Technical Committees
/
Committee E07
/
Committee Publications
Journal of Testing and Evaluation
Time Domain Microwave Imaging of a Buried Homogeneous Dielectric Cylinder in a Slab Medium by Asynchronous Particle Swarm Optimization
Feature Assimilation for Vibration Based Damage Detection
Solving an Inverse Scattering Problem of an Embedded Perfectly Conducting Cylinder by Asynchronous Particle Swarm Optimization
Investigation on Characteristics of Internal Structure of Early-age Concrete by Non-destructive Testing
In Situ Eddy-Current Testing on Low-Pressure Turbine Blades of Aircraft Engine
Correlation Analysis of 2D Tomographic Images for Flaw Detection in Pavements
Development of a Novel Test Rig for the Evaluation of Aircraft Fuel Tank Sealant
A Study of Image Reconstruction for Complex Targets Buried in a Slab Medium Using the Unrelated Illumination Method
Inspections of Helicopter Composite Airframe Structures using Conventional and Emerging Nondestructive Testing Methods
An Approach on Damage Detection of Beams Using Operational and Numerical Modal Analyses
Time Domain Inverse Scattering for a Homogenous Dielectric Cylinder by Asynchronous Particle Swarm Optimization
Lamb Waves Technique Applied to the Characterization of Defects in Friction Stir Welding of Aluminum Plates: Comparison with X-Ray and Ultrasonic C-Scan
Network Level Testing for Pavement Structural Evaluation Using a Rolling Wheel Deflectometer
Nondestructive Fatigue Damage Analysis of a Thin Asphalt Concrete Course Using the Wavelet Correlation Method
Integrity Assessment of Water Hydraulic Component by Experimental Method
Study of Underground Oil-Gas Pipeline Corrosion Pits Estimation Based on MFL Inspection Method
Medical Image Semi-fragile Watermarking in the Frequential Field
Testing and evaluation of water hydraulic components by acoustic emission and wavelet analysis
Fault Degradation Assessment of Water Hydraulic Components by Noise Signal with Wavelet Packet Analysis
Experimental Determination of the Effect of Wet/Dry Ballast on Dynamic Railway Sleeper/Ballast Interaction
Thickness Gaging of Thin Plates by Multi-Peak Frequency Decomposition of Lamb Wave Signals
Lineared Inverse Scattering Methods in Elasticity for Shape Reconstruction of Defects
Determination of Elastic Properties by Resonant Technique: A Sensitivity Analysis
A Journal Bearing Test Rig With Reduced
qa
Uncertainty: Some Design Considerations
Fault Classification of Water Hydraulic System by Vibration Analysis with Support Vector Machine
Stress Evaluation of Railroad Forged Wheels by Ultrasonic Testing
An Efficient DCT-Based Cryptocompression Scheme for a Secure and Authentic Medical Image Transmission
Evaluation of the Simulated Material Microstructures Using the Image Processing and Image Analyzing Methods
Ultrasonic Synthetic Aperture Imaging for Correcting the Refraction Artifacts Applied to Angle Beam Immersion Testing
A Digital Image Processing Technique for Quantification of Surface Hot-Shortness Cracks
An Experimental Study of Monitoring Internal Leakage in Water Hydraulic Cylinders Using Acoustic Emission
Low Proof Load Prediction of Ultimate Loads of Fiberglass/Epoxy Resin I-Beams Using Acoustic Emission
Improvement to X-ray Piping Diagnostic System through Simulation (Measuring Thickness of Piping Containing Rust)
Nondestructive Testing of Concrete Pavements for Characterization of Effective Built-In Curling
Three-Dimensional Crack Detection Method for Structures Using Simulated Strain Gages and the Body Force Method
Nondestructive Evaluation of the Dynamic Elastic Moduli of Porous Iron Compacts
Review and Evaluation of Medical Image Segmentation Using Methods of Optimal Filtering
Automatic Classification of Faience Tiles by Artificial Vision
A Review of Watermarking Techniques: Applications, Properties, and Domains
Fatigue Crack Detection with Estimation of Stress Fields Near a Notch Root of Thin Plate Structures in In-Plane Loading
Ultrasonic Attenuation and Velocity in Pearlitic Rail Steel During Fatigue Using Longitudinal Wave Probing
An Acoustical Technique for Determining the Loss Factor of Solid Materials
Nondestructive Evaluation of Fatigue and Creep-Fatigue Damage in 12%Cr Stainless Steel by the Induced Current Focusing Potential Drop Technique
Ultrasonic Technique for Experimental Evaluation of Structural Integrity
The AMES Network Strategy Developments in the 5
th
Euratom Framework Program
A New Assessment Method for the Bulk Modulus and the Poisson's Ratio of Porous Ceramics
Ultrasonic Monitoring of a Low-Temperature Diffusion Bonding Process
Stochastic Resonance in Acoustic Emission
Early Detection of Fatigue Damage Through Ultrasonic Non-Destructive Evaluation—Part II: Experimental
Ultrasonic Signal-Transmission Techniques for Compact Microtunneling Systems
Ultrasonic Measurement of the Dynamic Elastic Moduli of Small Metal Samples
Evaluation of Mechanical Properties of Functionally Graded Materials
Ultrasonic Wave Measurements of Elastic Moduli
E, G,
and μ for Product Development and Design Calculations
Monitoring Crack Advance Using Acoustic Emission and Combined Acoustic Emission and Potential Drop in Zr-2.5% Nb
A PC-Based Near Real-Time Ultrasonic Imaging System for Flaw Characterization
Ultrasonic Stress Evaluation in a Compressor Rotor
An Ultrasonic Technique for Monitoring Automotive Components
Ultrasonic Characterization of Interphasial Properties in Sapphire/Haynes 214 Composites
Effects of Fatigue on Fragility Testing and the Damage Boundary Curve
Leakers as a Function of Closure Type in Gallon-Size Plastic Bottles in Simulated Small Parcel Test Environment
Initial Deformation During Small Punch Testing
Water Leak Testing of Polyurethane Female Condoms
Temperature Dependence of Dynamic Young's Modulus and Mechanical Damping in a Nextel Fiber-Reinforced Glass Composite
Temperature Dependencies of Elasticity Characteristics for Tellurium-Alloyed Gallium Arsenide
An Assessment of the Piezoelectric Ultrasonic Composite Oscillator Technique (PUCOT) for Measuring the Elastic and Technical Constants of Solids
Novel Stage for Ultrasonic Measurement of Real Contact Area Between Rough and Flat Parts Under Quasi-Static Load
Time-Domain Ultrasonic NDE of the Wave Velocity of a Sub-Half-Wavelength Elastic Layer
Ultrasonic Technique for Residual Stress Measurement in Ductile Iron Continuous Cast Round Bars
Time-Domain Ultrasonic Measurement of the Thickness of a Sub-Half-Wavelength Elastic Layer
Magnetic Particle Testing of Turbine Blades Mounted on the Turbine Rotor Shaft
Young's Modulus of a Dispersion Strengthened Al-Fe-V-Si Alloy
In Situ
Ultrasonic Examination of the Intense Pulsed Neutron Source (IPNS) Enriched Uranium Target Assembly
Nonintrusive Test for Argon Gas Content in Windows: Feasibility Study
Nondestructive Density Measurements of Cylindrical Specimens by Gamma-Ray Attenuation
Fatigue Crack Characterization by Ultrasonic Inspection
Imaging Short Fatigue Cracks with the Gel Electrode
Nondestructive Evaluation of In-Service Toughness Degradation for Cr-Mo-V Steam Turbine Rotor Steel
Measurements of Dynamic Young's Modulus in Short Specimens with the PUCOT
Failure Probability Analysis of Proof Loaded Components
Temperature and Composition Dependence of Young's Modulus in Polycrystalline B2 Ni-Al
An Ultrasonic Method for Determining Axial Stress in Bolts
Modulus Measurements in Ordered Co-Al, Fe-Al, and Ni-Al Alloys
A Single-Specimen Determination of
J
Ic
by the Ultrasonic Method and Analysis of Its Statistical Distribution Characteristics
Nondestructive Evaluation of Bond Quality of Bimetallic Strips Using Acoustic Emission
Determination of Threshold Stress Corrosion Cracking Characteristics Using Rising Load
K
Iscc
Testing Based on Ultrasonic Method
Absolute Measurements of Ultrasonic Attenuation Using Damped Nondestructive Testing Transducers
Analysis of Acoustic Emissions Generated During Stress Corrosion Cracking
An Estimation of Hardness of Hardened Steels by X-Ray Diffraction Using a Gaussian Curve-Fitting Method
An X-Ray Diffraction Analysis of Residual Stresses Induced by Sliding Wear of Copper-Aluminum Alloys
Positron Evaluation of Hydrogen in a 17 Nickel Maraging Steel
Introduction to Papers Presented at the Symposium on Ultrasonic Measurements of Stress
Ultrasonic Measurement of Axial Stress
Ultrasonic Measurement of Residual Stress in Textured Materials
Application of Ultrasonic Stress Measurements to Problems in the Electricity Supply Industry
Anharmonic Properties of Solids from Measurements of the Stress Acoustic Constant
An Analytical Approach to Reference Samples for Ultrasonic Residual Stress Measurement
Nondestructive Magnetic Measurements on Prefabricated Parts
Acoustic Emission During Unloading of Elastically Stressed Magnesium Alloy
A Statistical Analysis of X-ray Stress Measurement by the Gaussian Curve-Fitting Method
Evaluation of Assembly Stresses of Automotive Leaf Springs by Acoustic Emission
Infrared Techniques for the Evaluation of Silicon Carbide Heat-Exchanger Tubing
Nondestructive Evaluation of Hygrothermal Effects on Fiber-Reinforced Plastic Laminates
Correlation of Fiber Composite Tensile Strength with the Ultrasonic Stress Wave Factor
Acoustic Emission Monitoring of Weldments
A Phenomenological Description of the Acoustic Emission Response in Several Polycrystalline Materials
Acoustic Emission Monitoring of High-Temperature Cyclic Oxidation Damage in a Titanium-Aluminum-Vanadium Alloy
Fracture Modes and Acoustic Emission of Composite Materials
A Composite Grip Design for Elimination of Extraneous Noise During Acoustic Emission Testing
Acoustic Emission of Plain Concrete
Nondestructive/Destructive Test Correlations and Fracture Mechanics Analysis
Nondestructive Evaluation of Strength Degradation in Glass-Reinforced Plastics as a Result of Environmental Effects
Monitoring Crack Extension in Fracture Toughness Tests by Ultrasonics
Origin of Burst-Type Acoustic Emission in Unflawed 7075-T6 Aluminum
The Feasibility of Ranking Material Fracture Toughness by Ultrasonic Attenuation Measurements
A Note on Pseudo-Acoustic Emission Sources
Acoustic Emission Testing of Unflawed 7075-T6 Aluminum
An Ultrasonic Technique for the Measurement of Residual Stress
Finite Element Modeling of Magnetic Field/Defect Interactions
Signal Processing in Nondestructive Testing
Acoustic Emission Produced During Heating of Tin and Zinc Single Crystals
Comparison of Static and Dynamic Mechanical Properties of Some Epoxy-Matrix Composites
Acoustic Emission Response of Dry Soils
An Acoustical Emission-Damping Fatigue Study of a 17-4 PH Steel
Determination of Resonant Vibration Frequency of Concrete by an Acoustic Impact Technique
Residual Stress Measurement and Analysis Using Ultrasonic Techniques
Evaluation of Composite Failures through Fracture Signal Analysis
Ultrasonic Measurement of Elastic Moduli in Slender Specimens Using Extensional and Torsional Wave Pulses
Direct Nondestructive Prediction of Engineering Properties
