Petroleum Collection

**TABLE OF CONTENTS**

*(Standards will be added, revised or withdrawn on an ongoing basis.)*

C559 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

C560 Standard Test Methods for Chemical Analysis of Graphite

C561 Standard Test Method for Ash in a Graphite Sample

C562 Standard Test Method for Moisture in a Graphite Sample

C565 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

C611 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

C625 Standard Practice for Reporting Irradiation Results on Graphite

C651 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

C662 Standard Specification for Impervious Graphite Pipe and Threading

C695 Standard Test Method for Compressive Strength of Carbon and Graphite

C709 Standard Terminology Relating to Manufactured Carbon and Graphite

C714 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

C747 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

C748 Standard Test Method for Rockwell Hardness of Graphite Materials

C749 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite

C769 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus

C781 Standard Practice for Testing Graphite and Boronated Graphite Components for High-Temperature Gas-Cooled Nuclear Reactors

C783 Standard Practice for Core Sampling of Graphite Electrodes

C808 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

C816 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method

C838 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

C886 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

C1025 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite

C1039 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

C1179 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

D56 Standard Test Method for Flash Point by Tag Closed Cup Tester

D61 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

D71 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

D87 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

D91 Standard Test Method for Precipitation Number of Lubricating Oils

D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

D94 Standard Test Methods for Saponification Number of Petroleum Products

D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

D97 Standard Test Method for Pour Point of Petroleum Products

D127 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum

D128 Standard Test Methods for Analysis of Lubricating Grease

D129 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)

D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

D187 Standard Test Method for Burning Quality of Kerosine

D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products

D217 Standard Test Methods for Cone Penetration of Lubricating Grease

D240 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

D287 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

D341 Standard Viscosity-Temperature Charts for Liquid Petroleum Products

D381 Standard Test Method for Gum Content in Fuels by Jet Evaporation

D396 Standard Specification for Fuel Oils

D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

D446 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

D473 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

D482 Standard Test Method for Ash from Petroleum Products

D483 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

D525 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

D565 Standard Test Method for Carbonizable Substances in White Mineral Oil

D566 Standard Test Method for Dropping Point of Lubricating Grease

D611 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

D612 Standard Test Method for Carbonizable Substances in Paraffin Wax

D613 Standard Test Method for Cetane Number of Diesel Fuel Oil

D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

D721 Standard Test Method for Oil Content of Petroleum Waxes

D808 Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)

D873 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)

D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

D892 Standard Test Method for Foaming Characteristics of Lubricating Oils

D893 Standard Test Method for Insolubles In Used Lubricating Oils

D909 Standard Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method

D910 Standard Specification for Aviation Gasolines

D937 Standard Test Method for Cone Penetration of Petrolatum

D938 Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum

D942 Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method

D943 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

D972 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils

D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration

D975 Standard Specification for Diesel Fuel Oils

D976 Standard Test Method for Calculated Cetane Index of Distillate Fuels

D1015 Standard Test Method for Freezing Points of High-Purity Hydrocarbons

D1016 Standard Test Method for Purity of Hydrocarbons from Freezing Points

D1018 Standard Test Method for Hydrogen In Petroleum Fractions

D1025 Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene

D1070 Standard Test Methods for Relative Density of Gaseous Fuels

D1071 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples

D1072 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration

D1091 Standard Test Methods for Phosphorus in Lubricating Oils and Additives

D1092 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases

D1093 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

D1094 Standard Test Method for Water Reaction of Aviation Fuels

D1142 Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature

D1157 Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

D1159 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

D1217 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

D1218 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids

D1250 Standard Guide for Use of the Petroleum Measurement Tables

D1263 Standard Test Method for Leakage Tendencies of Automotive Wheel Bearing Greases

D1264 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

D1265 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)

D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

D1267 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

D1298 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

D1318 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

D1321 Standard Test Method for Needle Penetration of Petroleum Waxes

D1322 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel

D1401 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

D1403 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

D1404/D1404M Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease

D1405 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D1412 Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30°C

D1465 Standard Test Method for Blocking and Picking Points of Petroleum Wax

D1478 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease

D1480 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer

D1481 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer

D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

D1550 Standard ASTM Butadiene Measurement Tables

D1552 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)

D1655 Standard Specification for Aviation Turbine Fuels

D1657 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

D1662 Standard Test Method for Active Sulfur in Cutting Oils

D1742 Standard Test Method for Oil Separation from Lubricating Grease During Storage

