ASTM Standards Source (Online and CD-ROM):
Construction Collection

Return to Previous Page

TABLE OF CONTENTS
(Standards will be added, revised or withdrawn on an ongoing basis.)

C4 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
C5 Standard Specification for Quicklime for Structural Purposes
C10 Standard Specification for Natural Cement
C11 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
C12 Standard Practice for Installing Vitrified Clay Pipe Lines
C14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
C14M Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
C16 Standard Test Method for Load Testing Refractory Shapes at High Temperatures
C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C22/C22M Standard Specification for Gypsum
C24 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
C25 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C27 Standard Classification of Fireclay and High-Alumina Refractory Brick
C28/C28M Standard Specification for Gypsum Plasters
C29/C29M Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate
C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field
C32 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
C33 Standard Specification for Concrete Aggregates
C34 Standard Specification for Structural Clay Load-Bearing Wall Tile
C35 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C40 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C43 Standard Terminology of Structural Clay Products
C50 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C51 Standard Terminology Relating to Lime and Limestone (as used by the Industry)
C55 Standard Specification for Concrete Building Brick
C56 Standard Specification for Structural Clay Non-Load-Bearing Tile
C59/C59M Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C61/C61M Standard Specification for Gypsum Keene's Cement
C62 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
C70 Standard Test Method for Surface Moisture in Fine Aggregate
C71 Standard Terminology Relating to Refractories
C73 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
C76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C78 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
C87 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
C88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
C90 Standard Specification for Loadbearing Concrete Masonry Units
C91 Standard Specification for Masonry Cement
C92 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
C94/C94M Standard Specification for Ready-Mixed Concrete
C97 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C99 Standard Test Method for Modulus of Rupture of Dimension Stone
C108 Standard Symbols for Heat Transmission
C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars(Using 2-in. or [50-mm] Cube Specimens)
C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C113 Standard Test Method for Reheat Change of Refractory Brick
C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement
C115 Standard Test Method for Fineness of Portland Cement by the Turbidimeter
C117 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
C118 Standard Specification for Concrete Pipe for Irrigation or Drainage
C118M Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric]
C119 Standard Terminology Relating to Dimension Stone
C120 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
C121 Standard Test Method for Water Absorption of Slate
C123 Standard Test Method for Lightweight Particles in Aggregate
C125 Standard Terminology Relating to Concrete and Concrete Aggregates
C126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
C129 Standard Specification for Nonloadbearing Concrete Masonry Units
C131 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C133 Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C134 Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C135 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C139 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
C140 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
C141 Standard Specification for Hydraulic Hydrated Lime for Structural Purposes
C142 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
C143/C143M Standard Test Method for Slump of Hydraulic Cement Concrete
C144 Standard Specification for Aggregate for Masonry Mortar
C150 Standard Specification for Portland Cement
C151 Standard Test Method for Autoclave Expansion of Hydraulic Cement
C155 Standard Classification of Insulating Firebrick
C156 Standard Test Method for Water Retention by Concrete Curing Materials
C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
C159 Standard Specification for Vitrified Clay Filter Blocks
C163 Standard Practice for Mixing Thermal Insulating Cement Samples
C165 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C166 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
C167 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C168 Standard Terminology Relating to Thermal Insulation
C170 Standard Test Method for Compressive Strength of Dimension Stone
C171 Standard Specification for Sheet Materials for Curing Concrete
C172 Standard Practice for Sampling Freshly Mixed Concrete
C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C174/C174M Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C179 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C181 Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
C182 Standard Test Method for Thermal Conductivity of Insulating Firebrick
C183 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
C185 Standard Test Method for Air Content of Hydraulic Cement Mortar
C186 Standard Test Method for Heat of Hydration of Hydraulic Cement
C187 Standard Test Method for Normal Consistency of Hydraulic Cement
C188 Standard Test Method for Density of Hydraulic Cement
C191 Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
C195 Standard Specification for Mineral Fiber Thermal Insulating Cement
C196 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C198 Standard Test Method for Cold Bonding Strength of Refractory Mortar
C199 Standard Test Method for Pier Test for Refractory Mortars
C201 Standard Test Method for Thermal Conductivity of Refractories
C202 Standard Test Method for Thermal Conductivity of Refractory Brick
C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C204 Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus
C206 Standard Specification for Finishing Hydrated Lime
C207 Standard Specification for Hydrated Lime for Masonry Purposes
C208 Standard Specification for Cellulosic Fiber Insulating Board
C209 Standard Test Methods for Cellulosic Fiber Insulating Board
C210 Standard Test Method for Reheat Change of Insulating Firebrick
C212 Standard Specification for Structural Clay Facing Tile
C215 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens
C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C217 Standard Test Method for Weather Resistance of Slate
C219 Standard Terminology Relating to Hydraulic Cement
C220 Standard Specification for Flat Asbestos-Cement Sheets
C221 Standard Specification for Corrugated Asbestos-Cement Sheets
C222 Standard Specification for Asbestos-Cement Roofing Shingles
C223 Standard Specification for Asbestos-Cement Siding
C226 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
C230/C230M Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
C231 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C232 Standard Test Methods for Bleeding of Concrete
C233 Standard Test Method for Air-Entraining Admixtures for Concrete
C240 Standard Test Methods of Testing Cellular Glass Insulation Block
C241 Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C260 Standard Specification for Air-Entraining Admixtures for Concrete
C265 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
C266 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C267 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C270 Standard Specification for Mortar for Unit Masonry
C279 Standard Specification for Chemical-Resistant Masonry Units
C287 Standard Specification for Chemical-Resistant Sulfur Mortar
C288 Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
C293 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
C294 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
C295 Standard Guide for Petrographic Examination of Aggregates for Concrete
C296 Standard Specification for Asbestos-Cement Pressure Pipe
C301 Standard Test Methods for Vitrified Clay Pipe
C302 Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303 Standard Test Method for Dimensions and Density of Preformed Block and Broad-Type Thermal Insulation
C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
C311 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
C315 Standard Specification for Clay Flue Liners
C317/C317M Standard Specification for Gypsum Concrete
C318/C318M Standard Specification for Gypsum Formboard
C321 Standard Test Method for Bond Strength of Chemical-Resistant Mortars
C330 Standard Specification for Lightweight Aggregates for Structural Concrete
C331 Standard Specification for Lightweight Aggregates for Concrete Masonry Units
C332 Standard Specification for Lightweight Aggregates for Insulating Concrete
C335 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C341/C341M Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
C349 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
C351 Standard Test Method for Mean Specific Heat of Thermal Insulation
C356 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C357 Standard Test Method for Bulk Density of Granular Refractory Materials
C359 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
C361M Standard Specification for Reinforced Concrete Low-Head Pressure Pipe [Metric]
C361 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
C367 Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
C384 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
C386 Standard Practice for Use of Chemical-Resistant Sulfur Mortar
C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
C390 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C395 Standard Specification for Chemical-Resistant Resin Mortars
C397 Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C398 Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
C399 Standard Practice for Use of Chemical-Resistant Resin Mortars
C400 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
C401 Standard Classification of Alumina and Alumina-Silicate Castable Refractories
C403/C403M Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C404 Standard Specification for Aggregates for Masonry Grout
C406 Standard Specification for Roofing Slate
C410 Standard Specification for Industrial Floor Brick
C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C412 Standard Specification for Concrete Drain Tile
C412M Standard Specification for Concrete Drain Tile [Metric]
C413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C414 Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C416 Standard Classification of Silica Refractory Brick
C417 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C418 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
C419 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C421 Standard Test Method for Tumbling Friability of Preformed Block-Type Thermal Insulation
C423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C425 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
C426 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
C428 Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
C430 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
C441 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
C443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
C443M Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets [Metric]
C444M Standard Specification for Perforated Concrete Pipe [Metric]
C444 Standard Specification for Perforated Concrete Pipe
C447 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C449/C449M Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C450 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
C451 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C452 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
C454 Standard Practice for Disintegration of Carbon Refractories by Alkali
C455 Standard Classification of Chrome Brick, Chrome-Magnesia Brick, Magnesia-Chrome Brick, and Magnesia Brick
C456 Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
C457 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
C458 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
C459 Standard Test Methods for Asbestos-Cement Flat Products
C461 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
C465 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
C466 Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
C467 Standard Classification of Mullite Refractories
C469 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
C470/C470M Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
C471M Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products [Metric]
C472 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
C473 Standard Test Methods for Physical Testing of Gypsum Panel Products
C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
C475/C475M Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C476 Standard Specification for Grout for Masonry
C478 Standard Specification for Precast Reinforced Concrete Manhole Sections
C478M Standard Specification for Precast Reinforced Concrete Manhole Sections [Metric]
C479 Standard Specification for Vitrified Clay Liner Plates
C488 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C490 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
C492 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C494/C494M Standard Specification for Chemical Admixtures for Concrete
C495 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
C496/C496M Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
C497 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
C497M Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
C500 Standard Test Methods for Asbestos-Cement Pipe
C503 Standard Specification for Marble Dimension Stone
C505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
C505M Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
C506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C506M Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Metric]
C507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C507M Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric]
C508 Standard Specification for Asbestos-Cement Underdrain Pipe
C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C510 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C511 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C512 Standard Test Method for Creep of Concrete in Compression
C514 Standard Specification for Nails for the Application of Gypsum Board
C515 Standard Specification for Chemical-Resistant Ceramic Tower Packings
C516 Standard Specification for Vermiculite Loose Fill Thermal Insulation
C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C520 Standard Test Methods for Density of Granular Loose Fill Insulations
C522 Standard Test Method for Airflow Resistance of Acoustical Materials
C530 Standard Specification for Structural Clay Nonloadbearing Screen Tile
C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
C534 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C541 Standard Specification for Linings for Asbestos-Cement Pipe
C542 Standard Specification for Lock-Strip Gaskets
C544 Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
C545 Standard Classification of Zircon Refractories
C547 Standard Specification for Mineral Fiber Pipe Insulation
C549 Standard Specification for Perlite Loose Fill Insulation
C550 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
C551 Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
C552 Standard Specification for Cellular Glass Thermal Insulation
C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C563 Standard Test Method for Optimum SO3 in Hydraulic Cement Using 24-h Compressive Strength
C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
C567 Standard Test Method for Determining Density of Structural Lightweight Concrete
C568 Standard Specification for Limestone Dimension Stone
C577 Standard Test Method for Permeability of Refractories
C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
C579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C583 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C585 Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)
C586 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
C587 Standard Specification for Gypsum Veneer Plaster
C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C592 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
C595 Standard Specification for Blended Hydraulic Cements
C596 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
C597 Standard Test Method for Pulse Velocity Through Concrete
C602 Standard Specification for Agricultural Liming Materials
C603 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C604 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C607 Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
C615 Standard Specification for Granite Dimension Stone
C616 Standard Specification for Quartz-Based Dimension Stone
C617 Standard Practice for Capping Cylindrical Concrete Specimens
