Product Information
Get Product Updates
Request A Free Catalog
View Catalog
Site Search
Standards Search
Technical Committees
/
Committee E08
/
Committee Publications
Journal of Testing and Evaluation
Application of Artificial Neural Network for Fatigue Life Prediction under Interspersed Mode-I Spike Overload
Comparison of Fatigue Crack Propagation Behavior of Al 2024 and Al–Li 8090 Helicopter Fuselage Panels
Fatigue Crack Growth Rates in Pipeline Steels Using Curved M(T) Specimens
The Nondestructive Estimation of Mechanical Properties of a Carbon Steel by X-ray Diffraction Peak Broadening
Crack Mouth Opening Displacement-Based η Factors for SE(B) Specimens
Crack Size Evaluation Using Unloading Compliance in Single-Specimen Single-Edge-Notched Tension Fracture Toughness Testing
Development and Preliminary Testing of a Crack Detection Sensor for Crack Velocity Measurement of an Edge-Notched Disk
Effects of Cycles below the Fatigue Limit on the Life of a High Strength Steel
Revised Incremental
J
-Integral Equations for ASTM E1820 Using the Crack Mouth Opening Displacement
Experimental and Numerical Determination of Mixed Mode Crack Extension Angle
Evaluating the Onset of Tearing in Elastic-Plastic Fracture Toughness Testing Using In Situ Optical Microscopy
A Generalized Method for Calculating Strain for a Circular Cross-Section Specimen Subject to Axial Force and Bending
Development of a Reversible Bending Fatigue Test Bed to Evaluate Bulk Properties Using Sub-Size Specimens
A Revised Procedure for the Construction of a 3-Parameter
J
R
Resistance Curve and the Determination of Initiation Toughness
J
0.2
Determination of the Fatigue Resistance of HVOF Thermal Spray WC-CoCr Coatings by Means of Impact Testing
Laser Welding Conditions to Improve Tensile Strength and Fatigue Strength of a Lap Joint in Aluminum Alloys
Experimental Technique for Fully-Reversed
qa
Low-Cycle Fatigue Testing of Thin Metallic Foils
Small Specimen Test Techniques for Estimating the Tensile Property Degradation of Mod
qa
9Cr-1Mo Steel on Thermal Aging
Development of a Stress Corrosion Cracking Test Methodology Using Tube-shaped Specimens
Fatigue Prediction of Lightweight Thermoplastic Fiber-Metal Laminates
Crack Initiation Determination for Three-Point-Bend Specimens
Stress Intensity Formulas for Three-dimensional Cracks in the Vicinity of an Interface
Effect of Magnetic Field on Fatigue Crack Propagation of Single-Edge Cracked Soft Ferromagnetic Specimens under Mode I Loading
A Test Method to Determine Low-Cycle-Fatigue Behavior of Wrinkled Pipe
Dynamic Fracture-Initiation Toughness ermination of Al 7075-T651 Aluminum Alloy
Influence of the Calibration Points on the
S
pb
Parameter Behavior
Time-Dependent Reliability of Thermally Shocked SiC Tubes
The Influence of Initial Crack Length on Critical Stress Intensity Factor
K
1
A Two-Parameter Method for Determining the Fracture Toughness of Materials from Subsized Specimens
Effects of Different Load Schemes on the Fatigue Crack Growth Rate
Evaluation of the ASTM
J
Initiation Procedure Using the EURO Fracture Toughness Data Set
On Measuring Mixed Mode I/III Fracture Toughness of Ductile Materials Using the Critical Stretch Zone Width
Experimental Determination of Fatigue Crack Closure in 316 (N) Weld Using a Global CMOD Method
Control of Noise and Specimen Temperature During 1 kHz Fatigue Experiments
Corrected Procedure for Crack Length Calculation by the Unloading Compliance Technique for Charpy-sized Specimens
Fracture and Adiabatic Heating of Thick-Section Weldment in Fe-24Cr-15Ni-4Mn-0.32N Stainless Steel with Ni-Base Filler Metals at 4 K
Theoretical Derivation and Experimental Examination of the Stromeyer Relation for the Analysis of Fatigue Data
A Model for Mixed-Mode Fatigue
Fracture and Strength of Ceramic Notched Elements under Compression
Characteristic Fatigue-Creep Interaction Behavior of an ESR-Cast-to-Shape Gas Turbine Disc Alloy with Coarse Branch Crystals at High Temperature
Evaluation of Welds Exhibiting Large Scatter in Charpy Toughness Using the Reference Temperature
An Investigation of Hydraulic Bulging as a Biaxial Straining Test for Sheet Metal
Fatigue Crack Closure and Crack Growth Following an Overload
An Energy-Based Crack Extension Formulation for Crack Resistance Characterization of Ductile Materials
On the Possibility of Avoiding the Use of a Clip Gage When Testing Precracked Charpy-V Specimens in the Ductile-to-Brittle Transition Region
Numerical Analysis for Small Punch Creep Tests by Finite-Element Method
Detecting Overload from Strain Information during Fatigue Crack Propagation under Negative Stress Ratio
The Determination of
J
Ic
Using the Time-Frequency Analysis Method
Fracture Toughness of Thin Polymer Films Using Miniature Specimens
Evaluation of the Mean Plastic Strain Ratio
r
m
of Metallic Sheets Prestrained Along Different Biaxial Strain Paths
Fatigue Crack Closure Evaluation Under Constant Amplitude and Spectrum Loading
Fracture Toughness Testing of Polymers Using Small Compact Specimens and Normalization
Fatigue-Creep Dynamic Strain Rate Map of a Fe-Ni-Cr Alloy with Coarse Branch Crystals
Fatigue Performance of Open Drilled Holes with Burrs
Fatigue Mechanism of Ion-Nitrided Low Carbon Steel
Liquid-Metal Embrittlement of 7075 Aluminum and 4340 Steel Compact Tension Specimens by Gallium
Analytical Model for Fatigue Crack Propagation in Concrete
An Extrapolation Method for Estimating Crack Growth Rate Confidence Intervals from Small Fatigue Crack Data
Application of a Relativistic Conservation Equation to Crack Initiation
Dynamic Loading Fracture Tests of Ferritic Steel Using the Direct Current Potential Drop Method
Fatigue Crack Growth in Cantilever Bending Under Displacement Control
Determination of the Energy Necessary for Creating Fatigue Cracks by Measurement of Microhardness
Analysis of a High Rate Round Robin Based on Proposed Annexes to ASTM E 1820
The Calibration Functions of the Arc-Shaped Bend Specimen
J
-Integral Evaluation of Single-Edge Notched Specimens under Mixed-Mode I/II Loading
A Finite Element Analysis of the Stress Intensity Resulting from Single-Edge Precracked Beam Loading Conditions
Low and High Cycle Fatigue Interaction in 316L Stainless Steel
Cyclic Loading and Creep of Intracranial Aneurysm Clips
An On-Line Correction Technique of Random Loading with a Real-Time Signal Processor for a Laboratory Fatigue Test
Low-Cycle Fatigue Characteristics of Precipitation-Hardened Superalloys at Cryogenic Temperatures
The Influence of Specimen Size on the Fracture Behavior of a Structural Steel at Different Temperatures
DC Potential Drop Calibration in Creep-Fatigue Loading Conditions
Evaluation of the Autofrettage Effect on Fatigue Lives of Steel Blocks with Crossbores Using a Statistical and a Strain-Based Method
Extension and Evaluation of Fatigue Model for Product Shock Fragility Used in Package Design
The Effect of Load and Crack Misalignment on Stress Intensity Factors for Bend-Type Fracture Toughness Specimens
A Proposal for Specimen Size Requirements in Toughness Qualification with the Weibull Stress Criterion
On the Application of the Indirect Compliance Measurement Technique to Flexure Specimens Containing a Chevron Notch
General Constitutive Relations of Anorthotropic 6061-T6 Aluminum and Its Fatigue Life under Proportional and Non-Proportional Loadings
Comparison of Finite Element Results and Experimental Measurements of CTOD δ
5
in CT Specimens
Effect of Crack Front Curvature and Side Grooving on CTOD δ
5
and
J
-Integral in CT and 3PB Specimens
Prediction of Permanent Deformation of Asphalt Concrete in Cyclic and Monotonic Loading
Yield of Inconel 718 by Axial-Torsional Loading at Temperatures up to 649°C
Prediction of Fatigue Performance of Asphalt Concrete Mixes
A Method to Determine the Transition Point of Fatigue Crack Growth Rate from Near-Δ
K
th
to Paris Regions
On the Determination of
JIC
Using the Stretch Zone Width Method
A CTOD Approach to Predicting Crack Extensions in Aluminum Alloys
Cyclic Response and Fatigue of Steels Subjected to Strain Control with Non-Zero Means
The Influence of Irregularities in the Crack Shape on the Crack Extension Measurement by Means of the Direct-Current-Potential-Drop Method
Stress-Strain Behavior of a Fe-Ni-Cr Alloy During In-and Out-of-Phase Synchronized Thermal Cycling and Mechanical Cycling Tests
Measurement and Interpretation of Fatigue Crack Growth in 7075 Aluminum Alloy Using Acoustic Emission Monitoring
Effect of Loading Parameters on Post-Overload Fatigue Crack Closure
Measurement of Fatigue-Creep Dynamic Back Stress and Strain Rate Equation of a Fe-Ni-Cr Alloy
An H
2
-Optimal Control of Random Loading for a Laboratory Fatigue Test
Experimental Justification for Proposed Changes to the Measurement of
K
Ic
Using ASTM E 399
A Computer Program to Aid in Fatigue Precracking of Fracture Toughness Test Specimens
Fatigue Crack Propagation Threshold: What Is It and How Is It Measured?