D1743 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

D1747 Standard Test Method for Refractive Index of Viscous Materials

D1748 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

D1756 Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal

D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

D1826 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter

D1831 Standard Test Method for Roll Stability of Lubricating Grease

D1832 Standard Test Method for Peroxide Number of Petroleum Wax

D1833 Standard Test Method for Odor of Petroleum Wax

D1835 Standard Specification for Liquefied Petroleum (LP) Gases

D1837 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases

D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

D1839 Standard Test Method for Amyl Nitrate in Diesel Fuels

D1840 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

D1857 Standard Test Method for Fusibility of Coal and Coke Ash

D1945 Standard Test Method for Analysis of Natural Gas by Gas Chromatography

D1946 Standard Practice for Analysis of Reformed Gas by Gas Chromatography

D1977 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis

D1988 Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes

D2001 Standard Test Method for Depentanization of Gasoline and Naphthas

D2007 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method

D2008 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

D2068 Standard Test Method for Filter Plugging Tendency of Distillate Fuel Oils

D2070 Standard Test Method for Thermal Stability of Hydraulic Oils

D2156 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels

D2157 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases From Burning Distillate Fuels

D2158 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

D2161 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

D2162 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

D2265 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range

D2266 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

D2268 Standard Test Method for Analysis of High-Purity *n*-Heptane and *Iso*octane by Capillary Gas Chromatography

D2269 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

D2270 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C

D2272 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

D2273 Standard Test Method for Trace Sediment in Lubricating Oils

D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

D2276 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

D2319 Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

D2320 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

D2361 Standard Test Method for Chlorine in Coal

D2384 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

D2386 Standard Test Method for Freezing Point of Aviation Fuels

D2392 Standard Test Method for Color Of Dyed Aviation Gasolines

D2415 Standard Test Method for Ash in Coal Tar and Pitch

D2416 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

D2420 Standard Test Method for Hydrogen Sulfide In Liquefied Petroleum (LP) Gases (Lead Acetate Method)

D2421 Standard Practice for Interconversion of Analysis of C_{5} and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis

D2422 Standard Classification of Industrial Fluid Lubricants by Viscosity System

D2423 Standard Test Method for Surface Wax on Waxed Paper or Paperboard

D2425 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry

D2426 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

D2427 Standard Test Method for Determination of C

D2492 Standard Test Method for Forms of Sulfur in Coal

D2500 Standard Test Method for Cloud Point of Petroleum Products

D2501 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils

D2502 Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements

D2503 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure

D2504 Standard Test Method for Noncondensable Gases in C_{2} and Lighter Hydrocarbon Products by Gas Chromatography

D2505 Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

D2509 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)

D2510 Standard Test Method for Adhesion of Solid Film Lubricants

D2511 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

D2532 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

D2533 Standard Test Method for Vapor-Liquid Ratio of Spark-Ignition Engine Fuels

D2534 Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings

D2549 Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography

D2593 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

D2595 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range

D2596 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

D2597 Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography

D2598 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis

D2603 Test Method for Sonic Shear Stability of Polymer-Containing Oils

D2619 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

D2625 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)

D2638 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

D2649 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

D2650 Standard Test Method for Chemical Composition of Gases By Mass Spectrometry

D2669 Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)

D2670 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

D2710 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

D2711 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

D2712 Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography

D2713 Standard Test Method for Dryness of Propane (Valve Freeze Method)

D2714 Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

D2715 Standard Test Method for Volatilization Rates of Lubricants in Vacuum

D2717 Standard Test Method for Thermal Conductivity of Liquids

D2764 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

D2766 Standard Test Method for Specific Heat of Liquids and Solids

D2779 Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids

D2780 Standard Test Method for Solubility of Fixed Gases in Liquids

D2782 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)

D2783 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)

D2784 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

D2786 Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry

D2789 Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry

D2878 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

D2879 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

D2880 Standard Specification for Gas Turbine Fuel Oils

D2881 Standard Classification for Metal Working Fluids and Related Materials

D2883 Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials

D2884 Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method

D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

D2889 Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels

D2890 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels

D2892 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

D2893 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

D2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

D2961 Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize

D2962 Standard Test Method for Calculating Volume-Temperature Correction For Coal-Tar Pitches

D2981 Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion

D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

D2983 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer

D3104 Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

D3115 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear

D3117 Standard Test Method for Wax Appearance Point of Distillate Fuels

D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

D3172 Standard Practice for Proximate Analysis of Coal and Coke

D3173 Standard Test Method for Moisture in the Analysis Sample of Coal and Coke

D3174 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal

D3175 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke

D3176 Standard Practice for Ultimate Analysis of Coal and Coke

D3177 Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke

D3178 Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke

D3179 Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke

D3180 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases

D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

D3228 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

D3230 Standard Test Method for Salts in Crude Oil (Electrometric Method)

