ASTM International Technical Committee E08 Publications

Product Information

Get Product Updates
Request A Free Catalog
View Catalog

Site Search

Standards Search

Technical Committees / Committee E08 / Committee Publications

Journal of ASTM International

Investigation of Transition Fracture Toughness Variation within the Thickness of Reactor Pressure Vessel Forgings
More Accurate Approximation of J-Integral Equation for Evaluating Fracture Resistance Curves
Revisit of ASTM Round-Robin Test Data for Determining R Curves of Thin-Sheet Materials
Active Surveillance Systems for Early Detection and Improved Recall Decision Making
Elastic-Plastic Stress Analysis of Cold-Worked Pin-Loaded Holes
Definition of the Influence of Pore Size on the Fatigue Limit Using Short Crack Propagation Experiments
In-Vitro Modeling of the Dynamic Forces in the Femoropopliteal Artery
Crystallographic Study of Superelastic Deformation of Nitinol
Determination of ΔK^th by Compression Pre-Cracking in a Structural Steel
An Investigation of Factors Impacting Nitinol Wire Fatigue Life
Practical Challenges Testing Coupons with Residual Stresses from Cold Expanded Holes
Feasibility of a Method to Quantify Movement-Induced Conformational Changes in the Superficial Femoral and Popliteal (Femoropopliteal) Arterial Tree Using 3-D Angiography
Stress-Triaxiality in Zr-2.5Nb Pressure Tube Materials
Statistical Analysis of Fatigue Related Microstructural Parameters for Airframe Aluminum Alloys
Full-Field Measurements of Fracture Initiation and Crack Growth in Superelastic Nitinol
Effect of Inhomogeneity in Aligned Grains on Creep-Fatigue Crack Opening and Propagation Behavior of Directionally Solidified Superalloy
An Expert System for Estimation of Fatigue Properties from Simple Tensile Data or Hardness
A Concept for the Fatigue Life Prediction of Components from an Aluminum-Steel Compound
The Significance of a Crack Growth Law for a C(T) Fracture Specimen Undergoing Stable Crack Extension
A Review of Peripheral Vascular Deformations due to Respiration and Musculoskeletal Influences
The Influence of Instrumented Striker Configuration on the Results of Dynamic Toughness Testing
Analysis of Material Inhomogeneity in the European Round Robin Fracture Toughness Data Set
Comparison of the Temperature and Pre-Aging Influences on the Low Cycle Fatigue and Thermo-Mechanical Fatigue Behavior of Copper Alloys (CuCoBe/CuCo2Be)
Influence of the Peening Intensity on the Fatigue Behavior of Shot Peened Titanium Components
Test Results from Round Robin on Precracking and CTOD Testing of Welds
Focused Ion Beam as New Tool for Local Investigations of the Interaction of Microcracks with Grain Boundaries
Experimental Study of the Fracture Toughness Transferability to Pressurized Thermal Shock Representative Loading Conditions
Fatigue Crack Growth in Open and Nut-Loaded Bolts with and without Pretension Loading
Carrying Capacity Prediction of Steam Turbine Rotors with Operation Damage
Biaxial Loading Effect on Higher-Order Crack Tip Parameters
Effect of Prestrain on Fatigue Crack Growth of Age-Hardened Al 6061-T6
Impact of Residual Stress and Elastic Follow-Up on Fracture
Influence of Residual Stresses on Fretting Fatigue Life Prediction in Ti-6Al-4V
Elastic-Plastic Finite-Element Analyses of Compression Precracking and Its Influence on Subsequent Fatigue-Crack Growth
Evaluation of Residual Stress Corrections to Fracture Toughness Values
Laser Generated Crack-Like Features Developed for Assessment of Fatigue Threshold Behavior
An Examination of Fatigue Initiation Mechanisms in Thin 35Co-35Ni-20Cr-10Mo Medical Grade Wires
Compression Precracking to Generate Near Threshold Fatigue Crack Growth Rates in an Aluminum and Titanium Alloy
Analysis of Crack Growth at R=−1 Under Variable Amplitude Loading on a Steel for Railway Axles
Fatigue Response of Aluminum Aircraft Structure under Engineered Residual Stress Processing
Evaluation of Residual Stress Effects on Brittle Fracture Strength Based on Weibull Stress Criterion