On the Determination of Fracture Energy Using the Peel Test
A Tapered Double-Cantilever-Beam Specimen Designed for Constant-
K
Testing at Elevated Temperatures
Determination of η
pl
Factor: Influence of Side Grooving
Application of Analysis of Variance (ANOVA) Statistical Methods to Breaking Load Corrosion Test
Fatigue Testing of Microspecimens from a Weldment
Fatigue and Creep Crack Growth in Fine Sand Asphalt Materials
Strain-Controlled Cumulative Fatigue with Mean Strains and High-Cycle and Low-Cycle Interaction
Mixed Mode Fiber Pull-Out Equipment: Applications and Results
Analysis of Fatigue Data with Runouts Based on a Model with Nonconstant Standard Deviation and a Fatigue Limit Parameter
A Modified Normalization Method for Developing J-R and CTOD-R Curves with the LMN Function
Estimating Creep Rates During Tensile Cyclic Loading
Elastic Compliance of the Compact Tension Specimen Comprising Two Linear-Elastic Materials Bonded with a Thin Layer
High Resolution
R
-Curve Characterization of the Fracture Toughness of Thin Sheet Aluminum Alloys
Creep Rupture Investigation of 63Sn-37Pb Solder by Experiments and Damage Mechanics
Optimal Design of a Disk-Shaped Specimen for Biaxial-Tensile Fatigue Testing
A Fracture Test Method for Mode I Fracture Of Thin Metal Materials
Creep Testing of Steels at Very High Temperatures
Fatigue Under Stress Cycling With Nonzero Means
Fracture Mechanics Expressions for the Standard Chord-Supported Arc Bend Specimen
Fracture Toughness of Unalloyed Austempered Ductile Cast Iron (ADI)
Mixed Mode Stress Intensity Calibrations for an Angled Crack Bend Specimen
Development of a Dynamic Load-Deflection Apparatus for Elastomeric Materials
A Modified Miniature Disk Test for Determining Material Mechanical Properties
A Consideration of Evaluation of Fatigue Crack Propagation Rate from Effective Stress Intensity Factor Range
Calibration of DC Potential Technique Using an Optical Image Processing System in LCF Testing
Crack Initiation Fracture Toughness of Transmission Line Hardware Steels
A Study of the Fatigue Softening and Hardening of Steel by the Magnetoelastic Effect Method
Elastic Compliance of Four-Point Bend Specimens Comprising Two Linear-Elastic Materials Bonded with a Thin Layer
Dynamic Fracture Toughness (DFT) of Banded HSLA Steels
A Method for Generating Fatigue Marker Bands Using a Constant
K
max
Test Procedure
Fracture Toughness by Small Punch Testing
Inconsistencies between CTOD and
J
Calculations
Back Face Strain Calibration for Crack Length Measurements
The Determination of Single Edge-Notched Bend Specimen Load Line Displacement from Remotely Located Sensors in Elastic-Plastic Fracture Testing
Effects of Load-Distributed Width on Split Tension of Unnotched and Notched Cylindrical Specimens
Fatigue Testing of High-density Polyethylene and Polycarbonate with Crack Length Measurement Using Image Processing Techniques
The Influence of Testing Methodology on the Fatigue Crack Propagation Behavior of Cellulose Esters
Effect of Overload Cycles on Thin Steel Roof Claddings during Cyclonic Winds
Determining the Potential Drop Calibration of a Fatigue Crack Growth Specimen Subject to Limited Experimental Observations
A Fractographic Technique for the Estimation of Initiation Fracture Toughness
J
Ic
for Ductile Materials
Deducing Crack History in an Aged Boiler Tube from Fracture Surface Topography
Instructions for a New Method of Inclusion Rating and Correlations with the Fatigue Limit
A Suggested Test Procedure to Measure Mixed Mode I–III Fracture Toughness of Brittle Materials
Prediction of Fatigue Life of Plain Concrete Beams from Fracture Tests
Numerical Model of Primary Creep Deformation in a Novel Double Shear Specimen
Fatigue Crack Propagation in a Specimen with a Complicated Cross-Section; Characterization of the Stress Intensity Factor
The Use of Fatigue Specimens Precracked in Compression for Measuring Threshold Values and Crack Growth
Dynamic Fracture Toughness Measurements on Small Charpy Specimens—A Preliminary Study
R
-Curve Generation and CTOD Evaluation Considering Maximum Crack Growth Size and Parabolic Crack Front
Crack Length and
J
-Integral Expressions for Specimens Loaded in Tension
Maximum-Load Predictions in the Dugdale Model Using a Critical CTOA Criterion
A Detection Method of Fatigue Crack Initiation by Analyzing Strain Waveform
Influence of Substrate Deformations on the Thermal Fatigue Life of SMT Solder Joints
An Advanced Control Concept and Algorithm for Long-Term Data Acquisition in High-Temperature Fracture Mechanics Tests
Some Microstructural Conditions for Evaluating Fracture Toughness and
R
-Curve Behavior in Platelet-Reinforced Composites
Fatigue Crack Initiation in Nonferrous Materials: A Model Assessment
J
and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens
Initiation and Stable Crack Growth Behavior of API X70 Steel at Low Temperatures (25°C ≥ T ≥ −95°C)
Introduction of a New Dynamic Fracture Toughness Evaluation System
The Design of a Control System for a Superimposed Frequency Fatigue Test Machine
Axial-Torsional Fatigue: A Study of Tubular Specimen Thickness Effects
The Gel Electrode Revisited: Fatigue Crack Detection with a Polymer Film
Fatigue and Corrosion Fatigue of Beryllium-Copper Spring Materials
Minimization and Quantification of Error Associated with the
K
Gradient and the Interval of Crack Length Measurement in Fatigue Crack Growth Testing
