ASTM Standards Source (Online and DVD-ROM):
Metals Collection

Return to Previous Page

TABLE OF CONTENTS
(Standards will be added, revised or withdrawn on an ongoing basis.)

A1 Standard Specification for Carbon Steel Tee Rails
A2 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
A3 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A20/A20M Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A27/A27M Standard Specification for Steel Castings, Carbon, for General Application
A29/A29M Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
A31 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A34/A34M Standard Practice for Sampling and Procurement Testing of Magnetic Materials
A36/A36M Standard Specification for Carbon Structural Steel
A47/A47M Standard Specification for Ferritic Malleable Iron Castings
A48/A48M Standard Specification for Gray Iron Castings
A49 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A65 Standard Specification for Steel Track Spikes
A66 Standard Specification for Steel Screw Spikes
A67 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
A74 Standard Specification for Cast Iron Soil Pipe and Fittings
A82/A82M Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A99 Standard Specification for Ferromanganese
A100 Standard Specification for Ferrosilicon
A101 Standard Specification for Ferrochromium
A102 Standard Specification for Ferrovanadium
A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications
A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A111 Standard Specification for Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line Wire
A116 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
A121 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
A123/A123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A125 Standard Specification for Steel Springs, Helical, Heat-Treated
A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A128/A128M Standard Specification for Steel Castings, Austenitic Manganese
A131/A131M Standard Specification for Structural Steel for Ships
A132 Standard Specification for Ferromolybdenum
A134 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe
A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A143/A143M Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A144 Specification for Ferrotungsten
A146 Standard Specification for Molybdenum Oxide Products
A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes
A153/A153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A159 Standard Specification for Automotive Gray Iron Castings
A167 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A176 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
A178/A178M Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A179/A179M Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A181/A181M Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A183 Standard Specification for Carbon Steel Track Bolts and Nuts
A184/A184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
A185/A185M Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
A192/A192M Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A197/A197M Standard Specification for Cupola Malleable Iron
A203/A203M Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A204/A204M Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A209/A209M Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A210/A210M Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A214/A214M Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A216/A216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A217/A217M Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A220/A220M Standard Specification for Pearlitic Malleable Iron
A225/A225M Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
A227/A227M Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A228/A228M Standard Specification for Steel Wire, Music Spring Quality
A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
A230/A230M Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
A231/A231M Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
A232/A232M Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A239 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel
A247 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A250/A250M Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
A252 Standard Specification for Welded and Seamless Steel Pipe Piles
A254 Standard Specification for Copper-Brazed Steel Tubing
A255 Standard Test Methods for Determining Hardenability of Steel
A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A263 Standard Specification for Stainless Chromium Steel-Clad Plate
A264 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
A265 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A266/A266M Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
A268/A268M Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A269 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A270/A270M Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A275/A275M Standard Practice for Magnetic Particle Examination of Steel Forgings
A276 Standard Specification for Stainless Steel Bars and Shapes
A278/A278M Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A285/A285M Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A288 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A289/A289M Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A290/A290M Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A291/A291M Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A295/A295M Standard Specification for High-Carbon Anti-Friction Bearing Steel
A297/A297M Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A299/A299M Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A302/A302M Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A304 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A307 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A308/A308M Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A309 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A311/A311M Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A313/A313M Standard Specification for Stainless Steel Spring Wire
A314 Standard Specification for Stainless Steel Billets and Bars for Forging
A319 Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
A322 Standard Specification for Steel Bars, Alloy, Standard Grades
A323 Standard Specification for Ferroboron
A324 Standard Specification for Ferrotitanium
A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A327/A327M Standard Test Methods for Impact Testing of Cast Irons
A328/A328M Standard Specification for Steel Sheet Piling
A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A336/A336M Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A338 Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
A340 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
A341/A341M Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
A342/A342M Standard Test Methods for Permeability of Feebly Magnetic Materials
A343/A343M Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A345 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
A348/A348M Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
A350/A350M Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
A352/A352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A353/A353M Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A355 Standard Specification for Steel Bars, Alloys, for Nitriding
A356/A356M Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A358/A358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A363 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A367 Standard Test Methods of Chill Testing of Cast Iron
A368 Standard Specification for Stainless Steel Wire Strand
A369/A369M Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A372/A372M Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A376/A376M Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A377 Standard Index of Specifications for Ductile-Iron Pressure Pipe
A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A381 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A384/A384M Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A385/A385M Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A387/A387M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A388/A388M Standard Practice for Ultrasonic Examination of Steel Forgings
A389/A389M Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A390 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A391/A391M Standard Specification for Grade 80 Alloy Steel Chain
A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A394 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A400 Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A401/A401M Standard Specification for Steel Wire, Chromium-Silicon Alloy
A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A407 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
A409/A409M Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A411 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A413/A413M Standard Specification for Carbon Steel Chain
A414/A414M Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
A416/A416M Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A418/A418M Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A420/A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A421/A421M Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A423/A423M Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A424/A424M Standard Specification for Steel, Sheet, for Porcelain Enameling
A426/A426M Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A427/A427M Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A434 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A435/A435M Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A436 Standard Specification for Austenitic Gray Iron Castings
A437/A437M Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
A439 Standard Specification for Austenitic Ductile Iron Castings
A447/A447M Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A450/A450M Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
A451/A451M Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A453/A453M Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A455/A455M Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A456/A456M Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
A459 Standard Specification for Zinc-Coated Flat Steel Armoring Tape
A460 Standard Specification for Copper-Clad Steel Wire Strand
A463/A463M Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A466/A466M Standard Specification for Weldless Chain
A467/A467M Standard Specification for Machine and Coil Chain
A469/A469M Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
A470/A470M Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A471/A471M Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A472/A472M Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
A473 Standard Specification for Stainless Steel Forgings
A474 Standard Specification for Aluminum-Coated Steel Wire Strand
A475 Standard Specification for Zinc-Coated Steel Wire Strand
A476/A476M Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
A478 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A481 Standard Specification for Chromium Metal
A482/A482M Standard Specification for Ferrochrome-Silicon
A483/A483M Standard Specification for Silicomanganese
A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A485 Standard Specification for High Hardenability Antifriction Bearing Steel
A487/A487M Standard Specification for Steel Castings Suitable for Pressure Service
A488/A488M Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A489 Standard Specification for Carbon Steel Lifting Eyes
A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A492 Standard Specification for Stainless Steel Rope Wire
A493 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy
A495 Standard Specification for Calcium-Silicon Alloys
A496/A496M Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
A497/A497M Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
A498 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
A499 Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A502 Standard Specification for Rivets, Steel, Structural
A503/A503M Standard Specification for Ultrasonic Examination of Forged Crankshafts
A504/A504M Standard Specification for Wrought Carbon Steel Wheels
A505 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A506 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A507 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A508/A508M Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
A511/A511M Standard Specification for Seamless Stainless Steel Mechanical Tubing
A512 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A513 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A515/A515M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A516/A516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A517/A517M Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A518/A518M Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A521/A521M Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
A522/A522M Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A523 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
A524 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A529/A529M Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A531/A531M Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A532/A532M Standard Specification for Abrasion-Resistant Cast Irons
A533/A533M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A534 Standard Specification for Carburizing Steels for Anti-Friction Bearings
A536 Standard Specification for Ductile Iron Castings
A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A540/A540M Standard Specification for Alloy-Steel Bolting for Special Applications
A541/A541M Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A542/A542M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
A543/A543M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A550 Standard Specification for Ferrocolumbium
A551/A551M Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
A553/A553M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
A554 Standard Specification for Welded Stainless Steel Mechanical Tubing
A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A556/A556M Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A560/A560M Standard Specification for Castings, Chromium-Nickel Alloy
A561 Standard Practice for Macroetch Testing of Tool Steel Bars
A562/A562M Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
A563 Standard Specification for Carbon and Alloy Steel Nuts
A563M Standard Specification for Carbon and Alloy Steel Nuts [Metric]
A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A565/A565M Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A571/A571M Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A572/A572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A573/A573M Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A574 Standard Specification for Alloy Steel Socket-Head Cap Screws
A574M Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)
A575 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A577/A577M Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
A579/A579M Standard Specification for Superstrength Alloy Steel Forgings
A580/A580M Standard Specification for Stainless Steel Wire
A581/A581M Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A582/A582M Standard Specification for Free-Machining Stainless Steel Bars
A586 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
A587 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A588/A588M Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A589/A589M Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A592/A592M Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
A595/A595M Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A596/A596M Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A597 Standard Specification for Cast Tool Steel
A598/A598M Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
A599/A599M Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A600 Standard Specification for Tool Steel High Speed
A601/A601M Standard Specification for Electrolytic Manganese Metal
A602 Standard Specification for Automotive Malleable Iron Castings
A603 Standard Specification for Zinc-Coated Steel Structural Wire Rope
A604/A604M Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A606/A606M Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A608/A608M Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A609/A609M Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A610 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A612/A612M Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A623 Standard Specification for Tin Mill Products, General Requirements
A623M Standard Specification for Tin Mill Products, General Requirements [Metric]
A624/A624M Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A625/A625M Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
A626/A626M Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A630 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A632 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A636 Standard Specification for Nickel Oxide Sinter
A638/A638M Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A640 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A641/A641M Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A644 Standard Terminology Relating to Iron Castings
A645/A645M Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A646/A646M Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A648 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
A649/A649M Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A650/A650M Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A657/A657M Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A659/A659M Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A660/A660M Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A662/A662M Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A663/A663M Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A664 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A667/A667M Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A671/A671M Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A672/A672M Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A673/A673M Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A674 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A677 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A679/A679M Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A681 Standard Specification for Tool Steels Alloy
A683 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A686 Standard Specification for Tool Steel, Carbon
A688/A688M Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
A689 Standard Specification for Carbon and Alloy Steel Bars for Springs
A690/A690M Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
A691/A691M Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A694/A694M Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A696 Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A697/A697M Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
A698/A698M Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A700 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A701/A701M Standard Specification for Ferromanganese-Silicon
A702 Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A704/A704M Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings
A706/A706M Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A707/A707M Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A709/A709M Standard Specification for Structural Steel for Bridges
A710/A710M Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A711/A711M Standard Specification for Steel Forging Stock
A712 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
A713 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
A714 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
A716 Standard Specification for Ductile Iron Culvert Pipe
A717/A717M Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
A719/A719M Standard Test Method for Lamination Factor of Magnetic Materials
A720/A720M Standard Test Method for Ductility of Nonoriented Electrical Steel
A721/A721M Standard Test Method for Ductility of Oriented Electrical Steel
A722/A722M Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
A723/A723M Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A724/A724M Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
A726 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
A727/A727M Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A729/A729M Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A732/A732M Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A733 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A734/A734M Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
A735/A735M Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
A736/A736M Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
A737/A737M Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A738/A738M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A739 Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A740 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A741 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A745/A745M Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
A746 Standard Specification for Ductile Iron Gravity Sewer Pipe
A747/A747M Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A748/A748M Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A749/A749M Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A752 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
A752M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
A753 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A754/A754M Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A756 Standard Specification for Stainless Anti-Friction Bearing Steel
A757/A757M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A758/A758M Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A759 Standard Specification for Carbon Steel Crane Rails
A760/A760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A762/A762M Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A763 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A765/A765M Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A767/A767M Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A768/A768M Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A769/A769M Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
A770/A770M Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A772/A772M Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
A773/A773M Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
A774/A774M Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A775/A775M Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A779/A779M Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
A780/A780M Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A786/A786M Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A787/A787M Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A788/A788M Standard Specification for Steel Forgings, General Requirements
A789/A789M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A792/A792M Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A793 Standard Specification for Rolled Floor Plate, Stainless Steel
A794/A794M Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
A795/A795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A796/A796M Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A799/A799M Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A800/A800M Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
A801 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
A802/A802M Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A803/A803M Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
A804/A804M Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
A805/A805M Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A807/A807M Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A810 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A811 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
A813/A813M Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A814/A814M Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A818 Standard Specification for Coppered Carbon Steel Wire
A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A821/A821M Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
A822/A822M Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A823 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
A824 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A827/A827M Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
A829/A829M Standard Specification for Alloy Structural Steel Plates
A830/A830M Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A832/A832M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A833 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A834 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A835/A835M Standard Specification for Sizes of Ferroalloys and Alloy Additives
A836/A836M Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A837/A837M Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A838 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
A839 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
A841/A841M Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
A842 Standard Specification for Compacted Graphite Iron Castings
A844/A844M Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
A847/A847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A848 Standard Specification for Low-Carbon Magnetic Iron
A849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A853 Standard Specification for Steel Wire, Carbon, for General Use
A854/A854M Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A855/A855M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A856/A856M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A857/A857M Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A858/A858M Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
A859/A859M Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A860/A860M Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
A861 Standard Specification for High-Silicon Iron Pipe and Fittings
A862/A862M Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
A865/A865M Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A866 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A867 Standard Specification for Iron-Silicon Relay Steels
A871/A871M Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A872/A872M Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A874/A874M Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A875/A875M Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
A876 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A877/A877M Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
A878/A878M Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A879/A879M Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A881/A881M Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties
A882/A882M Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
A884/A884M Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A886/A886M Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A887 Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A889/A889M Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
A890/A890M Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A891/A891M Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A892 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A893/A893M Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
A894/A894M Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
A895 Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A896/A896M Standard Practice for Conducting Case Studies on Galvanized Structures
A897/A897M Standard Specification for Austempered Ductile Iron Castings
A898/A898M Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A899 Standard Specification for Steel Wire, Epoxy-Coated
A900/A900M Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
A901 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
A902 Standard Terminology Relating to Metallic Coated Steel Products
A903/A903M Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A904 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
A905 Standard Specification for Steel Wire, Pressure Vessel Winding
A906/A906M Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A908 Standard Specification for Stainless Steel Needle Tubing
A909/A909M Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
A910/A910M Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
A911/A911M Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
A912/A912M Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
A913/A913M Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process
A914/A914M Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A915/A915M Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A917 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A918 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A920/A920M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A921/A921M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
A922 Standard Specification for Silicon Metal
A923 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A925 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A926 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A927/A927M Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
A928/A928M Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A929/A929M Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A930 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A931 Standard Test Method for Tension Testing of Wire Ropes and Strand
A932/A932M Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
A933/A933M Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement
A934/A934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A937/A937M Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
A938 Standard Test Method for Torsion Testing of Wire
A939 Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
A940/A940M Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
A941 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A942 Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
A943/A943M Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A944 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A945/A945M Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A946 Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
A947M Standard Specification for Textured Stainless Steel Sheet [Metric]
A949/A949M Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A950/A950M Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A951/A951M Standard Specification for Steel Wire for Masonry Joint Reinforcement
A952/A952M Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
A956 Standard Test Method for Leeb Hardness Testing of Steel Products
A957/A957M Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A958/A958M Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A960/A960M Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A961/A961M Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
A964/A964M Standard Specification for Corrugated Steel Box Culverts
A965/A965M Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A966/A966M Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A968/A968M Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement
A971/A971M Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
A972/A972M Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A973/A973M Standard Specification for Grade 100 Alloy Steel Chain
A974 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A975 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A976 Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
A977/A977M Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
A978/A978M Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A979/A979M Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A980/A980M Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A981/A981M Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
A982/A982M Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A983/A983M Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A984/A984M Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A986/A986M Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A987/A987M Standard Practice for Measuring Shape Characteristics of Tin Mill Products
A988/A988M Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A989/A989M Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A990 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A991/A991M Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A992/A992M Standard Specification for Structural Steel Shapes
A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A995/A995M Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A997 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
A998/A998M Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
A1000/A1000M Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A1001 Standard Specification for High Strength Steel Castings in Heavy Sections
A1002 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
A1003/A1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1004/A1004M Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
A1005/A1005M Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
A1006/A1006M Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
A1007 Standard Specification for Carbon Steel Wire for Wire Rope
A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
A1009 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications
A1010/A1010M Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1012 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
A1013 Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
A1014/A1014M Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
A1015 Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
A1017/A1017M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1019/A1019M Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains
A1020/A1020M Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
A1021/A1021M Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
A1022/A1022M Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
A1023/A1023M Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
A1024/A1024M Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
A1025/A1025M Standard Specification for Ferroalloys, General Requirements
A1028 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
A1030/A1030M Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
A1031/A1031M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
A1032 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
A1033 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
A1034/A1034M Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
A1035/A1035M Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
A1036 Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
A1037/A1037M Standard Specification for Steel Line Pipe, Black, Furnace-butt-Welded
A1038 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
A1039/A1039M Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
A1040 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1041/A1041M Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten
A1042/A1042M Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains
A1043/A1043M Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
A1044/A1044M Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
A1045 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
A1046/A1046M Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
A1047/A1047M Standard Test Method for Pneumatic Leak Testing of Tubing
A1048/A1048M Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
A1049/A1049M Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
A1053/A1053M Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
A1054 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets
A1055/A1055M Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
A1056 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
A1057/A1057M Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1058 Standard Test Methods for Mechanical Testing of Steel Products—Metric
A1059/A1059M Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
A1060/A1060M Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1061/A1061M Standard Test Methods for Testing Multi-Wire Steel Strand
A1062 Standard Specification for Steel Castings Sampling
A1063/A1063M Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1064/A1064M Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1065/A1065M Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
A1066/A1066M Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
A1067 Standard Specification for Test Coupons for Steel Castings
A1068 Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
A1069/A1069M Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
A1071/A1071M Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
A1072/A1072M Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
A1073/A1073M Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet
A1074 Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
A1075 Standard Specification for Flanged Steel U-Channel Posts
A1077/A1077M Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
A1080 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
B1 Standard Specification for Hard-Drawn Copper Wire
B2 Standard Specification for Medium-Hard-Drawn Copper Wire
B3 Standard Specification for Soft or Annealed Copper Wire
B5 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
B6 Standard Specification for Zinc
B8 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
B9 Standard Specification for Bronze Trolley Wire
B16/B16M Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
B21/B21M Standard Specification for Naval Brass Rod, Bar, and Shapes
B22 Standard Specification for Bronze Castings for Bridges and Turntables
B23 Standard Specification for White Metal Bearing Alloys (Known Commercially as Babbitt Metal)
B26/B26M Standard Specification for Aluminum-Alloy Sand Castings
B29 Standard Specification for Refined Lead
B30 Standard Specification for Copper Alloys in Ingot Form
B32 Standard Specification for Solder Metal
B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B37 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
B39 Standard Specification for Nickel
B42 Standard Specification for Seamless Copper Pipe, Standard Sizes
B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
B47 Standard Specification for Copper Trolley Wire
B48 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
B49 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
B61 Standard Specification for Steam or Valve Bronze Castings
B62 Standard Specification for Composition Bronze or Ounce Metal Castings
B63 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
B66/B66M Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
B67 Standard Specification for Car and Tender Journal Bearings, Lined
B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed
B69 Standard Specification for Rolled Zinc
B70 Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
B75/B75M Standard Specification for Seamless Copper Tube
B76 Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
B77 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
B78 Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
B80 Standard Specification for Magnesium-Alloy Sand Castings
B84 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
B85/B85M Standard Specification for Aluminum-Alloy Die Castings
B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
B88 Standard Specification for Seamless Copper Water Tube
B88M Standard Specification for Seamless Copper Water Tube (Metric)
B90/B90M Standard Specification for Magnesium-Alloy Sheet and Plate
B91 Standard Specification for Magnesium-Alloy Forgings
B92/B92M Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
B93/B93M Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
B94 Standard Specification for Magnesium-Alloy Die Castings
B96/B96M Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
B98/B98M Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
B99/B99M Standard Specification for Copper-Silicon Alloy Wire for General Applications
B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
B103/B103M Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
B105 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
B106 Standard Test Methods for Flexivity of Thermostat Metals
B107/B107M Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings
B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
B114 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
B115 Standard Specification for Electrolytic Copper Cathode
B116 Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
B117 Standard Practice for Operating Salt Spray (Fog) Apparatus
B121/B121M Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
B129 Standard Specification for Cartridge Brass Cartridge Case Cups
B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets
B131 Standard Specification for Copper Alloy Bullet Jacket Cups
B134/B134M Standard Specification for Brass Wire
B135 Standard Specification for Seamless Brass Tube
B135M Standard Specification for Seamless Brass Tube [Metric]
B136 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
B137 Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
B138/B138M Standard Specification for Manganese Bronze Rod, Bar, and Shapes
B139/B139M Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
B140/B140M Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
B148 Standard Specification for Aluminum-Bronze Sand Castings
B150/B150M Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
B151/B151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B153 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
B159/B159M Standard Specification for Phosphor Bronze Wire
B160 Standard Specification for Nickel Rod and Bar
B161 Standard Specification for Nickel Seamless Pipe and Tube
B162 Standard Specification for Nickel Plate, Sheet, and Strip
B163 Standard Specification for Seamless Nickel and Nickel Alloy (UNS N06845) Condenser and Heat-Exchanger Tubes
B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
B165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
B166 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,
B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an
B168 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,
B169/B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
B170 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
B173 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
B174 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
B176 Standard Specification for Copper-Alloy Die Castings
B177/B177M Standard Guide for Engineering Chromium Electroplating
B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
B183 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
B187/B187M Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
B188 Standard Specification for Seamless Copper Bus Pipe and Tube
B189 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
B193 Standard Test Method for Resistivity of Electrical Conductor Materials
B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B196/B196M Standard Specification for Copper-Beryllium Alloy Rod and Bar
B197/B197M Standard Specification for Copper-Beryllium Alloy Wire
B199 Standard Specification for Magnesium-Alloy Permanent Mold Castings
B200 Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
B201 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
B206/B206M Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
B208 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)
B212 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
B213 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
B214 Standard Test Method for Sieve Analysis of Metal Powders
B215 Standard Practices for Sampling Metal Powders
B216 Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B223 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
B224 Standard Classification of Coppers
B226 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
B227 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
B228 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
B229 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
B230/B230M Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
B231/B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
B232/B232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
B233 Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
B234 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
B234M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
B236M Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
B236 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
B237 Standard Specification for Refined Antimony
B240 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B242 Standard Guide for Preparation of High-Carbon Steel for Electroplating
B243 Standard Terminology of Powder Metallurgy
B244 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
B246 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire
B251 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
B251M Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
B252 Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
B253 Standard Guide for Preparation of Aluminum Alloys for Electroplating
B254 Standard Practice for Preparation of and Electroplating on Stainless Steel
B258 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
B263 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
B267 Standard Specification for Wire for Use In Wire-Wound Resistors
B271 Standard Specification for Copper-Base Alloy Centrifugal Castings
B272 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
B275 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
B276 Standard Test Method for Apparent Porosity in Cemented Carbides
B277 Standard Test Method for Hardness of Electrical Contact Materials
B279 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B281 Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
B283/B283M Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
B286 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
B294 Standard Test Method for Hardness Testing of Cemented Carbides
B296 Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
B298 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
B299 Standard Specification for Titanium Sponge
B301/B301M Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
B302 Standard Specification for Threadless Copper Pipe, Standard Sizes
B306 Standard Specification for Copper Drainage Tube (DWV)
B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
B311 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
B312 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
B313/B313M Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
B315 Standard Specification for Seamless Copper Alloy Pipe and Tube
B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
B317/B317M Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
B319 Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
B320 Standard Practice for Preparation of Iron Castings for Electroplating
B322 Standard Guide for Cleaning Metals Prior to Electroplating
B324 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
B327 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
B329 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
B330 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
B331 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
B333 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
B335 Standard Specification for Nickel-Molybdenum Alloy Rod
B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
B339 Standard Specification for Pig Tin
B343 Standard Practice for Preparation of Nickel for Electroplating with Nickel
B344 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
B345/B345M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets
B349/B349M Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
B350/B350M Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
B351/B351M Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
B352/B352M Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
B353 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
B354 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
B355 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
B359/B359M Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
B360 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
B361 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
B362 Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
B363 Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
B364 Standard Specification for Tantalum and Tantalum Alloy Ingots
B365 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
B366 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
B367 Standard Specification for Titanium and Titanium Alloy Castings
B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
B369 Standard Specification for Copper-Nickel Alloy Castings
B370 Standard Specification for Copper Sheet and Strip for Building Construction
B371/B371M Standard Specification for Copper-Zinc-Silicon Alloy Rod
B372 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
B373 Standard Specification for Aluminum Foil for Capacitors
B374 Standard Terminology Relating to Electroplating
B379 Standard Specification for Phosphorized Coppers—Refinery Shapes
B380 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
B381 Standard Specification for Titanium and Titanium Alloy Forgings
B386 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
B387 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
B388 Standard Specification for Thermostat Metal Sheet and Strip
B389 Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
B391 Standard Specification for Niobium and Niobium Alloy Ingots
B392 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
B393 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
B394 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
B395/B395M Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
B398/B398M Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
B399/B399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
B400 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
B401 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
B403 Standard Specification for Magnesium-Alloy Investment Castings
B406 Standard Test Method for Transverse Rupture Strength of Cemented Carbides
B407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
B408 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B409 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
B411/B411M Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
B413 Standard Specification for Refined Silver
B415 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
B416 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
B417 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
B422 Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
B423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube
B424 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip
B425 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar
B427 Standard Specification for Gear Bronze Alloy Castings
B428 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
B429/B429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B432 Standard Specification for Copper and Copper Alloy Clad Steel Plate
B434 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
B435 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
B438 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B439 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B440 Standard Specification for Cadmium
B441 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
B444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
B446 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
B447 Standard Specification for Welded Copper Tube
B449 Standard Specification for Chromates on Aluminum
B452 Standard Specification for Copper-Clad Steel Wire for Electronic Application
B453/B453M Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
B457 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
B462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,
B463 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip
B464 Standard Specification for Welded UNS N08020 Alloy Pipe
B465 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B466/B466M Standard Specification for Seamless Copper-Nickel Pipe and Tube
B467 Standard Specification for Welded Copper-Nickel Pipe
B468 Standard Specification for Welded UNS N08020 Alloy Tubes
B470 Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
B472 Standard Specification for Nickel Alloy Billets and Bars for Reforging
B473 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
B475 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
B476 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
B477 Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
B478 Standard Test Method for Cross Curvature of Thermostat Metals
B479 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
B480 Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
B481 Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
B482 Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
B487 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
B488 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
B489 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
B490 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
B491/B491M Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
B493/B493M Standard Specification for Zirconium and Zirconium Alloy Forgings
B494/B494M Standard Specification for Primary Zirconium
B495 Standard Specification for Zirconium and Zirconium Alloy Ingots
B496 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
B497 Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
B498/B498M Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
B500/B500M Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
B501 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
B502 Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors
B504 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
B505/B505M Standard Specification for Copper Alloy Continuous Castings
B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
B507 Standard Practice for Design of Articles to Be Electroplated on Racks
B508 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
B511 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
B512 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
B514 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
B515 Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
B516 Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes
B517 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
B520 Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
B521 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
B522 Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
B523/B523M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
B524/B524M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
B527 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
B528 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
B530 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
B532 Standard Specification for Appearance of Electroplated Plastic Surfaces
B533 Standard Test Method for Peel Strength of Metal Electroplated Plastics
B534 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B535 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
B536 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
B537 Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
B540 Standard Specification for Palladium Electrical Contact Alloy
B541 Standard Specification for Gold Electrical Contact Alloy
B542 Standard Terminology Relating to Electrical Contacts and Their Use
B543/B543M Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
B545 Standard Specification for Electrodeposited Coatings of Tin
B546 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
B547/B547M Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
B548 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
B549 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors
B550/B550M Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
B551/B551M Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
B552 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
B555 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
B556 Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B557M Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
B558 Standard Practice for Preparation of Nickel Alloys for Electroplating
B559 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
B560 Standard Specification for Modern Pewter Alloys
B561 Standard Specification for Refined Platinum
B562 Standard Specification for Refined Gold
B563 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
B564 Standard Specification for Nickel Alloy Forgings
B565 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
B566 Standard Specification for Copper-Clad Aluminum Wire
B567 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
B569 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
B570 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
B572 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
B573 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
B574 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten
B575 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium
B576 Standard Guide for Arc Erosion Testing of Electrical Contact Materials
B577 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
B578 Standard Test Method for Microhardness of Electroplated Coatings
B579 Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
B580 Standard Specification for Anodic Oxide Coatings on Aluminum
B581 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
B582 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
B584 Standard Specification for Copper Alloy Sand Castings for General Applications
B587 Standard Specification for Welded Brass Tube
B588 Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
B589 Standard Specification for Refined Palladium
B591 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
B592 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B593 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
B594 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
B595 Standard Specification for Sintered Aluminum Structural Parts
B596 Standard Specification for Gold-Copper Alloy Electrical Contact Material
B598 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
B599 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
B601 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
B602 Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
B603 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
B604 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
B605 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
B606 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
B607 Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
B608 Standard Specification for Welded Copper-Alloy Pipe
B609/B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
B610 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
B611 Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
B613 Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
B614 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
B615 Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
B616 Standard Specification for Refined Rhodium
B617 Standard Specification for Coin Silver Electrical Contact Alloy
B618/B618M Standard Specification for Aluminum-Alloy Investment Castings
B619 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
B620 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
B621 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
B624 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
B625 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
B626 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
B628 Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
B629 Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
B630 Standard Practice for Preparation of Chromium for Electroplating with Chromium
B631 Standard Specification for Silver-Tungsten Electrical Contact Materials
B632/B632M Standard Specification for Aluminum-Alloy Rolled Tread Plate
B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B634 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
B635 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
B636 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
B637 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
B639 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
B640 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
B643 Standard Specification for Copper-Beryllium Alloy Seamless Tube
B644 Standard Specification for Copper Alloy Addition Agents
B645 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
B646 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
B647 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
B648 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
B650 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
B651 Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
B652/B652M Standard Specification for Niobium-Hafnium Alloy Ingots
B653/B653M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
B654/B654M Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
B655/B655M Standard Specification for Niobium-Hafnium Alloy Bar and Wire
B657 Guide for Metallographic Identification of Microstructure in Cemented Carbides
B658/B658M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
B659 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
B661 Standard Practice for Heat Treatment of Magnesium Alloys
B662 Standard Specification for Silver-Molybdenum Electrical Contact Material
B663 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
B664 Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material
B665 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
B666/B666M Standard Practice for Identification Marking of Aluminum and Magnesium Products
B667 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
B668 Standard Specification for UNS N08028 Seamless Pipe and Tube
B670 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
B671 Standard Specification for Refined Iridium
B672 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
B673 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
B674 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
B675 Standard Specification for UNS N08367 Welded Pipe
B676 Standard Specification for UNS N08367 Welded Tube
B677 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
B678 Standard Test Method for Solderability of Metallic-Coated Products
B679 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
B680 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
B682 Standard Specification for Standard Metric Sizes of Electrical Conductors
B683 Standard Specification for Pure Palladium Electrical Contact Material
B684 Standard Specification for Platinum-Iridium Electrical Contact Materials
B685 Standard Specification for Palladium-Copper Electrical Contact Material
B686/B686M Standard Specification for Aluminum Alloy Castings, High-Strength
B687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
B688 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
B689 Standard Specification for Electroplated Engineering Nickel Coatings
B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
B691 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
B692 Standard Specification for 75 % Silver-25 % % Graphite Sliding Contact Material
B693 Standard Specification for Silver-Nickel Electrical Contact Materials
B694 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
B695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B696 Standard Specification for Coatings of Cadmium Mechanically Deposited
B697 Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
B698 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
B699 Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
B700 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
B701/B701M Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
B702 Standard Specification for Copper-Tungsten Electrical Contact Material
B703 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
B704 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
B705 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
B706 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
B708 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
B709 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
B710 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
B711 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
B712 Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
B717 Standard Specification for Refined Ruthenium
B718 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
B719 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
B722 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
B723 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
B724 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
B725 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
B726 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
B727 Standard Practice for Preparation of Plastics Materials for Electroplating
B729 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
B730 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
B731 Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material
B733 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
B734 Standard Specification for Electrodeposited Copper for Engineering Uses
B735 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
B736 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
B737 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
B738 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
B739 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
B740 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
B742 Standard Specification for Fine Silver Electrical Contact Fabricated Material
B743 Standard Specification for Seamless Copper Tube in Coils
B744/B744M Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
B745/B745M Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
B746/B746M Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
B747 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
B748 Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
B749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
B750 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
B751 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
B753 Standard Specification for Thermostat Component Alloys
B754 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
B755 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
B756 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
B757 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
B758 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
B759 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
B760 Standard Specification for Tungsten Plate, Sheet, and Foil
B761 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
B762 Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
B763 Standard Specification for Copper Alloy Sand Castings for Valve Applications
B764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
B765 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
B766 Standard Specification for Electrodeposited Coatings of Cadmium
B767 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
B768 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
B769 Standard Test Method for Shear Testing of Aluminum Alloys
B770 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
B771 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
B772 Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
B773 Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
B774 Standard Specification for Low Melting Point Alloys
B775 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
B776 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
B777 Standard Specification for Tungsten Base, High-Density Metal
B778 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
B779 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
B780 Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
B781 Standard Guide for Silver-Cadmium Oxide Contact Material
B783 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
B784 Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
B786 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
B787/B787M Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
B788/B788M Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
B789/B789M Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
B790/B790M Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
B792 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
B793 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
B794 Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
B795 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
B796 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications
B797 Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
B798 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
B799 Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
B800 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers
B801 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
B802/B802M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B803 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
B804 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
B805 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
B806 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
B807/B807M Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
B808 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
B809 Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (Flowers-of-Sulfur)
B810 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
B811 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
B812 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
B813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
B814 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
B815 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
B816 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
B817 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
B818 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems
B820 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
B821 Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
B822 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
B823 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
B824 Standard Specification for General Requirements for Copper Alloy Castings
B825 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
B826 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
B827 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
B828 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
B830 Standard Specification for Uniform Test Methods and Frequency