D3231 Standard Test Method for Phosphorus in Gasoline

D3233 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

D3235 Standard Test Method for Solvent Extractables in Petroleum Waxes

D3236 Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials

D3237 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

D3238 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method

D3239 Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry

D3240 Standard Test Method for Undissolved Water In Aviation Turbine Fuels

D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)

D3242 Standard Test Method for Acidity in Aviation Turbine Fuel

D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

D3245 Standard Test Method for Pumpability of Industrial Fuel Oils

D3246 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

D3302 Standard Test Method for Total Moisture in Coal

D3336 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

D3338 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D3339 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

D3340 Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer

D3341 Standard Test Method for Lead in Gasoline-Iodine Monochloride Method

D3342 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

D3343 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels

D3344 Standard Test Method for Total Wax Content of Corrugated Paperboard

D3348 Standard Test Method for Rapid Field Test for Trace Lead In Unleaded Gasoline (Colorimetric Method)

D3427 Standard Test Method for Air Release Properties of Petroleum Oils

D3429 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids

D3461 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

D3519 Standard Test Method for Foam in Aqueous Media (Blender Test)

D3520 Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method)

D3521 Standard Test Method for Surface Wax Coating On Corrugated Board

D3522 Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing

D3523 Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)

D3524 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

D3525 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography

D3527 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

D3588 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels

D3601 Standard Test Method for Foam In Aqueous Media (Bottle Test)

D3603 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

D3605 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

D3606 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography

D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

D3610 Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method

D3663 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers

D3699 Standard Specification for Kerosine

D3700 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

D3701 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

D3702 Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

D3703 Standard Test Method for Peroxide Number of Aviation Turbine Fuels

D3704 Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

D3705 Standard Test Method for Misting Properties of Lubricating Fluids

D3707 Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method

D3708 Standard Test Method for Weight of Wax Applied During Curtain Coating Operation

D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions

D3710 Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography

D3711 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors

D3712 Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography

D3764 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

D3766 Standard Terminology Relating to Catalysts and Catalysis

D3825 Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique

D3827 Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

D3829 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

D3906 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials

D3907 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

D3908 Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method

D3942 Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite

D3943 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts

D3944 Standard Test Method for Solidification Point of Petroleum Wax

D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

D3956 Standard Specification for Methane Thermophysical Property Tables

D3984 Standard Specification for Ethane Thermophysical Property Tables

D4006 Standard Test Method for Water in Crude Oil by Distillation

D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

D4042 Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils

D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

D4046 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

D4047 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

D4049 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

D4051 Standard Practice for Preparation of Low-Pressure Gas Blends

D4052 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter

D4053 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy

D4054 Standard Practice for Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials

D4055 Standard Test Method for Pentane Insolubles by Membrane Filtration

D4056 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

D4058 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

D4072 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

D4084 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)

D4150 Standard Terminology Relating to Gaseous Fuels

D4164 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers

D4170 Standard Test Method for Fretting Wear Protection by Lubricating Greases

D4171 Standard Specification for Fuel System Icing Inhibitors

D4172 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

D4174 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

D4175 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants

D4176 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

D4178 Standard Practice for Calibrating Moisture Analyzers

D4179 Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes

D4180 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers

D4208 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method

D4222 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements

D4239 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods

D4241 Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems

D4248 Standard Practice for Design of Steam Turbine Generator Oil Systems

D4284 Standard Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion Porosimetry

D4289 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

D4290 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

D4291 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil

D4292 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

D4293 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication

D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry

D4296 Standard Practice for Sampling Pitch

D4304 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines

D4305 Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures

D4306 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

D4307 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

D4308 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

D4310 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

D4312 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

D4362 Standard Specification for Propane Thermophysical Property Tables

D4365 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst

D4377 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration

D4378 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines

D4418 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines

D4419 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

D4422 Standard Test Method for Ash in Analysis of Petroleum Coke

D4423 Standard Test Method for Determination of Carbonyls In C

D4424 Standard Test Method for Butylene Analysis by Gas Chromatography

D4425 Standard Test Method for Oil Separation From Lubricating Grease by Centrifuging (Koppers Method)

D4438 Standard Test Method for Particle Size Distribution of Catalytic Material by Electronic Counting

D4463 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts

D4464 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering

D4468 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry

D4481 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts

D4485 Standard Specification for Performance of Engine Oils

D4486 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

D4512 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder

D4513 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving

D4529 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)

D4539 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

D4567 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

D4625 Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)