Monitoring Fatigue Crack Propagation in Compact Tension Specimens via Remote Sensing of Back Face Strain
Calculation for Rolling Contact Fatigue Life and Strength of Case-Hardened Gear Materials by Computer
Crack Initiation and Total Fatigue Life of a Carbon Steel in Vacuum and Air
Residual Stresses and Fatigue Precracking Techniques for Weldment Fracture Toughness Specimens
Effects of Notch Length on the Ductile Fracture of a Center-Notched Low Carbon Steel Plate
The Use of Small Punch (Bulge) Tests to Estimate Fracture Stress in the Lower Shelf Regime
Notch Dimensions for Three-Point Bend Fracture Specimens Based on Compliance Analyses
Fracture Toughness Determination Related to Indentation Problems Avoidance in Three-Point Bend Specimens
On the Intrinsic Character of the Stress-Strain Curve of a Prestressing Steel
A Method for Estimation of the Radius of Elastic-Plastic Boundary Around Cold-Worked Holes
Analysis of Elastic and Plastic Strains for Internally Pressurized Cylinders
New Formulae for Determining Fracture Toughness of a Wide Range of Different Materials with Chevron-Notched Short-Rod and Short-Bar Specimens
Charpy Absorbed Energy and
J
Ic
as Measures of Cryogenic Fracture Toughness
Fatigue Threshold Regime of a Low Alloy Ferritic Steel under Closure-Free Testing Conditions: Part I—Compliance Variations in the Threshold Regime
Fatigue Threshold Regime of a Low Alloy Ferritic Steel under Closure-Free Testing Conditions: Part II—Hysteresis in Near-Threshold Fatigue Crack Propagation: An Experimental Assessment
Fatigue Behavior of (BS 1470 N8-0) Aluminum Alloy and (BS 1501–510) Nickel Steel Double-Fillet and Tee-Butt Welds (Subject to Bending)
Critical Assessment of Methods for
J
Ic
Determination
An Apparatus for Biaxial Strength Testing of Standard Tensile Specimens
An Efficient Algorithm to Characterize Stress-Strain Data Using Piecewise Linear Curves
Crack Tip Opening Displacement (CTOD) Toughness Evaluation by ASTM E 1290 and BS5762: A Comparative Analysis
Finite Element Method (FEM) Analysis of Elastic-Linear-Hardening Materials and Comparison with Measurements on Commercial Materials
Evaluation of Elastic Stress Intensity Using
J
-Integral Specimen Geometries
Methods of Determining Subcritical Crack Growth by Static Lifetime Tests with Natural and Artificial Cracks
Thermal Shock and Thermal Fatigue Testing
Normalization Method for Developing
J-R
Curves with the
LMN
Function
Energy Stored in a Specimen under Fatigue Limit Loading Conditions
Effect of Thickness on Elasto-Plastic Deformation and Hysteretic Energy Dissipated at Crack Tip
Effects of Microcracks and Artificial Surface Cracks on Fracture Ductility of a Torsional Prestrained Specimen
Prediction of Fatigue Life of Asphalt Concrete Beams from Fracture Tests
Shear Strength of a Ductile Material from Torsion of Solid Cylinders
Theoretical Comparison of Error in K
Ic
Values Determined by Different Testing Methods of Ceramics
Specimen Size Requirements for Fracture Toughness Testing in the Transition Region
Plastic η and γ Factors for Compact Tension Specimen in
J
-Integral Estimation
Deformation of Aluminum Alloy under Cyclic Creep Loadings
Improved Wide Range Expressions for Displacements and Inverse Displacements for Standard Fracture Toughness Specimens
Characterization of the Effects of Large Unloading Cycles on the Ductile Tearing Toughness of HSLA Steel
Probability, Confidence, and Sample Size in Fatigue Testing
A Quality Control Test for Selecting Materials to Arrest Fast-Running, Full-Thickness Cracks
Changes in Cotton Fabric Bending Properties As a Result of Laboratory Wear
Introduction to Symposium on Quantitative Methods in the Assessment of Structural Defects
Durability Assessment Based on Initial Material Quality
A Rapid Method for Measurement of Rolling Contact Fatigue Limit of Case-Hardened Gear Materials
Discussion of “Chevron-Notched Specimens for Fracture Toughness Measurements Independent of
R
-Curve Effects,” with Author's Closure
Fatigue Behavior of a Cold-Rolled SAE Grade 945X HSLA Steel
Stress Intensity Factors for Side-Grooved Fracture Specimens
J
Ic
Data Analysis Methods with a “Negative Crack Growth” Correction Procedure
Estimation of Characteristic Values of Fracture Toughness
Cyclic Stress-Strain Behavior and Low Cycle Fatigue of Ti 6242
Influence of Overload Plastic Zone Size on Stress Corrosion Crack Growth Behavior of a Low Alloy Steel in 3.0% NaCl Solution
Elasto-Plastic Fracture Characterization of Paving Materials at Low Temperatures
A Suggested Procedure for Combined Mode I — Mode III Fracture Toughness Testing
The Linearity of Clip Gages Used in Fracture Mechanics Tests
Applicability of Modified
J
as a Fracture Parameter for Polycarbonate
Estimation of the
Ct
Parameter: Experimental Implications
Dynamic
K
Measurements in Three-Point-Bend Specimens
Effect of Compressive Underloads and Tensile Overloads on Fatigue Damage Accumulation in 2024-T351 Aluminum
The Use of Miniaturized Tests to Predict Flow Properties and Estimate Fracture Toughness in Deformed Steel Plates
Rotation Corrections in Three-Point Single Edge Notch Bend Specimens
A Method to Obtain Ideal Fatigue Crack Propagation for Steels
A Linear Short-Lever Extensometer
Fatigue Performance of AISI 1140 Modified Steel
Fractography of AISI 1140 Modified Steel under Static and Cyclic Loading Conditions