C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C621 Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C629 Standard Specification for Slate Dimension Stone
C631 Standard Specification for Bonding Compounds for Interior Gypsum Plastering
C634 Standard Terminology Relating to Environmental Acoustics
C635 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636/C636M Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
C637 Standard Specification for Aggregates for Radiation-Shielding Concrete
C638 Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete
C639 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C641 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
C642 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
C645 Standard Specification for Nonstructural Steel Framing Members
C647 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
C653 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
C654 Standard Specification for Porous Concrete Pipe
C654M Standard Specification for Porous Concrete Pipe [Metric]
C655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C655M Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric]
C656 Standard Specification for Structural Insulating Board, Calcium Silicate
C658 Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
C659 Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C663 Standard Specification for Asbestos-Cement Storm Drain Pipe
C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C666/C666M Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
C667 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
C668 Standard Specification for Asbestos-Cement Transmission Pipe
C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
C672/C672M Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
C673 Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants
C680 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
C681 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C684 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
C685/C685M Standard Specification for Concrete Made By Volumetric Batching and Continuous Mixing
C686 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
C687 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
C688 Standard Specification for Functional Additions for Use in Hydraulic Cements
C692 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C700 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
C702 Standard Practice for Reducing Samples of Aggregate to Testing Size
C704 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C706 Standard Specification for Limestone for Animal Feed Use
C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C712 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C716 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C717 Standard Termninology of Building Seals and Sealants
C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C722 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings
C723 Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile
C725 Standard Specification for Semidense Mineral Fiber Siding
C726 Standard Specification for Mineral Fiber Roof Insulation Board
C727 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
C728 Standard Specification for Perlite Thermal Insulation Board
C731 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C736 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
C737 Standard Specification for Limestone for Dusting of Coal Mines
C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
C740 Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
C744 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C745 Standard Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter
C746 Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
C754 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
C755 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
C764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
C765 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C767 Standard Test Method for Thermal Conductivity of Carbon Refractories
C771 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
C772 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C778 Standard Specification for Standard Sand
C779/C779M Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C782 Standard Test Method for Softness of Preformed Tape Sealants
C786 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
C792 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C793 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C795 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C796 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
C800 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
C802 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
C803/C803M Standard Test Method for Penetration Resistance of Hardened Concrete
C805 Standard Test Method for Rebound Number of Hardened Concrete
C806 Standard Test Method for Restrained Expansion of Expansive Cement Mortar
C807 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
C811 Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
C821 Standard Specification for Lime for Use with Pozzolans
C822 Standard Terminology Relating to Concrete Pipe and Related Products
C823 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
C825 Standard Specification for Precast Concrete Barriers
C827 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
C828 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
C830 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C831 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C832 Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
C834 Standard Specification for Latex Sealants
C835 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
C836 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
C840 Standard Specification for Application and Finishing of Gypsum Board
C841 Standard Specification for Installation of Interior Lathing and Furring
C842 Standard Specification for Application of Interior Gypsum Plaster
C843 Standard Specification for Application of Gypsum Veneer Plaster
C844 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C845 Standard Specification for Expansive Hydraulic Cement
C846 Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
C847 Standard Specification for Metal Lath
C856 Standard Practice for Petrographic Examination of Hardened Concrete
C857 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
C858 Standard Specification for Underground Precast Concrete Utility Structures
C860 Standard Practice for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C861 Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C862 Standard Practice for Preparing Refractory Concrete Specimens by Casting
C863 Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C865 Standard Practice for Firing Refractory Concrete Specimens
C868 Standard Test Method for Chemical Resistance of Protective Linings
C869 Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
C870 Standard Practice for Conditioning of Thermal Insulating Materials
C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C873 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
C874 Standard Practice for Rotary Slag Testing of Refractory Materials
C875 Standard Specification for Asbestos-Cement Conduit
C877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C877M Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections [Metric]
C878/C878M Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
C879 Standard Test Methods for Release Papers Used With Preformed Tape Sealants
C880 Standard Test Method for Flexural Strength of Dimension Stone
C881/C881M Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
C882 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
C884/C884M Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
C885 Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
C890 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
C891 Standard Practice for Installation of Underground Precast Concrete Utility Structures
C892 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
C896 Standard Terminology Relating to Clay Products
C897 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
C898 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
C899 Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials (COMMITTEE C-8 SUPPLEMENT TO E 380)
C900 Standard Test Method for Pullout Strength of Hardened Concrete
C901 Standard Specification for Prefabricated Masonry Panels
C902 Standard Specification for Pedestrian and Light Traffic Paving Brick
C903 Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning
C904 Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
C905 Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C907 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C908 Standard Test Method for Yield Strength of Preformed Tape Sealants
C909 Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C910 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C911 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
C913 Standard Specification for Precast Concrete Water and Wastewater Structures
C914 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C915 Standard Specification for Precast Reinforced Concrete Crib Wall Members
C916 Standard Specification for Adhesives for Duct Thermal Insulation
C917 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
C918 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
C919 Standard Practice for Use of Sealants in Acoustical Applications
C920 Standard Specification for Elastomeric Joint Sealants
C921 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes and Laterals
C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals [Metric]
C924 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
C924M Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
C926 Standard Specification for Application of Portland Cement-Based Plaster
C928 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
C929 Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
C930 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
C933 Standard Specification for Welded Wire Lath
C935 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast
C936 Standard Specification for Solid Concrete Interlocking Paving Units
C937 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
C938 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
C939 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
C940 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
C941 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
C942 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C943 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
C944 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
C945 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C946 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
C947 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
C948 Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
C950 Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C952 Standard Test Method for Bond Strength of Mortar to Masonry Units
C953 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C954 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
C956 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
C957 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
C961 Standard Test Method for Lap Shear Strength of Sealants
C963 Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C964 Standard Guide for Lock-Strip Gasket Glazing
C966 Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
C969 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C969M Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
C972 Standard Test Method for Compression-Recovery of Tape Sealant
C973 Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
C974 Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C975 Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C977 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
C979 Standard Specification for Pigments for Integrally Colored Concrete
C980 Standard Specification for Industrial Chimney Lining Brick
C981 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
C985 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C985M Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe [Metric]
C987 Standard Practice for Vapor Attack on Refractories for Furnace Superstructures
C989 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
C990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C990M Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants [Metric]
C991 Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
C995 Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone
C1002 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1005 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
C1006 Standard Test Method for Splitting Tensile Strength of Masonry Units
C1007 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
C1012 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1014 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
C1015 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C1016 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
C1017/C1017M Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
C1019 Standard Test Method for Sampling and Testing Grout
C1021 Standard Practice for Laboratories Engaged in the Testing of Building Sealants
C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
C1032 Standard Specification for Woven Wire Plaster Base
C1037 Standard Practice for Inspection of Underground Precast Concrete Utility Structures
C1038 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
C1040 Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
C1041 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
C1042 Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear
C1043 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1043 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1044 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1046 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C1054 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1055 Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
C1057 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
C1058 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1059 Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
C1060 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
C1067 Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
C1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
C1072 Standard Test Method for Measurement of Masonry Flexural Bond Strength
C1073 Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali
C1074 Standard Practice for Estimating Concrete Strength by the Maturity Method
C1077 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
C1080 Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
C1081 Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
C1082 Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill
C1083 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1084 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
C1086 Standard Specification for Glass Fiber Felt Thermal Insulation
C1087 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
C1089 Standard Specification for Spun Cast Prestressed Concrete Poles
C1090 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
C1091 Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
C1093 Standard Practice for Accreditation of Testing Agencies for Unit Masonry
C1094 Standard Guide for Flexible Removable Insulation Covers
C1096 Standard Test Method for Determination of Wood Fiber in Asbestos Cement
C1097 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
C1099 Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1101/C1101M Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
C1103 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C1103M Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
C1104/C1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1105 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
C1106 Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
C1107/C1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
C1113 Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C1114 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1116/C116M Standard Specification for Fiber-Reinforced Concrete
C1119 Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
C1120 Standard Test Method for Wash Test of Asbestos
C1121 Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
C1122 Standard Test Method for Wet Volume of Asbestos
C1123 Standard Test Method for Compressibility and Recovery of Asbestos
C1124 Standard Test Method for Kerosene Retention of Asbestos
C1125 Standard Test Method for Penetration Index of Asbestos
C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
C1127 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
C1129 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
C1130 Standard Practice for Calibrating Thin Heat Flux Transducers
C1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C1134 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
C1135 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
C1137 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
C1138M Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
C1139 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
C1140 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
C1141 Standard Specification for Admixtures for Shotcrete
C1142 Standard Specification for Extended Life Mortar for Unit Masonry
C1146 Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air
C1147 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
C1148 Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
C1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
C1152/C1152M Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
C1153 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
C1154 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
C1155 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
C1157 Standard Performance Specification for Hydraulic Cement
C1158 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
C1159 Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
C1160 Standard Specification for Chemical-Resistant Carbon Brick
C1161 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1162 Standard Test Method for Loose Density of Asbestos
C1164 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
C1166 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
C1167 Standard Specification for Clay Roof Tiles
C1170 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
C1171 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1176 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
C1177/C1177M Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
C1178/C1178M Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
C1180 Standard Terminology of Mortar and Grout for Unit Masonry
C1181 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
C1183 Standard Test Method for Extrusion Rate of Elastomeric Sealants
C1184 Standard Specification for Structural Silicone Sealants
C1185 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
C1186 Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets
C1190 Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1193 Standard Guide for Use of Joint Sealants
C1194 Standard Test Method for Compressive Strength of Architectural Cast Stone
C1195 Standard Test Method for Absorption of Architectural Cast Stone
C1196 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
C1197 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
C1198 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C1201 Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
C1208/C1208M Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
C1209 Standard Terminology of Concrete Masonry Units and Related Units
C1211 Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1214 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C1214M Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method [Metric]
C1216 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1218/C1218M Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
C1222 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
C1223 Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1224 Standard Specification for Reflective Insulation for Building Applications
C1225 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates
C1226 Standard Test Method for Soluble Chlorides in Asbestos
C1227 Standard Specification for Precast Concrete Septic Tanks
C1228 Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
C1229 Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
C1230 Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
C1231/C1231M Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
C1232 Standard Terminology of Masonry
C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures
C1241 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
C1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems
C1244 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1244M Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric]
C1245/C1245M Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)
C1246 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248 Standard Test Method for Staining of Porous Substrate by Joint Sealants
C1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1250 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
C1252 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
C1253 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1258 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
C1259 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
C1261 Standard Specification for Firebox Brick for Residential Fireplaces
C1262 Standard Test Method for Evaluating the Freeze-Thaw Durability of Manufactured Concrete Masonry Units and Related Concrete Units
C1263 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
C1264 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Board
C1265 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1266 Standard Test Method for Flow Characteristics of Preformed Tape Sealants
C1271 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
C1272 Standard Specification for Heavy Vehicular Paving Brick
C1273 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1276 Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
C1278/C1278M Standard Specification for Fiber-Reinforced Gypsum Panel
C1280 Standard Specification for Application of Gypsum Sheathing
C1281 Standard Specification for Preformed Tape Sealants for Glazing Applications
C1283 Standard Practice for Installing Clay Flue Lining
C1288 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
C1291 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
C1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
C1294 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1298 Standard Guide for the Design and Construction of Brick Liners for Industrial Chimneys
C1299 Standard Guide for Use in Selection of Liquid-Applied Sealants
C1301 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
C1302 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
C1303 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
C1304 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1305 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
C1306 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
C1311 Standard Specification for Solvent Release Sealants
C1312 Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
C1313 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
C1314 Standard Test Method for Compressive Strength of Masonry Prisms
C1315 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
C1318 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
C1319 Standard Specification for Concrete Grid Paving Units
C1320 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
C1321 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
C1324 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
C1325 Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cement Substrate Sheets
C1326 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1328 Standard Specification for Plastic (Stucco) Cement
C1329 Standard Specification for Mortar Cement
C1330 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
C1335 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C1338 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C1339 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
C1340 Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
C1352 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
C1353 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
C1354 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
C1355/C1355M Standard Specification for Glass Fiber Reinforced Gypsum Composites
C1356 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
C1357 Standard Test Methods for Evaluating Masonry Bond Strength
C1361 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1362 Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete
C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
C1364 Standard Specification for Architectural Cast Stone
C1365 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
C1366 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1367 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
C1368 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
C1369 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1370 Standard Test Method for Determining the Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C1372 Standard Specification for Dry-Cast Segmental Retaining Wall Units
C1373 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
C1374 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
C1375 Standard Guide for Substrates Used in Testing Building Seals and Sealants
C1381 Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
C1382 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1383 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
C1384 Standard Specification for Admixtures for Masonry Mortars
C1385/C1385M Standard Practice for Sampling Materials for Shotcrete
C1386 Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units
C1392 Standard Guide for Evaluating Failure of Structural Sealant Glazing
C1393 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
C1394 Standard Guide for In-Situ Structural Silicone Glazing Evaluation
C1396/C1396M Standard Specification for Gypsum Board
C1397 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
C1398 Standard Test Method for Laboratory Determination of the Time Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles
C1399 Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
C1400 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
C1401 Standard Guide for Structural Sealant Glazing
C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars
C1404/C1404M Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
C1405 Standard Specification for Glazed Brick (Single Fired, Brick Units)
C1407 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1409 Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
C1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
C1417M Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
C1419 Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
C1421 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
C1423 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
C1424 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
C1427 Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
C1433M Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric]
C1433 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
C1435/C1435M Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
C1436 Standard Specification for Materials for Shotcrete
C1437 Standard Test Method for Flow of Hydraulic Cement Mortar
C1438 Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar
C1439 Standard Test Methods for Polymer-Modified Mortar and Concrete
C1442 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1445 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
C1446 Standard Test Method for Measuring Consistency and Working Time of Self-Flowing Castable Refractories
C1447/C1447M Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
C1448/C1448M Standard Specification for Non-Asbestos Fiber-Cement Conduit
C1449/C1449M Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
C1450/C1450M Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
C1451 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source
C1452 Standard Specification for Reinforced Autoclaved Aerated Concrete Elements
C1459 Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
C1465 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
C1467/C1467M Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
C1471 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
C1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
C1478M Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric]
C1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
C1480 Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
C1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
C1483 Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
C1484 Standard Specification for Vacuum Insulation Panels
C1485 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
C1486 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
C1487 Standard Guide for Remedying Structural Silicone Glazing
C1488 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
C1489 Standard Specification for Lime Putty for Structural Purposes
C1491 Standard Specification for Concrete Roof Pavers
C1492 Standard Specification for Concrete Roof Tile
C1496 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
C1497 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
C1498 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
C1499 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains
C1504M Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains (Metric)
C1506 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
C1511 Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)
C1512 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
C1515 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
C1516 Standard Practice for Application of Direct-Applied Exterior Finish Systems
C1518 Standard Specification for Precured Elastomeric Silicone Joint Sealants
C1519 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1520 Standard Guide for Paintability of Latex Sealants
C1521 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1522 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
C1523 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
C1524 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
C1525 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
C1526 Standard Specification for Serpentine Dimension Stone
C1527 Standard Specification for Travertine Dimension Stone
C1528 Standard Guide for Selection of Dimension Stone for Exterior Use
C1529 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
C1530 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
C1531 Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index
C1532 Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
C1534 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
C1535 Standard Practice for Application of Exterior Insulation and Finish Systems Class PI
C1536 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
C1542/C1542M Standard Test Method for Measuring Length of Concrete Cores
C1543 Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding
C1546 Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
C1547 Standard Classification for Fusion-Cast Refractory Blocks and Shapes
C1548 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration
C1549 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
C1550 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
C1552 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
C1555 Standard Practice for Autoclaved Aerated Concrete Masonry
C1556 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
C1559 Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)
C1560 Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
C1564 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
C1565 Standard Test Method for Determination of Pack-Set Index of Portland Cement
C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
C1568 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
C1569 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
C1570 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles(Air Permeability Method)
C1574 Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
C1576 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
C1577 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C1579 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
C1580 Standard Test Method for Water-Soluble Sulfate in Soil
C1581 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
C1582/C1582M Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
C1583 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
C1585 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
C1586 Standard Guide for Quality Assurance of Mortars
C1587 Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Compressive Strength Testing
C1589 Standard Practice for Outdoor Weathering of Construction Seals and Sealants
C1591 Standard Test Method for Determination of the Modulus of Elasticity of AAC
C1594 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
C1597M Standard Specification for Gypsum Wallboard (Hard Metric Sizes)
C1601 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C1603 Standard Test Method for Measurement of Solids in Water
C1604/C1604M Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
C1608 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
C1609/C1609M Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
C1613 Standard Specification for Precast Concrete Grease Interceptor Tanks
C1616 Standard Test Method for Determining the Moisture Content of Inorganic Insulation Materials by Weight
C1617 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
C1618 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
C1618M Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure [Metric]
C1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures
C1620 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
C1622/C1622M Standard Specification for Cold-Weather Admixture Systems
C1623 Standard Specification for Manufactured Concrete Masonry Lintels
C1624 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
C1628 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
C1629/C1629M Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
C1630 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
C1631 Standard Specification for Cellular Polypropylene Thermal Insulation
C1634 Standard Specification for Concrete Facing Brick