Hydrogen/Plasticity Interactions at an Axial Crack in Pipeline Steel
On the quantification of the constraint effect along a three-dimensional crack front
Multi-Scale Approach to the Fatigue Crack Propagation in High-Strength Pearlitic Steel Wires
Impact Fatigue Failure Investigation of HVOF Coatings
Experimental Estimation of J-R Curves from Load-CMOD Record for SE(B) Specimens
Mechanical Evaluation of Mixed As-Cast and Friction Stir Processed Zones in Nickel Aluminum Bronze
Fatigue Behavior of Adhesively Bonded Aluminium Double Strap Joints
A Simplified Modeling Approach for Predicting Global Distortion in Large Metallic Parts Caused by the Installation of Interference Fit Bushings
The Influence of Residual Stresses on the Fatigue Strength of Cold-Formed Structural Tubes
Introducing Heterogeneity into Brittle Fracture Modeling of a 22NiMoCr37 Ferritic Steel Ring Forging
Fatigue Crack Growth in Integrally Stiffened Panels Joined Using Friction Stir Welding and Swept Friction Stir Spot Welding
Fretting Fatigue Behavior of Shot-Peened Ti-6Al-4V and IN100
The Influence of Residual Stress on the Design of Aircraft Primary Structure
Applicability of the Fracture Toughness Master Curve to Irradiated Highly Embrittled Steel and Intergranular Fracture
Assessing the Loading Rate for a Fracture Toughness Test in the Ductile-to-Brittle Transition Region
Prediction of the Fatigue Limit of Prestrained Carbon Steel Under Tensile Mean Stress
Martensite Transformations and Fatigue Behavior of Nitinol
Characterizing Fatigue Response of Nickel-Titanium Alloys by Rotary Beam Testing
Effects of Phase Transformations on Fatigue Endurance of a Superelastic NiTi Alloy
Fatigue Crack Growth Analyses of Aerospace Threaded Fasteners—Part III: Experimental Crack Growth Behavior
Fatigue Crack Growth Analyses of Aerospace Threaded Fasteners—Part II: Material/Stress State and Bolt Strength
Fatigue Crack Growth Analyses of Aerospace Threaded Fasteners—Part I: State-of-Practice Bolt Crack Growth Analyses Methods
Fatigue Crack Growth Analyses of Aerospace Threaded Fasteners—Part IV: Numeric Analyses and Synthesis of All Results
A Comparison of Predictions From Probabilistic Crack Growth Models Inferred From Virkler's Data
Experimental Studies of NiTi Self-expanding Stent Designs
Verification of Strain Level Calculations in Nitinol Fatigue Resistance Predictions
Prediction of the Shape of the K^J Ductile-to-Brittle Transition Temperature Curve for Ferritic Pressure Vessel Steels Using the Material's Resistance to Crack Extension K^J versus Δa Curve
Finite Element Simulation of Dynamic Crack Propagation for Complex Geometries Without Remeshing
Effect of Bauschinger-Modified Autofrettage Residual Stresses on Cannon Fatigue Life
An Investigation of Specimen Geometry Effects on the Fracture Behavior of a Polytetrafluoroethylene Polymer
Verification of Analytical Models in a Fracture Mechanics Based Approach to Modeling Fretting Fatigue
Life Prediction of Fretting Fatigue of Ti-6Al-4V
A Robust Structural Stress Parameter for Evaluation of Multiaxial Fatigue of Weldments
Effect of Microstructure on Pit-to-Crack Transition of 7075-T6 Aluminum Alloy
Probing the Elastic-Plastic, Time-Dependent Stress Response of Test Fasteners Using Finite Element Analysis
Elasto-Viscoplastic Behavior of the Ferritic Stainless Steel AISI 441-EN 1.4509 from Room Temperature to 850°C
Mechanistic Studies of High-Temperature Crack Initiation in Single Crystal Materials
Asymptotic Stress Fields for Thermomechanically Loaded Cracks in FGMs
Optimum Thread Rolling Process that Improves SCC Resistance
Application of the Normalization Method to Dynamic Fracture Toughness Testing of Alloy 718
Elastic T-Stress Solutions of Embedded Elliptical Cracks Subjected to Uniaxial and Biaxial Loadings
Functional Properties of Nanostructured Ti-50.0 at % Ni Alloys
FDA Recommendations for Nitinol Stent and Endovascular Graft Fatigue Characterization and Fracture Reporting
Development of a Fastener Structural Element Test for Certifying Navy Fastener Materials
An Experimental and Numerical Study of the Fracture Strength of Welded Structural Hollow Section X-Joints
Detection of Crack Initiation by Observations of Free Surface Condition
Constraint Corrected J-R- Curve and Its Application to Fracture Assessment for X80 Pipelines
Development of a Circumferentially Throughwall Cracked Tube Specimen for Fatigue Crack Growth Rate Tests
Observations on Photo-Emission and the Process Zone of a Fatigue Crack
Prediction of Failure in Existing Heart Valve Designs
Comparison of the Corrosion Fatigue Characteristics of 23Mn-21Cr-1Mo Low Nickel, 22Cr-13Ni-5Mn, and 18Cr-14Ni-2.5Mo Stainless Steels
Thermal Residual Stress Relaxation in Powder Metal IN100 Superalloy
Modeling the Formation and Growth of Cracks from Cold-Worked Holes
The Use of Digital Image Correlation to Verify the Behavior of Fiber Metal Laminate Cylinders under Torsional Loading
Volumetric and Surface Positron Annihilation Studies of Fatigue Damage Accumulation in a Steel Alloy
Application of the Reference Temperature to the Evaluation of Cleavage Fracture in HSLA-100 Steel
Creep Crack Growth Predictions in Component Using a Damage Based Approach
Creep Crack Growth Analysis of Welded Joints for High Cr Heat Resisting Steel
Application of Low Plasticity Burnishing (LPB) to Improve the Fatigue Performance of Ti-6Al-4V Femoral Hip Stems
Novel Applications of the Deep-Hole Drilling Technique for Measuring Through-Thickness Residual Stress Distributions
Full-field Laser Shearography Instrumentation for the Detection and Characterization of Fatigue Cracks in Titanium 10-2-3
Influence of Cold Rolling Threads Before or After Heat Treatment on the Fatigue Resistance of High Strength Fine Thread Bolts for Multiple Preload Conditions
Fatigue Strength in Presence of Inhomogeneities: Influence of Constraint
Experimental Evaluation of the J or C^* Parameter for a Range of Cracked Geometries
The Effect of Large Strain Cycling on the Fatigue Strength of Welded Joint
Effect of Tightening Speed on Thread and Under-Head Coefficient of Friction
Influence of Cold Rolling Threads Before or After Heat Treatment on the Fatigue Resistance of High Strength Coarse Thread Bolts for Multiple Preload Conditions
3D FEA Simulations to Assess Residual Stresses in Riveting Processes
Anomalous Fatigue Crack Growth Data Generated Using the ASTM Standards
Simulation on the Decrease in Threshold Stress Intensity Factor (SIF) Range due to High Maximum SIF
Analysis of Creep Crack Initiation and Growth in Different Geometries for 316H and Carbon Manganese Steels
European Code of Practice for Creep Crack Initiation and Growth Testing of Industrially Relevant Specimens
Prediction of Scatter in Creep Crack Growth Data from Creep Failure Strain Properties
Trends in High Temperature Structural Integrity Assessment
Influence of Cold Rolling Threads Before or After Heat Treatment on High Strength Bolts for Different Fatigue Preload Conditions
Surface Roughness, Quasi-Static Fracture, and Cyclic Fatigue Effects on GFRP- and CFRP-Concrete Bonded Interfaces
Temperature Dependence and Variability of Fracture Toughness in the Transition Regime for A508 Grade 4N Pressure Vessel Steel
Use of Miniaturized Compact Tension Specimens for Fracture Toughness Measurements in the Upper Shelf Regime
Analysis of Dynamic Fracture and Crack Arrest of an HSLA Steel in an SE(T) Specimen
Probabilistic Analysis of the Creep Crack Growth Rate of Type 316LN Stainless Steel by the Monte Carlo Simulation
Modelling the Redistribution of Residual Stresses at Elevated Temperature in Components
Structural Reliability Analysis of Railroad Tank Cars Subjected to Fatigue and Corrosion
Load History Effects Resulting from Compression Precracking
A Design Methodology to Take Credit for Residual Stresses in Fatigue Limited Designs
Use of ACR Method to Estimate Closure and Residual Stress Free Small Crack Growth Data
Determination of Crushing Strength of Cenospheres
Size Effect of Microdamage Growth and Its Relation to Macro Fatigue Life
The Effect of Load Reduction Scheme on Crack Closure in the Near-Threshold Regime
Selection of Material for Welded Steel Structures Based on Fracture Mechanics
Fractographic Reassessment of the Significance of Fatigue Crack Closure
A New Method for Opening Load Determination from Compliance Measurements
Assessment for Decrease in Threshold Stress Intensity Factor (SIF) Range Due to High Maximum SIF
Notch-Root Elastic-Plastic Strain-Stress in Particulate Metal Matrix Composites Subjected to General Loading Conditions
Assessment of Plane Stress Tearing in Terms of Various Crack Driving Parameters
Residual Stress Measurements in Welded and Plastically Deformed Target Structural Materials
Effect of Shot Peening on Fatigue Crack Growth in 7075-T7351
Evaluation of Fatigue Crack Thresholds Using Various Experimental Methods
Modeling of Three-Dimensional Effects on Fatigue Crack Closure Processes in Small-Scale Yielding
Ultrasonic Fatigue Testing of Ti-6Al-4V
Fretting Fatigue and Stress Relaxation Behaviors of Shot-Peened Ti-6Al-4V
Crack Initiation, Propagation, and Arrest in 316L Model Pipe Components under Thermal Fatigue
Simulation of Fatigue Crack Propagation in Railway Axles
The Effect of Negative Stress Ratio Load History on High Cycle Fatigue Threshold
Predicting Fatigue Crack Growth in the Residual Stress Field of a Cold Worked Hole
Stress Intensity Factor Analysis and Fatigue Behavior of a Crack in the Residual Stress Field of Welding
Interpretation of Material Hardness, Stress Ratio, and Crack Size Effects on the ΔK^th of Small Cracks Based on Crack Closure Measurement
Analysis of Roughness-Induced Crack-Tip Shielding in Terms of Size Ratio Effect
Influence of Crack-Surface Oxidation on Creep-Fatigue Crack Behavior of 1Cr- and 10Cr-Steels
Temperature Dependent Fracture Toughness of a Single Crystal Nickel Superalloy
Critical Assessment of the Standard ASTM E 399
Effect of Residual Stresses on the Fatigue Crack Propagation in Welded Joints
On the Constraint-Based Failure Assessment of Surface Cracked Plates under Biaxial Loading
Construction of J-R Curves Using the Common and Concise Formats
Environmentally Influenced Fatigue in High Strength Steels
Characterization of Crack Length Measurement Methods for Flat Fracture with Tunneling
Correlation Between Strength and Measured Residual Stress in Tempered Glass Products
Evaluation of the Effect of Crack Tip Constraint on Fatigue Crack Growth Rate in Inconel 718
Effect of Periodic Overloads on Threshold Fatigue Crack Growth in Al-Alloys
Evaluation of the Effect of Biaxial Loading on the T^o Reference Temperature Using a Cruciform Specimen Geometry
Fatigue Crack Growth Rate and Stress-Intensity Factor Corrections for Out-of-Plane Crack Growth
Sensitivity of Creep Crack Initiation and Growth in Plates to Material Properties Variations
Microstructural Influences on the Development and Growth of Small Fatigue Cracks in the Near Threshold Regime
Principles of Variable Amplitude Fatigue Design and Testing
Validation of Complex Wheel/Hub Subassemblies by Multiaxial Laboratory Tests Using Standardized Load Files
A Framework for a Standardization Effort for Fatigue Crack Growth Testing Under Variable Amplitude Spectrum Loading
Variable Amplitude Loading on a Resonance Test Facility
Life Prediction by Observation and Simulation of Short Crack Behavior in a Low Carbon Steel
Large Commercial Aircraft Loading Spectra: Overview and State of the Art
Fatigue Reliability Analysis of an Overload Effect in Welded Joints Including Crack Initiation and Plastic Zone as Random Variables
Periodic Overloads in the Near Threshold Regime
Overload Effects in Aluminum Alloys: Influence of Plasticity and Environment
Multi-Mechanism Synergy in Variable-Amplitude Fatigue
Load History in Fatigue: Effect of Strain Amplitude and Loading Path
Spectrum Fatigue Testing and Small-Crack Life Prediction Analysis on a Coupon Similar to a Critical Design Detail of a CF188 Hornet Component
