ASTM Standards Source (Online and DVD-ROM):
GeoTechnical Collection

Return to Previous Page

TABLE OF CONTENTS
(Standards will be added, revised or withdrawn on an ongoing basis.)

D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D422 Standard Test Method for Particle-Size Analysis of Soils
D422 Standard Test Method for Particle-Size Analysis of Soils
D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils
D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils
D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids
D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids
D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve
D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve
D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
D1452 Standard Practice for Soil Exploration and Sampling by Auger Borings
D1452 Standard Practice for Soil Exploration and Sampling by Auger Borings
D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
D2113 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
D2113 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
D2434 Standard Test Method for Permeability of Granular Soils (Constant Head)
D2434 Standard Test Method for Permeability of Granular Soils (Constant Head)
D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil
D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil
D2844 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
D2844 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
D3080/D3080M Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
D3080/D3080M Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
D3441 Standard Test Method for Mechanical Cone Penetration Tests of Soil
D3441 Standard Test Method for Mechanical Cone Penetration Tests of Soil
D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
D3689 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
D3689 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
D3966 Standard Test Methods for Deep Foundations Under Lateral Load
D3966 Standard Test Methods for Deep Foundations Under Lateral Load
D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
D3999 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
D3999 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method
D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method
D4016 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
D4016 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
D4083 Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
D4083 Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
D4186 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
D4186 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
D4219 Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils
D4219 Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils
D4220 Standard Practices for Preserving and Transporting Soil Samples
D4220 Standard Practices for Preserving and Transporting Soil Samples
D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
D4380 Standard Test Method for Density of Bentonitic Slurries
D4380 Standard Test Method for Density of Bentonitic Slurries
D4381 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
D4381 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
D4394 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
D4394 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
D4395 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
D4395 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
D4403 Standard Practice for Extensometers Used in Rock
D4403 Standard Practice for Extensometers Used in Rock
D4427 Standard Classification of Peat Samples by Laboratory Testing
D4427 Standard Classification of Peat Samples by Laboratory Testing
D4428/D4428M Standard Test Methods for Crosshole Seismic Testing
D4428/D4428M Standard Test Methods for Crosshole Seismic Testing
D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
D4435 Standard Test Method for Rock Bolt Anchor Pull Test
D4435 Standard Test Method for Rock Bolt Anchor Pull Test
D4436 Standard Test Method for Rock Bolt Long-Term Load Retention Test
D4436 Standard Test Method for Rock Bolt Long-Term Load Retention Test
D4452 Standard Practice for X-Ray Radiography of Soil Samples
D4452 Standard Practice for X-Ray Radiography of Soil Samples
D4506 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test
D4506 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test
D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
D4525 Standard Test Method for Permeability of Rocks by Flowing Air
D4525 Standard Test Method for Permeability of Rocks by Flowing Air
D4535 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
D4535 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
D4543 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
D4543 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils
D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils
D4553 Standard Test Method for Determining In Situ Creep Characteristics of Rock
D4553 Standard Test Method for Determining In Situ Creep Characteristics of Rock
D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
D4564 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
D4564 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
D4611 Standard Test Method for Specific Heat of Rock and Soil
D4611 Standard Test Method for Specific Heat of Rock and Soil
D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks
D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks
D4623 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge
D4623 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge
D4633 Standard Test Method for Energy Measurement for Dynamic Penetrometers
D4633 Standard Test Method for Energy Measurement for Dynamic Penetrometers
D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
D4645 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method
D4645 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method
D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils
D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils
D4729 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method
D4729 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method
D4753 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
D4829 Standard Test Method for Expansion Index of Soils
D4829 Standard Test Method for Expansion Index of Soils
D4879 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock
D4879 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock
D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
D4945 Standard Test Method for High-Strain Dynamic Testing of Piles
D4945 Standard Test Method for High-Strain Dynamic Testing of Piles
D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
D4971 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
D4971 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
D5030 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
D5030 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
D5079 Standard Practices for Preserving and Transporting Rock Core Samples
D5079 Standard Practices for Preserving and Transporting Rock Core Samples
D5080 Standard Test Method for Rapid Determination of Percent Compaction
D5080 Standard Test Method for Rapid Determination of Percent Compaction
D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
D5093 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
D5093 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
D5202 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
D5202 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
D5333 Standard Test Method for Measurement of Collapse Potential of Soils
D5333 Standard Test Method for Measurement of Collapse Potential of Soils
D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
D5608 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
D5608 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
D5720 Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes
D5720 Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes
D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
D5778 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
D5778 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
D5780 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
D5780 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
D5873 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
D5873 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil
D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil
D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
D6026 Standard Practice for Using Significant Digits in Geotechnical Data
D6027 Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes
D6027 Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes
D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
D6035 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
D6035 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
D6230 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
D6230 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
D6449 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
D6449 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
D6459 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
D6459 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
D6460 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D6460 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D6461 Standard Specification for Silt Fence Materials
D6461 Standard Specification for Silt Fence Materials
D6462 Standard Practice for Silt Fence Installation
D6462 Standard Practice for Silt Fence Installation
D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
D6475 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
D6475 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
D6519 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
D6519 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
D6539 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air
D6539 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air
D6598 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
D6598 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
D6599 Standard Practice for Construction of Live Fascines on Slopes
D6599 Standard Practice for Construction of Live Fascines on Slopes
D6635 Standard Test Method for Performing the Flat Plate Dilatometer
D6635 Standard Test Method for Performing the Flat Plate Dilatometer
D6684 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
D6684 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
D6685 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
D6685 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
D6689 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
D6711 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
D6711 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
D6765 Standard Practice for Live Staking
D6765 Standard Practice for Live Staking
D6780 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
D6780 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
D6884 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
D6884 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
D6910/D6910M Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
D6910/D6910M Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
D6939 Standard Practice for Brushmattressing
D6939 Standard Practice for Brushmattressing
D7012 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
D7012 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
D7013/D7013M Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
D7013/D7013M Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
D7014 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
D7014 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
D7047 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifier
D7047 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifier
D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
D7099 Standard Terminology Relating to Frozen Soil and Rock
D7099 Standard Terminology Relating to Frozen Soil and Rock
D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
D7181 Method for Consolidated Drained Triaxial Compression Test for Soils
D7181 Method for Consolidated Drained Triaxial Compression Test for Soils
D7207 Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions
D7207 Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions
D7208 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D7208 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
D7276 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
D7276 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
D7277 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
D7277 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
D7299 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
D7299 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
D7351 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
D7351 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
D7367 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
D7367 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
D7372 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
D7383 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
D7383 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
D7400 Standard Test Methods for Downhole Seismic Testing
D7400 Standard Test Methods for Downhole Seismic Testing
D7401 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
D7401 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
D7503 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
D7503 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
D7608 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
D7608 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
D7625 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
D7625 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
D7759 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
D7759 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
D7762 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
D7762 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash

E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
E541 Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
E651/E651M Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
E699 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
E1301 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
E1323 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
E2066 Standard Guide for Validation of Laboratory Information Management Systems
E2159 Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts


Return to Previous Page