B831 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
B832 Standard Guide for Electroforming with Nickel and Copper
B833 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
B834 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
B835 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
B836 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
B837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems
B839 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod—Inclined Wedge Method
B840 Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
B841 Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
B842 Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
B843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
B844 Standard Guide for Silver-Tin Oxide Contact Material
B845 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
B846 Standard Terminology for Copper and Copper Alloys
B848 Specification for Powder Forged (P/F) Ferrous Materials
B849 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
B850 Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
B851 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
B852 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
B853 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
B854 Standard Guide for Measuring Electrical Contact Intermittences
B855 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
B856 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
B857 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
B858 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
B859 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
B860 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe
B863 Standard Specification for Titanium and Titanium Alloy Wire
B864/B864M Standard Specification for Corrugated Aluminum Box Culverts
B865 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
B866 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
B867 Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
B868 Standard Practice for Contact Performance Classification of Electrical Connection Systems
B869 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
B870 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
B871 Standard Test Method for Tear Testing of Aluminum Alloy Products
B872 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
B873 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
B874 Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
B875 Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
B877 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
B878 Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
B879 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
B880 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
B881 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
B882 Specification for Pre-Patinated Copper for Architectural Applications
B883 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
B884 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
B885 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
B886 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
B887 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
B888 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
B890 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
B891 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
B892 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
B893 Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
B894 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
B895 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
B896 Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
B897 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo Block and Half Block Ingot
B898 Standard Specification for Reactive and Refractory Metal Clad Plate
B899 Standard Terminology Relating to Non-ferrous Metals and Alloys
B900 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
B902 Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
B903 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
B904 Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
B905 Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
B906 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
B907 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
B908 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
B909 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
B910/B910M Standard Specification for Annealed Copper-Clad Steel Wire
B911/B911M Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
B912 Standard Specification for Passivation of Stainless Steels Using Electropolishing
B913 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
B914 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
B915 Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
B916 Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
B917/B917M Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
B918/B918M Standard Practice for Heat Treatment of Wrought Aluminum Alloys
B919 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
B920 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
B921 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
B922 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
B923 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
B924 Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
B925 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
B926 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
B927/B927M Standard Specification for Brass Rod, Bar, and Shapes
B928/B928M Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
B929 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
B930 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
B931 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
B932 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
B933 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
B934 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
B935 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
B936 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
B937 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
B939 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials
B940 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
B941 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
B942 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
B943 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
B944 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
B945 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
B946 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
B947 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
B949 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
B950 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
B951 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
B952/B952M Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
B953 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
B954 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
B955/B955M Standard Specification for Aluminum-Alloy Centrifugal Castings
B956 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
B957 Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
B958 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
B960 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
B961 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
B962 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
B963 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
B964 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
B965 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
B966 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas
B967/B967M Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
B968/B968M Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
B969/B969M Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes
B970 Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts
B971 Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
B972 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
B973 Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
B974/B974M Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
B976 Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)
B977 Standard Specification for Titanium and Titanium Ingots
B981/B981M Standard Specification for Low Leaded Brass Rod, Bar and Shapes
B983 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
C282 Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)
C283 Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
C285 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
C286 Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
C346 Standard Test Method for 45-deg Specular Gloss of Ceramic Materials
C374 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
C375 Standard Classification of Water Used in Milling of Porcelain Enamel
C385 Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
C448 Standard Test Methods for Abrasion Resistance of Porcelain Enamels
C536 Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
C537 Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
C538 Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels
C539 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C614 Standard Test Method for Alkali Resistance of Porcelain Enamels
C632 Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
C633 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
C660 Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
C664 Standard Test Methods for Thickness of Diffusion Coating
C694 Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
C703 Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
C715 Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
C743 Standard Test Method for Continuity of Porcelain Enamel Coatings
C756 Standard Test Method for Cleanability of Surface Finishes
C774 Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
C810 Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
C839 Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
C872 Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
C876 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
C1277 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
C1460 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground
C1461 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
C1540 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1541 Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
C1563 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
D1731 Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
D1732 Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
E3 Standard Guide for Preparation of Metallographic Specimens
E4 Standard Practices for Force Verification of Testing Machines
E6 Standard Terminology Relating to Methods of Mechanical Testing
E7 Standard Terminology Relating to Metallography
E8/E8M Standard Test Methods for Tension Testing of Metallic Materials
E9 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
E10 Standard Test Method for Brinell Hardness of Metallic Materials
E18 Standard Test Methods for Rockwell Hardness of Metallic Materials
E21 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
E32 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
E37 Standard Test Methods for Chemical Analysis of Pig Lead
E45 Standard Test Methods for Determining the Inclusion Content of Steel
E50 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
E55 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
E74 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
E81 Standard Test Method for Preparing Quantitative Pole Figures
E82 Standard Test Method for Determining the Orientation of a Metal Crystal
E83 Standard Practice for Verification and Classification of Extensometer Systems
E88 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
E94 Standard Guide for Radiographic Examination
E103 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
E110 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
E111 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
E112 Standard Test Methods for Determining Average Grain Size
E114 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
E125 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
E127 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
E130 Standard Practice for Designation of Shapes and Sizes of Graphite Electrodes
E131 Standard Terminology Relating to Molecular Spectroscopy
E132 Standard Test Method for Poisson's Ratio at Room Temperature
E135 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
E139 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
E143 Standard Test Method for Shear Modulus at Room Temperature
E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
E159 Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
E164 Standard Practice for Contact Ultrasonic Testing of Weldments
E165 Standard Practice for Liquid Penetrant Examination for General Industry
E168 Standard Practices for General Techniques of Infrared Quantitative Analysis
E169 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
E186 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings
E190 Standard Test Method for Guided Bend Test for Ductility of Welds
E192 Standard Reference Radiographs of Investment Steel Castings of Aerospace Applications
E194 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
E204 Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index
E208 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
E209 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
E213 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
E215 Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube
E238 Standard Test Method for Pin-Type Bearing Test of Metallic Materials
E242 Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed
E243 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes
E246 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
E247 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
E248 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry
E250 Standard Practice for Use of CODEN
E251 Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
E252 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
E255 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E260 Standard Practice for Packed Column Gas Chromatography
E272 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
E273 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
E275 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
E276 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
E278 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
E279 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test
E280 Standard Reference Radiographs for Heavy-Walled (4½ to 12-in. (114 to 305-mm)) Steel Castings
E290 Standard Test Methods for Bend Testing of Material for Ductility
E292 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
E305 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
E309 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
E310 Standard Reference Radiographs for Tin Bronze Castings
E314 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques
E316 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
E317 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
E322 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
E328 Standard Test Methods for Stress Relaxation Tests for Materials and Structures
E334 Standard Practice for General Techniques of Infrared Microanalysis
E340 Standard Test Method for Macroetching Metals and Alloys
E342 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
E345 Standard Test Methods of Tension Testing of Metallic Foil
E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E351 Standard Test Methods for Chemical Analysis of Cast Iron-All Types
E352 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E353 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
E354 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
E355 Standard Practice for Gas Chromatography Terms and Relationships
E363 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
E367 Standard Test Methods for Chemical Analysis of Ferroniobium
E372 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon
E376 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods
E381 Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E382 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
E384 Standard Test Method for Knoop and Vickers Hardness of Materials
E386 Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy
E387 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
E388 Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ,
E389 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
E390 Standard Reference Radiographs for Steel Fusion Welds
E396 Standard Test Methods for Chemical Analysis of Cadmium
E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness Ic of Metallic Materials
E406 Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis
E407 Standard Practice for Microetching Metals and Alloys
E415 Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
E426 Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys
E427 Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode)
E428 Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing
E431 Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
E432 Standard Guide for Selection of a Leak Testing Method
E433 Standard Reference Photographs for Liquid Penetrant Inspection
E436 Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
E439 Standard Test Methods for Chemical Analysis of Beryllium
E446 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
E448 Standard Practice for Scleroscope Hardness Testing of Metallic Materials
E463 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry
E465 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
E466 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
E467 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
E468 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
E478 Standard Test Methods for Chemical Analysis of Copper Alloys
E479 Standard Guide for Preparation of a Leak Testing Specification
E493/E493M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
E494 Standard Practice for Measuring Ultrasonic Velocity in Materials
E498/E498M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
E499/E499M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
E505 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
E507 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
E508 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
E515 Standard Practice for Leaks Using Bubble Emission Techniques
E516 Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal
E520 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
E527 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E536 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
E539 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
E543 Standard Specification for Agencies Performing Nondestructive Testing
E545 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
E561 Standard Test Method for K-R Curve Determination
E562 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
E566 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
E569 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
E570 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
E571 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
E572 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
E573 Standard Practices for Internal Reflection Spectroscopy
E578 Standard Test Method for Linearity of Fluorescence Measuring Systems
E579 Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
E581 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
E587 Standard Practice for Ultrasonic Angle-Beam Contact Testing
E588 Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
E592 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60
E594 Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
E604 Standard Test Method for Dynamic Tear Testing of Metallic Materials
E606 Standard Practice for Strain-Controlled Fatigue Testing
E618 Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine
E633 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
E634 Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry
E643 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
E646 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials
E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates
E650 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
E664/E664M Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
E682 Standard Practice for Liquid Chromatography Terms and Relationships
E684 Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces
E685 Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
E689 Standard Reference Radiographs for Ductile Iron Castings
E690 Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes
E697 Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
E703 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals
E709 Standard Guide for Magnetic Particle Testing
E716 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis
E738 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry
E739 Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data
E740/E740M Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
E746 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
E747 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
E748 Standard Practices for Thermal Neutron Radiography of Materials
E749 Standard Practice for Acoustic Emission Monitoring During Continuous Welding
E750 Standard Practice for Characterizing Acoustic Emission Instrumentation
E751 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
E766 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
E768 Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
E797/E797M Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
E801 Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices
E802 Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness
E803 Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams
E815 Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry
E826 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
E827 Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy
E837 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
E840 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
E841 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectrometry
E855 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
E877 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition
E878 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
E882 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
E883 Standard Guide for Reflected–Light Photomicrography
E908 Standard Practice for Calibrating Gaseous Reference Leaks
E915 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
E925 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
E930 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
E932 Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
E945 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric Titrimetry
E958 Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
E963 Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
E975 Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
E976 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
E977 Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
E983 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
E984 Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
E986 Standard Practice for Scanning Electron Microscope Beam Size Characterization
E995 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
E996 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
E999 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
E1000 Standard Guide for Radioscopy
E1001 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
E1002 Standard Practice for Leaks Using Ultrasonics
E1003 Standard Test Method for Hydrostatic Leak Testing
E1004 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
E1009 Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
E1010 Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
E1012 Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
E1016 Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers
E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
E1025 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
E1030 Standard Test Method for Radiographic Examination of Metallic Castings
E1032 Standard Test Method for Radiographic Examination of Weldments
E1033 Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature
E1049 Standard Practices for Cycle Counting in Fatigue Analysis
E1059 Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes
E1065 Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
E1066 Standard Test Method for Ammonia Colorimetric Leak Testing
E1067/E1067M Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
E1070 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
E1077 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
E1078 Standard Guide for Specimen Preparation and Mounting in Surface Analysis
E1079 Standard Practice for Calibration of Transmission Densitometers
E1085 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry
E1086 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
E1097 Standard Guide for Direct Current Plasma-Atomic Emission Spectrometry Analysis
E1106 Standard Test Method for Primary Calibration of Acoustic Emission Sensors
E1114 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
E1118/E1118M Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
E1127 Standard Guide for Depth Profiling in Auger Electron Spectroscopy
E1135 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
E1139 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
E1140 Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography
E1151 Standard Practice for Ion Chromatography Terms and Relationships
E1158 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material
E1161 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
E1162 Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
E1165 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
E1172 Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer
E1180 Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation
E1181 Standard Test Methods for Characterizing Duplex Grain Sizes
E1184 Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry
E1208 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process
E1209 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
E1210 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
E1211 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
E1212 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
E1213 Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
E1217 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
E1219 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
E1220 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
E1221 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
E1237 Standard Guide for Installing Bonded Resistance Strain Gages
E1245 Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
E1251 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
E1252 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
E1254 Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films
E1255 Standard Practice for Radioscopy
E1257 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
E1268 Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
E1277 Standard Test Method for Chemical Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
E1282 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
E1290 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
E1303 Practice for Refractive Index Detectors Used in Liquid Chromatography
E1304 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
E1306 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
E1311 Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
E1312 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
E1316 Standard Terminology for Nondestructive Examinations
E1319 Standard Guide for High-Temperature Static Strain Measurement
E1320 Standard Reference Radiographs for Titanium Castings
E1324 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
E1329 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis
E1335 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis
E1338 Guide for Identification of Metals and Alloys in Computerized Material Property Databases
E1351 Standard Practice for Production and Evaluation of Field Metallographic Replicas
E1359 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
E1361 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
E1382 Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
E1390 Standard Specification for Illuminators Used for Viewing Industrial Radiographs
E1409 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
E1411 Standard Practice for Qualification of Radioscopic Systems
E1416 Standard Test Method for Radioscopic Examination of Weldments
E1417/E1417M Standard Practice for Liquid Penetrant Testing
E1418 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
E1419 Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
E1421 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
E1426 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress
E1438 Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
E1441 Standard Guide for Computed Tomography (CT) Imaging
E1444/E1444M Standard Practice for Magnetic Particle Testing
E1446 Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Emission Spectrometry
E1447 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
E1449 Standard Guide for Supercritical Fluid Chromatography Terms and Relationships
E1450 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
E1453 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data
E1454 Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data
E1457 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
E1473 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
E1475 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data
E1476 Standard Guide for Metals Identification, Grade Verification, and Sorting
E1479 Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
E1495 Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
E1496 Standard Test Method for Neutron Radiographic Dimensional Measurements
E1504 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
E1507 Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument
E1508 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
E1510 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
E1511 Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
E1523 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
E1543 Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
E1552 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry
E1558 Standard Guide for Electrolytic Polishing of Metallographic Specimens
E1561 Standard Practice for Analysis of Strain Gage Rosette Data
E1568 Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
E1569 Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique
E1570 Standard Practice for Computed Tomographic (CT) Examination
E1571 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
E1577 Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis
E1578 Standard Guide for Laboratory Information Management Systems (LIMS)
E1587 Standard Test Methods for Chemical Analysis of Refined Nickel
E1600 Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry
E1601 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
E1603/E1603M Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
E1606 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes
E1614 Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems
E1621 Standard Guide for X-Ray Emission Spectrometric Analysis
E1629 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
E1634 Standard Guide for Performing Sputter Crater Depth Measurements
E1635 Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)
E1636 Standard Practice for Analytically Describing Depth-Profile and Linescan-Profile Data by an Extended Logistic Function
E1642 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
E1647 Standard Practice for Determining Contrast Sensitivity in Radioscopy
E1648 Standard Reference Radiographs for Examination of Aluminum Fusion Welds
E1653 Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
E1654 Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy
E1655 Standard Practices for Infrared Multivariate Quantitative Analysis
E1657 Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
E1659 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
E1672 Standard Guide for Computed Tomography (CT) System Selection
E1681 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
E1683 Standard Practice for Testing the Performance of Scanning Raman Spectrometers
E1685 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
E1695 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
E1698 Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
E1734 Standard Practice for Radioscopic Examination of Castings
E1735 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV
E1736 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels
E1742/E1742M Standard Practice for Radiographic Examination
E1747 Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications
E1763 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
E1770 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
E1771 Standard Test Method for Determination of Copper in Anode and Blister Copper
E1774 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
E1781 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
E1790 Standard Practice for Near Infrared Qualitative Analysis
E1791 Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
E1805 Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry
E1806 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
E1813 Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
E1814 Standard Practice for Computed Tomographic (CT) Examination of Castings
E1815 Standard Test Method for Classification of Film Systems for Industrial Radiography
E1816 Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
E1817 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
E1820 Standard Test Method for Measurement of Fracture Toughness
E1823 Standard Terminology Relating to Fatigue and Fracture Testing
E1829 Standard Guide for Handling Specimens Prior to Surface Analysis
E1832 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
E1833 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
E1834 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
E1835 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
E1840 Standard Guide for Raman Shift Standards for Spectrometer Calibration
E1852 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
E1856 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
E1862 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
E1865 Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
E1866 Standard Guide for Establishing Spectrophotometer Performance Tests
E1875 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
E1876 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
E1880 Standard Practice for Tissue Cryosection Analysis with SIMS
E1881 Standard Guide for Cell Culture Analysis with SIMS
E1888/E1888M Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
E1897 Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
E1898 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
E1901 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods
E1914 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
E1916 Standard Guide for Identification of Mixed Lots of Metals
E1917 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Molecular Absorption Spectrometry
E1920 Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings
E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
E1922 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
E1928 Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
E1930 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
E1931 Standard Guide for X-Ray Compton Scatter Tomography
E1932 Standard Guide for Acoustic Emission Examination of Small Parts
E1933 Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
E1934 Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
E1935 Standard Test Method for Calibrating and Meausring CT Density
E1936 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems
E1938 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometry
E1941 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
E1942 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
E1944 Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
E1947 Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data
E1948 Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data
E1949 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
E1950 Standard Practice for Reporting Results from Methods of Chemical Analysis
E1951 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
E1955 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs
E1961 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units
E1962 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
E1982 Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
E1999 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
E2001 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts
E2002 Standard Practice for Determining Total Image Unsharpness in Radiology
E2003 Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
E2007 Standard Guide for Computed Radiography
E2014 Standard Guide on Metallographic Laboratory Safety
E2015 Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
E2023 Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators
E2024/E2024M Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
E2027 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials
E2028 Standard Practice for Receiving, Testing and Reporting Results of Investigation of Metal, Ore, or Metal Related Samples that Are or May Be Involved in Litigation
E2033 Standard Practice for Computed Radiology (Photostimulable Luminescence Method)
E2050 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Spectrometry
E2056 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
E2066 Standard Guide for Validation of Laboratory Information Management Systems
E2075/E2075M Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod
E2076/E2076M Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
E2077 Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data
E2078 Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data
E2093 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
E2096/E2096M Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
E2104 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components
E2105 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
E2106 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
E2108 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
E2109 Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
E2142 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
E2143 Standard Practice for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
E2191/E2191M Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission
E2192 Standard Guide for Planar Flaw Height Sizing by Ultrasonics
E2207 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
E2208 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
E2209 Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
E2218 Standard Test Method for Determining Forming Limit Curves
E2223 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics
E2242 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
E2244 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2245 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2246 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2248 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
E2261 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
E2283 Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
E2293 Standard Practice for Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials for the Determination of Mercury
E2294 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry
E2295 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels
E2296 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry
E2297 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials
E2309/E2309M Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
E2310 Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
E2337/E2337M Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing
E2338 Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards
E2339 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
E2368 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
E2371 Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry
E2373 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
E2374 Standard Guide for Acoustic Emission System Performance Verification
E2375 Standard Practice for Ultrasonic Testing of Wrought Products
E2382 Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
E2422 Standard Digital Reference Images for Inspection of Aluminum Castings
E2426 Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS
E2428 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
E2437 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials
E2438 Standard Practice for Implementing Standard Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials
E2443 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
E2444 Terminology Relating to Measurements Taken on Thin, Reflecting Films
E2445 Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems
E2446 Standard Practice for Classification of Computed Radiology Systems
E2448 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E2472 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
E2478 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission
E2479 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves
E2491 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
E2492 Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test
E2529 Standard Guide for Testing the Resolution of a Raman Spectrometer
E2530 Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps
E2533 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
E2534 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
E2546 Standard Practice for Instrumented Indentation Testing
E2567 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
E2575 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys
E2580 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
E2581 Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications
E2582 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
E2594 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
E2597 Standard Practice for Manufacturing Characterization of Digital Detector Arrays
E2598 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
E2617 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
E2624 Standard Practice for Torque Calibration of Testing Machines and Devices
E2626 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
E2627 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
E2642 Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors
E2658 Standard Practices for Verification of Speed for Material Testing Machines
E2660 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications
E2661/E2661M Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications
E2662 Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
E2663 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
E2669 Standard Digital Reference Images for Titanium Castings
E2695 Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy
E2698 Standard Practice for Radiological Examination Using Digital Detector Arrays
E2699 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
E2700 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
E2712 Standard Test Methods for Forming Superplastic Metallic Sheet
E2714 Standard Test Method for Creep-Fatigue Testing
E2719 Standard Guide for Fluorescence—Instrument Calibration and Qualification
E2734/E2734M Standard Specification for Dimensions of Knife-Edge Flanges
E2736 Standard Guide for Digital Detector Array Radiology
E2737 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability
E2738 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
E2741 Standard Specification for Evaluation and Selection of Destinations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2742 Standard Specification for Evaluation and Selection of Exhibits for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2743 Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2745 Standard Specification for Evaluation and Selection of Audio Visual (AV) and Production for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2746 Standard Specification for Evaluation and Selection of Communication and Marketing Materials for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2747 Standard Specification for Evaluation and Selection of Onsite Offices for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2760 Standard Test Method for Creep-Fatigue Crack Growth Testing
E2767 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods
E2773 Standard Specification for Evaluation and Selection of Food and Beverage for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2774 Standard Specification for Evaluation and Selection of Venues for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2775 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
E2789 Standard Guide for Fretting Fatigue Testing
E2792 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
E2818 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
E2823 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)
E2824 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method
E2857 Standard Guide for Validating Analytical Methods
E2860 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
E2861 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
E2862 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
E2863 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization
F68 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
F432 Standard Specification for Roof and Rock Bolts and Accessories
F436 Standard Specification for Hardened Steel Washers
F436M Standard Specification for Hardened Steel Washers [Metric]
F467 Standard Specification for Nonferrous Nuts for General Use
F467M Standard Specification for Nonferrous Nuts for General Use (Metric)
F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
F468M Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
F537 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
F541 Standard Specification for Alloy Steel Eyebolts
F547 Standard Terminology of Nails for Use with Wood and Wood-Base Materials
F552 Standard Terminology Relating to Chain Link Fencing
F567 Standard Practice for Installation of Chain-Link Fence
F592 Standard Terminology of Collated and Cohered Fasteners and Their Application Tools
F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F594 Standard Specification for Stainless Steel Nuts
F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]
F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
F626 Standard Specification for Fence Fittings
F654 Standard Specification for Residential Chain Link Fence Gates
F668 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
F670 Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing
F680 Standard Test Methods for Nails
F681 Standard Practice for Use of Branch Connections
F682 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
F683 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
F704 Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
F707/F707M Standard Specification for Modular Gage Boards
F708 Standard Practice for Design and Installation of Rigid Pipe Hangers
F718 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
F721 Standard Specification for Gage Piping Assemblies
F722 Standard Specification for Welded Joints for Shipboard Piping Systems
F738M Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
F765 Standard Specification for Wildcats, Ship Anchor Chain
F782 Standard Specification for Doors, Furniture, Marine
F783 Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung
F788/F788M Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
F812/F812M Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
F821/F821M Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine
F822 Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
F823 Standard Specification for Desk, Log, Marine, Steel, with Cabinet
F824 Standard Specification for Tables, Mess, Marine, Steel
F825 Standard Specification for Drawers, Furniture, Marine, Steel
F826 Standard Specification for Tops, Furniture, Marine, Steel
F835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
F835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
F836M Standard Specification for Style 1 Stainless Steel Metric Nuts
F837 Standard Specification for Stainless Steel Socket Head Cap Screws
F837M Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
F841 Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels
F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
F856 Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)
F879M Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
F879 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
F880M Standard Specification for Stainless Steel Socket Set Screws (Metric)
F880 Standard Specification for Stainless Steel Socket-Set Screws
F885 Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS ¼ to 2
F900 Standard Specification for Industrial and Commercial Swing Gates
F901 Standard Specification for Aluminum Transmission Tower Bolts and Nuts
F906 Standard Specification for Letters and Numerals for Ships
F912 Standard Specification for Alloy Steel Socket Set Screws
F912M Standard Specification for Alloy Steel Socket Set Screws (Metric)
F934 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
F940 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
F941 Standard Practice for Inspection of Marine Surface Preparation and Coating Application
F956 Standard Specification for Bell, Cast, Sound Signalling
F957 Standard Specification for Gong, Sound Signaling
F959M Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]
F959 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
F964 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
F969 Standard Practice for Construction of Chain-Link Tennis Court Fence
F985 Standard Specification for Panama Canal Pilot Platform
F986 Standard Specification for Suction Strainer Boxes
F987 Standard Specification for Portable Intermediate Flush Deck Stanchion
F991M Standard Specification for Docking/Drain Plug and Boss Assemblies [Metric]
F992 Standard Specification for Valve Label Plates
F993 Standard Specification for Valve Locking Devices
F994 Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections
F998 Standard Specification for Centrifugal Pump, Shipboard Use
F1003 Standard Specification for Searchlights on Motor Lifeboats
F1005 Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration
F1006 Standard Specification for Entrainment Separators for Use in Marine Piping Applications
F1007 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
F1014 Standard Specification for Flashlights on Vessels
F1018 Standard Specification for Steel Emergency Gear Stowage Locker
F1019M Standard Specification for Steel Deck Gear Stowage Box [Metric]
F1020 Standard Specification for Line-Blind Valves for Marine Applications
F1030 Standard Practice for Selection of Valve Operators
F1043 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
F1068 Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
F1069 Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
F1070 Standard Specification for Doors, Non-Tight, for Marine Use
F1071 Standard Specification for Expanded-Metal Bulkhead Panels
F1072 Standard Specification for Expanded-Metal Doors
F1073 Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
F1074 Standard Specification for Cleats, Welded Horn Type
F1075 Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
F1076 Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
F1077 Standard Guide for Selection of Committee F16 Fastener Specifications
F1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
F1085 Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
F1092 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
F1097 Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)
F1098 Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24
F1099M Standard Specification for Rat Guards, Ship's (Metric)
F1106 Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)
F1120 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
F1121 Standard Specification for International Shore Connections for Marine Fire Applications
F1122 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
F1123 Standard Specification for Non-Metallic Expansion Joints
F1130 Standard Practice for Inspecting the Coating System of a Ship
F1134 Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
F1136/F1136M Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
F1137 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
F1138 Standard Specification for Spray Shields for Mechanical Joints
F1139 Standard Specification for Steam Traps and Drains
F1142 Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight
F1143 Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight
F1144 Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged
F1145 Standard Specification for Turnbuckles, Swaged, Welded, Forged
F1155 Standard Practice for Selection and Application of Piping System Materials
F1166 Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
F1172 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
F1173 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
F1178 Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
F1179 Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
F1182 Standard Specification for Anodes, Sacrificial Zinc Alloy
F1183 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
F1184 Standard Specification for Industrial and Commercial Horizontal Slide Gates
F1196 Standard Specification for Sliding Watertight Door Assemblies
F1197 Standard Specification for Sliding Watertight Door Control Systems
F1198 Standard Guide for Shipboard Fire Detection Systems
F1199 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
F1200 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
F1201 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
F1207M Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]
F1244 Standard Specification for Berths, Marine
F1245 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
F1267 Standard Specification for Metal, Expanded, Steel
F1270 Standard Practice for Preparing and Locating Emergency Muster Lists
F1271 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
F1273 Standard Specification for Tank Vent Flame Arresters
F1297 Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment
F1298 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
F1309 Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
F1311 Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges
F1312 Standard Specification for Brick, Insulating, High Temperature, Fire Clay
F1321 Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
F1322 Standard Guide for Selection of Shipboard Incinerators
F1323 Standard Specification for Shipboard Incinerators
F1330 Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe
F1331 Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces
F1332 Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10)
F1333 Standard Specification for Construction of Fire and Foam Station Cabinets
F1337 Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities
F1338 Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly
F1345 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
F1347 Standard Specification for Manually Operated Fueling Hose Reels
F1348/F1348M Standard Specification for Pneumatic Rotary Descaling Machines
F1370 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
F1379 Standard Terminology Relating to Barbed Tape
F1385 Standard Practice for Platforms in Cargo Tanks
F1386 Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding
F1387 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
F1428 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
F1431 Standard Specification for Water Trap for Diesel Exhaust
F1433 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
F1455 Standard Guide for Selection of Structural Details for Ship Construction
F1469 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
F1470 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
F1476 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
F1503 Standard Practice for Machine/Process Capability Study Procedure
F1507 Standard Specification for Surge Suppressors for Shipboard Use
F1508 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
F1510 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
F1511 Standard Specification for Mechanical Seals for Shipboard Pump Applications
F1546/F1546M Standard Specification for Fire Hose Nozzles
F1547 Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding
F1548 Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
F1553 Standard Guide for Specifying Chain Link Fence
F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
F1565 Standard Specification for Pressure-Reducing Valves for Steam Service
F1567 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
F1575 Standard Test Method for Determining Bending Yield Moment of Nails
F1664 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
F1665 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
F1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
F1669M Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]
F1685 Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems
F1712 Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications
F1716 Standard Guide for Transition and Performance of Marine Software Systems Maintenance
F1718 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
F1754 Standard Guide for Marine Vessel Structural Inspection Considerations
F1755M Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]
F1756 Standard Guide for Implementation of a Fleet Management System Network
F1757 Standard Guide for Digital Communication Protocols for Computerized Systems
F1789 Standard Terminology for F16 Mechanical Fasteners
F1791 Standard Specification for Filters Used in Air or Nitrogen Systems
F1792 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
F1793 Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service
F1794 Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
F1795 Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
F1799 Standard Guide for Shipboard Generated Waste Management Audits
F1808 Standard Guide for Weight Control Technical Requirements for Surface Ships
F1835 Standard Guide for Cable Splicing Installations
F1836M Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
F1837M Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
F1852 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
F1878 Standard Guide for Escort Vessel Evaluation and Selection
F1883 Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units
F1908 Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
F1910 Standard Specification for Long Barbed Tape Obstacles
F1911 Standard Practice for Installation of Barbed Tape
F1940 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
F1941M Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]
F1941 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))
F1985 Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves
F1994 Standard Test Method for Shipboard Fixed Foam Firefighting Systems
F1999 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
F2000 Standard Guide for Fences for Baseball and Softball Fields
F2001 Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record
F2014 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
F2015 Standard Specification for Lap Joint Flange Pipe End Applications
F2016 Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings
F2017 Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration
F2039 Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program
F2044 Standard Specification for Liquid Level Indicating Equipment, Electrical
F2045 Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
F2046 Standard Specification for Tachometers, Various
F2049 Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
F2070 Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
F2071 Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
F2087 Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick
F2094/F2094M Standard Specification for Silicon Nitride Bearing Balls
F2133 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Insulated Marine Bulkheads and Decks, Constructed of Steel
F2154 Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced
F2161 Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils
F2162 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
F2163 Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
F2168 Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
F2191 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
F2192 Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders
F2200 Standard Specification for Automated Vehicular Gate Construction
F2215 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
F2218 Standard Guide for Hardware Implementation for Computerized Systems
F2246 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
F2280 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
F2281 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
F2282 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
F2283 Standard Specification for Shipboard Oil Pollution Abatement System
F2328M Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]
F2328 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
F2329 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
F2332 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
F2361 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
F2362 Standard Specification for Temperature Monitoring Equipment
F2363/F2363M Standard Specification for Sewage and Graywater Flow Through Treatment Systems
F2403 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
F2408 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
F2409 Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas
F2430 Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
F2431 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
F2437 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
F2443 Standard Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End
F2444 Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
F2446 Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
F2453/F2453M Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
F2482 Standard Specification for Load-Indicating Externally Threaded Fasteners
F2488 Standard Terminology for Rolling Element Bearings
F2489 Standard Guide for Instrument and Precision Bearing Lubricants-Part 2 Greases
F2511 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
F2548 Standard Specification for Expanded Metal Fence Systems for Security Purposes
F2589 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
F2590 Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
F2591 Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
F2611 Standard Guide for Design and Construction of Chain Link Security Fencing
F2630 Standard Guide for Self-Closing/Self-Latching General-Purpose Gates
F2631 Standard Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities
F2661 Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
F2674 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]
F2688 Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
F2698 Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities
F2699 Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
F2730/F2730M Standard Specification for Silicon Nitride Cylindrical Bearing Rollers
F2780 Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers
F2781 Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems
F2798 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
F2814 Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
F2832 Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners
F2833 Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
F2876 Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications
F2877 Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
F2919/F2919M Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels
F2934 Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
F2935 Standard Specification for Chocks, Panama, Mooring Cast Steel
F2936 Standard Specification for Chocks, Ship Mooring, Cast Steel
G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
G2/G2M Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C] or in Steam at 750°F [400<
G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
G4 Standard Guide for Conducting Corrosion Tests in Field Applications
G5 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data
G28 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
G30 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
G31 Standard Practice for Laboratory Immersion Corrosion Testing of Metals
G32 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
G33 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
G34 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
G35 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
G36 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
G39 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
G40 Standard Terminology Relating to Wear and Erosion
G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
G46 Standard Guide for Examination and Evaluation of Pitting Corrosion
G47 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
G48 : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
G50 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
G51 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
G52 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
G56 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials
G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
G60 Standard Practice for Conducting Cyclic Humidity Exposures
G61 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
G67 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
G71 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
G73 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
G75 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
G76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
G78 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
G81 Standard Test Method for Jaw Crusher Gouging Abrasion Test
G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
G84 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
G85 Standard Practice for Modified Salt Spray (Fog) Testing
G87 Standard Practice for Conducting Moist SO2 Tests
G91 Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation
G92 Standard Practice for Characterization of Atmospheric Test Sites
G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
G97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
G98 Standard Test Method for Galling Resistance of Materials
G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
G103 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
G108 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
G110 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
G112 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
G115 Standard Guide for Measuring and Reporting Friction Coefficients
G116 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
G118 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases
G119 Standard Guide for Determining Synergism Between Wear and Corrosion
G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
G132 Standard Test Method for Pin Abrasion Testing
G133 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
G134 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals
G137 Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
G140 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
G143 Standard Test Method for Measurement of Web/Roller Friction Characteristics
G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
G148 Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
G157 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
G158 Standard Guide for Three Methods of Assessing Buried Steel Tanks
G161 Standard Guide for Corrosion-Related Failure Analysis
G162 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
G163 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements
G164 Standard Test Method for Determination of Surface Lubrication on Flexible Webs
G165 Standard Practice for Determining Rail-to-Earth Resistance
G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
G170 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
G171 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
G174 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
G176 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
G180 Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete
G181 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
G182 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
G184 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
G186 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
G190 Standard Guide for Developing and Selecting Wear Tests
G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
G194 Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser
G196 Standard Test Method for Galling Resistance of Material Couples
G198 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
G199 Standard Guide for Electrochemical Noise Measurement
G200 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
G202 Standard Test Method for Using Atmospheric Pressure Rotating Cage
G203 Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
G204 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
G205 Standard Guide for Determining Corrosivity of Crude Oils
G206 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
G209 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
NACE/ASTMG193 Standard Terminology and Acronyms Relating to Corrosion
R0001 Cross Index of Standards for Metal Powders and Metal Powder Products (This is not an ASTM standard; available as PDF, only)
R0006 Condensed Metric Practice Guide for Corrosion (This is not an ASTM Publication)
R0007 General Description of Production, Properties, and Uses of Sintered Metal Powder Bearings and Structural Parts (This is not an ASTM Standard; available as PDF, only)
R0013 Statistical Aspects of Mechanical Property Assurance (This is not an ASTM standard; available as PDF, only)
R0027 Standards Related to Nondestructive Testing Developed by ASTM Committees Other Than Committee E-7 (This is not an ASTM standard; available as PDF, only)
R0033 ASME B36.10M-2004 Welded and Seamless Wrought Steel Pipe
R0036 Stainless Steel Pipe (This is not an ASTM standard; available as PDF only)


Return to Previous Page