrete
• An Extrapolation Method for Estimating Crack Growth Rate Confidence Intervals from Small Fatigue Crack Data
• Application of a Relativistic Conservation Equation to Crack Initiation
• Dynamic Loading Fracture Tests of Ferritic Steel Using the Direct Current Potential Drop Method
• Fatigue Crack Growth in Cantilever Bending Under Displacement Control
• Determination of the Energy Necessary for Creating Fatigue Cracks by Measurement of Microhardness
• Analysis of a High Rate Round Robin Based on Proposed Annexes to ASTM E 1820
• The Calibration Functions of the Arc-Shaped Bend Specimen
• J-Integral Evaluation of Single-Edge Notched Specimens under Mixed-Mode I/II Loading
• A Finite Element Analysis of the Stress Intensity Resulting from Single-Edge Precracked Beam Loading Conditions
• Low and High Cycle Fatigue Interaction in 316L Stainless Steel
• Cyclic Loading and Creep of Intracranial Aneurysm Clips
• An On-Line Correction Technique of Random Loading with a Real-Time Signal Processor for a Laboratory Fatigue Test
• Low-Cycle Fatigue Characteristics of Precipitation-Hardened Superalloys at Cryogenic Temperatures
• The Influence of Specimen Size on the Fracture Behavior of a Structural Steel at Different Temperatures
• DC Potential Drop Calibration in Creep-Fatigue Loading Conditions
• Evaluation of the Autofrettage Effect on Fatigue Lives of Steel Blocks with Crossbores Using a Statistical and a Strain-Based Method
• Extension and Evaluation of Fatigue Model for Product Shock Fragility Used in Package Design
• The Effect of Load and Crack Misalignment on Stress Intensity Factors for Bend-Type Fracture Toughness Specimens
• A Proposal for Specimen Size Requirements in Toughness Qualification with the Weibull Stress Criterion
• On the Application of the Indirect Compliance Measurement Technique to Flexure Specimens Containing a Chevron Notch
• General Constitutive Relations of Anorthotropic 6061-T6 Aluminum and Its Fatigue Life under Proportional and Non-Proportional Loadings
• Comparison of Finite Element Results and Experimental Measurements of CTOD δ₅ in CT Specimens
• Effect of Crack Front Curvature and Side Grooving on CTOD δ₅ and J-Integral in CT and 3PB Specimens
• Prediction of Permanent Deformation of Asphalt Concrete in Cyclic and Monotonic Loading
• Yield of Inconel 718 by Axial-Torsional Loading at Temperatures up to 649°C
• Prediction of Fatigue Performance of Asphalt Concrete Mixes
• A Method to Determine the Transition Point of Fatigue Crack Growth Rate from Near-ΔK_th to Paris Regions
• On the Determination of JIC Using the Stretch Zone Width Method
• A CTOD Approach to Predicting Crack Extensions in Aluminum Alloys
• Cyclic Response and Fatigue of Steels Subjected to Strain Control with Non-Zero Means
• The Influence of Irregularities in the Crack Shape on the Crack Extension Measurement by Means of the Direct-Current-Potential-Drop Method
• Stress-Strain Behavior of a Fe-Ni-Cr Alloy During In-and Out-of-Phase Synchronized Thermal Cycling and Mechanical Cycling Tests
• Measurement and Interpretation of Fatigue Crack Growth in 7075 Aluminum Alloy Using Acoustic Emission Monitoring
• Effect of Loading Parameters on Post-Overload Fatigue Crack Closure
• Measurement of Fatigue-Creep Dynamic Back Stress and Strain Rate Equation of a Fe-Ni-Cr Alloy
• An H₂-Optimal Control of Random Loading for a Laboratory Fatigue Test
• Experimental Justification for Proposed Changes to the Measurement of K_Ic Using ASTM E 399
• A Computer Program to Aid in Fatigue Precracking of Fracture Toughness Test Specimens
• Fatigue Crack Propagation Threshold: What Is It and How Is It Measured?
