Subcommittee D01.44 on Traffic Coatings


    Showing results 1-20 of 20 matching ACTIVE standards under the jurisdiction of D01.44     D01 Home

    D711-10 Standard Test Method for No-Pick-Up Time of Traffic Paint

    D713-12 Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials

    D868-10 Standard Practice for Determination of Degree of Bleeding of Traffic Paint

    D913-10 Standard Practice for Evaluating Degree of Traffic Paint Line Wear

    D1155-10 Standard Test Method for Roundness of Glass Spheres

    D1214-10 Standard Test Method for Sieve Analysis of Glass Spheres

    D1309-93(2010) Standard Test Method for Settling Properties of Traffic Paints During Storage

    D2205-85(2010) Standard Guide for Selection of Tests for Traffic Paints

        See also WK33826 proposed revision

    D2743-68(2010) Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography

    D2792-69(2010) Standard Test Method for Solvent and Fuel Resistance of Traffic Paint

    D4796-10 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials

    D4797-12a Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking

    D4960-08(2013) Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials

    D7307-06(2011) Standard Practice for Sampling of Thermoplastic Traffic Marking Materials

    D7308-07(2012) Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials

    D7377-09(2013) Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet

    D7538-09(2013) Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device

    D7539-10 Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints

    D7681-11 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer

    D7735-11e1 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures

    Showing results 1-7 of 7 matching Proposed New Standards under the jurisdiction of D01.44     D01 Home

    WK22312 New Practice for Drum and Tote Sampling of Waterborne Traffic Paint

    WK22333 New Practice for The Determination of Titanium Dioxide and Lead Chromate in Thermoplastic Pavement Marking Materials Using Instrumental X-ray Florescent (XRF) Techniques

    WK33597 New Test Method for Standard Test Method for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer

    WK35519 New Test Method for Evaluation of Retroreflective Composite Optics for Traffic Markings

    WK44187 New Test Method for Izod Impact Testing of Road Marking Thermoplastic

    WK44188 New Test Method for Impact Resistance of Road Marking Thermoplastic over a Highway Substrate by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

    WK44189 New Test Method for Determination of the (Brookfield type) Viscosity of Road Marking Thermoplastic

    D1155-89(1994)e1 Standard Test Method for Roundness of Glass Spheres (Withdrawn 2003)

    D1214-89(1994)e1 Standard Test Method for Sieve Analysis of Glass Spheres (Withdrawn 2002)