Technical Committees
/
Committee D04
/
Committee Publications
Journal of Testing and Evaluation
Toward Development of a New Thermal Cracking Test Using the Dynamic Shear Rheometer
Effectiveness of Asphalt Rejuvenator
A Laboratory Study to Predict the Rutting and Fatigue Behavior of Asphalt Concrete Using the Indirect Tensile Test
Calibration of Seal Coat Application Rate Design
Thermal Cracking Potential of High RAP-WMA Evaluated With Bending Beam Rheometer Mixture Beam Test
Use of Sweep Test for Emulsion and Hot Asphalt Chip Seals: Laboratory and Field Evaluation
Evaluation of Asphalt Blended With Low Percentage of Carbon Micro-Fiber and Nanoclay
Exploration of a Performance Test for Emulsion Treated Asphalt Surfaces
Rate- and Temperature-Dependent Fracture Characteristics of Asphaltic Paving Mixtures
Fatigue Analysis of Asphalt Concrete under Indirect Tensile Mode of Loading Using Crack Images
Behavior of Selected Warm Mix Asphalt Additive Modified Binders and Prediction of Dynamic Modulus of the Mixes
Performance Evaluation of Asphalt-Rubber Stone Matrix Asphalt Mixtures with Warm Mix Asphalt Additives
Field Performance Assessment of Porous Asphalt Pavement Under Heavy Traffic on Yan-Tong Expressway in China
The Temperature Measuring and Evaluating Methods Based on Infrared Thermal Image for Asphalt-Pavement Construction
A New High Rutting Resistance Asphalt Mixture for Intersection Maintenance under Heavy Traffic
Effect of Vehicle Speed on the Millau Viaduct Response
Pavement Performance of Asphalt Surface Course Containing Reclaimed Asphalt Pavement (RAP)
Interrelationship between Tire Contact Stress and Longitudinal Construction Joint Layout in Pavement
Viscoelastic Performance Analysis of Sulfur-Modified Asphalt Mixture
Effect of Magnesium Sulfate on the Unconfined Compressive Strength of Cement-Treated Soils
State of the Art of Asphalt Surfacings on Long-spanned Orthotropic Steel Decks in China
Study on the Curing Process of Epoxy Asphalt
Virtual Triaxial Test Simulation Based on Discrete Element Method for Shear Resistance Property Assessment of Asphalt Mixtures
Effects of Type and Content of Mineral Fillers on the Consistency Properties of Asphalt Mastic
Investigation into High-Temperature Stability of Asphalt Pavement
Gradation Design of the Aggregate Skeleton in Asphalt Mixture
Relationship between Degree of Anisotropy of Asphalt Concrete and Its Geometrical Parameters
Study of Expressway Axle Load Spectrum Based on Toll Data of Jinghu Expressway
Analysis of the Low-Temperature Rheological Properties of Rubberized Warm Mix Asphalt Binders
A New “Mix-confined” Repeated Load Test for Evaluating Permanent Deformation of Asphalt Mixture
Aging Behaviour and Mechanism of SBS-Modified Asphalt
Research on ERS Steel Deck Pavement Techniques
Laboratory Test and Numerical Simulation of Bond Performance between Basalt Fiber Reinforced Polymer Rebar and Concrete
Choice of Crack Repairing Material for Asphalt Pavement Based on AHP
A Study of the Semi-Perpetual Pavement Performance in Queensland
Research on the Design of AR-AC13S Mixtures
Characterization of Asphalt Mixture Homogeneity Based on X-ray Computed Tomography
Research on Design Method for Heavy-Duty Asphalt Pavements and Its Application
Rutting Mechanism Analysis of Heavy-duty Asphalt Pavement Based on Pavement Survey, Finite Element Simulation, and Instrumentation
Evaluation of Performance on Crumb-Rubber-Modified Asphalt Mixture
Performance Characterization of Bituminous Mixtures With Dolomite Sand Waste and BOF Steel Slag
Analysis of Colombian Bitumen Modified With a Nanocomposite
Preface
Fatigue Crack Assessment of Asphalt Concrete Pavement on a Single Span Highway Bridge Subjected to a Moving Truck
Mechanical Characteristics of Asphaltic Mixtures Containing Titanium-Dioxide Photocatalyst
Comparison of Dynamic Moduli for Asphalt Mixtures Determined from Different Geometries and Compactions
Performance Evaluation of SBS Modified Asphalt with Different Anti-aging Additives
Nonlinear Response Characterization of Bituminous Mortar
Effect of Layered Double Hydroxides (LDHs) on Aging Properties of Bitumen
