Subcommittee C14.04 on Physical and Mechanical Properties


    Showing results 1-22 of 22 matching ACTIVE standards under the jurisdiction of C14.04     C14 Home

    C158-02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)

    C336-71(2010) Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation

    C338-93(2013) Standard Test Method for Softening Point of Glass

    C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending

    C623-92(2010) Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance

    C657-93(2013) Standard Test Method for D-C Volume Resistivity of Glass

    C693-93(2013) Standard Test Method for Density of Glass by Buoyancy

    C729-11 Standard Test Method for Density of Glass by the Sink-Float Comparator

    C730-98(2013) Standard Test Method for Knoop Indentation Hardness of Glass

    C770-98(2013) Standard Test Method for Measurement of Glass Stress—Optical Coefficient

        See also WK37341 proposed revision

    C829-81(2010) Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method

    C965-96(2012) Standard Practice for Measuring Viscosity of Glass Above the Softening Point

    C1256-93(2013) Standard Practice for Interpreting Glass Fracture Surface Features

    C1350M-96(2013) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)

    C1351M-96(2012) Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]

    C1426-14 Standard Practices for Verification and Calibration of Polarimeters

        See also WK41358 proposed revision

    F14-80(2010) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal

    F79-69(2010) Standard Specification for Type 101 Sealing Glass

    F105-72(2010) Standard Specification for Type 58 Borosilicate Sealing Glass

    F140-98(2013) Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods

    F144-80(2010) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods

    F218-13 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass

    0 matching Proposed New Standards under the jurisdiction of C14.04     C14 Home

    0 matching WITHDRAWN standards under the jurisdiction of C14.04     C14 Home