Regression Analysis of Single Specimen Fracture Toughness Data with Serially Correlated Errors
Determination of the Loading Rate Needed to Obtain Environmentally Assisted Cracking in Rising Load Tests
Low-Cycle Fatigue Analysis of Notched Members
Chevron-Notched Specimens for Fracture Toughness Measurements Independent of
R
-Curve Effects
Proposed Standard Arc-Bend Chord-Support Fracture Toughness Specimens and
K
Expressions
Designing Bearing Fatigue Life Tests for Improving the Use of Testing Resources
Fatigue of Submerged Concrete under Low-Cycle, High-Magnitude Loads
Sensitivity of Fatigue Crack Growth Prediction (Using Wheeler Retardation) to Data Representation
Comparison of Chevron-Notched Specimen Types for Fracture Toughness Testing of Aluminum
Effects of Small Surface Cracks on Ductility Loss in Low Cycle Fatigue of 70/30 Brass
Fatigue Crack Propagation Threshold
A Model to Predict the Sources and Magnitude of Scatter in Toughness Data in the Transition Region
Linear-Elastic Fracture of High-Nitrogen Austenitic Stainless Steels at Liquid Helium Temperature
Statistical Design of Fatigue Crack Growth Test Programs
Plastic Rotation Factors of Three-Point Bend and Compact Tension Specimens
A Direct
J-R
Curve Analysis of Fracture Toughness Tests
Evaluation of Creep Rupture Behavior of 1Cr-1Mo-0.25V Steel with 0.04 wt% Sn
Strain-Hardening Characteristics of Aluminum-1050A, α-(70/30) Brass, and Austenitic Stainless Steel under Biaxial Loading
Evaluation Procedure for Low Cycle Fatigue Data
Indirect Measurements of Compliances in Four-Point-Bending Tests
Comparison of Compliance Results for the Wedge-Loaded Compact Specimen
An Analysis of Notch-Size Effects at the Fatigue Limit
Prediction of Specimen Strain from Extensometer Deflection Measurements in a Direct Stress Fatigue Test Specimen under Static Tensile Loading
Crack Length Measurement During Rapid Crack Growth Using an Alternating-Current Potential Difference Method
Effect of Prestrain on Fracture Toughness of Rolled Mild Steel with Significant Inclusion Content
Fatigue Life Prediction in Flexural Bending of Hollow Cross-Sectional Bars from Axial Fatigue Information
Development of a Miniaturized Specimen Technique for Fracture Toughness
J
Ic
Measurement
Evaluation of Notch Tip Opening Displacement Using a Composite Crack Profile Approach
Determination of Material Characteristic Values in Elastic-Plastic Fracture Mechanics by Means of
J
-Integral Crack Resistance Curves
On the Analysis of Thermally Activated Tension-Tension Cyclic Deformation Behavior
A Cleavage Precracking Technique for Sheet Steel Fracture Specimens
Determination of
K
c
and Residual Strength Values for Sheet Materials
Load-Point Compliance of a Three-Point Loaded Cracked-Notched Beam
Near-Threshold Fatigue Crack Growth Behavior for 316 Stainless Steel
J
-Integral Testing of Aluminum Alloys: A New Technique for Marking Crack Fronts
Results of an Interlaboratory Fatigue Test Program Conducted on Alloy 800H at Room and Elevated Temperatures
A Simple Method for Fatigue Precracking Specimens for Fracture Mechanics Tests
Equivalent Crack Lengths in Thin Sheet Materials Subjected to Tensile Loads
Effects of the Average Increment Δ
C
on the Scatter in
da/dN
Data and Mean Life Cycles in HY-80 Steel Plate
Characterization of Fracture Behavior in Small Punch Test by Combined Recrystallization-Etch Method and Rigid Plastic Analysis
Interlaboratory Evaluation of
K
Iscc
and
da/dt
Determination Procedures for High-Strength Steels
Cyclic Stress and Diametral Strain Response During High Strain Amplitude Fatigue of a 1Cr-1.3Mo-0.3V Bainitic Rotor Steel at Elevated Temperature—Part II
On the Determination of Crack Initiation Using Standard Test Methods
A Computerized Test System for Thermal-Mechanical Fatigue Crack Growth
A Method for Determining Conservative Fatigue Threshold While Avoiding Crack Closure
Linear Elastic Fracture Mechanics Applied to an Adhesive Spar—Wingskin Joint
Investigation of Dynamic
J
Id
for Alloy Steel Weldments Using the Split Hopkinson Bar
Poisson's Ratio As Determined for Elastic and Plastic Deformation and for Monotonic and Cyclic Loading—Part I: Critical Review
An Evaluation of Dynamic Fracture Toughness of Type A508 Class 3 Steel
R
-Curve Round-Robin Program for ASTM Recommended Practice for
R
-Curve Determination (E 561)
Development of a Constant-
K
Specimen for Materials Testing
Evaluation of Plane-Stress Fracture Testing Methods
Fatigue Crack Growth Threshold and Crack Opening of a Mild Steel
A Personal Computer Based Thermal-Mechanical Fatigue Test System
References and Conference Proceedings Towards the Understanding of Fracture Mechanics
Determination of Fracture Toughness for Brittle Nonmetallic Materials at the Subcritical Crack Growth Stage
Fracture Mechanics Evaluation of Irradiation Embrittlement in Reactor Vessel Steels Based on the Rate Process Concept
Determination of Fracture Toughness by CTOD Resistance Curve Method
Estimation of Fatigue Life at Elevated Temperature of Electron Beam Weldments of Alloy 718
Methodology for Correlating Fatigue Data Obtained under Different Test Conditions
Effect of Dither on Strain-Controlled Fatigue and Tensile Results Obtained with a Closed-Loop Servohydraulic Testing Machine
A New Method for
In Situ
Compliance Measurements for Fatigue Crack Growth Testing in Autoclaves
Effect of
R
ε