D4626 Standard Practice for Calculation of Gas Chromatographic Response Factors

D4627 Standard Test Method for Iron Chip Corrosion for Water—Dilutable Metalworking Fluids

D4628 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry

D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

D4636 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils

D4641 Standard Practice for Calculation of Pore Size Distributions of Catalysts from Nitrogen Desorption Isotherms

D4642 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry

D4650 Standard Specification for Normal Butane Thermophysical Property Tables

D4651 Standard Specification for Isobutane Thermophysical Property Tables

D4682 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

D4683 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator

D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

D4693 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

D4699 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles

D4715 Standard Test Method for Coking Value of Tar and Pitch (Alcan)

D4737 Standard Test Method for Calculated Cetane Index by Four Variable Equation

D4739 Standard Test Method for Base Number Determination by Potentiometric Titration

D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

D4741 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

D4742 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

D4746 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

D4780 Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption

D4781 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles

D4782 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry

D4784 Standard for LNG Density Calculation Models

D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D4807 Standard Test Method for Sediment in Crude Oil by Membrane Filtration

D4808 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

D4809 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

D4810 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes

D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

D4815 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C_{1} to C_{4} Alcohols in Gasoline by Gas Chromatography

D4824 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption

D4857 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

D4858 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

D4859 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC

D4860 Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)

D4863 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants

D4864 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography

D4865 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels

D4870 Standard Test Method for Determination of Total Sediment in Residual Fuels

D4871 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus

D4888 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes

D4891 Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion

D4892 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

D4893 Standard Test Method for Determination of Pitch Volatility

D4898 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis

D4926 Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-ray Powder Diffraction

D4927 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

D4928 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration

D4929 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

D4930 Standard Test Method for Dust Control Material on Calcined Petroleum Coke

D4931 Standard Test Method for Gross Moisture in Green Petroleum Coke

D4950 Standard Classification and Specification of Automotive Service Greases

D4951 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

D4952 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

D4953 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

D4984 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes

D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

D5000 Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor

D5001 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

D5002 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

D5003 Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

D5004 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

D5006 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

D5018 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

D5056 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

D5133 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

D5134 Standard Test Method for Detailed Analysis of Petroleum Naphthas through *n*-Nonane by Capillary Gas Chromatography

D5142 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures

D5153 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption

D5154 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

D5182 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

D5183 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

D5184 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

D5185 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D5186 Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography

D5187 Standard Test Method for Determination of Crystallite Size (L_{c}) of Calcined Petroleum Coke by X-Ray Diffraction

D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)

D5190 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)

D5191 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

D5234 Standard Guide for Analysis of Ethylene Product

D5236 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

D5273 Standard Guide for Analysis of Propylene Concentrates

D5274 Standard Guide for Analysis of 1,3-Butadiene Product

D5275 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

D5287 Standard Practice for Automatic Sampling of Gaseous Fuels

D5291 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

D5292 Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

D5293 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35°C Using the Cold-Cranking Simulator

D5303 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

D5304 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

D5305 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

D5306 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

D5307 Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography

D5357 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-Ray Diffraction

D5372 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

D5373 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke

D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

D5441 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography

D5442 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

D5443 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200°C by Multi-Dimensional Gas Chromatography

D5452 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

D5454 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers

D5481 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

D5482 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric)

D5483 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

D5500 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D5501 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography

D5502 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

D5503 Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation

D5504 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

D5534 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

D5579 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

D5580 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, *p/m*-Xylene, *o*-Xylene, C_{9} and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

D5598 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

D5599 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection

D5600 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D5619 Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine

D5620 Standard Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and Vee Block Test Machine

D5621 Standard Test Method for Sonic Shear Stability of Hydraulic Fluid

D5622 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

D5623 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

D5662 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

D5704 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

D5705 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

D5706 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine

D5707 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

D5709 Standard Test Method for Sieve Analysis of Petroleum Coke

D5757 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets

D5758 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction

D5760 Standard Specification for Performance of Manual Transmission Gear Lubricants

D5761 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

D5762 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

D5763 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

D5769 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

D5770 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)

D5772 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)

D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines

D5798 Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines

D5799 Standard Test Method for Determination of Peroxides in Butadiene

D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

D5842 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

D5845 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and *tert*-Butanol in Gasoline by Infrared Spectroscopy

D5846 Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus

D5853 Standard Test Method for Pour Point of Crude Oils

D5854 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

D5862 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine

D5863 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

D5864 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

D5865 Standard Test Method for Gross Calorific Value of Coal and Coke

D5901 Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method)

