ASTM Standards Source (Online and DVD-ROM):
Paints Collection

Return to Previous Page

TABLE OF CONTENTS
(Standards will be added, revised or withdrawn on an ongoing basis.)

A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A20/A20M Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A27/A27M Standard Specification for Steel Castings, Carbon, for General Application
A29/A29M Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
A36/A36M Standard Specification for Carbon Structural Steel
A47/A47M Standard Specification for Ferritic Malleable Iron Castings
A48/A48M Standard Specification for Gray Iron Castings
A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications
A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes
A167 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A178/A178M Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A179/A179M Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A181/A181M Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A192/A192M Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A203/A203M Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A204/A204M Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A209/A209M Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A210/A210M Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A214/A214M Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A216/A216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A217/A217M Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A250/A250M Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
A268/A268M Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A269 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A276 Standard Specification for Stainless Steel Bars and Shapes
A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A285/A285M Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A297/A297M Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A307 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A336/A336M Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A350/A350M Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
A352/A352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A358/A358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A387/A387M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A409/A409M Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A420/A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A450/A450M Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A489 Standard Specification for Carbon Steel Lifting Eyes
A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy
A515/A515M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A516/A516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A532/A532M Standard Specification for Abrasion-Resistant Cast Irons
A536 Standard Specification for Ductile Iron Castings
A542/A542M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
A560/A560M Standard Specification for Castings, Chromium-Nickel Alloy
A563 Standard Specification for Carbon and Alloy Steel Nuts
A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A574 Standard Specification for Alloy Steel Socket-Head Cap Screws
A576 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A587 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings
A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A788/A788M Standard Specification for Steel Forgings, General Requirements
A789/A789M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A813/A813M Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A890/A890M Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A928/A928M Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
A1017/A1017M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
A1041/A1041M Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten

B42 Standard Specification for Seamless Copper Pipe, Standard Sizes
B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed
B75/B75M Standard Specification for Seamless Copper Tube
B88 Standard Specification for Seamless Copper Water Tube
B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings
B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
B148 Standard Specification for Aluminum-Bronze Sand Castings
B160 Standard Specification for Nickel Rod and Bar
B161 Standard Specification for Nickel Seamless Pipe and Tube
B162 Standard Specification for Nickel Plate, Sheet, and Strip
B163 Standard Specification for Seamless Nickel and Nickel Alloy (UNS N06845) Condenser and Heat-Exchanger Tubes
B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
B165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an
B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B234 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
B315 Standard Specification for Seamless Copper Alloy Pipe and Tube
B333 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets
B359/B359M Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
B361 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
B363 Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
B365 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
B366 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
B367 Standard Specification for Titanium and Titanium Alloy Castings
B381 Standard Specification for Titanium and Titanium Alloy Forgings
B386 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
B387 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
B392 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
B393 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
B394 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
B395/B395M Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
B407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
B408 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B409 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
B423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube
B424 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip
B425 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar
B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
B444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
B446 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
B462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,
B463 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip
B464 Standard Specification for Welded UNS N08020 Alloy Pipe
B466/B466M Standard Specification for Seamless Copper-Nickel Pipe and Tube
B473 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
B493/B493M Standard Specification for Zirconium and Zirconium Alloy Forgings
B514 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
B517 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
B521 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
B523/B523M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
B550/B550M Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
B551/B551M Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
B574 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten
B575 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium
B582 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
B614 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
B619 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
B625 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
B626 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
B640 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
B653/B653M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
B658/B658M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
B673 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
B674 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
