Technical Committees
/
Committee C01
/
Committee Publications
Journal of Testing and Evaluation
Measurement and Prediction of Heat of Hydration of Portland Cement Using Isothermal Conduction Calorimetry
Portland Cement Hydration by Electrical Resistivity Method and Computer Simulation
Application Research on Anti-Cracking Agent for Semi-Rigid Base
Examining Polymerization of Kaolinitic Concrete Using Scanning Electron Microscopy and Raman Spectroscopy
Time-Dependent Rheological Changes of Fly Ash Blended Cement Paste
Chloride Binding Capacity of Cement Paste Containing Layered Double Hydroxide (LDH)
Comparison of Tensile Properties of Strain Hardening Cementitious Composite Cured in Normal and Accelerated Conditions
The Application and Early-Age Behaviors of Continuously Reinforced Bonded Concrete Overlay of Distressed Jointed Concrete Pavements
The Application of Various Indicators for the Estimation of Carbonation and
p
H of Cement Based Materials
On the Evaluation of Setting Time of Cement Paste Based on ASTM C403 Penetration Resistance Test
Effect of Sampling Location on the Air Void Analyzer Test Results on Concrete Pavements: Evaluation of Data from a 16 State-Pooled Fund Project
A Laboratory Study of the Effectiveness of Various Additives on Moisture Susceptibility of Asphalt Mixtures
California Bearing Ratio Behavior of Soil-Stabilized Class F Fly Ash Systems
A Low-Cost, Computer-Controlled Adiabatic Calorimeter for Determining the Heat of Hydration of Concrete
Elastic Strain, Creep, and Recovery in Mortars: Additional Analysis
Monitoring of Cement Stabilized Surrogate Waste Using Resonant Frequency Techniques
Prediction of the Strength of Ceramic Tubular Components: Part I—Analysis
Prediction of the Strength of Ceramic Tubular Components: Part II—Experimental Verification
Effect of Bearing Plate Properties on the Behavior of Block Masonry Prisms under Axial Compression
Gypsum Content of Cements Used in Concrete Cured by Accelerated Methods
Correlation of Strength of Cement Mortar Cured by 28-Day Standard and Accelerated Methods
Past, Present, and Potential Developments of Sulfate-Resisting Concretes
Discussion of “A New Test for Sulfate Resistance of Cements” by P. K. Mehta and O. E. Gjørv
The Effects of Temperature and Relative Humidity on Static Strength of Hydrated Portland Cement
Influence of Calcium Chloride on the Drying Shrinkage of Alite Paste
Base Stabilization Using Pelletized Blast Furnace Slag
A Simple Technique for Determining Relative Strength of Aggregates
Polymeric Materials for Concrete
Mechanisms of Acceleration by Calcium Chloride: A Review
Tricalcium Silicate Hydration in the Presence of Various Salts
A New Test for Sulfate Resistance of Cements
A Study of Cement and Concrete Correlation
Precision of Early Shrinkage Measurements
Some Factors Affecting Cement Mortar Strength Results Using ASTM Standard Test Methods C 348 and C 349
Capillary Porosity in Hardened Cement Paste
