ASTM Advanced Ceramic Standards, by Subject

Monolithics

Mechanical Properties and Performance
C 1161 Uniaxial Flexural Strength (Room Temp.)
C 1211 Uniaxial Flexural Strength (High Temp.)
C 1273 Uniaxial Tensile Strength (Room Temp)
C 1291 Uniaxial Tensile Creep/Creep Rupture
C 1322 Fractography
C 1323 C-Ring Strength (Room Temp)
C 1326 Knoop Hardness
C 1327 Vickers Hardness
C 1361 Cyclic Fatigue in Tension (Room Temp)
C 1366 Uniaxial Tensile Strength (High Temp)
C 1368 Dynamic Fatigue: Slow Crack Growth (Room Temp)
C 1421 Fracture Toughness (Room Temp)
C 1424 Uniaxial Compressive Strength (Room Temp)
C 1465 Dynamic Fatigue: Slow Crack Growth (High Temp)
C 1499 Biaxial Flexural Strength (Room Temp)
C 1525 Thermal Shock Resistance

Elastic Moduli
C 632 Resonance for Glass/Glass Ceramics (E, G, v)
C 1198 Continuous Excitation (E, G, v)
C 1259 Impulse Excitation (E, G, v)

Thermal Properties
C 1470 Guide for Thermal Properties

Electrical Properties
C 2149 Permittivity (Dielectric Contant)

NDE and Design/Reliability
C 1175 NDE Guide
C 1212 NDE Seeded Voids
C 1336 NDE Seeded Inclusions
C 1331 Ultrasonic Velocity
C 1332 Ultrasonic Attenuation
C 1239 Weibull Analysis
C 1495 Effect of Surface Grinding

Powders and Processing
C 958 X-ray Monitoring of Gravity Sedimentation
C 1251 (BET)
C 1274 (BET)
C 1282 Centrifugal Photo Sedimentation
C 1494 Mass Fraction of C, N, O in Si3N4
D 4926 Gamma Alumina Content by X-Ray Powder Diffraction

Composites (CMCs and CFCCs)
C 1275 In-Plane, Tensile Strength (Room Temp)
C 1292 In-Plane and Interlaminar Shear Strength (Room Temp)
C 1337 In-Plane Tensile Creep, Creep Rupture
C 1341 Flexural Strength of Beams (Room and High Temp)
C 1358 In-Plane Compressive Strength (Room Temp)
C 1359 In-Plane Tensile Strength (High Temp)
C 1360 In-Plane Tensile Cyclic Fatigue (Room Temp)
C 1425 Interlaminar Shear Strength (High Temp)
C 1468 Transthickness (interlaminar) Tensile Strength (Room Temp)
C 1469 Shear Strength of Joints (Room Temp)
C 1557 Fiber Strength (Room Temp)

Wear
G 99 Pin on Disk Wear
G 133 Linear Reciproating Wear

Terminology and Classification
C 1145 Terminology
C 1286 Classification

Specifications
D 2442 Aluminum Oxide Electrical/Electronic Applications
F 2094 Silicon Nitride Ball Bearings
F 603 Aluminum Oxide for Surgical Implants
F 1538 Glass Ceramics Biomaterials for Implantation
F 1873 Zirconium Oxide (Y-TZP) for Surgical Implants

Back to the Main Committee Page