B675 Standard Specification for UNS N08367 Welded Pipe
B677 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
B688 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
B691 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
B704 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
B705 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
B708 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
B729 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
B751 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
B760 Standard Specification for Tungsten Plate, Sheet, and Foil
B775 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe
B863 Standard Specification for Titanium and Titanium Alloy Wire
B891 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
B898 Standard Specification for Reactive and Refractory Metal Clad Plate
B906 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

C722 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications
D34 Standard Guide for Chemical Analysis of White Pigments
D49 Standard Test Methods of Chemical Analysis of Red Lead
D50 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
D79 Standard Specification for Zinc Oxide Pigments
D81 Standard Specification for Basic Carbonate White Lead Pigment
D83 Standard Specification for Red Lead Pigment
D85 Standard Specification for Ochre Pigment
D126 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
D153 Standard Test Methods for Specific Gravity of Pigments
D154 Standard Guide for Testing Varnishes
D185 Standard Test Methods for Coarse Particles in Pigments
D209 Standard Specification for Lampblack Pigment
D210 Standard Specification for Bone Black Pigment
D211 Standard Specification for Chrome Yellow and Chrome Orange Pigments
D233 Standard Test Methods of Sampling and Testing Turpentine
D235 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
D263 Standard Specification for Chrome Oxide Green Pigment
D267 Standard Specification for Gold Bronze Powder
D268 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
D269 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
D279 Standard Test Methods for Bleeding of Pigments
D280 Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
D281 Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out
D304 Standard Specification for n-Butyl Alcohol (Butanol)
D305 Standard Test Method for Solvent-Extractable Material in Black Pigments
D329 Standard Specification for Acetone
D330 Standard Specification for 2-Butoxyethanol
D331 Standard Specification for 2-Ethoxyethanol
D332 Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation
D333 Standard Guide for Clear and Pigmented Lacquers
D344 Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
D358 Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings
D365 Standard Guide for Soluble Nitrocellulose Base Solutions
D387 Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
D444 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
D464 Standard Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products
D465 Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products
D476 Standard Classification for Dry Pigmentary Titanium Dioxide Products
D478 Standard Specification for Zinc Yellow (Zinc Chromate) Pigments
D480 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
D509 Standard Test Methods of Sampling and Grading Rosin
D520 Standard Specification for Zinc Dust Pigment
D521 Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
D522 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
D523 Standard Test Method for Specular Gloss
D561 Standard Specification for Carbon Black Pigment for Paint
D562 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
D564 Standard Test Methods for Liquid Paint Driers
D600 Standard Specification for Liquid Paint Driers
D602 Standard Specification for Barium Sulfate Pigments
D605 Standard Specification for Magnesium Silicate Pigment (Talc)
D607 Standard Specification for Wet Ground Mica Pigments
D608 Standard Specification for Dibutyl Phthalate
D609 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
D610 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
D660 Standard Test Method for Evaluating Degree of Checking of Exterior Paints
D661 Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
D662 Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
D711 Standard Test Method for No-Pick-Up Time of Traffic Paint
D713 Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
D714 Standard Test Method for Evaluating Degree of Blistering of Paints
D715 Standard Test Methods for Analysis of Barium Sulfate Pigment
D716 Standard Test Methods for Evaluating Mica Pigment
D717 Standard Test Methods for Analysis of Magnesium Silicate Pigment
D718 Standard Test Methods for Analysis of Aluminum Silicate Pigment
D740 Standard Specification for Methyl Ethyl Ketone
D763 Standard Specification for Raw and Burnt Umber Pigments
D765 Standard Specification for Raw and Burnt Sienna Pigments
D768 Standard Specification for Yellow Iron Oxide Hydrated
D769 Standard Specification for Black Synthetic Iron Oxide
D770 Standard Specification for Isopropyl Alcohol
D772 Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
D801 Standard Test Methods for Sampling and Testing Dipentene
D802 Standard Test Methods for Sampling and Testing Pine Oils
D803 Standard Test Methods for Testing Tall Oil
D804 Standard Terminology Relating to Naval Stores, Including Tall Oil and Related Products
D817 Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
D822 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
D841 Standard Specification for Nitration Grade Toluene
D843 Standard Specification for Nitration Grade Xylene
D847 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
D848 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
D849 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
D850 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
D852 Standard Test Method for Solidification Point of Benzene
D853 Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
D868 Standard Practice for Determination of Degree of Bleeding of Traffic Paint
D869 Standard Test Method for Evaluating Degree of Settling of Paint
D870 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
D871 Standard Test Methods of Testing Cellulose Acetate
D889 Standard Test Method for Volatile Oil in Rosin
D890 Standard Test Method for Water in Liquid Naval Stores
D913 Standard Practice for Evaluating Degree of Traffic Paint Line Wear
D914 Standard Test Methods for Ethylcellulose
D962 Standard Specification for Aluminum Powder and Paste Pigments for Paints
D964 Standard Specification for Metallic Copper Powder for Use in Antifouling Paints
D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
D1006 Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
D1007 Standard Specification for sec-Butyl Alcohol
D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
D1065 Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
D1078 Standard Test Method for Distillation Range of Volatile Organic Liquids
D1133 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
D1135 Standard Test Methods for Chemical Analysis of Blue Pigments
D1152 Standard Specification for Methanol (Methyl Alcohol)
D1153 Standard Specification for Methyl Isobutyl Ketone
D1155 Standard Test Method for Roundness of Glass Spheres
D1199 Standard Specification for Calcium Carbonate Pigments
D1200 Standard Test Method for Viscosity by Ford Viscosity Cup
D1208 Standard Test Methods for Common Properties of Certain Pigments
D1209 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
D1210 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
D1212 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
D1214 Standard Test Method for Sieve Analysis of Glass Spheres
D1240 Standard Test Methods for Rosin Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
D1257 Standard Specification for High-Gravity Glycerin
D1259 Standard Test Methods for Nonvolatile Content of Resin Solutions
D1296 Standard Test Method for Odor of Volatile Solvents and Diluents
D1301 Standard Test Methods for Chemical Analysis of White Lead Pigments
D1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
D1309 Standard Test Method for Settling Properties of Traffic Paints During Storage
D1310 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
D1316 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
D1331 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
D1343 Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
D1348 Standard Test Methods for Moisture in Cellulose
D1353 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
D1360 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
D1363 Standard Test Method for Permanganate Time of Acetone and Methanol
D1364 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
D1366 Standard Practice for Reporting Particle Size Characteristics of Pigments
D1394 Standard Test Methods for Chemical Analysis of White Titanium Pigments
D1439 Standard Test Methods for Sodium Carboxymethylcellulose
D1474 Standard Test Methods for Indentation Hardness of Organic Coatings
D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
D1476 Standard Test Method for Heptane Miscibility of Lacquer Solvents
D1483 Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method
D1492 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
D1535 Standard Practice for Specifying Color by the Munsell System
D1544 Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
D1545 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
D1555M Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
D1555 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
D1585 Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
D1613 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
D1614 Standard Test Method for Alkalinity in Acetone
D1617 Standard Test Method for Ester Value of Solvents and Thinners
D1631 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
D1640 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
D1641 Standard Practice for Conducting Outdoor Exposure Tests of Varnishes
D1644 Standard Test Methods for Nonvolatile Content of Varnishes
D1648 Standard Specification for Basic Lead Silicochromate Pigment
D1649 Standard Specification for Strontium Chromate Pigment
D1652 Standard Test Method for Epoxy Content of Epoxy Resins
D1653 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
D1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
D1686 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
D1695 Standard Terminology of Cellulose and Cellulose Derivatives
D1696 Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
D1718 Standard Specification for Isobutyl Acetate (95% Grade)
D1719 Standard Specification for Isobutyl Alcoholl
D1720 Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
D1721 Standard Test Method for Permanganate Time of Tricresyl Phosphate
D1722 Standard Test Method for Water Miscibility of Water-Soluble Solvents
D1725 Standard Test Method for Viscosity of Resin Solutions
D1726 Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
D1729 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
D1734 Standard Practice for Making Cementitious Panels for Testing Coatings
D1735 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
D1785 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
D1795 Standard Test Method for Intrinsic Viscosity of Cellulose
D1836 Standard Specification for Commercial Hexanes
D1844 Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate
D1845 Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment
D1849 Standard Test Method for Package Stability of Paint
D1926 Standard Test Methods for Carboxyl Content of Cellulose
D1969 Standard Specification for 2-Ethylhexanol
D1978 Standard Guide for Analysis of Electrocoat Bath Samples
D1981 Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids
D1982 Standard Test Method for Titer of Fatty Acids
D2064 Standard Test Method for Print Resistance of Architectural Paints
D2065 : Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
D2066 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
D2067 Standard Test Method for Coarse Particles in Printing Ink Dispersions
D2074 Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
D2086 Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde
D2087 Standard Test Method for Iron in Formaldehyde Solutions
D2091 Standard Test Method for Print Resistance of Lacquers
D2119 Standard Test Method for Aldehydes in Styrene Monomer
D2121 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
D2134 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
D2190 Standard Specification for Vinyl Acetate
D2191 Standard Test Method for Acetaldehyde Content of Vinyl Acetate
D2192 Standard Test Method for Purity of Aldehydes and Ketones
D2193 Standard Test Method for Hydroquinone in Vinyl Acetate
D2194 Standard Test Method for Concentration of Formaldehyde Solutions
D2196 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
D2197 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
D2199 Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers
D2200 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces
D2201 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
D2205 Standard Guide for Selection of Tests for Traffic Paints
D2218 Standard Specification for Molybdate Orange Pigments
D2241 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
D2243 Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
D2245 Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints
D2247 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
D2248 Standard Practice for Detergent Resistance of Organic Finishes
D2337 Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
D2338 Standard Test Method for Determining Particle Size of Multicolor Lacquers
D2340 Standard Test Method for Peroxides in Styrene Monomer
D2349 Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
D2350 Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints
D2351 Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints
D2352 Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints
D2354 Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
D2359 Standard Specification for Refined Benzene-535
D2360 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
D2363 Standard Test Methods for Hydroxypropyl Methylcellulose
D2364 Standard Test Methods for Hydroxyethylcellulose
D2369 Standard Test Method for Volatile Content of Coatings
D2370 Standard Test Method for Tensile Properties of Organic Coatings
D2371 Standard Test Method for Pigment Content of Solvent-Reducible Paints
D2372 Standard Practice for Separation of Vehicle From Solvent-Reducible Paints
D2373 Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method
D2374 Standard Test Method for Lead in Paint Driers by EDTA Method
D2375 Standard Test Method for Manganese in Paint Driers by EDTA Method
D2378 Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited
D2379 Standard Test Method for Acidity of Formaldehyde Solutions
D2380 Standard Test Method for Methanol Content of Formaldehyde Solutions
D2439 Standard Specification for Refined Phenol
D2448 Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
D2454 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
D2466 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
D2467 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2485 Standard Test Methods for Evaluating Coatings For High Temperature Service
D2486 Standard Test Methods for Scrub Resistance of Wall Paints
D2572 Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
D2574 Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
D2613 Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
D2621 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
D2627 Standard Specification for Diacetone Alcohol
D2634 Standard Specification for Methyl Amyl Acetate (95 % Grade)
D2635 Standard Specification for Methyl Isobutyl Carbinol
D2636 Standard Specification for Hexylene Glycol
D2693 Standard Specification for Ethylene Glycol
D2694 Standard Specification for Diethylene Glycol
D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
D2698 Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
D2743 Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
D2745 Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
D2792 Standard Test Method for Solvent and Fuel Resistance of Traffic Paint
D2793 Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
D2803 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
D2804 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
D2805 Standard Test Method for Hiding Power of Paints by Reflectometry
D2827 Standard Specification for Styrene Monomer
D2832 Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
D2846/D2846M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
D2916 Standard Specification for Isophorone
D2917 Standard Specification for Methyl Isoamyl Ketone
D2921 Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
D2929 Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence
D2967 Standard Test Method for Corner Coverage of Powder Coatings
D3002 Standard Guide for Evaluation of Coatings Applied to Plastics
D3003 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
D3021 Standard Specification for Phthalocyanine Green Pigments
D3022 Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
D3023 Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
D3034 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D3125 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
D3128 Standard Specification for 2-Methoxyethanol
D3130 Standard Specification for n-Propyl Acetate (96 % Grade)
D3131 Standard Specification for Isopropyl Acetate (99 % Grade)
D3134 Standard Practice for Establishing Color and Gloss Tolerances
D3160 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (&agr;–Methylstyrene)
D3168 Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
D3170 Standard Test Method for Chipping Resistance of Coatings
D3193 Standard Specification for Ethylbenzene
D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
D3256 Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
D3257 Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
D3258 Standard Test Method for Porosity of White or Near White Paint Films by Staining
D3260 Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
D3271 Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
D3274 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
D3276 Standard Guide for Painting Inspectors (Metal Substrates)
D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
D3280 Standard Test Methods for Analysis of White Zinc Pigments
D3322 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
D3329 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
D3335 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
D3359 Standard Test Methods for Measuring Adhesion by Tape Test
D3361 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D3363 Standard Test Method for Film Hardness by Pencil Test
D3424 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
D3437 Standard Practice for Sampling and Handling Liquid Cyclic Products
D3438 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
D3450 Standard Test Method for Washability Properties of Interior Architectural Coatings
D3451 Standard Guide for Testing Coating Powders and Powder Coatings
D3456 Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
D3505 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
D3516 Standard Test Methods for Ashing Cellulose
D3539 Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer
D3540 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)
D3545 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
D3546 Standard Test Method for Formic Acid in Glacial Acetic Acid
D3548 Standard Specification for Ethyl Acrylate
D3618 Standard Test Method for Detection of Lead in Paint and Dried Paint Films
D3620 Standard Specification for Glacial Acetic Acid
D3622 Standard Specification for 1-Propanol (n-Propyl Alcohol)
D3623 Standard Test Method for Testing Antifouling Panels in Shallow Submergence
D3624 Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
D3717 Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
D3718 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
D3720 Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
D3721 Standard Specification for Synthetic Red Iron Oxide Pigment
D3722 Standard Specification for Natural Red and Brown Iron Oxide Pigments
D3723 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
D3724 Standard Specification for Synthetic Brown Iron Oxide Pigment
D3728 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)
D3730 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
D3732 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
D3734 Standard Specification for High-Flash Aromatic Naphthas
D3735 Standard Specification for VMP Naphthas
D3760 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
D3792 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
D3793 Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement
D3797 Standard Test Method for Analysis of o-Xylene by Gas Chromatography
D3804 Standard Test Method for Iron in Paint Driers by EDTA Method
D3806 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
D3843 Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
D3852 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
D3872 Standard Test Method for Ferrous Iron in Iron Oxides
D3876 Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography
D3891 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
D3893 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
D3911 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
D3912 Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
D3924 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
D3925 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
D3926 Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
D3928 Standard Test Method for Evaluation of Gloss or Sheen Uniformity
D3934 Standard Test Method for Flash/No Flash Test-Equilibrium Method by a Closed-Cup Apparatus
D3941 Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
D3960 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
D3964 Standard Practice for Selection of Coating Specimens for Appearance Measurements
D3969 Standard Test Method for Zirconium in Paint Driers by EDTA Method
D3970 Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
D3971 Standard Test Method for Dichloromethane-Soluble Matter in Cellulose
D3988 Standard Test Method for Vanadium in Paint Driers by EDTA Method
D3989 Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method
D4017 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
D4039 Standard Test Method for Reflection Haze of High-Gloss Surfaces
D4040 Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