Comparative Study on Laboratory Performance of Hot- and Warm-mix Asphalt Mixtures
Degradation Behavior and Mechanism of HMA Aggregate
Evaluation of Epoxy Asphalt Concrete Damping Parameters Using Impact Resonance Test
Application of Sessile Drop Method to Determine Surface Free Energy of Asphalt and Aggregate
Research on Structural Performance of Conductive Asphalt Pavement Buried Tubes in Moving Load
High-Temperature Viscosity Performance of Crumb-Rubber-Modified Binder With Warm Mix Asphalt Additives
A Study on Photo-thermal Coupled Aging Kinetics of Bitumen
Effectiveness of Solar Heat Reflective Coatings in Reducing Asphalt Concrete Temperature
Evaluating Laboratory Compaction of Asphalt Mixtures Using the Shear Box Compactor
Mechanical Impedance Measurement on Thin Layer Surface With Impedance Hammer Device
Study on the Intrinsic Viscosity of Bitumen Containing Organo Montmorillonite Nanoclay
Effect of Phase-Change Materials on Thermal and Mechanical Properties of Asphalt Mixtures
Application of the Steam Aging Method to Evaluate the Long-Term Performance of Secondary Materials for Road Construction
A Comparison Study of Friction Measurements for Chip Seal
Laboratory Evaluation of Warm Mix Asphalt Influence on Theoretical Maximum Specific Gravity
Correlation of Flow Number with Stiffness Obtained from Dynamic Shear Rheometer Testing of Extracted Binder from Asphalt Concrete Containing Recycled Asphalt Pavement
Comprehensive Evaluation of Small Strain Viscoelastic Behavior of Asphalt Concrete
Comparison of Shape Parameters for Selected Coarse Aggregates in Oklahoma
Estimation of Optimum Compaction Temperature for PMA and WMA Mixtures by Volumetric Property Evaluation
The Creep Testing Apparatus (CRETA): A New Testing Device for Measuring the Viscoelasticity of Joint Sealant
Evaluation of Air Void Distributions of Cement Asphalt Emulsion Mixes Using an X-Ray Computed Tomography Scanner
Effects of Additives for Warm Mix Asphalt on Performance Grades of Asphalt Binders
A Practical Dynamic Modulus Testing Protocol
Evaluation of Various Test Devices for the Measurements of Aggregates and Asphalt Mixtures’ Specific Gravity
Effects of an Amine Anti-Stripping Agent on Moisture Susceptibility of Sasobit and Aspha-Min Mixes by Surface Free Energy Analysis
Rheological and Rutting Characterization of Asphalt Mixes with Modified Binders
Research of Bituminous MortarFatigue Test Method Based on Dynamic Shear Rheometer
Effect of Silicone Maintenance Materials on Asphalt Binders and Mixtures
Modified Ignition Oven Test Procedure for Determination of Binder Content in Hot Mix Asphalt Containing Dolomite Aggregate
Analysis of Rutting Performance Impacting Factors in HMA Overlay Mixture Design
Development of Specification Limits for Asphalt Pavements Based on Quality Control and Quality Assurance Data
Evaluation of the Fracture Resistance of Asphalt Mixtures Based on Bilinear Cohesive Zone Model
Guide on the Selection of Appropriate Laboratory Stress Levels for the Flow Number Test
CT Image Entropy Analysis Technique for the Determination of Damage to Indirect Tensile Test of Asphalt Mixtures
Effects of Moist Aggregates on the Performance of Warm Mix Asphalt Mixtures Containing Non-Foaming Additives
Correlation Analyses for Implementation of Binder Properties for Rut Potential Estimation of Asphalt Mixtures
Response Behavior of Asphalt Mixtures at Low Temperatures Under Varying Indirect Tensile Test Loading Conditions
Performance Evaluation of Recycled PMA Binders Containing Warm Mix Asphalt Additives
Evaluation of High Temperature Rheological Characteristics of Asphalt Binder with Carbon Nano Particles
Effect of Cement Kiln Dust and Rock Dust as Mineral Fillers on Bulk Specific Gravity of Fine Aggregates
Automated Measurements of Road Cracks Using Line-Scan Imaging
Application of Statistical Methods in Evaluating Asphalt Mixture Homogeneity
Evaluation of the Effects of Asphalt Binder on the Properties of Hot Mix Asphalt at Intermediate Temperatures
Development of a Flattened Indirect Tension Test for Asphalt Concrete
Energy Based Laboratory Fatigue Failure Criteria for Asphalt Materials
Evaluation of Warm Mix Asphalt Mixtures Containing RAP Using Accelerated Loading Tests
Laboratory Investigation of Fatigue Characteristics of Rubberized Asphalt Mixtures Containing Warm Asphalt Additives at a Low Temperature
A New Laboratory Evaluation Method for the Adhesive Performance of Crack Sealants
Laboratory Evaluation of Stone Matrix Asphalt Mixtures with Polyethylene and Cellulose Stabilizers
Development of a Crack Sealant Adhesion Test (CSADT) Specification for Hot-Poured Bituminous Sealants
Application of Dynamic Compaction for Poorly Compacted Embankment
A New Static Strength Test for Characterization of Rutting of Dense-Graded Asphalt Mixtures
Fatigue and Stiffness Evaluations of Reclaimed Asphalt Pavement in Hot Mix Asphalt Mixtures
Alternative Procedure for Determination of Hot Mix Asphalt Creep Compliance
Evaluation of Statistical Validity of Some Asphalt Binder Grade Systems
Geometrical Evaluation and Experimental Verification to Determine Representative Volume Elements of Heterogeneous Asphalt Mixtures
Comparative Study on Recovered Binder Properties Using Three Asphalt Emulsion Recovery Methods
Modeling the Effects of Temperature and Loading Rate on Fatigue Property of Asphalt Binder
Mechanical Behavior of Nanoclay Modified Asphalt Mixtures
Evaluation of Reclaimed Polyethylene-Modified Asphalt Pavements
Using Limited Purchase Specification Tests to Perform Full Linear Viscoelastic Characterization of Asphalt Binder
Methods for Determining the Solubility Parameter of Bitumen
Evaluation of Fiber-Reinforced Asphalt Mixtures Using Advanced Material Characterization Tests
Lessons Learned from RAP Sections with 17 Years of Service
Characterization of the Tensile Properties of Open Graded Friction Course Mixtures Based on Direct and Indirect Tension Tests
A Comparison of Warm Asphalt Binder Aging with Laboratory Aging Procedures
Laboratory Measurement of the Actual Tire-Pavement Contact Pressure Using a Static Test Device
Energy-Based Approach for Determining Flow Number
Evaluation of Engineering Properties of Rubberized Laboratory Mixes Containing Warm Mix Additives
Evaluating Parameters for Characterization of Cracking in Asphalt Concrete
Comparison of Linear Visco-Elastic Complex Modulus and Yield Shear Stress in DSR Moisture Damage Test
Effects of Various Long-Term Aging Procedures on the Rheological Properties of Laboratory Prepared Rubberized Asphalt Binders
Studying of the Dynamic Behavior of Water in a Vibrating Tank
Connected Air Voids Content in Permeable Friction Course Mixtures
Method of Compaction has Significant Effects on Stress-Strain Behavior of Hydraulic Asphalt Concrete
Effects of Binders on Resilient Modulus of Rubberized Mixtures Containing RAP Using Artificial Neural Network Approach
Evaluation of Semicircular Bending Test for Determining Tensile Strength and Stiffness Modulus of Asphalt Mixtures
Determination of Volumetric Properties for Permeable Friction Course Mixtures
Effects of Densification on Permeable Friction Course Mixtures
Influence of Selected Mix Design Factors on the Thermal Behavior of Lightweight Aggregate Asphalt Mixes
Evaluating the Shear Resistance of Hot Mix Asphalt by the Direct Shear Test
Forensic Investigation of Mechanically Stabilized Earth (MSE) Approaches
Determination of Price Reduction Factors for Density-Deficient Asphalt Pavements
A Simple and Effective Laboratory Test Device for Measuring Tire-Pavement Contact Pressure
Interpretation of Complex Modulus Test Results for Asphalt-Aggregate Mixes
Measurement and Evaluation of Asphalt Concrete Thermal Expansion and Contraction
Suitability of Dynamic and Relaxation Tests for the Evaluation of Moisture Susceptibility of Asphalt Mixtures
Characterization of Louisiana Asphalt Mixtures Using Simple Performance Tests
Evaluation of Friction Performance of Coarse Aggregates and Hot-Mix Asphalt Pavements
Experimental Study for Evaluating Crack Retardation of Asphalt Concrete Overlays
Evaluate the Simple Surface Energy of Aggregates Using the Capillary Rise Method
