Subcommittees and Standards

Standards under the jurisdiction of D02

Each main committee in ASTM International is composed of subcommittees that address specific segments within the general subject area covered by the technical committee. Click on the subcommittee links below to see the title of existing standards for each subcommittee. Then, click on the resulting titles to see the standard's scope, referenced documents, and more.

D02.01 Combustion Characteristics
D02.01.0A Regional Group Activity
D02.01.0B Precision
D02.01.0C Test Equipment, Procedures, and Instrumentation
D02.01.0E Reference Materials
D02.01.0G Editorial
D02.02 Hydrocarbon Measurement for Custody Transfer (Joint with API)
D02.02.0A Temperature, Density, Physical Properties
D02.02.0B Sampling, Sediment, Water
D02.03 Elemental Analysis
D02.04 Hydrocarbon Analysis
D02.04.0A Preparation of Standard Hydrocarbon Blends
D02.04.0C Liquid Chromatography
D02.04.0D Physical and Chemical Methods
D02.04.0E Editorial
D02.04.0F Absorption Spectroscopic Methods
D02.04.0G Manual on Hydrocarbon Type Analysis
D02.04.0H Chromatographic Distribution Methods
D02.04.0K Correlative Methods
D02.04.0L Gas Chromatography Methods
D02.04.0M Mass Spectroscopy
D02.05 Properties of Fuels, Petroleum Coke and Carbon Material
D02.05.0B Calorimetry of Liquid Hydrocarbon Fuels
D02.05.0C Color and Reactivity
D02.05.0D Petroleum Coke
D02.06 Analysis of Lubricants
D02.06.0D Editorial and Precision
D02.06.0E Quality Improvement
D02.07 Flow Properties
D02.07.0A Newtonian Viscosity
D02.07.0B High Temperature Rheology of Non-Newtonian Fluids
D02.07.0C Low Temperature Rheology of Non-Newtonian Fluids
D02.07.0D Wax-Related Viscometric Properties of Fuels and Oils
D02.08 Volatility
D02.08.01 CS 92 Liaison Task Group
D02.08.0A Distillation
D02.08.0B Flammability
D02.08.0C Crude Distillation
D02.08.0D Vapor Pressure and V/L Ratio
D02.09 Oxidation of Lubricants
D02.09.0C Oxidation of Turbine Oils
D02.09.0D Oxidation of Lubricants
D02.09.0E Oxidation of Greases
D02.09.0G Oxidation Testing of Engine Oils
D02.10 Properties of Petroleum Waxes and Alternative Wax-like Materials
D02.10.0A Physical/Chemical Properties
D02.10.0C Technical Information
D02.11 Engineering Sciences of High Performance Fluids and Solids
D02.12 Environmental Standards for Lubricants
D02.12.01 D6081 Aquatice Toxicity Practice
D02.12.02 D5864
D02.12.03 Manometric Methods for Biodegradation Testing
D02.12.06 Terminology
D02.14 Stability and Cleanliness of Liquid Fuels
D02.25 Performance Assessment and Validation of Process Stream Analyzer Systems
D02.90 Executive
D02.92 Coordinating Subcommittee on Interlaboratory Crosscheck Programs
D02.92.03 Program Management and Communications
D02.93 Coordinating Subcommittee on International Standards and Related Activities
D02.94 Coordinating Subcommittee on Quality Assurance and Statistics
D02.94.01 Task Group A: Quality Assurance and Quality Control
D02.94.02 Task Group B: Statistical Methods & Practices for Evaluation and Comparison of Test Methods
D02.95 Terminology
D02.96 In-Service Lubricant Testing and Condition Monitoring Services
D02.96.01 In-Service Lubricant Viscosity Testing Practices and Techniques
D02.96.02 Chemistry for the Evaluation of In-Service Lubricants
D02.96.03 FTIR Testing Practices and Techniques Related to In-Service Lubricants
D02.96.04 Guidelines for In-Services Lubricants Analysis
D02.96.05 In-Service Lubricants Particle Counting Practices and Techniques
D02.96.06 Practices and Techniques for Prediction and Determination of Microscopic Wear and Wear-related Properties
D02.96.07 Integrated Testers, Instrumentation Techniques for In-Service Lubricants
D02.96.0a Advisory
D02.A0 Gasoline and Oxygenated Fuels
D02.A0.00 Advisory Section
D02.A0.01 Gasoline and Gasoline-Oxygenate Blends
D02.A0.02 Oxygenated Fuels and Components
D02.A0.03 Volatility
D02.A0.04 Editorial
D02.B0 Automotive Lubricants
D02.B0.01 Passenger Car Engine Oils
D02.B0.02 Heavy Duty Engine Oils
D02.B0.03 Automotive Gear Lubricants & Fluids
D02.B0.04 Automotive Greases
D02.B0.06 Two-Stroke Cycle Gasoline
D02.B0.07 Development and Surveillance of Bench Tests Methods
D02.B0.08 Test Monitoring Board
D02.B0.09 Editorial
D02.B0.10 Standards Acceleration
D02.C0 Turbine Oils
D02.C0.01 Turbine Oil Monitoring, Problems and Systems
D02.C0.02 Corrosion and Water/Air Separability
D02.D0 Hydrocarbons for Chemical and Special Uses
D02.D0.02 Ethylene
D02.D0.03 Propylene
D02.D0.04 C4 Hydrocarbons
D02.D0.05 C5 Hydrocarbons
D02.E0 Burner, Diesel, Non-Aviation Gas Turbine, and Marine Fuels
D02.E0.01 Burner Fuels
D02.E0.02 Diesel Fuel Oils
D02.E0.03 Gas Turbine Fuels
D02.E0.07 Marine Fuels
D02.F0 Manufactured Carbon and Graphite Products
D02.G0 Lubricating Grease
D02.G0.01 Chemical and General Laboratory Tests
D02.G0.02 Consistency and Related Rheological Tests
D02.G0.03 Physical Tests
D02.G0.04 Functional Tests - Tribology
D02.G0.05 Functional Tests - Temperature
D02.G0.06 Functional Tests - Contamination
D02.G0.07 Research Techniques
D02.H0 Liquefied Petroleum Gas
D02.J0 Aviation Fuels
D02.J0.01 Jet Fuel Specifications
D02.J0.02 Aviation Gasoline
D02.J0.03 Combustion and Thermal Properties
D02.J0.04 Additives and Electrical Properties
D02.J0.05 Fuel Cleanliness
D02.J0.06 Emerging Turbine Fuels
D02.L0 Industrial Lubricants
D02.L0.01 Machinery Lubricants and Metal Removal Fluids
D02.L0.02 Machinery Lubricants
D02.L0.03 Corrosion Testing of Sheet Fluids Metal Processing Fluids
D02.L0.04 Metal Deformation Fluids and Lubricants
D02.L0.05 Solid Lubricants
D02.L0.06 Non-Lubricating Process Fluids
D02.L0.11 Tribiological Properties of Industrial Fluids and Lubricates
D02.N0 Hydraulic Fluids
D02.N0.02 Industrial Applications
D02.N0.03 ECO - Evaluated Fluids
D02.N0.06 Fire Resistant Fluids
D02.N0.07 Lubricating Properties
D02.N0.08 Thermal Stability
D02.N0.09 Compatibility
D02.N0.10 Specifications
D02.N0.11 Publications
D02.P0 Recycled Products


Back to the Main Committee Page