D4061 Standard Test Method for Retroreflectance of Horizontal Coatings
D4062 Standard Test Method for Leveling of Paints by Draw-Down Method
D4077 Standard Specification for Cumene (Isopropylbenzene)
D4082 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants
D4085 Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
D4086 Standard Practice for Visual Evaluation of Metamerism
D4138 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
D4139 Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
D4140 Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents
D4141 Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
D4142 Standard Guide for Testing Epoxy Resins
D4143 Standard Guide for Testing Latex Vehicles
D4144 Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
D4145 Standard Test Method for Coating Flexibility of Prepainted Sheet
D4146 Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
D4147 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
D4206 Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus
D4209 Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes
D4212 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
D4213 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
D4214 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
D4217 Standard Test Method for Gel Time of Thermosetting Coating Powder
D4227 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
D4228 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
D4236 Standard Practice for Labeling Art Materials for Chronic Health Hazards
D4242 Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
D4258 Standard Practice for Surface Cleaning Concrete for Coating
D4259 Standard Practice for Abrading Concrete
D4260 Standard Practice for Liquid and Gelled Acid Etching of Concrete
D4261 Standard Practice for Surface Cleaning Concrete Masonry Units for Coating
D4262 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
D4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
D4285 Standard Test Method for Indicating Oil or Water in Compressed Air
D4286 Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities
D4287 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
D4288 Standard Specification for Calcium Borosilicate Pigments
D4297 Standard Practice for Sampling and Handling Bisphenol A (4,4' -Isopropylidinediphenol)
D4301 Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
D4302 Standard Specification for Artists' Oil, Resin-Oil, and Alkyd Paints
D4303 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
D4359 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
D4360 Standard Specification for Methyl n-Amyl Ketone
D4361 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
D4367 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography
D4370 Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
D4399 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
D4400 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
D4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages
D4416 Standard Specification for Acrylic Acid
D4417 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
D4446 Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments
D4449 Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
D4450 Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment
D4451 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
D4457 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
D4462 Standard Specification for Zinc Hydroxy Phosphite Pigment
D4471 Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration
D4487 Standard Test Methods for Analysis of Calcium Borosilicate
D4492 Standard Test Method for Analysis of Benzene by Gas Chromatography
D4493 Standard Test Method for Solidification Point of Bisphenol A (4,4′-Isopropylidenediphenol)
D4537 Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
D4538 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
D4563 Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
D4584 Standard Test Method for Measuring Apparent pH of Electrocoat Baths
D4585 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
D4590 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
D4610 Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings
D4614 Standard Specification for Ethyl Acetate (All Grades)
D4615 Standard Specification for n-Butyl Acetate (All Grades)
D4618 Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
D4619 Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
D4640 Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
D4707 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
D4708 Standard Practice for Preparation of Uniform Free Films of Organic Coatings
D4709 Standard Specification for Methyl Acrylate
D4710 Standard Specification for Acetaldehyde
D4712 Standard Guide for Testing Industrial Water-Reducible Coatings
D4713 Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
D4734 Standard Specification for Refined Benzene-545
D4735 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
D4747 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
D4752 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
D4764 Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
D4773 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
D4787 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
D4789 Standard Test Method for Solution Color of Bisphenol A (4,4′-Isopropylidenediphenol)
D4790 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
D4794 Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography
D4795 Standard Test Method for Nitrogen Content of Soluble Nitrocellulose—Alternative Method
D4796 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
D4797 Standard Test Methods for Chemical and Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking Containing Lead Chromate and Titanium Dioxide
D4827 Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
D4828 Standard Test Methods for Practical Washability of Organic Coatings
D4834 Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
D4835 Standard Specification for Propylene Glycol Monomethyl Ether Acetate
D4836 Standard Specification for Dipropylene Glycol Monomethyl Ether
D4837 Standard Specification for Propylene Glycol Monomethyl Ether
D4838 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
D4938 Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
D4939 Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
D4940 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
D4941 Standard Practice for Preparing Drawdowns of Artists' Paste Paints
D4942 Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
D4946 Standard Test Method for Blocking Resistance of Architectural Paints
D4948 Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
D4958 Standard Test Method for Comparison of the Brush Drag of Latex Paints
D4960 Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
D5007 Standard Test Method for Wet-to-Dry Hiding Change
D5008 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
D5009 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
D5010 Standard Guide for Testing Printing Inks and Related Materials
D5031 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
D5043 Standard Practice for Field Identification of Coatings
D5060 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
D5062 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
D5063 Standard Guide for Use of Certification of Coating Conformance Form
D5064 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
D5065 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
D5066 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis
D5067 Standard Specification for Artists' Watercolor Paints
D5068 Standard Practice for Preparation of Paint Brushes for Evaluation
D5069 Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings
D5087 Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
D5095 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
D5098 Standard Specification for Artists' Acrylic Dispersion Paints
D5107 Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
D5108 Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water
D5125 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
D5135 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
D5136 Standard Specification for High Purity p-Xylene
D5137 Standard Specification for Hexyl Acetate
D5139 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
D5144 Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
D5145 Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings
D5150 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
D5161 Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)
D5162 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
D5163 Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
D5164 Standard Specification for Propylene Glycol and Dipropylene Glycol
D5166 Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
D5178 Standard Test Method for Mar Resistance of Organic Coatings
D5179 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
D5181 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
D5200 Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
D5201 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
D5211 Standard Specification for Xylenes for p-Xylene Feedstock
D5286 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
D5301 Standard Practice for Physical Characterization of Paint Brushes
D5309 Standard Specification for Cyclohexane 999
D5310 Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography
D5324 Standard Guide for Testing Water-Borne Architectural Coatings
D5325 Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
D5326 Standard Test Method for Color Development in Tinted Latex Paints
D5327 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
D5367 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
D5380 Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
D5381 Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
D5382 Standard Guide to Evaluation of Optical Properties of Powder Coatings
D5383 Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists
D5386 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
D5398 Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User
D5399 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
D5400 Standard Test Methods for Hydroxypropylcellulose
D5401 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
D5402 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
D5403 Standard Test Methods for Volatile Content of Radiation Curable Materials
D5471 Standard Specification for O-Xylene 980
D5478 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
D5479 Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed
D5498 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
D5499 Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems
D5517 Standard Test Method for Determining Extractability of Metals from Art Materials
D5531 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
D5588 Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
D5589 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
D5590 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
D5606 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock
D5618 Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
D5682 Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials
D5702 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
D5703 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry
D5713 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
D5722 Standard Practice for Performing Accelerated Outdoor Weathering of Factory- Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
D5723 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
D5724 Standard Specification for Gouache Paints
D5767 Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
D5768 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
D5794 Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
D5795 Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via “Cobb Ring” Apparatus
D5796 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
D5808 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
D5860 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
D5861 Standard Guide for Significance of Particle Size Measurements of Coating Powders
D5871 Standard Specification for Benzene for Cyclohexane Feedstock
D5894 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
D5895 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
D5896 Standard Test Method for Carbohydrate Distribution of Cellulosic Materials
D5897 Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration-Alternative Method
D5909 Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
D5910 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
D5913 Standard Test Method for Evaluation of Cleanability of Paint Brushes
D5917 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
D5958 Standard Practices for Preparation of Oil-Based Ink Resin Solutions
D5959 Standard Test Method for Bulk Density of Level Paintbrush Filaments
D5965 Standard Test Methods for Specific Gravity of Coating Powders
D5974 Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
D6038 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)
D6069 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
D6073 Standard Test Method for Relative Setting of Heatset Printing Inks
D6090 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
D6093 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
D6131 Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage
D6133 Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
D6137 Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems
D6142 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
D6143 Standard Test Method for Iron Content of Bisphenol A (4,4´ - Isopropylidenediphenol)
D6144 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography
D6165 Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials
D6166 Standard Test Method for Color of Naval Stores and Related Products (Instrumental Determination of Gardner Color)
D6188 Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
D6189 Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
D6191 Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings
D6206 Standard Practice for Sampling of Coating Films
D6229 Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
D6237 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
D6266 Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
D6267 Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
D6279 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
D6280 Standard Specification for Zinc Phosphate Pigments
D6336 Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
D6337 Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics
D6367 Standard Specification for AMS (α-Methylstyrene)
D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
D6387 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
D6419 Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
D6438 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
D6440 Standard Terminology Relating to Hydrocarbon Resins
D6441 Standard Test Methods for Measuring the Hiding Power of Powder Coatings
D6442 Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
D6486 Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
D6487 Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press
D6488 Standard Terminology Relating to Print Problems
D6489 Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
D6490 Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
D6491 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
D6492 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
D6493 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
D6526 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography
D6531 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
D6532 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
D6563 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
D6577 Standard Guide for Testing Industrial Protective Coatings
D6578 Standard Practice for Determination of Graffiti Resistance
D6579 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
D6580 Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
D6583 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
D6604 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
D6605 Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating
D6606 Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer
D6619 Standard Practice for Incorporating Pigments by High Speed Dispersion
D6621 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
D6631 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
D6665 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
D6675 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
D6677 Standard Test Method for Evaluating Adhesion by Knife
D6686 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
D6687 Standard Guide for Testing Printing Ink Vehicles and Components Thereof
D6688 Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique
D6689 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
D6695 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
D6736 Standard Test Method for Burnish Resistance of Latex Paints
D6737 Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
D6762 Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
D6763 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
D6801 Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials
D6809 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
D6846 Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
D6875 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
D6886 Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography
D6887 Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions
D6900 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
D6901 Standard Specification for Artists' Colored Pencils
D6902 Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
D6903 Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
D6905 Standard Test Method for Impact Flexibility of Organic Coatings
D6906 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
D6942 Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
D6943 Standard Practice for Immersion Testing of Industrial Protective Coatings
D6944 Standard Practice for Resistance of Cured Coatings to Thermal Cycling
D6957 Standard Practice for Measuring Curl in Paint Brush Filling Material
D6989 Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions
D6990 Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems
D6991 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
D7011 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
D7054 Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
D7055 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
D7057 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
D7072 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
D7073 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
D7087 Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
D7088 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
D7089 Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
D7090 Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography
D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
D7093 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
D7108 Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
D7124 Standard Specification for Benzene for Use with Zeolite Based Catalysts
D7125 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process
D7127 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
D7163 Standard Test Method for Specular Gloss of Printed Matter
D7167 Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
D7183 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence
D7185 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
D7187 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
D7188 Standard Terminology for Printing Inks, Materials, and Processes
D7189 Standard Test Method for Relative Mileage of News Ink on Newsprint
D7190 Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
D7195 Standard Guide for Protocol for Setting Color Specifications for a Material
D7230 Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates
D7232 Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
D7233 Standard Test Method for Testing Fracture of Level Paintbrush Filaments
D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
D7244 Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
D7245 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
D7266 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
D7270 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings
D7271 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
D7305 Standard Test Method for Reflection Density of Printed Matter
D7306 Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation
D7307 Standard Practice for Sampling of Thermoplastic Traffic Marking Materials
D7308 Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
D7334 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
D7354 Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings
D7355 Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings
D7356 Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
D7357 Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete
D7358 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
D7359 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
D7360 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
D7372 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
D7375 Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration
D7376 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
D7377 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet
D7378 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
D7393 Standard Practice for Indicating Oil in Abrasives
D7394 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
D7395 Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
D7396 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
D7457 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
D7488 Standard Test Method for Open Time of Latex Paints
D7489 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
D7491 Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants
D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
D7514 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
D7536 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
D7538 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
D7539 Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
D7540 Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
D7541 Standard Practice for Estimating Critical Surface Tensions
D7588 Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container
D7602 Standard Practice for Installation of Vulcanized Rubber Linings
D7639 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
D7680 Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
D7681 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
D7682 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
D7704 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
D7733 Standard Specification for Acrylic Dispersion Ground
D7735 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
D7767 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them
D7786 Standard Test Method for Determining Enamel Holdout

E28 Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
E259 Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries
E284 Standard Terminology of Appearance
E308 Standard Practice for Computing the Colors of Objects by Using the CIE System
E312 Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC)
E313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
E430 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
E541 Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
E651/E651M Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
E699 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
E805 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
E808 Standard Practice for Describing Retroreflection
E809 Standard Practice for Measuring Photometric Characteristics of Retroreflectors
E810 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
E811 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
E848 Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates
E991 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
E1164 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
E1301 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
E1323 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
E1331 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
E1336 Standard Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry
E1341 Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry
E1345 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
E1347 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
E1348 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
E1349 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry
E1360 Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
E1455 Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters
E1477 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
E1478 Standard Practice for Visual Color Evaluation of Transparent Sheet Materials
E1499 Standard Guide for Selection, Evaluation, and Training of Observers
E1501 Standard Specification for Nighttime Photometric Performance of Retroreflective Pedestrian Markings for Visibility Enhancement
E1682 Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit
E1696 Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
E1708 Standard Practice for Electronic Interchange of Color and Appearance Data
E1709 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
E1710 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
E1767 Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials
E1808 Standard Guide for Designing and Conducting Visual Experiments
E2022 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
E2030 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
E2066 Standard Guide for Validation of Laboratory Information Management Systems
E2072 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
E2073 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
E2152 Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
E2153 Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
E2159 Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts
E2175 Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
E2176 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-Rain)
E2177 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
E2194 Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials
E2194 Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials
E2214 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
E2222 Standard Practice for Host Computer Communication with Spectrometers for Color Measurements
E2302 Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
E2366 Standard Test Method for Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter
E2367 Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
E2387 Standard Practice for Goniometric Optical Scatter Measurements
E2466 Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology
E2480 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
E2501 Standard Specification for Light Source Products for Inspection of Fluorescent Coatings
E2539 Standard Practice for Multiangle Color Measurement of Interference Pigments
E2539 Standard Practice for Multiangle Color Measurement of Interference Pigments
E2540 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
E2545 Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras
E2630 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
E2670 Standard Test Method for Objective Quantification of Dental Plaque Using Digital Still Cameras
E2729 Standard Practice for Rectification of Spectrophotometric Bandpass Differences
E2832 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)

F439 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F441/F441M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F697 Standard Practice for Care and Use of Athletic Mouth Protectors
F714 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
F747 Standard Terminology Relating to Amusement Rides and Devices
F770 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
F835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
F846 Standard Guide for Testing Performance of Amusement Rides and Devices
F853 Standard Practice for Maintenance Procedures for Amusement Rides and Devices
F880 Standard Specification for Stainless Steel Socket-Set Screws
F893 Standard Guide for Inspection of Amusement Rides and Devices
F1159 Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures
F1193 Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
F1957 Standard Test Method for Composite Foam Hardness-Durometer Hardness
F2007 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
F2137 Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
F2291 Standard Practice for Design of Amusement Rides and Devices
F2374 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
F2375 Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
F2376 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
F2460 Standard Practice for Special Requirements for Bumper Boats
F2461 Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment

G6 Standard Test Method for Abrasion Resistance of Pipeline Coatings
G8 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
G9 Standard Test Method for Water Penetration into Pipeline Coatings
G10 Standard Test Method for Specific Bendability of Pipeline Coatings
G11 Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
G12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
G14 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
G17 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
G18 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
G20 Standard Test Method for Chemical Resistance of Pipeline Coatings
G42 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
G55 Standard Test Method for Evaluating Pipeline Coating Patch Materials
G62 Standard Test Methods for Holiday Detection in Pipeline Coatings
G70 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
G80 Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings
G95 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)


Return to Previous Page