Variable Amplitude Fatigue Crack Growth Using Digital Signal Processing Technology
Development of a DCPD Calibration for Evaluation of Crack Growth in Corner-Notched, Open-Hole Specimens
A Model for the Inclusion of Notch Plasticity Effects in Fatigue Crack Growth Analysis
Study on Fatigue Design Loads for Ships Based on Crack Growth Analysis
High Cycle Fatigue Testing and Analysis Using Car Standard Sequence
Fuzzy Probabilistic Assessment of Aging Aircraft Structures Subjected to Multiple Site Fatigue Damage
Effect of Overloads and Underloads on Fatigue Crack Growth and Interaction Effects
Calculation of Stress Intensity Factors for Cracks in Structural and Mechanical Components Subjected to Complex Stress Fields
Crack Initiation at a Notch under Constant and Selected Variable Amplitude Loading Conditions
The Prediction of Fatigue Life Distributions from the Analysis of Plain Specimen Data
Probabilistic Fatigue: Computational Simulation
A Software Framework for Probabilistic Fatigue Life Assessment of Gas Turbine Engine Rotors
Extension of a Microstructure-Based Fatigue Crack Growth Model for Predicting Fatigue Life Variability
Fatigue Life Variability Prediction Based on Crack Forming Inclusions in a High Strength Alloy Steel
Corrosion Risk Assessment of Aircraft Structures
A Methodology for Assessing Fatigue Crack Growth Reliability of Railroad Tank Cars
Application of Probabilistic Fracture Mechanics in Structural Design of Magnet Component Parts Operating Under Cyclic Loads at Cryogenic Temperatures
Effect of Individual Component Life Distribution on Engine Life Prediction
Predicting the Reliability of Ceramics Under Transient Loads and Temperatures with CARES/Life
High Cycle Variable Amplitude Fatigue of a Nodular Cast Iron
Effect of Transient Loads on Fatigue Crack Growth in Solution Treated and Aged Ti-62222 at −54, 25, and 175°C
On the Causes of Deviation from the Palmgren-Miner Rule
Prediction of Crack Growth Under Variable-Amplitude and Spectrum Loading in a Titanium Alloy
Crack Growth and Closure Behavior of Short and Long Fatigue Cracks under Random Loading
Degradation Parameters and Two-Stress Block Fatigue of Angle-Ply Carbon Fiber Reinforced Epoxy
Comparison of the Rain Flow Algorithm and the Spectral Method for Fatigue Life Determination Under Uniaxial and Multiaxial Random Loading
Spectrum Coupon Testing of Fatigue-Resistant Fasteners for an Aging Military Aircraft
Fatigue Life of a SG Cast Iron under Real Loading Spectra: Effect of the Correlation Factor Between Bending and Torsion
Comparisons of Analytical Crack Closure Models and Experimental Results Under Flight Spectrum Loading
Application of Moire Interferometry for Mode II Testing of Stitched Composites
Probabilistic Life Prediction Isn't as Easy as It Looks
Modeling Variability in Service Loading Spectra
Scatter in Fatigue Crack Growth Rate in a Directionally Solidified Nickel-Base Superalloy
Mechanism-Based Variability in Fatigue Life of Ti-6Al-2Sn-4Zr-6Mo
Predicting Fatigue Life Under Spectrum Loading in 2024-T3 Aluminum Using a Measured Initial Flaw Size Distribution
Transition Toughness Modeling of Steels Since RKR
A Physics-Based Predictive Model for Fracture Toughness Behavior
Constraint Correction of Fracture Toughness CTOD for Fracture Performance Evaluation of Structural Components
Sensitivity in Creep Crack Growth Predictions of Components Due to Variability in Deriving the Fracture Mechanics Parameter C*
On the Identification of Critical Damage Mechanisms Parameters to Predict the Behavior of Charpy Specimens on the Upper Shelf
Transferability Properties of Local Approach Modeling in the Ductile to Brittle Transition Region
Interface Strength Evaluation of LSI Devices Using the Weibull Stress
Image-Based Characterization and Finite Element Analysis of Porous SMA Behavior
Computational Estimation of Multiaxial Yield Surface Using Microyield Percolation Analysis

Site Map | Online Support | Contact | Web Policies | IP Policy