D5949 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

D5954 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy

D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

D5968 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C

D5969 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

D5972 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

D5985 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

D5986 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C

D6006 Standard Guide for Assessing Biodegradability of Hydraulic Fluids

D6021 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

D6022 Standard Practice for Calculation of Permanent Shear Stability Index

D6045 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

D6046 Standard Classification of Hydraulic Fluids for Environmental Impact

D6074 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

D6078 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

D6080 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

D6081 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

D6082 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

D6120 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

D6121 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

D6122 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers

D6138 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

D6139 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask

D6158 Standard Specification for Mineral Hydraulic Oils

D6159 Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

D6160 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

D6175 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles

D6184 Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)

D6185 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

D6186 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

D6200 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

D6201 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D6202 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine

D6203 Standard Test Method for Thermal Stability of Way Lubricants

D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

D6224 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

D6227 Standard Specification for Grade 82 Unleaded Aviation Gasoline

D6228 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

D6258 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

D6259 Standard Practice for Determination of a Pooled Limit of Quantitation

D6273 Standard Test Methods for Natural Gas Odor Intensity

D6277 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

D6278 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

D6293 Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography

D6296 Standard Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multi-dimensional Gas Chromatography

D6299 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance

D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration

D6334 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

D6335 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

D6350 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy

D6351 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

D6352 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography

D6353 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

D6354 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

D6374 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

D6375 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

D6376 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy

D6377 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR_{x} (Expansion Method)

D6378 Standard Test Method for Determination of Vapor Pressure (VP_{X}) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

D6379 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

D6384 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants

D6417 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

D6421 Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

D6422 Standard Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends

D6423 Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)

D6424 Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

D6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

D6439 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

D6443 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

D6445 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry

D6446 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels

D6447 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

D6450 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

D6468 Standard Test Method for High Temperature Stability of Distillate Fuels

D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

D6470 Standard Test Method for Salt in Crude Oils (Potentiometric Method)

D6481 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

D6482 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

D6483 Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine

D6514 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils

D6546 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

D6547 Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple

D6549 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

D6550 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

D6553 Standard Test Method for Coolant Compatibility of Way Lubricants

D6557 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

D6558 Standard Test Method for Determination of TGA CO

D6559 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

D6584 Standard Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters By Gas Chromatography

D6591 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates-High Performance Liquid Chromatography Method with Refractive Index Detection

D6593 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

D6594 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C

D6595 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

D6596 Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials

D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

D6616 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100°C

D6617 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

D6618 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

D6624 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

D6666 Standard Guide for Evaluation of Aqueous Polymer Quenchants

D6667 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

D6668 Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure

D6708 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

D6710 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

D6728 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

D6729 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Meter Capillary High Resolution Gas Chromatography

D6730 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

D6731 Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer

D6732 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

D6733 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

D6743 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

D6744 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

D6745 Standard Test Method for Linear Thermal Expansion of Electrode Carbons

D6748 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

D6749 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine-1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

D6756 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

D6761 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

D6791 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

D6792 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories

D6793 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

D6794 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time

D6795 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time

D6810 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry

D6811 Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)^{1, 2}

D6812 Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

D6813 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps

D6821 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

D6822 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

D6837 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

D6838 Standard Test Method for Cummins M11 High Soot Test

D6839 Standard Test Method for Hydrocarbon Types, Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography

D6849 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

D6892 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

D6895 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C

D6896 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

D6897 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

D6898 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

D6920 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

D6922 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

D6968 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

D6969 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

D6970 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis

D6971 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

D6974 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

D6975 Standard Test Method for Cummins M11 EGR Test

D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

D6985 Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications

D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)

D6987/D6987M Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

D7038 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

D7039 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D7040 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection

D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

D7043 Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

D7044 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids

D7058 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

D7059 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography

D7060 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

D7061 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

D7084 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers

D7085 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)

D7094 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

D7096 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography

D7097 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT

D7098 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B

D7109 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles

D7110 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures

D7111 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7112 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

D7152 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products

D7153 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

D7154 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

D7155 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

D7169 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography

D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils-Fixed Range Injection Period, Constant Volume Combustion Chamber Method

D7171 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

D7206 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals

D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

D7213 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography

D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

D7217 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D7219 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites

D7220 Standard Test Method for Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry

D7223 Standard Specification for Aviation Certification Turbine Fuel

D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-type Aviation Turbine Fuels Containing Additives by Portable Separometer

D7235 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices

D7236 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

D7260 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

D7261 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

D7265 Standard Specification for Hydrogen Thermophysical Property Tables

D7278 Standard Guide for Prediction of Analyzer Sample System Lag Times

D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

D7280 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

D7303 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

D7317 Standard Test Method for Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

D7328 Standard Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection