Technical Committees / Committee D02 / Committee Publications

Journal of ASTM International

• Fundamentals of Biobased and Biodegradable Lubricants: A Real World Perspective
• Evaluation of Chlorella Minutissima Oil for Biodiesel Production
• Optimization of Biodiesel Production by Response Surface Methodology and Genetic Algorithm
• Comparison of the Performance of Copper Oxide Nanofluid with Water in Electronic Cooling
• Influence of the Reaction Conditions on the Ester Content and Characterization of Biodiesel via Ethylic Route
• Fuel Quality Assessment of Ethyl Esters Produced from Vegetable Oils and Their Blends With Petroleum Diesel
• Easy Ambient Sonic-Spray Ionization Mass Spectrometry: An Alternative Method to Quantify Organic Impurities in Biodiesel
• Metrological Approach in the Study of Biodiesel Viscosity Variation with Temperature
• Validation of the Performance of Pervious Concrete in a Field Application with Finite Element Analysis
• Characteristics of PAG Based Bio-Hydraulic Fluid
• Cracking Resistance and Impact Wear of Thin and Thick Hard Coatings Under Cyclic Loading
• Use of Vegetable Oils and Animal Oils as Steel Quenchants: A Historical Review—1850-2010
• Application of ECLs and Today’s Legislation
• Characteristics of Base Fluid in Environmentally Acceptable Lubricants
• Luminescent Bacteria as an Indicator Species for Lubricant Formulation Ecotoxicity
• Experiences with ASTM D02 Practices D4378 and D6224 for Turbine Oils and Auxiliary Power Plant Equipment Condition Monitoring Programs
• Thermal Oxidative Stability of Vegetable Oils as Metal Heat Treatment Quenchants
• Analysis of In-Service Lubricating Grease
• Guidelines for Alarm Limits and Trend Analysis
• A New Way to Determine the Biodegradability of Lubricants by a Biokinetic Model
• In-Line Monitoring of Particulate, Color, and Water Content in Lubricating Oils to Facilitate Predictive Maintenance, Reduce Wear, and Provide Real Time Alarming
• Optimizing a Wind Turbine Oil Condition Monitoring Program
• Multielement Analysis of Crude Oils Using Inductively Coupled Plasma-Atomic Emission Spectrometry
• Effect of Antioxidants on Oxidative Stability and Quenching Performance of Soybean Oil and Palm Oil Quenchants
• Compatibility of Vegetable Oil Based Lubricating Greases With Different Mineral Oil Based Greases
• Determination of Kinematic Viscosity of Used Lubricating Oils Using Houillon Viscometer
• The Use of Linear Sweep Voltammetry in Condition Monitoring of Diesel Engine Oil
• Lubricating Oils Evaluation of Dispersancy Capacity of Lubricating Oils and the Impact of Biofuels on Lubricant Dispersancy
• Recent Developments in Online Oil Condition Monitoring Sensors and Alignment with ASTM Methods and Practices
• Polyalkylene Glycols as Next Generation Engine Oils
• Particle Characterization and Sizing: SEM Utilizing Automated Electron Beam and AFA Software for Particle Counting and Particle Characterization
• Microbial Corrosion in Aviation Turbine Fuel (Jet A 1) Transporting Pipeline
• Outstanding Return on Investment When Industrial Plant Lubrication Programs are Supported by International Standards
• USDA Programs to Support Development and Use of Biobased Industrial Products
• An Overview of Progress and New Developments in FTIR Lubricant Condition Monitoring Methodology
• Determination of Mercury in Crude Oil by Atomic Spectroscopy
• Analysis and Prevention of Quenching Failures and Proper Selection of Quenching Media: An Overview
• A Volume of Fluid Phase Change Model on Adaptive Octree Grids
• Performance Characteristics of a Dual Fuel Engine Operated with Mahua Biodiesel and Liquefied Petroleum Gas
• Vehicle Emissions and Fuel Economy Effects of 16 % Butanol and Various Ethanol Blended Fuels (E10, E20, and E85)
• Potentiometric Titration as an Alternative Technique for the Determination of the Iodine Value in Biodiesel Matrix from Palm Oil
• Acid Number Determination of Biodiesel by Potentiometric Titration Using Different Methods
• Current Status of Fire-Resistant Hydraulic Fluids Meeting European Underground Mining Standards
• Monitoring and Blending Biofuels Using a Microfluidic Sensor
• Determination of Ester Content in Different Kinds of Biodiesel
• Analytical Characterization of Sediment Formed in Soy Oil-Based B20 Biodiesel
• The Influence of the Addition of Oils in the Diesel Fuel Density
• Rheological Characterisation and Empirical Modelling of Lead-Free Solder Pastes and Isotropic Conductive Adhesive Pastes
• Experimental Investigations of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine—Part 1: Performance, Emission, and Combustion Characteristics
• Synthetic Jet Fuel Blend Analysis Using Mid-Infrared Spectroscopy
• Development of a Standard Flammability Test for Water-Based Hydraulic Fluids
• Compositional Analysis of Microwave Chemically Treated Biomass Samples
• CO₂-Neutral Fuels and Lubricants Based on Second Generation Oils such as Jatropha
• Determining the Oxidation Stability of Biodiesel and Blends Using a New Rapid Small Scale Oxidation Test (RSSOT)—The PetroOXY
• pH Measurement in Bioethanol by Using Different Electrodes and according to International Standards
• Cold Flow Properties of Biodiesel by Automatic and Manual Analysis Methods
• Challenge of Analytical Characterization of Biofuels
• Calibration Standards for Biodiesel Fuels
• The Potential of Biodiesel Production from Fatty Acid Methyl Esters of Some European/Mediterranean and Cosmopolitan Halophyte Seed Oils
• Synthesis of Biodiesel from Tobacco and Waste Frying Oil Using Heterogeneous KHCO₃/Al₂O₃ Catalyst
• Glycerol Tri-Ester Derivatives as Diluent to Improve Low Temperature Properties of Vegetable Oils
• Standard Reference Data for the Thermophysical Properties of Biofuels
• Experimental Investigation of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine—Part 2: Engine Durability and Effect on Lubricating Oil
• Characterization of Density of Biodiesel from Soybean, Sunflower, Canola, and Beef Tallow in Relation to Temperature, Using a Digital Density Meter with a Metrological Point of View
• Water Content Determination in Biodiesel: Optimization of Methodology in Coulometric Karl Fischer Titration
• A Simple Green Method for Biodiesel Iodine Number Determination
• Lipase-Catalyzed Production of Biodiesel from Tallow
• A Comparison of the Performance of Environmentally Friendly Anhydrous Fire Resistant Hydraulic Fluids
• Addressing the Issue of Fuel Filter Fouling with Recent Changes in Fuel Quality
• The Impact of Fischer–Tropsch Diesel on the Oxidation Stability of Biodiesel (FAME) Blends
• Comparison of Structure and Quenching Performance of Vegetable Oils
• Multielement Analysis of Lubricating Greases with Inductively Coupled Plasma: Atomic Emission Spectrometry
• Minimizing Machining Distortion in Aluminum Alloys through Successful Application of Uphill Quenching—A Process Overview
• Foam Tests for Lubricating Oils: Limitations of Reliability and Reproducibility
• ASTM Proficiency Testing Programs for Biofuels
• Automated Acid Content Determination in Lubricants by FTIR Spectroscopy as an Alternative to Acid Number Determination
• Assessing and Classifying the Fire-Resistance of Industrial Hydraulic Fluids: The Way Ahead?
• Explanation on the Origin of Distortion in Induction Hardened Ring Specimens by Computer Simulation
• Correlation between Cooling Curves Obtained with a Silver Probe and Quenching Properties of 5140 Steel Bars
• Interlaboratory Bias and Uncertainty in the Analysis of Metals and Polychlorinated Biphenyls in Used Oil Samples
• Contaminants in Used Oils and Their Behavior
• Prediction of Barium Sulfate Scale Formation in Oilfield Environment
• Effects of Contamination of Biobased Hydraulic Fluids with Mineral Oil
• The Effects of Lubricant Ingredients on New Hydraulic Oil Cleanliness
• Atomic Force Microscopy of Geroler Motor Wear Debris Ferrograms
• Engine Oil Volatility: Noack Evaporation Methods
• Using Polyalkylene Glycol Quenchants to Effectively Control Distortion and Residual Stresses in Heat Treated Aluminum Alloys
• Study on Antioxidative Synergism of Molybdenum Dialkydithiocarbamate with Alkylated Diphenylamine Antioxidants
• Effects of Contamination on Aerospace Hydraulic Component and System Performance
• Varnish Formation in the Gas Turbine Oil Systems
• Viscometric Temperature Sensitivity of Engine Lubricants at Low Temperature and Moderately High Shear Conditions
• No/Low SAP and Alternative Engine Oil Development and Testing
• ROBO—A Bench Procedure to Replace Sequence IIIGA Engine Test
• Mechanochemical Additive-Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces
• Design of Functionalized PAMA Viscosity Modifiers to Reduce Friction and Wear in Lubricating Oils
• Contamination of Power Generation Lubricants
• Studies of the Oxidation Dynamics of Turbine Oils—Initial Data from a New Form of the Rotating Pressure Vessel Oxidation Test
• The “Practice Relevant Pitting Test”—A New Improved Test Method to Evaluate the Influence of Lubricants on the Pitting Load Capacity of Case Carburized Gears
• Surface Characterization Techniques in Wear of Materials
• Synergistic Tribological Performances of Borate Additive in Lubricants
• Validation of Oxidative Stability of Factory Fill and Alternative Engine Oils Using the Iron Catalyzed Oxidation Test
• A Review of Engine Oil Oxidation Bench Tests and Their Application in the Screening of New Antioxidant Systems for Low Phosphorus Engine Oils
• Study of the ZDDP Antiwear Tribofilm Formed on the DLC Coating Using AFM and XPS Techniques
• Prediction of Strontium Sulfate Scale Formation in Oilfield Environment
• Additive and Base Oil Effects in Automatic Particle Counters
• Modern Turbine Oil Oxidation Performance Limits—Meeting and Measuring Them—A Shell Perspective
• A Method for the Preparation of NIST Traceable Fossil Fuel Standards with Concentrations Intermediate to SRM Values
• Physical, Performance, and Chemical Changes in Turbine Oils from Oxidation
• Statistical Performance of Methods for Measuring Sulfur Concentrations in Ultra Low Sulfur DieselReport from the 2004 Inter-laboratory Crosscheck Program
• Review of Degradation Mechanisms Leading to Sludge and Varnish in Modern Turbine Oil Formulations
• Oxidation Testing of Long-Life Turbine Oil Fluids. Can We Do Better?
• Residue Analysis on RPVOT Test Samples for Single and Multiple Antioxidants Chemistry for Turbine Lubricants
• Evaluation and Comparison Between Oxidation Stability Test Methods for Turbine Oils
• Effect of Coatings-Orientants on Antifriction Properties of Lubricants in Tribounits under Boundary Lubrication
• Oxidation Fundamentals and Its Application to Turbine Oil Testing
• Analysis of Fuels, Lubricants, and Greases Using X-ray Fluorescence Spectrometry
• Mercury Measurements in Fossil Fuels, Particularly Petrochemicals
• Analysis of Gasoline and Diesel Fuel Samples by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Using Pneumatic Nebulizer and Standard Spray Chamber
• The Use of Microwave Digestion and ICP to Determine Elements in Petroleum Samples
• Analysis of the Volatiles Generated During the Selby-Noack Test by ³¹P NMR Spectroscopy
• Improvements in the Determination of Fluorine in Fuel and Lubricants by Oxidative Combustion and Ion-Selective Electrode Detection
• Advances in ICP-MS Technologies for Characterization and Ultra-Trace Speciation as a Tool for the Petroleum Industry
• Direct Trace and Ultra-Trace Metals Determination in Crude Oil and Fractions by Inductively Coupled Plasma Mass Spectrometry
• Latest Improvements on Using Polarized X-Ray Excitation EDXRF for the Analysis of Low Sulfur Content in Automotive Fuel
• Phosphorus Additive Chemistry and Its Effects on the Phosphorus Volatility of Engine Oils
• Rapid Determination of Sulfur in Liquid Hydrocarbons for At-Line Process Applications Using Combustion/Oxidation and UV-Fluorescence Detection
• Sampling and Analysis of Mercury in Crude Oil
• Recent Advances in Gas Chromatographic/Atomic Emission Hetero-Atom Selective Detection for Characterization of Petroleum Streams and Products
• Elemental Analysis of Lubricating Grease by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
• Low-Level Sulfur in Fuel Determination Using Monochromatic WD XRF—ASTM D 7039-04
• Determination of Sulfur Content in Crude Oil Using On-Line X-ray Transmission Technology
• Pyro-Electrochemical On-Line Ultra Low Sulfur Analyzer
• Fuel Analysis by Filter Furnace Electrothermal Atomic Absorption Spectrometry
• DP-SCD and LTMGC for Determination of Low Sulfur Levels in Hydrocarbons
• Determination of Total Mercury in Crude Oil by Combustion Cold Vapor Atomic Absorption Spectrometry (CVAAS)
• Rotrode Filter Spectroscopy: A Recently Improved Method to Detect and Analyze Large Wear and Contaminant Particles in Fluids
• Rheological 3-D Modeling of Scuffing for the EP-Additive Condition
• Zen and the Art (or Is It Science) of a Perfect Analysis
• Trace Levels of Sulfur in the Fuels of the Future: Analytical Perspective