• On the Determination of Fracture Energy Using the Peel Test
• A Tapered Double-Cantilever-Beam Specimen Designed for Constant-K Testing at Elevated Temperatures
• Determination of η_pl Factor: Influence of Side Grooving
• Application of Analysis of Variance (ANOVA) Statistical Methods to Breaking Load Corrosion Test
• Fatigue Testing of Microspecimens from a Weldment
• Fatigue and Creep Crack Growth in Fine Sand Asphalt Materials
• Strain-Controlled Cumulative Fatigue with Mean Strains and High-Cycle and Low-Cycle Interaction
• Mixed Mode Fiber Pull-Out Equipment: Applications and Results
• Analysis of Fatigue Data with Runouts Based on a Model with Nonconstant Standard Deviation and a Fatigue Limit Parameter
• A Modified Normalization Method for Developing J-R and CTOD-R Curves with the LMN Function
• Estimating Creep Rates During Tensile Cyclic Loading
• Elastic Compliance of the Compact Tension Specimen Comprising Two Linear-Elastic Materials Bonded with a Thin Layer
• High Resolution R-Curve Characterization of the Fracture Toughness of Thin Sheet Aluminum Alloys
• Creep Rupture Investigation of 63Sn-37Pb Solder by Experiments and Damage Mechanics
• Optimal Design of a Disk-Shaped Specimen for Biaxial-Tensile Fatigue Testing
• A Fracture Test Method for Mode I Fracture Of Thin Metal Materials
• Creep Testing of Steels at Very High Temperatures
• Fatigue Under Stress Cycling With Nonzero Means
• Fracture Mechanics Expressions for the Standard Chord-Supported Arc Bend Specimen
• Fracture Toughness of Unalloyed Austempered Ductile Cast Iron (ADI)
• Mixed Mode Stress Intensity Calibrations for an Angled Crack Bend Specimen
• Development of a Dynamic Load-Deflection Apparatus for Elastomeric Materials
• A Modified Miniature Disk Test for Determining Material Mechanical Properties
• A Consideration of Evaluation of Fatigue Crack Propagation Rate from Effective Stress Intensity Factor Range
• Calibration of DC Potential Technique Using an Optical Image Processing System in LCF Testing
• Crack Initiation Fracture Toughness of Transmission Line Hardware Steels
• A Study of the Fatigue Softening and Hardening of Steel by the Magnetoelastic Effect Method
• Elastic Compliance of Four-Point Bend Specimens Comprising Two Linear-Elastic Materials Bonded with a Thin Layer
• Dynamic Fracture Toughness (DFT) of Banded HSLA Steels
• A Method for Generating Fatigue Marker Bands Using a Constant K_max Test Procedure
• Fracture Toughness by Small Punch Testing
• Inconsistencies between CTOD and J Calculations
• Back Face Strain Calibration for Crack Length Measurements
• The Determination of Single Edge-Notched Bend Specimen Load Line Displacement from Remotely Located Sensors in Elastic-Plastic Fracture Testing
• Effects of Load-Distributed Width on Split Tension of Unnotched and Notched Cylindrical Specimens
• Fatigue Testing of High-density Polyethylene and Polycarbonate with Crack Length Measurement Using Image Processing Techniques
• The Influence of Testing Methodology on the Fatigue Crack Propagation Behavior of Cellulose Esters
• Effect of Overload Cycles on Thin Steel Roof Claddings during Cyclonic Winds
• Determining the Potential Drop Calibration of a Fatigue Crack Growth Specimen Subject to Limited Experimental Observations
• A Fractographic Technique for the Estimation of Initiation Fracture Toughness J_Ic for Ductile Materials
• Deducing Crack History in an Aged Boiler Tube from Fracture Surface Topography
• Instructions for a New Method of Inclusion Rating and Correlations with the Fatigue Limit
• A Suggested Test Procedure to Measure Mixed Mode I–III Fracture Toughness of Brittle Materials
• Prediction of Fatigue Life of Plain Concrete Beams from Fracture Tests
• Numerical Model of Primary Creep Deformation in a Novel Double Shear Specimen
• Fatigue Crack Propagation in a Specimen with a Complicated Cross-Section; Characterization of the Stress Intensity Factor
• The Use of Fatigue Specimens Precracked in Compression for Measuring Threshold Values and Crack Growth
• Dynamic Fracture Toughness Measurements on Small Charpy Specimens—A Preliminary Study
• R-Curve Generation and CTOD Evaluation Considering Maximum Crack Growth Size and Parabolic Crack Front
• Crack Length and J-Integral Expressions for Specimens Loaded in Tension
• Maximum-Load Predictions in the Dugdale Model Using a Critical CTOA Criterion
• A Detection Method of Fatigue Crack Initiation by Analyzing Strain Waveform
• Influence of Substrate Deformations on the Thermal Fatigue Life of SMT Solder Joints
• An Advanced Control Concept and Algorithm for Long-Term Data Acquisition in High-Temperature Fracture Mechanics Tests
• Some Microstructural Conditions for Evaluating Fracture Toughness and R-Curve Behavior in Platelet-Reinforced Composites
• Fatigue Crack Initiation in Nonferrous Materials: A Model Assessment
• J and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens
• Initiation and Stable Crack Growth Behavior of API X70 Steel at Low Temperatures (25°C ≥ T ≥ −95°C)
• Introduction of a New Dynamic Fracture Toughness Evaluation System
• The Design of a Control System for a Superimposed Frequency Fatigue Test Machine
• Axial-Torsional Fatigue: A Study of Tubular Specimen Thickness Effects
• The Gel Electrode Revisited: Fatigue Crack Detection with a Polymer Film
• Fatigue and Corrosion Fatigue of Beryllium-Copper Spring Materials
• Minimization and Quantification of Error Associated with the K Gradient and the Interval of Crack Length Measurement in Fatigue Crack Growth Testing
• Monitoring Fatigue Crack Propagation in Compact Tension Specimens via Remote Sensing of Back Face Strain
• Calculation for Rolling Contact Fatigue Life and Strength of Case-Hardened Gear Materials by Computer
• Crack Initiation and Total Fatigue Life of a Carbon Steel in Vacuum and Air
• Residual Stresses and Fatigue Precracking Techniques for Weldment Fracture Toughness Specimens
• Effects of Notch Length on the Ductile Fracture of a Center-Notched Low Carbon Steel Plate
• The Use of Small Punch (Bulge) Tests to Estimate Fracture Stress in the Lower Shelf Regime
• Notch Dimensions for Three-Point Bend Fracture Specimens Based on Compliance Analyses
• Fracture Toughness Determination Related to Indentation Problems Avoidance in Three-Point Bend Specimens
• On the Intrinsic Character of the Stress-Strain Curve of a Prestressing Steel
• A Method for Estimation of the Radius of Elastic-Plastic Boundary Around Cold-Worked Holes
• Analysis of Elastic and Plastic Strains for Internally Pressurized Cylinders
• New Formulae for Determining Fracture Toughness of a Wide Range of Different Materials with Chevron-Notched Short-Rod and Short-Bar Specimens
• Charpy Absorbed Energy and J_Ic as Measures of Cryogenic Fracture Toughness
• Fatigue Threshold Regime of a Low Alloy Ferritic Steel under Closure-Free Testing Conditions: Part I—Compliance Variations in the Threshold Regime
• Fatigue Threshold Regime of a Low Alloy Ferritic Steel under Closure-Free Testing Conditions: Part II—Hysteresis in Near-Threshold Fatigue Crack Propagation: An Experimental Assessment
• Fatigue Behavior of (BS 1470 N8-0) Aluminum Alloy and (BS 1501–510) Nickel Steel Double-Fillet and Tee-Butt Welds (Subject to Bending)
• Critical Assessment of Methods for J_Ic Determination
• An Apparatus for Biaxial Strength Testing of Standard Tensile Specimens
• An Efficient Algorithm to Characterize Stress-Strain Data Using Piecewise Linear Curves
• Crack Tip Opening Displacement (CTOD) Toughness Evaluation by ASTM E 1290 and BS5762: A Comparative Analysis
• Finite Element Method (FEM) Analysis of Elastic-Linear-Hardening Materials and Comparison with Measurements on Commercial Materials
• Evaluation of Elastic Stress Intensity Using J-Integral Specimen Geometries
• Methods of Determining Subcritical Crack Growth by Static Lifetime Tests with Natural and Artificial Cracks
• Thermal Shock and Thermal Fatigue Testing
• Normalization Method for Developing J-R Curves with the LMN Function
• Energy Stored in a Specimen under Fatigue Limit Loading Conditions
• Effect of Thickness on Elasto-Plastic Deformation and Hysteretic Energy Dissipated at Crack Tip
• Effects of Microcracks and Artificial Surface Cracks on Fracture Ductility of a Torsional Prestrained Specimen
• Prediction of Fatigue Life of Asphalt Concrete Beams from Fracture Tests
• Shear Strength of a Ductile Material from Torsion of Solid Cylinders
• Theoretical Comparison of Error in K_Ic Values Determined by Different Testing Methods of Ceramics
• Specimen Size Requirements for Fracture Toughness Testing in the Transition Region
• Plastic η and γ Factors for Compact Tension Specimen in J-Integral Estimation
• Deformation of Aluminum Alloy under Cyclic Creep Loadings
• Improved Wide Range Expressions for Displacements and Inverse Displacements for Standard Fracture Toughness Specimens
• Characterization of the Effects of Large Unloading Cycles on the Ductile Tearing Toughness of HSLA Steel
• Probability, Confidence, and Sample Size in Fatigue Testing
• A Quality Control Test for Selecting Materials to Arrest Fast-Running, Full-Thickness Cracks
• Changes in Cotton Fabric Bending Properties As a Result of Laboratory Wear
• Introduction to Symposium on Quantitative Methods in the Assessment of Structural Defects
• Durability Assessment Based on Initial Material Quality
• A Rapid Method for Measurement of Rolling Contact Fatigue Limit of Case-Hardened Gear Materials
• Discussion of “Chevron-Notched Specimens for Fracture Toughness Measurements Independent of R-Curve Effects,” with Author's Closure
• Fatigue Behavior of a Cold-Rolled SAE Grade 945X HSLA Steel
• Stress Intensity Factors for Side-Grooved Fracture Specimens
• J_Ic Data Analysis Methods with a “Negative Crack Growth” Correction Procedure
• Estimation of Characteristic Values of Fracture Toughness
• Cyclic Stress-Strain Behavior and Low Cycle Fatigue of Ti 6242
• Influence of Overload Plastic Zone Size on Stress Corrosion Crack Growth Behavior of a Low Alloy Steel in 3.0% NaCl Solution
• Elasto-Plastic Fracture Characterization of Paving Materials at Low Temperatures
• A Suggested Procedure for Combined Mode I — Mode III Fracture Toughness Testing
• The Linearity of Clip Gages Used in Fracture Mechanics Tests
• Applicability of Modified J as a Fracture Parameter for Polycarbonate
• Estimation of the Ct Parameter: Experimental Implications
• Dynamic K Measurements in Three-Point-Bend Specimens
• Effect of Compressive Underloads and Tensile Overloads on Fatigue Damage Accumulation in 2024-T351 Aluminum
• The Use of Miniaturized Tests to Predict Flow Properties and Estimate Fracture Toughness in Deformed Steel Plates
• Rotation Corrections in Three-Point Single Edge Notch Bend Specimens
• A Method to Obtain Ideal Fatigue Crack Propagation for Steels
• A Linear Short-Lever Extensometer
• Fatigue Performance of AISI 1140 Modified Steel
• Fractography of AISI 1140 Modified Steel under Static and Cyclic Loading Conditions
• Regression Analysis of Single Specimen Fracture Toughness Data with Serially Correlated Errors
• Determination of the Loading Rate Needed to Obtain Environmentally Assisted Cracking in Rising Load Tests
• Low-Cycle Fatigue Analysis of Notched Members
• Chevron-Notched Specimens for Fracture Toughness Measurements Independent of R-Curve Effects
• Proposed Standard Arc-Bend Chord-Support Fracture Toughness Specimens and K Expressions
• Designing Bearing Fatigue Life Tests for Improving the Use of Testing Resources
• Fatigue of Submerged Concrete under Low-Cycle, High-Magnitude Loads
• Sensitivity of Fatigue Crack Growth Prediction (Using Wheeler Retardation) to Data Representation
• Comparison of Chevron-Notched Specimen Types for Fracture Toughness Testing of Aluminum
• Effects of Small Surface Cracks on Ductility Loss in Low Cycle Fatigue of 70/30 Brass
• Fatigue Crack Propagation Threshold
• A Model to Predict the Sources and Magnitude of Scatter in Toughness Data in the Transition Region
• Linear-Elastic Fracture of High-Nitrogen Austenitic Stainless Steels at Liquid Helium Temperature
• Statistical Design of Fatigue Crack Growth Test Programs
• Plastic Rotation Factors of Three-Point Bend and Compact Tension Specimens
• A Direct J-R Curve Analysis of Fracture Toughness Tests
• Evaluation of Creep Rupture Behavior of 1Cr-1Mo-0.25V Steel with 0.04 wt% Sn
• Strain-Hardening Characteristics of Aluminum-1050A, α-(70/30) Brass, and Austenitic Stainless Steel under Biaxial Loading
• Evaluation Procedure for Low Cycle Fatigue Data
• Indirect Measurements of Compliances in Four-Point-Bending Tests
• Comparison of Compliance Results for the Wedge-Loaded Compact Specimen
• An Analysis of Notch-Size Effects at the Fatigue Limit
• Prediction of Specimen Strain from Extensometer Deflection Measurements in a Direct Stress Fatigue Test Specimen under Static Tensile Loading
• Crack Length Measurement During Rapid Crack Growth Using an Alternating-Current Potential Difference Method
• Effect of Prestrain on Fracture Toughness of Rolled Mild Steel with Significant Inclusion Content
• Fatigue Life Prediction in Flexural Bending of Hollow Cross-Sectional Bars from Axial Fatigue Information
• Development of a Miniaturized Specimen Technique for Fracture Toughness J_Ic Measurement
• Evaluation of Notch Tip Opening Displacement Using a Composite Crack Profile Approach
• Determination of Material Characteristic Values in Elastic-Plastic Fracture Mechanics by Means of J-Integral Crack Resistance Curves
• On the Analysis of Thermally Activated Tension-Tension Cyclic Deformation Behavior
• A Cleavage Precracking Technique for Sheet Steel Fracture Specimens
• Determination of K_c and Residual Strength Values for Sheet Materials
• Load-Point Compliance of a Three-Point Loaded Cracked-Notched Beam
• Near-Threshold Fatigue Crack Growth Behavior for 316 Stainless Steel
• J-Integral Testing of Aluminum Alloys: A New Technique for Marking Crack Fronts
• Results of an Interlaboratory Fatigue Test Program Conducted on Alloy 800H at Room and Elevated Temperatures
• A Simple Method for Fatigue Precracking Specimens for Fracture Mechanics Tests
• Equivalent Crack Lengths in Thin Sheet Materials Subjected to Tensile Loads
• Effects of the Average Increment ΔC on the Scatter in da/dN Data and Mean Life Cycles in HY-80 Steel Plate
• Characterization of Fracture Behavior in Small Punch Test by Combined Recrystallization-Etch Method and Rigid Plastic Analysis
• Interlaboratory Evaluation of K_Iscc and da/dt Determination Procedures for High-Strength Steels
• Cyclic Stress and Diametral Strain Response During High Strain Amplitude Fatigue of a 1Cr-1.3Mo-0.3V Bainitic Rotor Steel at Elevated Temperature—Part II
• On the Determination of Crack Initiation Using Standard Test Methods
• A Computerized Test System for Thermal-Mechanical Fatigue Crack Growth
• A Method for Determining Conservative Fatigue Threshold While Avoiding Crack Closure
• Linear Elastic Fracture Mechanics Applied to an Adhesive Spar—Wingskin Joint
• Investigation of Dynamic J_Id for Alloy Steel Weldments Using the Split Hopkinson Bar
• Poisson's Ratio As Determined for Elastic and Plastic Deformation and for Monotonic and Cyclic Loading—Part I: Critical Review
• An Evaluation of Dynamic Fracture Toughness of Type A508 Class 3 Steel
• R-Curve Round-Robin Program for ASTM Recommended Practice for R-Curve Determination (E 561)
• Development of a Constant-K Specimen for Materials Testing
• Evaluation of Plane-Stress Fracture Testing Methods
• Fatigue Crack Growth Threshold and Crack Opening of a Mild Steel
• A Personal Computer Based Thermal-Mechanical Fatigue Test System
• References and Conference Proceedings Towards the Understanding of Fracture Mechanics
• Determination of Fracture Toughness for Brittle Nonmetallic Materials at the Subcritical Crack Growth Stage
• Fracture Mechanics Evaluation of Irradiation Embrittlement in Reactor Vessel Steels Based on the Rate Process Concept
• Determination of Fracture Toughness by CTOD Resistance Curve Method
• Estimation of Fatigue Life at Elevated Temperature of Electron Beam Weldments of Alloy 718
• Methodology for Correlating Fatigue Data Obtained under Different Test Conditions
• Effect of Dither on Strain-Controlled Fatigue and Tensile Results Obtained with a Closed-Loop Servohydraulic Testing Machine
• A New Method for In Situ Compliance Measurements for Fatigue Crack Growth Testing in Autoclaves
• Effect of R_ε on Cyclic Stress-Strain Behavior of Inconel 718
• Determination of the Critical Value of the J-Integral at High Loading Rates Using the Wedge-Loaded Specimen
• Interlaboratory Study of Strain-Cycle Fatigue of 1.2-mm-Thick Sheet Specimens
• A Thermal Control System for Thermal Cycling
• Optimization of the Gel Electrode for Repeatable Imaging of Fatigue Cracks in Aluminum Alloys
• Plastic Strain Arising from Fatigue Crack Initiation
• Stress Intensity Factors for Notched Configurations
• Creep and Rupture Tests of Alloy A-286 at Elevated Temperatures
• Design and Performance of a Ring-Shaped Clip Gage for Fracture Mechanics Testing
• Effect of Size on Elastic-Plastic Fracture Toughness Parameters
• Effect of Crack-Tip Morphology on Cleavage-Crack Extension
• Determination of Crack Growth Parameter N in Ceramics Under Creep Conditions
• Fracture Toughness of Hot-Pressed Beryllium
• Task Group Report: Results of the Interlaboratory Test Program to Determine Percent Shear of Dynamic Tear Test Specimens
• A Method for the Defined Fatigue Precracking of Round Notched Bars
• An Optical Test Method for Measuring Biaxial Deformations
• Single Specimen Fracture Toughness Testing of Low Strength Steel Plate Using The Direct Current Electrical Potential Method
• Determination of Fracture Toughness of a Material That Exhibits Pop-In Behavior
• Determination of Fracture Toughness J_Ic Under Quasi-Static and Dynamic Loading Conditions Using Wedge Loaded Specimens
• Fatigue Crack Growth Life Prediction for a Bolthole Specimen Under Constant Amplitude Loading
• A Report on the Workshop on High Temperature Crack Growth and Fracture
• Techniques for Determination of the Crystallographic Characteristics of Environmentally Induced Brittle Fractures
• Discussion of “On the Quantitative Analysis of Fatigue Crack Propagation” by A. J. McEvily
• Fitting of Fatigue Curves with Nonconstant Standard Deviation to Data with Runouts
• Development of a Test Setup for Measuring the Deflection of Single-Edge Notched Bend (SENB) Specimens
• Analysis of an Internally Radially Cracked Ring Segment Subject to Three-Point Radial Loading
• A New Method for the Determination of the Critical Value of Crack Tip Opening Displacement at the Initiation of Crack Growth Using a Single Three-Point Bend Specimen
• Summary Report of Round Robin Testing by the ASTM Task Group E24.01.06 on Rapid Loading Plane-Strain Fracture Toughness K_Ic Testing
• Numerical Analysis of Ductile Fracture Experiments Using Single-Edge Notched Tension Specimens
• Stressing for Test Purposes of Materials in Tubular Form Using Elastomeric Inserts—Practical Testing Procedures
• An Improved Method for Threshold Fatigue Crack Propagation Testing on an Electromagnetic Resonance Type Machine
• A New Transducer to Monitor Fatigue Crack Propagation
• J_Ic Measurement Point Determination for HY130, CMS-9, and Inconel Alloy 718
• Accuracy and Precision of Crack Length Measurements Using a Compliance Technique
• High Pressure Fatigue Testing with Results for Tubing and Fittings
• Review of the Effects of Fatigue Cracking Loads on Plane Strain Fracture Toughness
• Fatigue Crack Front Shape and Its Effect on Fracture Toughness Measurements
• Effects of Temperature on the Fracture Toughness of Carburizing Steels for High-Temperature Applications
• In-Plane Compression: A New Laboratory Forming Technique to Study the Effect of Large Drawing Deformations in Sheets on Their Subsequent Mechanical Behavior
• A Summary of Fracture Mechanics Concepts
• Cyclic Stress-Strain and Fatigue Properties of Sheet Steel as Affected by Load Spectra
• Fracture Mechanics Analysis of the Effects of Residual Stress on Fatigue Life
• Tentative Test Procedure For Determining the Plane Strain J_I-R Curve
• Evaluation of the Tentative J_I-R Curve Testing Procedure by Round Robin Tests of HY130 Steel
• Fracture Testing in High Temperature and Pressure Hydrogen Environments
• Dynamic Fracture Toughness and Fatigue Crack Growth Rate Properties of ASME SA508 CL 3 and SA508 CL 3a Base and Heat-Affected-Zone Materials
• The Effect of Self Stresses on High Cycle Fatigue
• A Constant Stress Tensile Creep Machine for Very Low Stresses
• A Compressive Creep Machine
• Correlation of Data from Standard and Precracked Charpy Specimens with Fracture Toughness Data for HY-130, A517-F, and HY-80 Steel
• Techniques for Fatigue Testing and Extrapolation of Fatigue Life for Austenitic Stainless Steels
• Discussion of “Statistical Fatigue Failure Analysis” by G. G. Trantina
• Closure to “Discussion of ‘Statistical Fatigue Failure Analysis’ by W. N. Findley” by G. G. Trantina
• Fatigue Crack Growth Rate Data Acquisition System for Linear and Nonlinear Fracture Mechanics Applications
• Determination of Crack Tip Energy Dissipation and Elastic-Plastic Fracture Toughness Parameter with Ductile Crack Extension
• An Evaluation of a Load-Line Extensometer for Elastic-Plastic Fracture Toughness Testing
• A Constant Force System for Delayed Fracture Experiments
• Crack Initiation, Slow Crack Growth, and Unstable Propagation of Ductile Fracture in Mild Steels in a Laboratory Experiment
• R Curve and Fracture Toughness of Thin Sheet Materials
• Some Aspects of Fatigue Crack Closure in Two Contrasting Titanium Alloys
• A Biaxial Fatigue Machine for Elevated Temperature Testing
• The Effects of Stress Dwells and Varying Mean Strain on Crack Growth During Thermal Mechanical Fatigue
• Stress Intensity Factors for Single-Edge-Crack Solid and Hollow Round Bars Loaded in Tension
• Multiaxial Fatigue: A Survey of the State of the Art
• Precision Strain Measurement at Elevated Temperatures Using a Capacitance Probe
• Application of the Electrical Potential Method to Crack Length Measurements Using Johnson's Formula
• Comparison of Methods for Fracture Toughness Determination in Steels
• On the Relationship of Toughness, Fracture Initiation Energy, and Specimen Deflection in Charpy Tests of 4340 Steel
• A Fracture Toughness Data Bank
• An Optimal Method for Determining Anisotropic Parameters Under Combined Stress Tests
• Task Group Report: Results of Interlaboratory Test Programs to Evaluate the Dynamic Tear Test Method
• Discussion of “Effects of Stress Ratio on Fatigue Crack Growth Rates in X70 Pipeline Steel in Air and Saltwater” by Oldrich Vosikovsky
• Review of New Developments in Crack Propagation Studies
• Chevron V-Notched Bend Specimen for K_Ic Measurement of Brittle Materials
• On the Relationship Between Stretch Zone Formation and the J Integral for High Strain-Hardening Materials
• Fatigue Life Prediction of Welded Components Based on Fracture Mechanics
• A Proposed Standard Round Compact Specimen for Plane Strain Fracture Toughness Testing
• A Wide Range Stress Intensity Factor Expression for the C-Shaped Specimen
• Vibrations in Compact Specimens During Crack Arrest Testing
• Evaluation of the J_Ic Testing Procedure by Round Robin Tests on A533B Class 1 Pressure Vessel Steel
• Results of an ASTM Cooperative Test Program on the J_Ic Determination of HY130 Steel
• Measuring J_Ic, and the Resistance to Crack Growth After Initiation
• Generalized Application of Neuber's Rule
• Performance of Chevron-Notch Short Bar Specimen in Determining the Fracture Toughness of Silicon Nitride and Aluminum Oxide
• Evaluation of the Three-Component Model for Representing Wide-Range Fatigue Crack Growth Rate Data
• Comparisons of Fracture Toughness Measurements by the Short Rod and ASTM Standard Method of Test for Plane-Strain Fracture Toughness of Metallic Materials (E 399-78)
• A Single Specimen Determination of J_Ic for Different Alloy Steels
• Effects of Stress Ratio on Fatigue Crack Growth Rates in X70 Pipeline Steel in Air and Saltwater
• A Compact Specimen for Plane Strain Crack Arrest Toughness Testing
• A Hydrostatic Stress-Sensitive Relationship for Fatigue Under Biaxial Stress Conditions
• The Development of a Closed-Loop, Servo-Hydraulic Test System for Direct Stress Monotonic and Cyclic Crack Propagation Studies Under Biaxial Loading
• Determination of the Fracture-Energy Criterion J_Ic of Two Steels by Static and Dynamic Testing
• Fitting Curves to Toughness Data
• Evaluation of the J Integral for the Compact Specimen
• Relationships Between Low-Cycle Fatigue and Fatigue Crack Growth Rate Properties
• A Low-Cycle Fatigue Test for Pipe-Type Power Transmission Cables
• Stress-Strain Characteristics of Reinforcing Steel Bars Under Cyclic Loading
• Optimization of the Electrical Potential Technique for Crack Growth Monitoring in Compact Test Pieces Using Finite Element Analysis
• Environmental Testing Under Random Loading
• A Tower Extensometer
• A Simple and Sensitive Method of Monitoring Crack and Load in Compact Fracture Mechanics Specimens Using Strain Gages
• The Influence of Bulk-Solution-Chemistry Conditions on Marine Corrosion Fatigue Crack Growth Rate
• Use of the Double Torsion Method to Study Crack Propagation in an Adhesive Layer
• Three-Point Bending at Large Deflections of Beams with Different Moduli of Elasticity in Tension and Compression
• Application of Fatigue Life Prediction Techniques to Materials Substitution
• A Correlative Study Between Analysis and Experiment on the Fracture Behavior of Graphite/Epoxy Composites
• Constant and Variable Amplitude Fatigue Behavior of Eight Steels
• Strain Criteria for Fatigue Fracture of Metals at High-Cycle Loading
• Effect of Measurement Precision and Data Processing Procedures on Variability in Fatigue Crack Growth Rate Data
• Statistical Analysis of Notch Toughness Data
• A New Fixture for Fatigue Testing
• Compliance Correction for Determining Load-Line Energies for Compact Fracture Toughness Specimens
• A Procedure for the Determination of Ductile Fracture Toughness Values Using J Integral Techniques
• Fracture Toughness Evaluation of Polymers with Surface-Crack Specimens
• Influence of Material Property Variations on the Assessment of Structural Integrity of Nuclear Components
• Cooperative Plane Strain Fracture Toughness Tests with C-Shaped Specimens
• A Summary and Comparison of J Estimation Procedures
• The Effect of Interference on the Dimpled, Loaded-Hole Fatigue Strength of 2024-T3 Alclad® Aluminum Alloy
• Computer-Controlled Decreasing Stress Intensity Technique for Low Rate Fatigue Crack Growth Testing
• Frequency, Stress Ratio, and Potential Effects on Fatigue Crack Growth of HY130 Steel in Salt Water
• Surface-Crack Shape Change in Bending Fatigue Using an Inexpensive Resonant Fatiguing Apparatus
• Displacement Coefficients Along the Inner Boundaries of Radially Cracked Ring Segments Subject to Forces and Couples
• Calibration of the Side-Grooved Modified Wedge-Opening-Load Specimen
• Comparison of Stress Corrosion Cracking Properties of Several Aircraft Structural Alloys
• Effect of Temperature on Stress Corrosion Cracking of 300M Steel
• Impact Three-Point Bend Testing for Notched and Precracked Specimens
• Load-Displacement Measurement and Work Determination in Three-Point Bend Tests of Notched or Precracked Specimens
• Tapered Tensile Specimen for Stress Corrosion Threshold Stress Testing
• Threshold Corrosion Fatigue Crack Growth in Steels
• Comparison of Equivalent Energy and Energy Per Unit Area (¯W/A) Data with Valid Fracture Toughness Data for Iron, Aluminum, and Titanium Alloys
• A Technique for Measuring Load-Line Displacements of Compact Ductile Fracture Toughness Specimens at Elevated Temperatures
• Mode I Stress Intensity Factors for Round Compact Specimens
• Empirical Formulations for the Analysis and Prediction of Trends for Steady-State Fatigue Crack Growth Rates
• Thermal Fatigue Testing System for Structural Materials
• Results of Interlaboratory Test Programs to Evaluate the ⅝-in. (16-mm) Dynamic Tear Test Method
• Statistical Tolerance Limits for Censored Weibull Data
• A Concept for Fatigue Analysis of Complex Components
• Fatigue Life and Crack Propagation Analyses of Welded Components Containing Residual Stresses
• Estimating Plane Strain Fracture Toughness of High Strength Aluminum Alloys from Crack Arrest Toughness
• Multiaxial Stress-Strain Approximations for Notch Fatigue Behaviors
• Effect of Antibuckling Constraint on Determination of Critical Stress Intensity Factor of Aluminum Sheet
• The Effects of Specimen Thickness and Stress Relief on Fatigue Crack Growth Rate in Nickel-Chromium-Molybdenum-Vanadium Steel
• Discussion of “Unusual Potential Drop During the Application of the Electrical Potential Method in a Fracture Mechanics Test” by V. Bachmann and D. Munz
• Local Strain Behavior Prior to Fatigue Crack Nucleation
• A Damage Function and Associated Failure Equations for Predicting Hold Time and Frequency Effects in Elevated Temperature, Low Cycle Fatigue
• A Definition of Drawability and Its Relation to Deformation in the Drawing of Square Cups
• Elevated Temperature Fatigue of Aluminum Alloy 5454 [Addendum to “Low Cycle Fatigue of Aluminum Alloys”]
• Converting Fatigue Loading Spectra for Flight-by-Flight Testing of Aircraft and Helicopter Components
• Unusual Potential Drop During the Application of the Electrical Potential Method in a Fracture Mechanics Test
• An Analysis of the Influence of Mean Stress Intensity and Environment on Fatigue Crack Growth in a New High Strength Aluminum Alloy
• Cumulative Fatigue Damage Analysis of a Light Truck Frame
• History Dependence in the Cyclic Stress-Strain Response of Wavy Slip Materials
• Variability in Fatigue Crack Growth Rate Testing
• Fracture Testing with Surface Crack Specimens
• Cycle-Dependent Softening in Notched Steel Specimens
• Evaluation of Deformation Phenomena of Metals for Fatigue Analysis
• Fatigue of Ferrocement
• A New Method of Detecting Fatigue Crack Propagation in Ferromagnetic Specimens
• Failure Load Criteria for Two Collinear Cracks in a Finite Width Strip
• A Fracture Mechanics Method for Determining the Crack Propagation Resistance of Embrittled Aluminum Bicrystals
• Note on Performance of Tapered Grip Tensile Loading Devices
• Correlation of Damping and Fatigue Properties of an AISI 403 Stainless Steel
• Discussion of “High Cycle Fatigue Crack Propagation Rates in Copper” by Yoshifumi Nakano and B. I. Sandor
• Closure to “Discussion of ‘High Cycle Fatigue Crack Propagation Rates in Copper’ by A. W. Thompson” by Yoshifumi Nakano and B. I. Sandor
• Discussion of “Dependence of Fatigue Notch Factor on Plasticity and Duration of Crack Growth” by C. V. B. Gowda, B. N. Leis, and K. N. Smith
• Effect of Specimen Thickness on Delay in Fatigue Crack Growth
• The Application of the Single-Edge Notched Beam to Fracture Toughness Testing of Ceramics
• Evaluation of Large Strains in Industrial Applications
• Fracture of Rocket Grain Models Subjected to Cooldown: A Study of Temperature-Initiated Fractures of Two-Dimensional Rocket Grain Models
• Axial Alignment Fixtures for Tension Tests of Threaded Specimens
• Decreasing the Fatigue Strength Reduction Factor by Dimpling
• Strain Fatigue and Tensile Behavior of Inconel® 718 from Room Temperature to 650°C
• Temperature Influence on Corrosion Fatigue Behavior of 5Ni-Cr-Mo-V Steel
• High Cycle Fatigue Crack Propagation Rates in Copper
• A Test Procedure for Determining the Influence of Stress Ratio on Fatigue Crack Growth
• Fatigue Behavior of Copper with Intermediate Surface Layer Removal
• Dependence of Fatigue Notch Factor on Plasticity and Duration of Crack Growth
• Probabilistic Updating of Flaw Information
• Fatigue Failure Predictions for Plates with Holes and Edge Notches
• A Simple Method for Studying Slow Crack Growth
• Fatigue Life and Inelastic Strain Response under Complex Histories for an Alloy Steel
• A Tension-Compression Test Fixture to Determine Bauschinger Effect
• Work of Fracture and Fracture Toughness of Graphite
• Crack Toughness Evaluation of Hot Pressed and Forged Beryllium
• S-200 Grade Beryllium Fracture Toughness Properties
• Metallurgical Aspects of the Failure of the Point Pleasant Bridge
• Fatigue Behavior of Solders Used in Flip-Chip Technology
• ASTM Standardization Activities in the Fracture Testing of Beryllium
• The Fracture Toughness of Beryllium
• Fatigue-Crack Growth in Type 304 Stainless Steel Weldments at Elevated Temperatures
• Cyclic Stress, Strain, and Energy Variations under Cumulative Damage Tests in Low-Cycle Fatigue