DOD Collection
C
C4-04e1 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
C5-03 Standard Specification for Quicklime for Structural Purposes
C12-07 Standard Practice for Installing Vitrified Clay Pipe Lines
C20-00(2005) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C24-01(2006) Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
C25-06 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C27-98(2002) Standard Classification of Fireclay and High-Alumina Refractory Brick
C28/C28M-00(2005) Standard Specification for Gypsum Plasters
C29/C29M-07 Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate
C31/C31M-08a Standard Practice for Making and Curing Concrete Test Specimens in the Field
C32-05 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
C33-07 Standard Specification for Concrete Aggregates
C34-03 Standard Specification for Structural Clay Load-Bearing Wall Tile
C35-01(2005) Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
C39/C39M-05e1 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C40-04 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
C42/C42M-04 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C51-07 Standard Terminology Relating to Lime and Limestone (as used by the Industry)
C56-05 Standard Specification for Structural Clay Non-Load-Bearing Tile
C61/C61M-00(2006) Standard Specification for Gypsum Keene's Cement
C62-05 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
C67-07a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
C70-06 Standard Test Method for Surface Moisture in Fine Aggregate
C73-05 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
C76-08a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C76M-08a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
C78-08 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
C87-05 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
C88-05 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
C91-05 Standard Specification for Masonry Cement
C92-95(2005) Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
C97-02 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C99-87(2006) Standard Test Method for Modulus of Rupture of Dimension Stone
C109/C109M-07 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
C110-08 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C113-02 Standard Test Method for Reheat Change of Refractory Brick
C117-04 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
C121-06 Standard Test Method for Water Absorption of Slate
C123-04 Standard Test Method for Lightweight Particles in Aggregate
C126-99(2005) Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
C127-07 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
C131-06 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C133-97(2003) Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C135-96(2003) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C136-06 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C138/C138M-08 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C139-05 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
C141-97(2005) Standard Specification for Hydraulic Hydrated Lime for Structural Purposes
C142-97(2004) Standard Test Method for Clay Lumps and Friable Particles in Aggregates
C143/C143M-08 Standard Test Method for Slump of Hydraulic-Cement Concrete
C144-04 Standard Specification for Aggregate for Masonry Mortar
C148-00(2006) Standard Test Methods for Polariscopic Examination of Glass Containers
C149-86(2005) Standard Test Method for Thermal Shock Resistance of Glass Containers
C156-05 Standard Test Method for Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete
C157/C157M-06 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
C158-02(2007) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
C159-06 Standard Specification for Vitrified Clay Filter Blocks
C162-05 Standard Terminology of Glass and Glass Products
C165-07 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C167-98(2003) Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C169-92(2005) Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
C171-07 Standard Specification for Sheet Materials for Curing Concrete
C172-08 Standard Practice for Sampling Freshly Mixed Concrete
C174/C174M-06 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
C177-04 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C183-02 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
C185-08 Standard Test Method for Air Content of Hydraulic Cement Mortar
C188-95(2003) Standard Test Method for Density of Hydraulic Cement
C192/C192M-07 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
C195-07 Standard Specification for Mineral Fiber Thermal Insulating Cement
C196-00(2005) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C203-05a Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C206-03 Standard Specification for Finishing Hydrated Lime
C207-06 Standard Specification for Hydrated Lime for Masonry Purposes
C208-08 Standard Specification for Cellulosic Fiber Insulating Board
C210-95(2007)e1 Standard Test Method for Reheat Change of Insulating Firebrick
C212-00(2006) Standard Specification for Structural Clay Facing Tile
C215-02 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens
C216-07a Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C217-94(2004) Standard Test Method for Weather Resistance of Slate
C225-85(2004) Standard Test Methods for Resistance of Glass Containers to Chemical Attack
C227-03 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
C231-08b Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C232-07 Standard Test Methods for Bleeding of Concrete
C233-07 Standard Test Method for Air-Entraining Admixtures for Concrete
C241-90(2005) Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C260-06 Standard Specification for Air-Entraining Admixtures for Concrete
C267-01(2006) Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C270-07a Standard Specification for Mortar for Unit Masonry
C282-99(2005) Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)
C286-99(2004) Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
C289-07 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
C293-08 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
C294-05 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
C295-03 Standard Guide for Petrographic Examination of Aggregates for Concrete
C296-00(2004)e1 Standard Specification for Asbestos-Cement Pressure Pipe
C297/C297M-04 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
C302-95(2007) Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303-07 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
C307-03(2008) Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C311-07 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
C315-07 Standard Specification for Clay Flue Liners and Chimney Pots
C317/C317M-00(2005) Standard Specification for Gypsum Concrete
C318/C318M-00(2005) Standard Specification for Gypsum Formboard
C321-00(2005) Standard Test Method for Bond Strength of Chemical-Resistant Mortars
C330-05 Standard Specification for Lightweight Aggregates for Structural Concrete
C331-05 Standard Specification for Lightweight Aggregates for Concrete Masonry Units
C332-07 Standard Specification for Lightweight Aggregates for Insulating Concrete
C335-05ae1 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C336-71(2005) Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
C338-93(2008) Standard Test Method for Softening Point of Glass
C356-03 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C361M-05 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe [Metric]
C361-05e1 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
C365/C365M-05 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
C366/C366M-05 Standard Test Methods for Measurement of Thickness of Sandwich Cores
C390-08e1 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C401-91(2005) Standard Classification of Alumina and Alumina-Silicate Castable Refractories
C403/C403M-08 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C408-88(2006) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
C411-05 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C412-05a Standard Specification for Concrete Drain Tile
C412M-05a Standard Specification for Concrete Drain Tile [Metric]
C413-01(2006) Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C414-03(2008) Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C418-05 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
C425-04 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
C428-05(2006) Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
C443-05a Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
C444M-03 Standard Specification for Perforated Concrete Pipe [Metric]
C444-03 Standard Specification for Perforated Concrete Pipe
C459-97(2006) Standard Test Methods for Asbestos-Cement Flat Products
C472-99(2004) Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
C475/C475M-02(2007) Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C476-07 Standard Specification for Grout for Masonry
C478M-08e1 Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)
C481-99(2005) Standard Test Method for Laboratory Aging of Sandwich Constructions
C494/C494M-08 Standard Specification for Chemical Admixtures for Concrete
C495-07 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
C496/C496M-04e1 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
C497-05 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
C497M-05 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
C499-78(2003) Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
C506-08a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C506M-08a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
C507-08a Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C507M-08a Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
C509-06 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C514-04 Standard Specification for Nails for the Application of Gypsum Board
C516-02 Standard Specification for Vermiculite Loose Fill Thermal Insulation
C518-04 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C531-00(2005) Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C534/C534M-08 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C535-03e1 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C541-98(2006) Standard Specification for Linings for Asbestos-Cement Pipe
C542-05 Standard Specification for Lock-Strip Gaskets
C547-07e1 Standard Specification for Mineral Fiber Pipe Insulation
C549-06 Standard Specification for Perlite Loose Fill Insulation
C550-03 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
C551-07 Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
C552-07 Standard Specification for Cellular Glass Thermal Insulation
C553-02e1 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C557-03e1 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
C561-91(2005) Standard Test Method for Ash in a Graphite Sample
C562-91(2005) Standard Test Method for Moisture in a Graphite Sample
C564-03a Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C566-97(2004) Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
C567-05a Standard Test Method for Determining Density of Structural Lightweight Concrete
C568-03 Standard Specification for Limestone Dimension Stone
C578-08 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
C579-01(2006) Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C580-02(2008) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C581-03(2008)e1 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C582-02 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
C586-05 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
C587-04 Standard Specification for Gypsum Veneer Plaster
C591-08 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C597-02 Standard Test Method for Pulse Velocity Through Concrete
C603-04(2008) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C612-04e1 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
C613/C613M-97(2008) Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
C615-03 Standard Specification for Granite Dimension Stone
C616-08 Standard Specification for Quartz-Based Dimension Stone
C617-98(2003) Standard Practice for Capping Cylindrical Concrete Specimens
C618-08 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C629-03 Standard Specification for Slate Dimension Stone
C633-01 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
C635/C635M-07 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636/C636M-08 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
C637-98a(2003) Standard Specification for Aggregates for Radiation-Shielding Concrete
C638-92(2002) Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete
C645-08a Standard Specification for Nonstructural Steel Framing Members
C651-91(2005)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
C652-07 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
C654-05a Standard Specification for Porous Concrete Pipe
C654M-05a Standard Specification for Porous Concrete Pipe [Metric]
C655M-04e1 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric]
C658-98(2008) Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
C659-90(2008) Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
C661-06 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C663-98(2008) Standard Specification for Asbestos-Cement Storm Drain Pipe
C666/C666M-03 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
C668-98(2008) Standard Specification for Asbestos-Cement Transmission Pipe
C670-03 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
C679-03 Standard Test Method for Tack-Free Time of Elastomeric Sealants
C695-91(2005) Standard Test Method for Compressive Strength of Carbon and Graphite
C700-07a Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
C702-98(2003) Standard Practice for Reducing Samples of Aggregate to Testing Size
C719-93(2005) Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C725-90(2008) Standard Specification for Semidense Mineral Fiber Siding
C726-05e1 Standard Specification for Mineral Fiber Roof Insulation Board
C728-05 Standard Specification for Perlite Thermal Insulation Board
C732-06 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C739-05be1 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
C744-05 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C754-07 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
C778-06 Standard Specification for Standard Sand
C780-07a Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C792-04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C793-05 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C794-06 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C795-03 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C796-04 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
C800-05 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
C805-02 Standard Test Method for Rebound Number of Hardened Concrete
C811-98(2008) Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
C816-85(2005) Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
C822-08a Standard Terminology Relating to Concrete Pipe and Related Products
C823/C823M-07 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
C827-01a(2005) Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
C834-05 Standard Specification for Latex Sealants
C836-06 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
C841-03(2008)e1 Standard Specification for Installation of Interior Lathing and Furring
C843-99(2006) Standard Specification for Application of Gypsum Veneer Plaster
C844-04 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C847-06 Standard Specification for Metal Lath
C860-00(2005) Standard Practice for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C864-05 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C865-02(2007) Standard Practice for Firing Refractory Concrete Specimens
C873/C873M-04e1 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
C881/C881M-02 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
C882/C882M-05e1 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
C884/C884M-98(2005) Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
C889-06 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd
2
O
3
) Powder
C901-01 Standard Specification for Prefabricated Masonry Panels
C913-08 Standard Specification for Precast Concrete Water and Wastewater Structures
C916-85(2007) Standard Specification for Adhesives for Duct Thermal Insulation
C920-08 Standard Specification for Elastomeric Joint Sealants
C921-03a Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C924-02 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
C930-05 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
C932-06 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
C937-02 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
C939-02 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
C942-99(2004) Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C952-02e1 Standard Test Method for Bond Strength of Mortar to Masonry Units
C954-07 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C966-98(2008) Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
C969-02 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C977-03 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
C989-06 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
C995-01 Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone
C1002-07 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1015-06 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C1019-08a Standard Test Method for Sampling and Testing Grout
C1029-07 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
C1036-06 Standard Specification for Flat Glass
C1047-05 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C1048-04 Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass
C1053-00(2005) Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
C1063-08 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1064/C1064M-08 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
C1071-05e1 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
C1089-06 Standard Specification for Spun Cast Prestressed Concrete Poles
C1136-08 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1488-04 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation