ASTM International Technical Committee D04 Publications

Product Information

Get Product Updates
Request A Free Catalog
View Catalog

Site Search

Standards Search

Technical Committees / Committee D04 / Committee Publications

Journal of Testing and Evaluation

A Comparison of Warm Asphalt Binder Aging with Laboratory Aging Procedures
Laboratory Measurement of the Actual Tire-Pavement Contact Pressure Using a Static Test Device
Energy-Based Approach for Determining Flow Number
Evaluation of Engineering Properties of Rubberized Laboratory Mixes Containing Warm Mix Additives
Evaluating Parameters for Characterization of Cracking in Asphalt Concrete
Comparison of Linear Visco-Elastic Complex Modulus and Yield Shear Stress in DSR Moisture Damage Test
Effects of Various Long-Term Aging Procedures on the Rheological Properties of Laboratory Prepared Rubberized Asphalt Binders
Studying of the Dynamic Behavior of Water in a Vibrating Tank
Connected Air Voids Content in Permeable Friction Course Mixtures
Method of Compaction has Significant Effects on Stress-Strain Behavior of Hydraulic Asphalt Concrete
Effects of Binders on Resilient Modulus of Rubberized Mixtures Containing RAP Using Artificial Neural Network Approach
Evaluation of Semicircular Bending Test for Determining Tensile Strength and Stiffness Modulus of Asphalt Mixtures
Determination of Volumetric Properties for Permeable Friction Course Mixtures
Effects of Densification on Permeable Friction Course Mixtures
Influence of Selected Mix Design Factors on the Thermal Behavior of Lightweight Aggregate Asphalt Mixes
Evaluating the Shear Resistance of Hot Mix Asphalt by the Direct Shear Test
Forensic Investigation of Mechanically Stabilized Earth (MSE) Approaches
Determination of Price Reduction Factors for Density-Deficient Asphalt Pavements
A Simple and Effective Laboratory Test Device for Measuring Tire-Pavement Contact Pressure
Interpretation of Complex Modulus Test Results for Asphalt-Aggregate Mixes
Measurement and Evaluation of Asphalt Concrete Thermal Expansion and Contraction
Suitability of Dynamic and Relaxation Tests for the Evaluation of Moisture Susceptibility of Asphalt Mixtures
Characterization of Louisiana Asphalt Mixtures Using Simple Performance Tests
Evaluation of Friction Performance of Coarse Aggregates and Hot-Mix Asphalt Pavements
Experimental Study for Evaluating Crack Retardation of Asphalt Concrete Overlays
Evaluate the Simple Surface Energy of Aggregates Using the Capillary Rise Method
Evaluation of Nonnuclear Density Tests on Hot Mix Asphalt Segregation
Using Rolling Dynamic Deflectometer and Overlay Tester to Determine the Reflective Cracking Potential
Relationship of Aggregate Microtexture to Asphalt Pavement Skid Resistance
Development of a Viscosity Specification for Hot-Poured Bituminous Sealants
Characterization of Thermal Degradation ofqa Liquid Amine Anti-Strip Additives in Asphaltqa Binders Due to RTFO and PAV-Aging
Development of Double Edge Notched Tension (DENT) Test for Asphalt Binders
Methodology of Assessing Testing Variation for Volumetric Quantities in Hot Mix Asphalt Production
Laboratory-based Unified Permanent Deformation Model for Hot-Mix Asphalt Mixtures
Dynamic Modulus of Asphalt Mixtures for Development of Korean Pavement Design Guide
Quantification of Coarse Aggregate Surface Texture Using Image Analysis
Deicer Salt Scaling Resistance of Concrete Containing Manufactured Sands
Effect of Quarry Production Process on Specific Gravities of Aggregates
Effect of Antistrip Additives on Surface Free Energy Characteristics of Asphalt Binders for Moisture-Induced Damage Potential
Characterizing the Asphalt-Aggregate Mixtures Using Rheological Properties of Asphalt Binders
Device Harmonization to Determine Smoothness Specification for Asphalt Pavements
A Procedure to Quantify Organic Antistrip Additives in Asphalt Binders and Mixes
Effect of Bitumen Acid Number on Moisture Susceptibility of Asphalt Mixtures
Application of 3D Laser Scanning on Measuring Pavement Roughness
A Study on Properties of Foamed-Asphalt-Treated Mixes
Utilization of Steel Slag Aggregate for Road Bases
Effects of Air Void Size Distribution, Pore Pressure, and Bond Energy on Moisture Damage
Field and Laboratory Properties of Lime-Treated Cold In-Place Recycled Asphalt Pavements
Development of a Single-Edge Notched Beam Test for Asphalt Concrete Mixtures
Evaluation of Stripping in Bituminous Mixtures Using Conventional and Image Processing Techniques
Estimation of Surface Macrotexture in Hot Mix Asphalt Concrete Pavements Using Laser Texture Data
Analysis of Variability in Pay Factor Systems and Sampling Methods
Quantification of Potentially Odorous Volatile Organic Compounds from Asphalt Binders Using Head-Space Gas Chromatography
Determination of Thermal Properties of Asphalt Mixtures
Influence of Pavement Surface Type on Tire/Pavement Generated Noise
Piezoelectric Sensors for Weigh-In-Motion Systems: An Experimental Insight into Edge Effects
Influence of Hysteretic Heating on Asphalt Fatigue Characterization
Comparative Statistical Analysis of Original and Aged Bituminous Material Viscosity
Mechanistic-Empirical Characterization of Bonding Between Ultra-Thin White-Topping and Asphalt Pavement
An Alternate Method to Determine Asphalt Content of Hot Mix Asphalt Using Volumetric Properties
Evaluation Indicator of Asphalt Mixture Rutting Susceptibility
Porosity of Asphalt Concrete Made With Waste Shredded-Tire Rubber-Modified Binders
Design and Performance of the HEART Wheel Load Simulator
Testing of Bridge Weigh-In-Motion System in a Sub-Arctic Climate
Investigation of Effects of Testing Methods on Characterization of Asphalt Concrete
Influence of the Geometry of the Extrusion Die on the Melt Strength of Polymers
Development of a Procedure to Determine the Effectiveness of Asphalt-Removing Solvents
Optimal Quality Characteristic Evaluation for Asphalt Mixing Plants
Measurement of Aggregate Texture and its Influence on Hot Mix Asphalt (HMA) Permanent Deformation
Spatial and Directional Distribution of Aggregates in Asphalt Mixes
Enhancement of Asphalt Pavement Evaluation Using Monte Carlo Simulation and Accelerated Pavement Testing
Effect of Anisotropy on Compressive and Tensile Properties of Asphalt Mixtures
Fatigue Testing and Evaluation of Asphalt Binders Using the Dynamic Shear Rheometer
Influence of Hot-Mix Asphalt Parameters on the Correction Factors of the Ignition Oven Test
Correlating Permanent Deformation Characteristics of Hot Mix Asphalt with Aggregate Geometric Irregularities
The Influence of Laboratory Aging Method on the Rheological Properties of Asphalt Binders
Model-Fitting the Master Curves of the Dynamic Shear Rheometer Data to Extract a Rut-controlling Term for Asphalt Pavements
Quantification of Coarse Aggregate Shape and Its Effect on Engineering Properties of Hot-Mix Asphalt Mixtures
Coarse Aggregate Shape and Size Properties Using a New Image Analyzer
Superpave Shear Tester as a Simple Standardized Measure to Evaluate Aggregate-Asphalt Mixture Performance
Evaluation of Density Gradients in Loaded Wheel Tester Samples
Falling-Weight Deflectometer Sensor Location in the Backcalculation of Concrete Pavement Moduli
Network-Level Pavement Deflection Testing and Structural Evaluation
Laboratory Measurements and Analysis of Clogging Mechanism of Porous Asphalt Mixes
Identifying Segregation in Hot Mix Asphalt Pavements Using Rolling Nuclear Gage Measurements and Infrared Imaging
Precision of ASTM D 5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
Comparison and Evaluation of Tests for Coarse Aggregate Particle Shape, Angularity, and Surface Texture
Effect of Asphalt Mix Design Method on Binder and Gradation Selection
Adapting Superpave Technology to Design of Hot Recycled Mixes
Relating Triaxial Test Properties of Asphalt Mixtures to Mix Parameters Determined by Marshall Stability Test
Development of a Road Roughness Profile Delineation Procedure
First Continuous Remote Bridge Monitoring System Ensures Safe Operation of 65-Year-Old Rolling Bascule Bridge
Determination of Thermal Properties of Pavement Materials and Unbound Aggregates by Transient Heat Conduction
Cyclic Tests on High-Strength Prestressed Concrete Frames
Precision of Marshall Stability and Flow Test Using 6-in. (152.4-mm) Diameter Specimens
An Analysis of Hot Mix Asphalt Mat Density Measurements
Comparison of Asphalt Contents Measured with the Nuclear Gage and Extraction Methods
Solvent-Free, Nuclear-Free Determination of Asphalt Content and Gradation of Hot-Mix Asphalt Concrete
An Evaluation of Several Techniques for Measuring Air-void Content in Asphalt Concrete Specimens
Analysis of Marshall Test Behavior with Triaxial Test Determined Material Properties
The Effect of Moisture on Laboratory-Prepared Asphalt Mixtures
Laboratory Wheel Tracking Apparatus for Bituminous Pavement Studies
Comparison of Methods for Measuring Moisture Content of Aggregate and Asphalt-Aggregate Paving Mixtures
Nondestructive Testing: Interpretation of Deflection Bowl for Falling Weight Deflectometer Tests on Flexible Pavements
Additives for Bitumen in Road Construction
Dynamic Properties of Asphalt Concrete
A Suggested Methodology for the Analysis of Asphalt Age-Hardening
A Rapid Test for Asphalt Content of Bituminous Mixtures
A Comprehensive Viscoelasto-Plastic Characterization of Sand-Asphalt Compressive and Tensile Cyclic Loading
Rheology of Cold-Recycled Pavement Materials Using Creep Test
Analysis of Nonlinear Behavior of Asphalt Concrete During Marshall Test
Experimental Analysis and Numerical Simulation of Marshall Method of Asphalt Concrete Mix Design
Laboratory Testing of Asphalt Concrete for Porous Pavements
Quality Control of Tests Conducted on Bituminous Mixtures in Quebec
Void Content Prediction in Two-Size Aggregate Mixes
A Review of Aggregate Selection Criteria for Improved Wear Resistance and Skid Resistance of Bituminous Surfaces
A Modified Procedure for Measuring the Maximum Specific Gravity of Bituminous Paving Mixtures
The Polishing Characteristics of Common Rock Types Used as Aggregate in Bituminous Pavement Surfaces
A Method for the Determination of the Surface Area of Fine Aggregate in Bituminous Mixtures
Behavior of Aggregate in the Washington Degradation Test
Concept and Test Method for a Unified Characterization of the Geometric Irregularity of Aggregate Particles
Red Mud from Alumina Plants as a Possible Source of Synthetic Aggregate
Asphalt Cements: Pen-Vis Number and Its Application to Moduli of Stiffness
Nonlinear Viscoelastic Properties of Bituminous Concretes
Determination of Low Levels of Chloride in Hardened Portland Cement Paste, Mortar, and Concrete
Glass Transition of Asphalts Under Pressure
A Study of Currently Used Methods for Determining the Permeability of Bituminous Mixtures
A Microscopic Approach to the Microstructure of Paving Asphalts

Site Map | Online Support | Contact | Web Policies | IP Policy