C1635 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
C1644 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
C1645 Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
C1655 Standard Classification of Fireclay and High-Alumina Mortars
C1658/C1658M Standard Specification for Glass Mat Gypsum Panels

D4 Standard Test Method for Bitumen Content
D5 Standard Test Method for Penetration of Bituminous Materials
D6 Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
D8 Standard Terminology Relating to Materials for Roads and Pavements
D9 Standard Terminology Relating to Wood and Wood-Based Products
D20 Standard Test Method for Distillation of Road Tars
D25 Standard Specification for Round Timber Piles
D36 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
D41 Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
D43 Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
D70 Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
D75 Standard Practice for Sampling Aggregates
D88 Standard Test Method for Saybolt Viscosity
D98 Standard Specification for Calcium Chloride
D113 Standard Test Method for Ductility of Bituminous Materials
D139 Standard Test Method for Float Test for Bituminous Materials
D140 Standard Practice for Sampling Bituminous Materials
D143 Standard Test Methods for Small Clear Specimens of Timber
D146 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
D173 Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes
D225 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
D226 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
D227 Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
D228 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
D242 Standard Specification for Mineral Filler For Bituminous Paving Mixtures
D243 Standard Test Method for Residue of Specified Penetration
D244 Standard Test Methods and Practices for Emulsified Asphalts
D245 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
D299 Standard Specification for Asbestos Yarns
D312 Standard Specification for Asphalt Used in Roofing
D315 Standard Specification for Woven Asbestos Tape
D345 Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
D375 Standard Specification for Asbestos Roving
D402 Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products
D420 Standard Guide to Site Characterization for Engineering, Design, and Construction Purposes
D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D422 Standard Test Method for Particle-Size Analysis of Soils
D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils
D427 Test Method for Shrinkage Factors of Soils by the Mercury Method
D448 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
D449 Standard Specification for Asphalt Used in Dampproofing and Waterproofing
D450 Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
D451 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
D452 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
D490 Standard Specification for Road Tar
D517 Standard Specification for Asphalt Plank
D529 Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
D545 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
D559 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
D560 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
D628 Standard Specification for Asbestos Tubular Sleeving
D632 Standard Specification for Sodium Chloride
D633 Standard Volume Correction Table for Road Tar
D653 Standard Termninology Relating to Soil, Rock, and Contained Fluids
D692 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
D693 Standard Specification for Crushed Aggregate for Macadam Pavements
D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
D806 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
D946 Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
D977 Standard Specification for Emulsified Asphalt
D979 Standard Practice for Sampling Bituminous Paving Mixtures
D994 Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
D995 Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
D1036 Standard Test Methods of Static Tests of Wood Poles
D1037 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
D1038 Standard Terminology Relating to Veneer and Plywood
D1061 Standard Specification for Asbestos Lap
D1073 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures
D1074 Standard Test Method for Compressive Strength of Bituminous Mixtures
D1075 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
D1079 Terminology Relating to Roofing and Waterproofing
D1102 Standard Test Method for Ash in Wood
D1105 Standard Test Method for Preparation of Extractive-Free Wood
D1106 Standard Test Method for Acid-Insoluble Lignin in Wood
D1107 Standard Test Method for Ethanol-Toluene Solubility of Wood
D1108 Standard Test Method for Dichloromethane Solubles in Wood
D1109 Standard Test Method for 1% Sodium Hydroxide Solubility of Wood
D1110 Standard Test Methods for Water Solubility of Wood
D1118 Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
D1139 Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-m) Sieve
D1165 Standard Nonmenclature of Domestic Hardwoods and Softwoods
D1166 Standard Test Method for Methoxyl Groups in Wood and Related Materials
D1187 Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
D1188 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
D1195 Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
D1196 Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
D1227 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
D1327 Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
D1369 Standard Practice for Quantities of Materials for Bituminous Surface Treatments
D1370 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
D1411 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes
D1413 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
D1452 Standard Practice for Soil Investigation and Sampling by Auger Borings
D1461 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
D1554 Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials
D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3(2,700 kN-m/m3))
D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
D1560 Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
D1561 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
D1571 Standard Specification for Woven Asbestos Cloth
D1573 Standard Test Method for Heat Aging of Asbestos Textiles
D1586 Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils
D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
D1632 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
D1633 Standard Test Method for Compressive Strength of Molded Soil-Cement Cylinders
D1634 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
D1635 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
D1665 Standard Test Method for Engler Specific Viscosity of Tar Products
D1666 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials
D1668 Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing
D1669 Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
D1670 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
D1751 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
D1752 Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
D1754 Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
D1758 Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes
D1761 Standard Test Methods for Mechanical Fasteners in Wood
D1762 Standard Test Method for Chemical Analysis of Wood Charcoal
D1856 Standard Test Method for Recovery of Asphalt From Solution by Abson Method
D1863 Standard Specification for Mineral Aggregate Used on Built-Up Roofs
D1864 Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
D1865 Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
D1918 Standard Test Method for Asbestos Content of Asbestos Textiles
D1970 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
D1985 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
D1987 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
D1990 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
D1997 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
D2017 Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods
D2026 Standard Specification for Cutback Asphalt (Slow-Curing Type)
D2027 Standard Specification for Cutback Asphalt (Medium-Curing Type)
D2028 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
D2041 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
D2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
D2100 Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes
D2113 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
D2170 Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
D2171 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
D2172 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
D2178 Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
D2202 Standard Test Method for Slump of Sealants
D2203 Standard Test Method for Staining from Sealants
D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
D2217 Standard Practice for Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D2278 Standard Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens
D2325 Standard Test Method for Capillary-Moisture Relationships for Coarse- and Medium-Textured Soils by Porous-Plate Apparatus
D2377 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
D2394 Standard Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
D2395 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
D2397 Standard Specification for Cationic Emulsified Asphalt
D2399 Standard Practice for Selection of Cutback Asphalts
D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
D2434 Standard Test Method for Permeability of Granular Soils (Constant Head)
D2435 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
D2452 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
D2453 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
D2481 Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens
D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
D2489 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
D2493 Standard Viscosity-Temperature Chart for Asphalts
D2521 Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining
D2523 Standard Practice for Testing Load-Strain Properties of Roofing Membranes
D2555 Standard Practice for Establishing Clear Wood Strength Values
D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil
D2589 Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
D2590 Standard Test Method for Sampling Chrysotile Asbestos
D2626 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
D2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
D2643 Standard Specification for Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)
D2718 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
D2719 Standard Test Methods for Structural Panels in Shear Through-the-Thickness
D2726 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
D2728 Standard Practice for Paving Uses and Application Temperatures for Road Tars
D2746 Standard Test Method for Staining Tendency of Asphalt (Stain Index)
D2752 Standard Test Methods for Air Permeability of Asbestos Fibers
D2822 Standard Specification for Asphalt Roof Cement
D2823 Standard Specification for Asphalt Roof Coatings
D2824 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos
D2829 Standard Practice for Sampling and Analysis of Built-Up Roofs
D2835 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
D2844 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
D2850 Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
D2859 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
D2898 Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
D2899 Standard Practice for Establishing Allowable Stresses for Round Timber Piles
D2915 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
D2922 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
D2939 Standard Test Methods for Emulsified Bitumens Used as Protective Coatings
D2940 Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
D2944 Standard Test Method of Sampling Processed Peat Materials
D2946 Standard Terminology for Asbestos and Asbestos-Cement Products
D2947 Standard Test Method for Screen Analysis of Asbestos Fibers
D2950 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
D2973 Standard Test Method for Total Nitrogen in Peat Materials
D2974 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
D2976 Standard Test Method for pH of Peat Materials
D2977 Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
D2978 Standard Test Method for Volume of Processed Peat Materials
D2980 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
D2985 Standard Test Method for Color of Asbestos
D2987 Standard Test Method for Moisture Content of Asbestos Fiber
D2995 Standard Practice for Estimating Application Rate of Bituminous Distributors
D3017 Standard Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth)
D3018 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
D3019 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non Fibered, Asbestos Fibered, and Non Asbestos Fibered
D3042 Standard Test Method for Insoluble Residue in Carbonate Aggregates
D3043 Standard Test Methods for Structural Panels in Flexure
D3044 Standard Test Method for Shear Modulus of Wood-Based Structural Panels
D3080 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
D3105 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
D3141 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
D3142 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
D3152 Standard Test Method for Capillary-Moisture Relationships for Fine-Textured Soils by Pressure-Membrane Apparatus
D3155 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
D3161 Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method
D3200 Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
D3201 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Base Products
D3202 Standard Practice for Preparation of Bituminous Mixture Beam Specimens by Means of the California Kneading Compactor
D3203 Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
D3213 Standard Practices for Handling, Storing, and Preparing Soft Undisturbed Marine Soil
D3279 Standard Test Method for n-Heptane Insolubles
D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
D3289 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
D3319 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
D3320 Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)
D3345 Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
D3381 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
D3387 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
D3398 Standard Test Method for Index of Aggregate Particle Shape and Texture
D3404 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
D3406 Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
D3409 Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
D3423 Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
D3441 Standard Test Method for Mechanical Cone Penetration Tests of Soil
D3462 Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
D3468 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
D3496 Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
D3497 Standard Test Method for Dynamic Modulus of Asphalt Mixtures
D3499 Standard Test Method for Toughness of Wood-Based Structural Panels
D3500 Standard Test Methods for Structural Panels in Tension
D3501 Standard Test Methods for Wood-Based Structural Panels in Compression
D3507 Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood
D3515 Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
D3542 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
D3549 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
D3551 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer
D3617 Standard Practice for Sampling and Analysis of New Built-Up Roof Membranes
D3625 Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
D3628 Standard Practice for Selection and Use of Emulsified Asphalts
D3633 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
D3639 Standard Test Method for Classification of Asbestos by Quebec Standard Test
D3665 Standard Practice for Random Sampling of Construction Materials
D3666 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
D3737 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
D3740 Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
D3744 Standard Test Method for Aggregate Durability Index
D3745 Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)
D3746 Standard Test Method for Impact Resistance of Bituminous Roofing Systems
D3747 Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation
D3752 Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix
D3791 Standard Practice for Evaluating the Effects of Heat on Asphalts
D3805 Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
D3877 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures
D3879 Standard Test Method for Sampling Amphibole Asbestos
D3880 Standard Test Method for Asbestos Strength Units
D3909 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
D3910 Standard Practices for Design, Testing, and Construction of Slurry Seal
D3957 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
D3963/D3963M Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
D3999 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
D4013 Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
D4014 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
D4015 Standard Test Methods for Modulus and Damping of Soils by the Resonant-Column Method