on Cyclic Stress-Strain Behavior of Inconel 718
Determination of the Critical Value of the
J
-Integral at High Loading Rates Using the Wedge-Loaded Specimen
Interlaboratory Study of Strain-Cycle Fatigue of 1.2-mm-Thick Sheet Specimens
A Thermal Control System for Thermal Cycling
Optimization of the Gel Electrode for Repeatable Imaging of Fatigue Cracks in Aluminum Alloys
J
1c
Measurements on Single Subsized Specimens of Ferritic Alloys
Plastic Strain Arising from Fatigue Crack Initiation
Stress Intensity Factors for Notched Configurations
Creep and Rupture Tests of Alloy A-286 at Elevated Temperatures
Design and Performance of a Ring-Shaped Clip Gage for Fracture Mechanics Testing
Effect of Size on Elastic-Plastic Fracture Toughness Parameters
Effect of Crack-Tip Morphology on Cleavage-Crack Extension
Determination of Crack Growth Parameter
N
in Ceramics Under Creep Conditions
Fracture Toughness of Hot-Pressed Beryllium
Task Group Report: Results of the Interlaboratory Test Program to Determine Percent Shear of Dynamic Tear Test Specimens
A Method for the Defined Fatigue Precracking of Round Notched Bars
An Optical Test Method for Measuring Biaxial Deformations
Single Specimen Fracture Toughness Testing of Low Strength Steel Plate Using The Direct Current Electrical Potential Method
Determination of Fracture Toughness of a Material That Exhibits Pop-In Behavior
Determination of Fracture Toughness
J
Ic
Under Quasi-Static and Dynamic Loading Conditions Using Wedge Loaded Specimens
Fatigue Crack Growth Life Prediction for a Bolthole Specimen Under Constant Amplitude Loading
A Report on the Workshop on High Temperature Crack Growth and Fracture
Techniques for Determination of the Crystallographic Characteristics of Environmentally Induced Brittle Fractures
Discussion of “On the Quantitative Analysis of Fatigue Crack Propagation” by A. J. McEvily
Fitting of Fatigue Curves with Nonconstant Standard Deviation to Data with Runouts
Development of a Test Setup for Measuring the Deflection of Single-Edge Notched Bend (SENB) Specimens
Analysis of an Internally Radially Cracked Ring Segment Subject to Three-Point Radial Loading
A New Method for the Determination of the Critical Value of Crack Tip Opening Displacement at the Initiation of Crack Growth Using a Single Three-Point Bend Specimen
Summary Report of Round Robin Testing by the ASTM Task Group E24.01.06 on Rapid Loading Plane-Strain Fracture Toughness
K
Ic
Testing
Numerical Analysis of Ductile Fracture Experiments Using Single-Edge Notched Tension Specimens
Stressing for Test Purposes of Materials in Tubular Form Using Elastomeric Inserts—Practical Testing Procedures
An Improved Method for Threshold Fatigue Crack Propagation Testing on an Electromagnetic Resonance Type Machine
A New Transducer to Monitor Fatigue Crack Propagation
J
Ic
Measurement Point Determination for HY130, CMS-9, and Inconel Alloy 718
Accuracy and Precision of Crack Length Measurements Using a Compliance Technique
High Pressure Fatigue Testing with Results for Tubing and Fittings
Review of the Effects of Fatigue Cracking Loads on Plane Strain Fracture Toughness
Fatigue Crack Front Shape and Its Effect on Fracture Toughness Measurements
Effects of Temperature on the Fracture Toughness of Carburizing Steels for High-Temperature Applications
In-Plane Compression: A New Laboratory Forming Technique to Study the Effect of Large Drawing Deformations in Sheets on Their Subsequent Mechanical Behavior
A Summary of Fracture Mechanics Concepts
Cyclic Stress-Strain and Fatigue Properties of Sheet Steel as Affected by Load Spectra
Fracture Mechanics Analysis of the Effects of Residual Stress on Fatigue Life
Tentative Test Procedure For Determining the Plane Strain
J
I
-
R
Curve
Evaluation of the Tentative
J
I
-
R
Curve Testing Procedure by Round Robin Tests of HY130 Steel
Fracture Testing in High Temperature and Pressure Hydrogen Environments
Dynamic Fracture Toughness and Fatigue Crack Growth Rate Properties of ASME SA508 CL 3 and SA508 CL 3a Base and Heat-Affected-Zone Materials
The Effect of Self Stresses on High Cycle Fatigue
A Constant Stress Tensile Creep Machine for Very Low Stresses
A Compressive Creep Machine
Correlation of Data from Standard and Precracked Charpy Specimens with Fracture Toughness Data for HY-130, A517-F, and HY-80 Steel
Techniques for Fatigue Testing and Extrapolation of Fatigue Life for Austenitic Stainless Steels
Discussion of “Statistical Fatigue Failure Analysis” by G. G. Trantina
Closure to “Discussion of ‘Statistical Fatigue Failure Analysis’ by W. N. Findley” by G. G. Trantina
Fatigue Crack Growth Rate Data Acquisition System for Linear and Nonlinear Fracture Mechanics Applications
Determination of Crack Tip Energy Dissipation and Elastic-Plastic Fracture Toughness Parameter with Ductile Crack Extension
An Evaluation of a Load-Line Extensometer for Elastic-Plastic Fracture Toughness Testing
A Constant Force System for Delayed Fracture Experiments
Crack Initiation, Slow Crack Growth, and Unstable Propagation of Ductile Fracture in Mild Steels in a Laboratory Experiment
R
Curve and Fracture Toughness of Thin Sheet Materials
Some Aspects of Fatigue Crack Closure in Two Contrasting Titanium Alloys
A Biaxial Fatigue Machine for Elevated Temperature Testing
The Effects of Stress Dwells and Varying Mean Strain on Crack Growth During Thermal Mechanical Fatigue
Stress Intensity Factors for Single-Edge-Crack Solid and Hollow Round Bars Loaded in Tension
Multiaxial Fatigue: A Survey of the State of the Art
Precision Strain Measurement at Elevated Temperatures Using a Capacitance Probe
Application of the Electrical Potential Method to Crack Length Measurements Using Johnson's Formula
Comparison of Methods for Fracture Toughness Determination in Steels
On the Relationship of Toughness, Fracture Initiation Energy, and Specimen Deflection in Charpy Tests of 4340 Steel
A Fracture Toughness Data Bank
An Optimal Method for Determining Anisotropic Parameters Under Combined Stress Tests
Task Group Report: Results of Interlaboratory Test Programs to Evaluate the Dynamic Tear Test Method
Discussion of “Effects of Stress Ratio on Fatigue Crack Growth Rates in X70 Pipeline Steel in Air and Saltwater” by Oldrich Vosikovsky
Review of New Developments in Crack Propagation Studies
Chevron V-Notched Bend Specimen for
K
Ic
Measurement of Brittle Materials
On the Relationship Between Stretch Zone Formation and the
J
Integral for High Strain-Hardening Materials
Fatigue Life Prediction of Welded Components Based on Fracture Mechanics
A Proposed Standard Round Compact Specimen for Plane Strain Fracture Toughness Testing
A Wide Range Stress Intensity Factor Expression for the C-Shaped Specimen
Vibrations in Compact Specimens During Crack Arrest Testing
Evaluation of the
J
Ic
Testing Procedure by Round Robin Tests on A533B Class 1 Pressure Vessel Steel
Results of an ASTM Cooperative Test Program on the
J
Ic
Determination of HY130 Steel
Measuring
J
Ic
, and the Resistance to Crack Growth After Initiation
Generalized Application of Neuber's Rule
Performance of Chevron-Notch Short Bar Specimen in Determining the Fracture Toughness of Silicon Nitride and Aluminum Oxide
Evaluation of the Three-Component Model for Representing Wide-Range Fatigue Crack Growth Rate Data
Comparisons of Fracture Toughness Measurements by the Short Rod and ASTM Standard Method of Test for Plane-Strain Fracture Toughness of Metallic Materials (E 399-78)
A Single Specimen Determination of
J
Ic
for Different Alloy Steels
Effects of Stress Ratio on Fatigue Crack Growth Rates in X70 Pipeline Steel in Air and Saltwater
A Compact Specimen for Plane Strain Crack Arrest Toughness Testing
A Hydrostatic Stress-Sensitive Relationship for Fatigue Under Biaxial Stress Conditions
The Development of a Closed-Loop, Servo-Hydraulic Test System for Direct Stress Monotonic and Cyclic Crack Propagation Studies Under Biaxial Loading
Determination of the Fracture-Energy Criterion
J
Ic
of Two Steels by Static and Dynamic Testing
Fitting Curves to Toughness Data
Evaluation of the
J
Integral for the Compact Specimen
Relationships Between Low-Cycle Fatigue and Fatigue Crack Growth Rate Properties
A Low-Cycle Fatigue Test for Pipe-Type Power Transmission Cables
Stress-Strain Characteristics of Reinforcing Steel Bars Under Cyclic Loading
Optimization of the Electrical Potential Technique for Crack Growth Monitoring in Compact Test Pieces Using Finite Element Analysis
Environmental Testing Under Random Loading
A Tower Extensometer
A Simple and Sensitive Method of Monitoring Crack and Load in Compact Fracture Mechanics Specimens Using Strain Gages
The Influence of Bulk-Solution-Chemistry Conditions on Marine Corrosion Fatigue Crack Growth Rate
Use of the Double Torsion Method to Study Crack Propagation in an Adhesive Layer
Three-Point Bending at Large Deflections of Beams with Different Moduli of Elasticity in Tension and Compression
Application of Fatigue Life Prediction Techniques to Materials Substitution
A Correlative Study Between Analysis and Experiment on the Fracture Behavior of Graphite/Epoxy Composites
Constant and Variable Amplitude Fatigue Behavior of Eight Steels
Strain Criteria for Fatigue Fracture of Metals at High-Cycle Loading
Effect of Measurement Precision and Data Processing Procedures on Variability in Fatigue Crack Growth Rate Data
Statistical Analysis of Notch Toughness Data
A New Fixture for Fatigue Testing
Compliance Correction for Determining Load-Line Energies for Compact Fracture Toughness Specimens
A Procedure for the Determination of Ductile Fracture Toughness Values Using
J
Integral Techniques
Fracture Toughness Evaluation of Polymers with Surface-Crack Specimens
Influence of Material Property Variations on the Assessment of Structural Integrity of Nuclear Components
Cooperative Plane Strain Fracture Toughness Tests with C-Shaped Specimens
A Summary and Comparison of
J
Estimation Procedures
The Effect of Interference on the Dimpled, Loaded-Hole Fatigue Strength of 2024-T3 Alclad® Aluminum Alloy
Computer-Controlled Decreasing Stress Intensity Technique for Low Rate Fatigue Crack Growth Testing
Frequency, Stress Ratio, and Potential Effects on Fatigue Crack Growth of HY130 Steel in Salt Water
Surface-Crack Shape Change in Bending Fatigue Using an Inexpensive Resonant Fatiguing Apparatus
Displacement Coefficients Along the Inner Boundaries of Radially Cracked Ring Segments Subject to Forces and Couples
Calibration of the Side-Grooved Modified Wedge-Opening-Load Specimen
Comparison of Stress Corrosion Cracking Properties of Several Aircraft Structural Alloys
Effect of Temperature on Stress Corrosion Cracking of 300M Steel
Impact Three-Point Bend Testing for Notched and Precracked Specimens