Evaluation of Nonnuclear Density Tests on Hot Mix Asphalt Segregation
Using Rolling Dynamic Deflectometer and Overlay Tester to Determine the Reflective Cracking Potential
Relationship of Aggregate Microtexture to Asphalt Pavement Skid Resistance
Development of a Viscosity Specification for Hot-Poured Bituminous Sealants
Characterization of Thermal Degradation of
qa
Liquid Amine Anti-Strip Additives in Asphalt
qa
Binders Due to RTFO and PAV-Aging
Development of Double Edge Notched Tension (DENT) Test for Asphalt Binders
Methodology of Assessing Testing Variation for Volumetric Quantities in Hot Mix Asphalt Production
Laboratory-based Unified Permanent Deformation Model for Hot-Mix Asphalt Mixtures
Dynamic Modulus of Asphalt Mixtures for Development of Korean Pavement Design Guide
Quantification of Coarse Aggregate Surface Texture Using Image Analysis
Deicer Salt Scaling Resistance of Concrete Containing Manufactured Sands
Effect of Quarry Production Process on Specific Gravities of Aggregates
Effect of Antistrip Additives on Surface Free Energy Characteristics of Asphalt Binders for Moisture-Induced Damage Potential
Characterizing the Asphalt-Aggregate Mixtures Using Rheological Properties of Asphalt Binders
Device Harmonization to Determine Smoothness Specification for Asphalt Pavements
A Procedure to Quantify Organic Antistrip Additives in Asphalt Binders and Mixes
Effect of Bitumen Acid Number on Moisture Susceptibility of Asphalt Mixtures
Application of 3D Laser Scanning on Measuring Pavement Roughness
A Study on Properties of Foamed-Asphalt-Treated Mixes
Utilization of Steel Slag Aggregate for Road Bases
Effects of Air Void Size Distribution, Pore Pressure, and Bond Energy on Moisture Damage
Field and Laboratory Properties of Lime-Treated Cold In-Place Recycled Asphalt Pavements
Development of a Single-Edge Notched Beam Test for Asphalt Concrete Mixtures
Evaluation of Stripping in Bituminous Mixtures Using Conventional and Image Processing Techniques
Estimation of Surface Macrotexture in Hot Mix Asphalt Concrete Pavements Using Laser Texture Data
Analysis of Variability in Pay Factor Systems and Sampling Methods
Quantification of Potentially Odorous Volatile Organic Compounds from Asphalt Binders Using Head-Space Gas Chromatography
Determination of Thermal Properties of Asphalt Mixtures
Influence of Pavement Surface Type on Tire/Pavement Generated Noise
Piezoelectric Sensors for Weigh-In-Motion Systems: An Experimental Insight into Edge Effects
Influence of Hysteretic Heating on Asphalt Fatigue Characterization
Comparative Statistical Analysis of Original and Aged Bituminous Material Viscosity
Mechanistic-Empirical Characterization of Bonding Between Ultra-Thin White-Topping and Asphalt Pavement
An Alternate Method to Determine Asphalt Content of Hot Mix Asphalt Using Volumetric Properties
Evaluation Indicator of Asphalt Mixture Rutting Susceptibility
Porosity of Asphalt Concrete Made With Waste Shredded-Tire Rubber-Modified Binders
Design and Performance of the HEART Wheel Load Simulator
Testing of Bridge Weigh-In-Motion System in a Sub-Arctic Climate
Investigation of Effects of Testing Methods on Characterization of Asphalt Concrete
Influence of the Geometry of the Extrusion Die on the Melt Strength of Polymers
Development of a Procedure to Determine the Effectiveness of Asphalt-Removing Solvents
Optimal Quality Characteristic Evaluation for Asphalt Mixing Plants
Measurement of Aggregate Texture and its Influence on Hot Mix Asphalt (HMA) Permanent Deformation
Spatial and Directional Distribution of Aggregates in Asphalt Mixes
Enhancement of Asphalt Pavement Evaluation Using Monte Carlo Simulation and Accelerated Pavement Testing
Effect of Anisotropy on Compressive and Tensile Properties of Asphalt Mixtures
Influence of Hot-Mix Asphalt Parameters on the Correction Factors of the Ignition Oven Test
Correlating Permanent Deformation Characteristics of Hot Mix Asphalt with Aggregate Geometric Irregularities
The Influence of Laboratory Aging Method on the Rheological Properties of Asphalt Binders
Quantification of Coarse Aggregate Shape and Its Effect on Engineering Properties of Hot-Mix Asphalt Mixtures
Coarse Aggregate Shape and Size Properties Using a New Image Analyzer
Superpave Shear Tester as a Simple Standardized Measure to Evaluate Aggregate-Asphalt Mixture Performance
Evaluation of Density Gradients in Loaded Wheel Tester Samples
Falling-Weight Deflectometer Sensor Location in the Backcalculation of Concrete Pavement Moduli
Network-Level Pavement Deflection Testing and Structural Evaluation
Laboratory Measurements and Analysis of Clogging Mechanism of Porous Asphalt Mixes
Identifying Segregation in Hot Mix Asphalt Pavements Using Rolling Nuclear Gage Measurements and Infrared Imaging
Precision of ASTM D 5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
Comparison and Evaluation of Tests for Coarse Aggregate Particle Shape, Angularity, and Surface Texture
Effect of Asphalt Mix Design Method on Binder and Gradation Selection
Adapting Superpave Technology to Design of Hot Recycled Mixes
Relating Triaxial Test Properties of Asphalt Mixtures to Mix Parameters Determined by Marshall Stability Test
Development of a Road Roughness Profile Delineation Procedure
First Continuous Remote Bridge Monitoring System Ensures Safe Operation of 65-Year-Old Rolling Bascule Bridge
Determination of Thermal Properties of Pavement Materials and Unbound Aggregates by Transient Heat Conduction
Cyclic Tests on High-Strength Prestressed Concrete Frames
Precision of Marshall Stability and Flow Test Using 6-in. (152.4-mm) Diameter Specimens
An Analysis of Hot Mix Asphalt Mat Density Measurements
Comparison of Asphalt Contents Measured with the Nuclear Gage and Extraction Methods
Solvent-Free, Nuclear-Free Determination of Asphalt Content and Gradation of Hot-Mix Asphalt Concrete
An Evaluation of Several Techniques for Measuring Air-void Content in Asphalt Concrete Specimens
Analysis of Marshall Test Behavior with Triaxial Test Determined Material Properties
The Effect of Moisture on Laboratory-Prepared Asphalt Mixtures
Laboratory Wheel Tracking Apparatus for Bituminous Pavement Studies
Comparison of Methods for Measuring Moisture Content of Aggregate and Asphalt-Aggregate Paving Mixtures
Nondestructive Testing: Interpretation of Deflection Bowl for Falling Weight Deflectometer Tests on Flexible Pavements
Additives for Bitumen in Road Construction
Dynamic Properties of Asphalt Concrete
A Suggested Methodology for the Analysis of Asphalt Age-Hardening
A Rapid Test for Asphalt Content of Bituminous Mixtures
A Comprehensive Viscoelasto-Plastic Characterization of Sand-Asphalt Compressive and Tensile Cyclic Loading
Rheology of Cold-Recycled Pavement Materials Using Creep Test
Analysis of Nonlinear Behavior of Asphalt Concrete During Marshall Test
Experimental Analysis and Numerical Simulation of Marshall Method of Asphalt Concrete Mix Design
Laboratory Testing of Asphalt Concrete for Porous Pavements
Quality Control of Tests Conducted on Bituminous Mixtures in Quebec
Void Content Prediction in Two-Size Aggregate Mixes
A Review of Aggregate Selection Criteria for Improved Wear Resistance and Skid Resistance of Bituminous Surfaces
A Modified Procedure for Measuring the Maximum Specific Gravity of Bituminous Paving Mixtures
The Polishing Characteristics of Common Rock Types Used as Aggregate in Bituminous Pavement Surfaces
A Method for the Determination of the Surface Area of Fine Aggregate in Bituminous Mixtures
Behavior of Aggregate in the Washington Degradation Test
Concept and Test Method for a Unified Characterization of the Geometric Irregularity of Aggregate Particles
Red Mud from Alumina Plants as a Possible Source of Synthetic Aggregate
Asphalt Cements: Pen-Vis Number and Its Application to Moduli of Stiffness
Nonlinear Viscoelastic Properties of Bituminous Concretes
Determination of Low Levels of Chloride in Hardened Portland Cement Paste, Mortar, and Concrete
Glass Transition of Asphalts Under Pressure
A Study of Currently Used Methods for Determining the Permeability of Bituminous Mixtures
A Microscopic Approach to the Microstructure of Paving Asphalts