D4016 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
D4022 Standard Specification for Coal Tar Roof Cement, Asbestos Containing
D4043 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
D4044 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifiers
D4050 Standard Test Method (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems
D4064 Standard Practice for Preservative Treatment of Utility Poles by the Thermal Process
D4071 Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
D4073 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
D4074 Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
D4083 Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
D4104 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
D4105 Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
D4106 Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
D4124 Standard Test Methods for Separation of Asphalt into Four Fractions
D4125 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
D4186 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
D4215 Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
D4219 Standard Test Method for Unconfined Compressive Strength Index of Chemical-Grouted Soils
D4220 Standard Practices for Preserving and Transporting Soil Samples
D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
D4223 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4280 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
D4311 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
D4319 Standard Test Method for Distribution Ratios by the Short-Term Batch Method
D4320 Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters
D4354 Standard Practice for Sampling of Geosynthetics for Testing
D4355 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
D4373 Standard Test Method for Rapid Determination of Carbonate Content of Soils
D4380 Standard Test Method for Density of Bentonitic Slurries
D4381 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
D4383 Standard Specification for Plowable, Raised Retroreflective Pavement Markers
D4394 Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Rigid Plate Loading Method
D4395 Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Flexible Plate Loading Method
D4402 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
D4403 Standard Practice for Extensometers Used in Rock
D4404 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
D4427 Standard Classification of Peat Samples by Laboratory Testing
D4428/D4428M Standard Test Methods for Crosshole Seismic Testing
D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
D4434 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
D4435 Standard Test Method for Rock Bolt Anchor Pull Test
D4436 Standard Test Method for Rock Bolt Long-Term Load Retention Test
D4437 Standard Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet Geomembranes
D4439 Standard Terminology for Geosynthetics
D4442 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
D4444 Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
D4445 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
D4452 Standard Practice for X-Ray Radiography of Soil Samples
D4460 Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
D4469 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture
D4479 Standard Specification for Asphalt Roof Coatings - Asbestos-Free
D4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
D4505 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
D4506 Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using a Radial Jacking Test
D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
D4525 Standard Test Method for Permeability of Rocks by Flowing Air
D4531 Standard Test Methods for Bulk Density of Peat and Peat Products
D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
D4535 Standard Test Methods for Measurement of Thermal Expansion of Rock Using a Dilatometer
D4542 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
D4543 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
D4544 Standard Practice for Estimating Peat Deposit Thickness
D4545 Standard Practice for Determining the Integrity of Factory Seams Used in Joining Manufactured Flexible Sheet Geomembranes
D4546 Standard Test Methods for One-Dimensional Swell or Settlement Potential of Cohesive Soils
D4552 Standard Practice for Classifying Hot-Mix Recycling Agents
D4553 Standard Test Method for Determining In Situ Creep Characteristics of Rock
D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
D4561 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
D4564 Standard Test Method for Density of Soil in Place by the Sleeve Method
D4580 Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
D4586 Standard Specification for Asphalt Roof Cement, Asbestos-Free
D4592 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
D4594 Standard Test Method for Effects of Temperature on Stability of Geotextiles
D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
D4601 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
D4602 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
D4609 Standard Guide for Evaluating Effectiveness of Chemicals for Soil Stabilization
D4611 Standard Test Method for Specific Heat of Rock and Soil
D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks
D4623 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method-USBM Borehole Deformation Gage
D4630 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
D4631 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
D4632 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
D4633 Standard Test Method for Energy Measurement for Dynamic Penetrometers
D4637 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Microwave Oven Method
D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
D4645 Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method
D4647 Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
D4648 Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
D4694 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
D4695 Standard Guide for General Pavement Deflection Measurements
D4696 Standard Guide for Pore-Liquid Sampling from the Vadose Zone
D4700 Standard Guide for Soil Sampling from the Vadose Zone
D4716 Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
D4719 Standard Test Method for Prebored Pressuremeter Testing in Soils
D4729 Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flatjack Method
D4748 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
D4750 Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)
D4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile
D4753 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
D4759 Standard Practice for Determining the Specification Conformance of Geosynthetics
D4761 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
D4788 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
D4791 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
D4792 Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
D4798 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
D4799 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
D4811 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
D4829 Standard Test Method for Expansion Index of Soils
D4830 Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
D4832 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
D4833 Standard Test Method for Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products
D4866 Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures
D4867/D4867M Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
D4869 Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
D4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
D4879 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock
D4884 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
D4885 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
D4886 Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
D4887 Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
D4897 Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
D4914 Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
D4932 Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles
D4933 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
D4945 Standard Test Method for High-Strain Dynamic Testing of Piles
D4956 Standard Specification for Retroreflective Sheeting for Traffic Control
D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
D4971 Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Using the Diametrically Loaded 76-mm (3-in.) Borehole Jack
D4972 Standard Test Method for pH of Soils
D4977 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
D4989 Standard Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
D4990 Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
D4992 Standard Practice for Evaluation of Rock to be Used for Erosion Control
D5019 Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
D5030 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
D5036 Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing
D5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
D5076 Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
D5078 Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
D5079 Standard Practices for Preserving and Transporting Rock Core Samples
D5080 Standard Test Method for Rapid Determination of Percent Compaction
D5081 Standard Test Method for Aggregate Layer Hiding Power
D5082 Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing
D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
D5088 Standard Practice for Decontamination of Field Equipment Used at Nonradioactive Waste Sites
D5092 Standard Practice for Design and Installation of Ground Water Monitoring Wells
D5093 Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
D5100 Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen
D5101 Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
D5102 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
D5106 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
D5121 Standard Practice for Preparation of Rock Slabs for Durability Testing
D5124 Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
D5126 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in the Vadose Zone
D5141 Standard Test Method for Determining Filtering Efficiency and Flow Rate of a Geotextile for Silt Fence Application Using Site-Specific Soil
D5143 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
D5147 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
D5148 Standard Test Method for Centrifuge Kerosine Equivalent
D5167 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods
D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
D5202 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
D5220 Standard Test Method for Water Content of Soil and Rock In-Place by the Neutron Depth Probe Method
D5239 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization
D5240 Standard Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate
D5249 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
D5254 Standard Practice for Minimum Set of Data Elements to Identify a Ground-Water Site
D5255 Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
D5261 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
D5262 Standard Test Method for Evaluating the Unconfined Tension Creep Rupture Behavior of Geosynthetics
D5268 Standard Specification for Topsoil Used for Landscaping Purposes
D5269 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
D5270 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
D5295 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
D5299 Standard Guide for Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
D5312 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
D5313 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
D5314 Standard Guide for Soil Gas Monitoring in the Vadose Zone
D5321 Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
D5322 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
D5323 Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes
D5329 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
D5333 Standard Test Method for Measurement of Collapse Potential of Soils
D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
D5340 Standard Test Method for Airport Pavement Condition Index Surveys
D5360 Standard Practice for Design and Construction of Bituminous Surface Treatments
D5361 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
D5385 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
D5397 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
D5404 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
D5405 Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
D5408 Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part One-Additional Identification Descriptors
D5409 Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Two-Physical Descriptors
D5410 Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Three-Usage Descriptors
D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
D5435 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection
D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
D5447 Standard Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem
D5456 Standard Specification for Evaluation of Structural Composite Lumber Products
D5457 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
D5469 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
D5472 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
D5473 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
D5474 Standard Guide for Selection of Data Elements for Ground-Water Investigations
D5490 Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information
D5493 Standard Test Method for Permittivity of Geotextiles Under Load
D5494 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
D5496 Standard Practice for In Field Immersion Testing of Geosynthetics
D5505 Standard Practice for Classifying Emulsified Recycling Agents
D5506 Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials
D5514 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
D5516 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
D5519 Standard Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials
D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
D5521 Standard Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers
D5535 Standard Terminology Relating to Formed-in-Place Sealants for Joints and Cracks in Pavements
D5536 Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties
D5539 Standard Specification for Seed Starter Mix
D5546 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
D5581 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
D5582 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator
D5583 Standard Test Method for Detection and Estimation of Retention of Wood Preservatives by Aspergillus Bioassaying
D5596 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
D5602 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
D5608 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
D5609 Standard Guide for Defining Boundary Conditions in Ground-Water Flow Modeling
D5610 Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
D5611 Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application
D5617 Standard Test Method for Multi-Axial Tension Test for Geosynthetics
D5624 Standard Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications
D5635 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
D5636 Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
D5641 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
D5643 Standard Specification for Coal Tar Roof Cement, Asbestos Free
D5651 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
D5652 Standard Test Methods for Bolted Connections in Wood and Wood-Base Products
D5664 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
D5665 Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
D5683 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
D5710 Standard Specification for Trinidad Lake Modified Asphalt
D5711 Standard Test Method for Determining the Adherent Coating on Coarse Aggregates
D5714 Standard Specification for Content of Digital Geospatial Metadata
D5715 Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
D5716 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
D5718 Standard Guide for Documenting a Ground-Water Flow Model Application
D5719 Standard Guide for Simulation of Subsurface Airflow Using Ground-Water Flow Modeling Codes
D5720 Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes
D5721 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes
D5726 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
D5727 Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
D5730 Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Ground Water
D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock
D5737 Standard Guide for Methods for Measuring Well Discharge
D5738 Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements—Diagrams for Single Analyses
D5747 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
D5753 Standard Guide for Planning and Conducting Borehole Geophysical Logging
D5754 Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Trilinear Diagrams for Two or More Analyses
D5764 Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Base Products
D5777 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
D5778 Standard Test Method for Performing Electronic Friction Cone and Piezocone Penetration Testing of Soils
D5779 Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control
D5780 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
D5781 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5782 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5783 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5784 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5785 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
D5786 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
D5787 Standard Practice for Monitoring Well Protection
D5801 Standard Test Method for Toughness and Tenacity of Bituminous Materials
D5818 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics
D5819 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
D5820 Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes
D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
D5843 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing
D5849 Standard Test Method for Evaluating Resistance of Modified, Bituminous Roofing Membranes to Cyclic Joint Displacement
D5850 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
D5855 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
D5858 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
D5869 Standard Practice for Dark Oven Heat Exposure of Bituminous Materials
D5872 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5873 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil
D5875 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5876 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5877 Standard Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams Based on Data Analytical Calculations
D5878 Standard Guide for Using Rock Mass Classification Systems for Engineering Purposes
D5879 Standard Practice for Surface Site Characterization for On-Site Septic Systems
D5880 Standard Guide for Subsurface Flow and Transport Modeling
D5881 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
D5882 Standard Test Method for Low Strain Integrity Testing of Piles
D5883 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
D5884 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
D5885 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
D5886 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
D5887 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
D5888 Standard Guide for Storage and Handling of Geosynthetic Clay Liners
D5889 Standard Practice for Quality Control of Geosynthetic Clay Liners
D5890 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
D5891 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
D5893 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
D5898 Standard Guide for Standard Details for Adhered Sheet Waterproofing
D5903 Standard Guide for Planning and Preparing for a Groundwater Sampling Event
D5911 Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site
D5912 Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
D5920 Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method
D5921 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
D5922 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
D5923 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
D5924 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
D5933 Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions
D5957 Standard Guide for Flood Testing Horizontal Waterproofing Installations
D5970 Standard Practice for Deterioration of Geotextiles from Outdoor Exposure
D5971 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
D5973 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
D5977 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
D5978 Standard Guide for Maintenance and Rehabilitation of Ground-Water Monitoring Wells
D5979 Standard Guide for Conceptualization and Characterization of Ground-Water Systems
D5980 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
D5981 Standard Guide for Calibrating a Ground-Water Flow Model Application
D5982 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
D5993 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners
D5994 Standard Test Method for Measuring Core Thickness of Textured Geomembrane
D5995 Standard Guide for Environmental Site Characterization in Cold Regions
D6000 Standard Guide for Presentation of Water-Level Information From Ground-Water Sites
D6001 Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations
D6007 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
D6023 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
D6024 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
D6025 Standard Guide for Developing and Evaluating Ground-Water Modeling Codes
D6026 Standard Practice for Using Significant Digits in Geotechnical Data
D6027 Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes
D6028 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
D6029 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
D6030 Standard Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitiviy and Vulnerability
D6031 Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
D6033 Standard Guide for Describing the Functionality of a Ground-Water Modeling Code
D6034 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
D6035 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Undisturbed Soil Specimens Using a Flexible Wall Permeameter
D6036 Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements—Use of Maps
D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
D6067 Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization
D6072 Standard Guide for Obtaining Samples of Geosynthetic Clay Liners
D6083 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
D6084 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
D6087 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
D6088 Standard Practice for Installation of Geocomposite Pavement Drains
D6089 Standard Guide for Documenting a Ground-Water Sampling Event
D6092 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control
D6102 Standard Guide for Installation of Geosynthetic Clay Liners
D6103 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
D6106 Standard Guide for Establishing the Nomenclature of Ground-Water Aquifers
D6114 Standard Specification for Asphalt-Rubber Binder
D6128 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
D6134 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
D6135 Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing
D6136 Standard Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method
D6140 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
D6141 Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
D6152 Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
D6153 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems
D6154 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
D6155 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
D6162 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
D6163 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
D6164 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
D6167 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
D6168 Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
D6169 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
D6170 Standard Guide for Selecting a Ground-Water Modeling Code
D6171 Standard Guide for Documenting a Ground-Water Modeling Code
D6187 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
D6213 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
D6214 Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
D6221 Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing
D6222 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
D6223 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
D6225 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
D6230 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
D6235 Standard Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites
D6236 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil
D6241 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
D6243 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
D6244 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
D6249 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
D6274 Standard Guide for Conducting Borehole Geophysical Logging-Gamma
D6276 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
D6282 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
D6285 Standard Guide for Locating Abandoned Wells
D6286 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
D6294 Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing
D6297 Standard Specification for Asphaltic Plug Joints for Bridges
D6298 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
D6305 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
D6307 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
D6312 Standard Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs
D6356 Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
D6364 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
D6365 Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test
D6369 Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes
D6372 Standard Practice for Design, Testing, and Construction of Micro-Surfacing
D6373 Standard Specification for Performance Graded Asphalt Binder
D6380 Standard Specification for Asphalt Roll Roofing (Organic Felt)
D6381 Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance
D6382 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
D6383 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
D6388 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
D6389 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
D6390 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
D6392 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
D6393 Standard Test Method for Bulk Solids Characterization by Carr Indices
D6429 Standard Guide for Selecting Surface Geophysical Methods
D6430 Standard Guide for Using the Gravity Method for Subsurface Investigation
D6431 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
D6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
D6433 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
D6434 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
D6449 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
D6451 Standard Guide for Application of Asphalt Based Protection Board
D6452 Standard Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations
D6453 Standard Guide for Format of Computerized Exchange of Soil and Rock Test Data
D6454 Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
D6455 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
D6459 Standard Test Method for Determination of Erosion Control Blanket (ECB) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
D6460 Standard Test Method for Determination of Erosion Control Blanket (ECB) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D6461 Standard Specification for Silt Fence Materials
D6462 Standard Practice for Silt Fence Installation
D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
D6473 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control
D6475 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
D6495 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
D6496 Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
D6497 Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
D6506 Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing
D6509 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
D6510 Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems
D6511 Standard Test Methods for Solvent Bearing Bituminous Compounds
D6513 Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Endurance Tests
D6517 Standard Guide for Field Preservation of Ground-Water Samples
D6519 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
D6521 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
D6523 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
D6524 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
D6525 Standard Test Method for Measuring Nominal Thickness of Permanent Rolled Erosion Control Products
D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
D6539 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air
D6555 Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies
D6564 Standard Guide for Field Filtration of Ground-Water Samples
D6565 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method
D6566 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
D6567 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
D6570 Standard Practice for Assigning Allowable Properties for Mechanically-Graded Lumber
D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
D6574 Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
D6575 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
D6598 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
D6599 Standard Practice for Construction of Live Fascines on Slopes
D6607 Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
D6608 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
D6622 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
D6626 Standard Specification for Graded Trinidad Lake Modified Asphalt Binder
D6627 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
D6628 Standard Specification for Color of Pavement Marking Materials
D6629 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion
D6630 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
D6634 Standard Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells
D6635 Standard Test Method for Performing the Flat Plate Dilatometer
D6636 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
D6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
D6638 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
D6639 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
D6642 Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
D6643 Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
D6648 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
D6682 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
D6683 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids
D6684 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
D6685 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete
D6690 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
D6694 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing
D6703 Standard Test Method for Automated Heithaus Titrimetry
D6704 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
D6705 Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems
D6706 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
D6707 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
D6711 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
D6723 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
D6724 Standard Guide for Installation of Direct Push Ground Water Monitoring Wells
D6725 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
D6726 Standard Guide for Conducting Borehole Geophysical Logging-Electromagnetic Induction
D6727 Standard Guide for Conducting Borehole Geophysical Logging-Neutron
D6747 Standard Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembrane
D6752 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
D6753 Standard Specification for Coal Tar Adhesive
D6754 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
D6757 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method
D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
D6765 Standard Practice for Live Staking
D6766 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
D6767 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
D6768 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
D6769 Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
D6771 Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations
D6773 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester
D6780 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
D6782 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
D6805 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions
D6815 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
D6816 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
D6817 Standard Specification for Rigid Cellular Polystyrene Geofoam
D6818 Standard Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats
D6820 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation
D6825 Standard Guide for Placement of Riprap Revetments
D6826 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
D6841 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
D6847 Standard Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
D6848 Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing
D6857 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
D6874 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
D6878 Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
D6884 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
D6910 Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
D6911 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
D6914 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
D6916 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
D6917 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
D6918 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
D6924 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
D6925 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
D6926 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
D6927 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
D6928 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
D6929 Standard Practice for Freezing of Emulsified Asphalts
D6930 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts
D6932 Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
D6933 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
D6934 Standard Test Method for Residue by Evaporation of Emulsified Asphalt
D6935 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
D6936 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
D6937 Standard Test Method for Determining Density of Emulsified Asphalt
D6938 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
D6939 Standard Practice for Brushmattressing
D6940 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
D6941 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
D6945 Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)
D6946 Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)
D6947 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
D6948 Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)
D6950 Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
D6951 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
D6958 Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
D6992 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
D6995 Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
D6997 Standard Test Method for Distillation of Emulsified Asphalt
D6998 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
D6999 Standard Practice for Miscibility of Emulsified Asphalts
D7000 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
D7001 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
D7002 Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System
D7003 Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
D7004 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
D7005 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
D7006 Standard Practice for Ultrasonic Testing of Geomembranes
D7007 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials
D7008 Standard Specification for Geosynthetic Alternate Daily Covers
D7012 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
D7013 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup
D7014 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
D7015 Standard Practices for Obtaining Undisturbed Block (Cubical and Cylindrical) Samples of Soils
D7031 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
D7032 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)
D7033 Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
D7045 Standard Guide for Optimization of Ground Water Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Investigation
D7047 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifier
D7048 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
D7051 Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
D7056 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
D7063 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
D7064 Standard Practice for Open-Graded Friction Course (OGFC) Mix Design
D7067 Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane
D7069 Standard Guide for Field Quality Assurance in a Ground-water Sampling Event
D7070 Standard Test Method for Creep of Rock Core Under Constant Stress and Temperature
D7099 Standard Terminology Relating to Frozen Soil and Rock
D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
D7105 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
D7106 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
D7113 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
D7115 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
D7116 Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
D7128 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
D7147 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
D7158 Standard Test Method for Wind Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method)
D7172 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
D7174 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
D7175 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
D7176 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
D7177 Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes
D7178 Standard Practice for Determining the Number of Constrictions m of Non-Woven Geotextiles as a Complementary Filtration Property
D7179 Standard Test Method for Determining Geonet Breaking Force
D7180 Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
D7186 Standard Practice for Quality Assurance Observation of Roof Construction and Repair
D7196 Standard Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples
D7199 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models
D7207 Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions
D7208 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels form Stormwater-Induced Erosion
D7226 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
D7227 Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus
D7228 Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
D7229 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
D7238 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
D7242 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Ground Water Samplers
D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
D7272 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods
D7274 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
D7275 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)
D7299 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain

E69 Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
E72 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
E73 Standard Practice for Static Load Testing of Truss Assemblies
E84 Standard Test Method for Surface Burning Characteristics of Building Materials
E90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
E96/E96M Standard Test Methods for Water Vapor Transmission of Materials
E102 Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
E119 Standard Test Methods for Fire Tests of Building Construction and Materials
E136 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750oC
E154 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
E176 Standard Terminology of Fire Standards
E196 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
E241 Standard Guide for Limiting Water-Induced Damage to Buildings
E274 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E303 Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
E329 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
E330 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
E336 Standard Test Method for Measurement of Airborne Sound Insulation in Buildings
E405 Standard Test Methods for Wear Testing Rotary Operators for Windows
E413 Classification for Rating Sound Insulation
E445/E445M Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
E455 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
E477 Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
E488 Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements
E492 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
E497 Standard Practice for Installing Sound-Isolating Lightweight Partitions
E501 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
E503/E503M Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique
E514 Standard Test Method for Water Penetration and Leakage Through Masonry
E518 Standard Test Methods for Flexural Bond Strength of Masonry
E519 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
E524 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
E529 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
E535 Standard Practice for Preparation of Fire-Test-Response Standards
E541 Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
E546 Standard Test Method for Frost Point of Sealed Insulating Glass Units
E547 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
E556 Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
E557 Standard Guide for The Installation of Operable Partitions
E564 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
E575 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
E576 Standard Test Method for Frost Point of Sealed Insulating Glass Units in the Vertical Position
E577 Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems
E580/E580M Standard Practice for Application of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Requiring Seismic Restraint
E596 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
E603 Standard Guide for Room Fire Experiments
E605 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E621 Standard Practice for the Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380)
E631 Standard Terminology of Building Constructions
E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
E651/E651M Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
E660 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
E661 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
E670 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter
E695 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
E699 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
E713 Standard Guide for Selection of Scales for Metric Building Drawings
E717 Standard Guide for Preparation of the Accreditation Annex of Acoustical Test Standards
E736 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
E741 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
E754 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
E756 Standard Test Method for Measuring Vibration-Damping Properties of Materials
E759 Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
E760 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
E761 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
E773 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
E779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
E783 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
E795 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
E800 Standard Guide for Measurement of Gases Present or Generated During Fires
E814 Standard Test Method for Fire Tests of Through-Penetration Fire Stops
E833 Standard Terminology of Building Economics
E835/E835M Standard Guide for Modular Coordination of Clay and Concrete Masonry Units
E859 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
E864 Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels
E865 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
E866 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E867 Standard Terminology Relating to Vehicle-Pavement Systems
E874 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E894 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
E906 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
E907 Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
E917 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
E935 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
E936 Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
E937 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E950 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
E964 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
E965 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
E966 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
E985 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
E987 Standard Test Methods for Deglazing Force of Fenestration Products
E989 Standard Classification for Determination of Impact Insulation Class (IIC)
E990 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels
E997 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
E998 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
E1007 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
E1014 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
E1042 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
E1050 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
E1057 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
E1074 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
E1082 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
E1091 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
E1105 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
E1110 Standard Classification for Determination of Articulation Class
E1111 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
E1121 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
E1123 Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
E1124 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
E1130 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index
E1155 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
E1155M Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]
E1166 Standard Guide for Network Level Pavement Management
E1170 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
E1179 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
E1185 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
E1186 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
E1190 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
E1215 Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
E1222 Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
E1233 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
E1258 Standard Test Method for Airflow Calibration of Fan Pressurization Devices
E1264 Standard Classification for Acoustical Ceiling Products
E1265 Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
E1274 Standard Test Method for Measuring Pavement Roughness Using a Profilograph
E1289 Standard Specification for Reference Specimen for Sound Transmission Loss
E1300 Standard Practice for Determining Load Resistance of Glass in Buildings
E1307 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
E1317 Standard Test Method for Flammability of Marine Surface Finishes
E1318 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods
E1321 Standard Test Method for Determining Material Ignition and Flame Spread Properties
E1332 Standard Classification for Determination of Outdoor-Indoor Transmission Class
E1333 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
E1334 Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
E1337 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
E1352 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
E1353 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
E1355 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
E1364 Standard Test Method for Measuring Road Roughness by Static Level Method
E1368 Standard Practice for Visual Inspection of Asbestos Abatement Projects
E1369 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
E1374 Standard Guide for Open Office Acoustics and Applicable ASTM Standards
E1399 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
E1408 Standard Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door Systems
E1410 Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
E1414 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
E1423 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
E1424 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1425 Standard Practice for Determining the Acoustical Performance of Exterior Windows and Doors
E1433 Standard Guide for Selection of Standards on Environmental Acoustics
E1448 Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
E1464 Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
E1465 Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
E1472 Standard Guide for Documenting Computer Software for Fire Models
E1474 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
E1480 Standard Terminology of Facility Management (Building-Related)
E1481 Standard Terminology of Railing Systems and Rails for Buildings
E1486 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
E1486M Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
E1489 Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
E1494 Standard Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials
E1503 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
E1509 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
E1512 Standard Test Methods for Testing Bond Performance of Bonded Anchors
E1513 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E1514 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
E1529 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
E1537 Standard Test Method for Fire Testing of Upholstered Furniture
E1546 Standard Guide for Development of Fire-Hazard-Assessment Standards
E1551 Standard Specification for Special Purpose, Smooth-Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
E1554 Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
E1555 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
E1556 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
E1557 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
E1573 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
E1574 Standard Test Method for Measurement of Sound in Residential Spaces
E1580 Standard Guide for Surveillance of Accredited Laboratories
E1590 Standard Test Method for Fire Testing of Mattresses
E1591 Standard Guide for Obtaining Data for Deterministic Fire Models
E1592 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
E1602 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
E1605 Standard Terminology Relating to Lead in Buildings
E1612 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
E1613 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
E1623 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
E1637 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
E1643 Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
E1644 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1645 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
E1646 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
E1656 Standard Guide for Classification of Automated Pavement Condition Survey Equipment
E1660 Standard Classification for Serviceability of an Office Facility for Support for Office Work
E1661 Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
E1662 Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
E1663 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
E1664 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
E1665 Standard Classification for Serviceability of an Office Facility for Facility Protection
E1666 Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
E1667 Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
E1668 Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
E1669 Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
E1670 Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
E1671 Standard Classification for Serviceability of an Office Facility for Cleanliness
E1677 Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
E1678 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
E1679 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
E1680 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
E1686 Standard Guide for Selection of Environmental Noise Measurements and Criteria
E1692 Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
E1693 Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
E1694 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
E1699 Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems
E1700 Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
E1701 Standard Classification for Serviceability of an Office Facility for Manageability
E1703/E1703M Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
E1704 Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
E1725 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
E1726 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
E1727 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
E1728 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
E1729 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
E1730 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
E1740 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
E1741 Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry
E1745 Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
E1748 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
E1749 Standard Terminology Relating to Rigid Wall Relocatable Shelters
E1753 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
E1765 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
E1773 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
E1775 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
E1776 Standard Guide for Development of Fire-Risk-Assessment Standards
E1777 Standard Guide for Prioritization of Data Needs for Pavement Management
E1778 Standard Terminology Relating to Pavement Distress
E1779 Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
E1780 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
E1783 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
E1792 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
E1793 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
E1794 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
E1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1796 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1797 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1800 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
E1801 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
E1803 Standard Test Methods for Determining Structural Capacities of Insulated Panels
E1804 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
E1822 Standard Test Method for Fire Testing of Stacked Chairs
E1825 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
E1826 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
E1827 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
E1828 Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint
E1836 Standard Classification for Building Floor Area Measurements for Facility Management
E1844 Standard Specification for A Size 10 4-5 Smooth-Tread Friction Test Tire
E1845 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth
E1851 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
E1857 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
E1859 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
E1864 Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures
E1886 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
E1889 Standard Guide for Pavement Management Implementation
E1890 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment
E1895 Standard Guide for Determining Uses and Limitations of Deterministic Fire Models
E1908 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
E1911 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
E1918 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
E1925 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
E1926 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
E1927 Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
E1946 Standard Practice for Measuring Cost Risk of Buildings and Building Systems
E1957 Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
E1960 Standard Practice for Calculating International Friction Index of a Pavement Surface
E1966 Standard Test Method for Fire-Resistive Joint Systems
E1971 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
E1974 Standard Specification for Shelter, Electrical Equipment S-250/G
E1975 Standard Specification for Shelter, Electrical, Equipment S-280/G
E1976 Standard Specification for Shelter, Tactical, Nonexpandable
E1977 Standard Specification for Shelter, Tactical, Expandable, One-Side
E1978 Standard Specification for Shelter, Tactical, Expandable, Two-Side
E1979 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
E1980 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
E1991 Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products
E1993 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
E1995 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
E1996 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
E1998 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
E2004 Standard Test Method for Facing Cleavage of Sandwich Panels
E2010 Standard Test Method for Positive Pressure Fire Tests of Window Assemblies
E2013 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
E2025 Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies
E2026 Standard Guide for the Estimation of Building Damageability in Earthquakes
E2029 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
E2032 Standard Guide for Extension of Data From Fire Endurance Tests
E2034 Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces
E2051 Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis
E2052 Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities
E2058 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
E2061 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
E2067 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
E2068 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
E2074 Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies
E2083 Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
E2094 Standard Practice for Evaluating the Service Life of Chromogenic Glazings
E2098 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
E2099 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
E2100 Standard Practice for Calculating the International Runway Friction Index
E2101 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
E2102 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
E2103 Standard Classification for Bridge Elements and Related Approach Work
E2110 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
E2112 Standard Practice for Installation of Exterior Windows, Doors and Skylights
E2114 Standard Terminology for Sustainability Relative to the Performance of Buildings
E2115 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
E2119 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
E2120 Standard Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
E2121 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
E2126 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
E2127 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
E2128 Standard Guide for Evaluating Water Leakage of Building Walls
E2129 Standard Practice for Data Collection for Sustainability Assessment of Building Products
E2131 Standard Practice for Assessing Loss, Damage, or Destruction of Property
E2132 Standard Practice for Physical Inventory of Durable, Moveable Property
E2133 Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
E2134 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
E2135 Standard Terminology for Property and Asset Management
E2136 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability
E2140 Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
E2141 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2150 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
E2151 Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings
E2156 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
E2157 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
E2158 Standard Specification for Dedicated Short Range Communication (DSRC) Physical Layer Using Microwave in the 902 to 928 MHz Band
E2159 Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts
E2166 Standard Practice for Organizing and Managing Building Data
E2167 Standard Guide for Selection and Use of Stone Consolidants
E2168 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
E2174 Standard Practice for On-Site Inspection of Installed Fire Stops
E2178 Standard Test Method for Air Permeance of Building Materials
E2179 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
E2187 Standard Test Method for Measuring the Ignition Strength of Cigarettes
E2188 Standard Test Method for Insulating Glass Unit Performance
E2189 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
E2190 Standard Specification for Insulating Glass Unit Performance and Evaluation
E2194 Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials
E2202 Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
E2203 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
E2204 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
E2213 Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications
E2219 Standard Practice for Valuation and Management of Moveable, Durable Property
E2220 Standard Practice for Establishing the Full Valuation of the Loss/Overage Population Identified During the Inventory of Moveable, Durable Property
E2221 Standard Practice for Administrative Control of Property
E2226 Standard Practice for Application of Hose Stream
E2230 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
E2231 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
E2235 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
E2239 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
E2240 Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2241 Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2249 Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
E2252 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
E2255 Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
E2257 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
E2259 Standard Guide for Archiving and Retrieving ITS-Generated Data
E2260 Standard Guide for Repointing (Tuckpointing) Historic Masonry
E2264 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
E2265 Standard Terminology for Anchors and Fasteners in Concrete and Masonry
E2266 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
E2267 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality
E2268 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
E2269 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
E2270 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
E2271 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities
E2273 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
E2279 Standard Practice for Establishing the Guiding Principles of Property Management
E2280 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
E2300 Standard Specification for Highway Traffic Monitoring Devices
E2306 Standard Practice for Utilization and Disposal of Personal Property
E2307 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus
E2319 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E2320 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
E2321 Standard Practice for Use of Test Methods E 96 for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
E2322 Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
E2323 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
E2335 Standard Guide for Laboratory Monitors
E2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
E2340 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
E2341/E2341M Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
E2342 Standard Test Method for Durability Testing of Duct Sealants
E2351 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality
E2353 Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
E2354 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units
E2355 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
E2356 Standard Practice for Comprehensive Building Asbestos Surveys
E2357 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
E2358 Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
E2359 Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
E2377 Standard Specification for Shelter, Electrical Equipment, Lightweight
E2378 Standard Practice for the Recognition of Impaired or Retired Personal Property
E2379 Standard Practice for Property Management for Career Development and Training
E2380 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
E2392 Standard Guide for Design of Earthen Wall Building Systems
E2393 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
E2394 Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products
E2395 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact.
E2396 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Green Roof Systems
E2397 Standard Practice for Determination of Dead Loads and Live Loads associated with Green Roof Systems
E2398 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Green Roof Systems
E2399 Standard Test Method for Maximum Media Density for Dead Load Analysis of Green Roof Systems
E2400 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems
E2404 Standard Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
E2405 Standard Test Method for Determination of Fire and Thermal Parameters of Materials Using an Intermediate Scale Test with Vertically Oriented Specimen
E2415 Standard Practice for Installing Piezoelectric Highway Traffic Sensors
E2430 Standard Specification For Expanded Polystyrene (EPS) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (EIFS)
E2431 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
E2432 Standard Guide for General Principles of Sustainability Relative to Buildings
E2452 Standard Practice for Equipment Management Process Maturity (EMPM) Model
E2453 Standard Practice for Determining the Life-Cycle Cost of Ownership of Personal Property
E2459 Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
E2461 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
E2462 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
E2463 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
E2467 Standard Practice for Developing Axle Count Adjustment Factors
E2468 Standard Practice for Metadata to Support Archived Data Management Systems
E2485 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
E2486 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
E2495 Standard Practice for Asset Utility
E2497 Standard Practice for Calculation of Equipment Movement Velocity (EMV)
E2499 Standard Practice for Classification of Equipment Physical Location Information
E2506 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
E2514 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
E2516 Standard Classification for Cost Estimate Classification System
E2517 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/ 2 Ton Lightweight Medium Tactical Vehicle (LMTV)/M1082, 2 1/ 2 Ton LMTV Trailer)
E2518 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1082, 5 Ton MTV Trailer)
E2532 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
E2536 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests

F588 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
F842 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
F2233 Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers
F2303 Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits
F2304 Standard Practice for Rehabilitation of Sewers Using Chemical Grouting
F2349 Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems
F2350 Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems
F2414 Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
F2454 Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
F2462 Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
F2550 Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall


Return to Previous Page