Technical Committees / Committee C24 / Committee Publications

Journal of ASTM International

• Adhesive Joints in Glass and Solar Engineering
• A Systematic Approach to the Study of Accelerated Weathering of Building Joint Sealants
• Weathering Evaluation of Structural Silicone Sealants Used in Korea
• A Review of the Behavior of Structural Silicone Glazing Systems Subjected to a Mega-Earthquake
• The Mechanism of Adhesion Improvement of Elastomeric Silicone Sealants to Difficult-to-Bond Polymeric Substrates through Reactive or Interpenetrating Molecular Brushes
• Evaluating the Impact of a Surprise Silicone Additive to a Synthetic Hydrocarbon Lubricant
• Uncertainties of Responses Calculated with a “Tuned” Library: Geometrical and Algebraic Insights
• Glass Unit Corner Loading—Key Parameter in Durability
• Alpine Skiing, Telemarking, Snowboarding, and Skiboarding Injuries Related to Gender and Ability
• Common Mechanisms of Hip Injury and Associated Hip Pathology in Professional Skiers and Snowboarders
• Bond Strength Between Cast-in-Place Ultra-High-Performance- Concrete and Glass Fibre Reinforced Polymer Plates Using Epoxy Bonded Coarse Silica Sand
• Mechanisms of Asphalt Blistering on Concrete Bridges
• Seismic Racking Test Evaluation of Silicone Used in a Four-Sided Structural Sealant Glazed Curtain Wall System
• Case Studies of Adhesive and Rigid Insulation Board Failures due to Moisture in Low Sloped Roofing Assemblies
• Adhesion of Thermally Sprayed Metallic Coating
• Mechanical Characteristics of Degraded Silicone Bonded Point Supports
• A Test Method for Monitoring Modulus Changes during Durability Tests on Building Joint Sealants
• Moisture Sensitive Adhesives and Flooring Adhesive Failures
• Attempt at Quantification of Surface Degradation and Evaluation of Relationship between Outdoor and Accelerated Exposure of Construction Sealants
• Durability of Acrylic Sealants Applied to Joints of Autoclaved Lightweight Concrete Walls: Evaluation of Exposure Testing
• Evaluation of Sealed Joint Performance for the Selection of Sealants Suitable for Use in Autoclaved Lightweight Concrete Panels
• In Situ Measurement of Compression Set in Building Sealants During Outdoor Aging
• Preliminary Evaluation of the Mechanical Properties and Durability of Transparent Structural Silicone Adhesive (TSSA) for Point Fixing in Glazing
• Ways of Improving the Interfacial Durability of Silicone Adhesives in Building Applications
• Selective Review of Weathering Tests for Sealants and Thoughts on the Development of Novel Test Concept Based on Simultaneous Weathering and Movement
• New Weathering Test Method for Sealants and Preliminary Experimental Results
• Resistance of Adhesive Bonding of Ultra-High Performance Concrete to Hygrothermal, Corrosive, and Freeze-Thaw Cycling Environments
• Field Performance and Accelerated Weathering of High Performance Acrylic and Polyurethane Sealants for Tilt-Up Applications
• Cleaning Silicone Residue from Glass
• Evaluation of the Durability Potential of Silyl Terminated Polyacrylate Based Construction Sealant
• Water Penetration of Cladding Components—Results from Laboratory Tests on Simulated Sealed Vertical and Horizontal Joints of Wall Cladding
• Long-Term Outdoor Weathering Study of Construction Sealants
• An Attempt at Finding a Correlation Between Environmental and Accelerated RILEM TC 139-DBS Weathering for One-Component Polyurethane Sealants Applied on Mortar
• Adhesion Development of Organic and Silicone Sealants on Wet and Dry Concrete
• Joint Sealing Systems for Pavements—A New Approach Towards a Performance Related Evaluation of Capability and Durability
• Using Rheology Test Methods to Assess Durability of Cured Elastomers Undergoing Cyclic Deformation
• Development of Accelerated Aging Test Methodology and Specimen for Bonded CFRP Systems
• Substrate Durability Guidelines Used in Silicone Structural Attachment
• Relative Resistance of Silicone and Si-Hybrid Based Sealants to Alternating Periods of Accelerated Weathering and Thermo-Mechanical Movements
• Quantification of Effect of Enforced Cyclic Movement and Regional Exposure Factors on Weatherability of Construction Sealants
• Evaluation of Silicone Sealants at High Movement Rates Relevant to Bomb Mitigating Window and Curtainwall Design
• Effect of Strain on the Modulus of Sealants Exposed to the Outdoors
• Durability by Design: New Results on Load-Carrying Silicone Bonding
• Effects of Water Immersion on Building and Civil Engineering Joints and the Use of the Arrhenius Method in Predicting Adhesion Lifetime of Water-Immersed Joints
• Study of Weatherability of Construction Sealants with Novel Testing Method
• Proposed Design and Method for Providing Sealed Joint Performance under Relative Story Displacement
• Investigation and Repair of Glazed Brick Cladding: A Case Study
• Interlaboratory Comparison of the Thickness of the Destroyed Surface Layer of Closed-Cell Foam Insulation Specimens
• Determination of Equilibrium Moisture Content of Building Materials: Some Practical Difficulties
• New Durable Sealant of Telechelic Polyacrylate
• Quantification of Differential Thermal Movement in Insulating Glass Edge Seals Using Finite Element Analysis
• Nondestructive Field Testing of Installed Weatherproofing Sealant Joints—Questions and Answers
• Use of Optical Imaging/Image Analysis System for the Quantitative Analysis of Surface Changes Induced by Outdoor Weathering on Sealants
• Durability Testing of Polyurethane Foam Sealant in the Window-Wall Interface
• Reducing Modulus of Sealants to Improve Durability
• Standards Development for Impermeable, Constructible, and Durable Waterproofing
• Reducing Tin and Aminosilane Concentration in Silicone Elastomeric Coating to Improve Its Durability
• Historical Development and Future Prospects of Structural Silicone Sealants in China
• Developing a Performance-Based Joint Sealant Specification for Airport PCC Pavements
• Material Properties for Use in FEA Modeling: Sealant Behavior with Ambient Laboratory Climate Aging
• Effect of Float Glass Surface Composition on Silicone Sealant Adhesion Tested After Simultaneous Exposure to Hot Water and Ultraviolet Light
• Artificial Weathering and Cyclic Movement Test Results Based on the RILEM TC139-DBS Durability Test Method for Construction Sealants
• Issues Related to the Mechanical Property Characterization of Sealants
• Estimation of the Fatigue Resistance of Sealants to Movement at Intersections of Sealed Joints and Improvements in the Joint Design Method
• Concepts for Development of a Service Life Prediction Methodology for Sealed Building and Construction Joints—Review and Roadmap for Future Research
• Durability by Design: Load Carrying Silicone Bonding, Herz Jesu Church, Munich
• Harmonization and Optimization of Weathering Test Methods for Building and Construction Sealants and Adhesives
• Silyl-Terminated Polyurethanes for Construction Sealants