Load-Displacement Measurement and Work Determination in Three-Point Bend Tests of Notched or Precracked Specimens
Tapered Tensile Specimen for Stress Corrosion Threshold Stress Testing
Threshold Corrosion Fatigue Crack Growth in Steels
Comparison of Equivalent Energy and Energy Per Unit Area (
¯W/A
) Data with Valid Fracture Toughness Data for Iron, Aluminum, and Titanium Alloys
A Technique for Measuring Load-Line Displacements of Compact Ductile Fracture Toughness Specimens at Elevated Temperatures
Mode I Stress Intensity Factors for Round Compact Specimens
Empirical Formulations for the Analysis and Prediction of Trends for Steady-State Fatigue Crack Growth Rates
Thermal Fatigue Testing System for Structural Materials
Results of Interlaboratory Test Programs to Evaluate the ⅝-in. (16-mm) Dynamic Tear Test Method
Statistical Tolerance Limits for Censored Weibull Data
A Concept for Fatigue Analysis of Complex Components
Fatigue Life and Crack Propagation Analyses of Welded Components Containing Residual Stresses
Estimating Plane Strain Fracture Toughness of High Strength Aluminum Alloys from Crack Arrest Toughness
Multiaxial Stress-Strain Approximations for Notch Fatigue Behaviors
Effect of Antibuckling Constraint on Determination of Critical Stress Intensity Factor of Aluminum Sheet
The Effects of Specimen Thickness and Stress Relief on Fatigue Crack Growth Rate in Nickel-Chromium-Molybdenum-Vanadium Steel
Discussion of “Unusual Potential Drop During the Application of the Electrical Potential Method in a Fracture Mechanics Test” by V. Bachmann and D. Munz
Local Strain Behavior Prior to Fatigue Crack Nucleation
A Damage Function and Associated Failure Equations for Predicting Hold Time and Frequency Effects in Elevated Temperature, Low Cycle Fatigue
A Definition of Drawability and Its Relation to Deformation in the Drawing of Square Cups
Elevated Temperature Fatigue of Aluminum Alloy 5454 [Addendum to “Low Cycle Fatigue of Aluminum Alloys”]
Converting Fatigue Loading Spectra for Flight-by-Flight Testing of Aircraft and Helicopter Components
Unusual Potential Drop During the Application of the Electrical Potential Method in a Fracture Mechanics Test
An Analysis of the Influence of Mean Stress Intensity and Environment on Fatigue Crack Growth in a New High Strength Aluminum Alloy
Cumulative Fatigue Damage Analysis of a Light Truck Frame
History Dependence in the Cyclic Stress-Strain Response of Wavy Slip Materials
Variability in Fatigue Crack Growth Rate Testing
Fracture Testing with Surface Crack Specimens
Cycle-Dependent Softening in Notched Steel Specimens
Evaluation of Deformation Phenomena of Metals for Fatigue Analysis
Fatigue of Ferrocement
A New Method of Detecting Fatigue Crack Propagation in Ferromagnetic Specimens
Failure Load Criteria for Two Collinear Cracks in a Finite Width Strip
A Fracture Mechanics Method for Determining the Crack Propagation Resistance of Embrittled Aluminum Bicrystals
Note on Performance of Tapered Grip Tensile Loading Devices
Correlation of Damping and Fatigue Properties of an AISI 403 Stainless Steel
Discussion of “High Cycle Fatigue Crack Propagation Rates in Copper” by Yoshifumi Nakano and B. I. Sandor
Closure to “Discussion of ‘High Cycle Fatigue Crack Propagation Rates in Copper’ by A. W. Thompson” by Yoshifumi Nakano and B. I. Sandor
Discussion of “Dependence of Fatigue Notch Factor on Plasticity and Duration of Crack Growth” by C. V. B. Gowda, B. N. Leis, and K. N. Smith
Effect of Specimen Thickness on Delay in Fatigue Crack Growth
The Application of the Single-Edge Notched Beam to Fracture Toughness Testing of Ceramics
Evaluation of Large Strains in Industrial Applications
Fracture of Rocket Grain Models Subjected to Cooldown: A Study of Temperature-Initiated Fractures of Two-Dimensional Rocket Grain Models
Axial Alignment Fixtures for Tension Tests of Threaded Specimens
Decreasing the Fatigue Strength Reduction Factor by Dimpling
Strain Fatigue and Tensile Behavior of Inconel® 718 from Room Temperature to 650°C
Temperature Influence on Corrosion Fatigue Behavior of 5Ni-Cr-Mo-V Steel
High Cycle Fatigue Crack Propagation Rates in Copper
A Test Procedure for Determining the Influence of Stress Ratio on Fatigue Crack Growth
Fatigue Behavior of Copper with Intermediate Surface Layer Removal
Dependence of Fatigue Notch Factor on Plasticity and Duration of Crack Growth
Probabilistic Updating of Flaw Information
Fatigue Failure Predictions for Plates with Holes and Edge Notches
A Simple Method for Studying Slow Crack Growth
Fatigue Life and Inelastic Strain Response under Complex Histories for an Alloy Steel
A Tension-Compression Test Fixture to Determine Bauschinger Effect
Work of Fracture and Fracture Toughness of Graphite
Crack Toughness Evaluation of Hot Pressed and Forged Beryllium
S-200 Grade Beryllium Fracture Toughness Properties
Metallurgical Aspects of the Failure of the Point Pleasant Bridge
Fatigue Behavior of Solders Used in Flip-Chip Technology
ASTM Standardization Activities in the Fracture Testing of Beryllium
The Fracture Toughness of Beryllium
Fatigue-Crack Growth in Type 304 Stainless Steel Weldments at Elevated Temperatures
Cyclic Stress, Strain, and Energy Variations under Cumulative Damage Tests in Low-Cycle Fatigue
Site Map
|
Online Support
|
Contact
|
Web Policies
|
IP Policy
Copyright © 1996-2006 ASTM. All Rights Reserved.
ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA
