Building Codes Collection
A
A6/A6M-06 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A27/A27M-05 Standard Specification for Steel Castings, Carbon, for General Application
A29/A29M-05 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
A36/A36M-05 Standard Specification for Carbon Structural Steel
A47/A47M-99(2004) Standard Specification for Ferritic Malleable Iron Castings
A48/A48M-03 Standard Specification for Gray Iron Castings
A53/A53M-06a Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A74-06 Standard Specification for Cast Iron Soil Pipe and Fittings
A82/A82M-05a Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
A90/A90M-06 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A105/A105M-05 Standard Specification for Carbon Steel Forgings for Piping Applications
A106/A106M-06a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A108-03e1 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A116-05 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
A121-99(2004) Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
A123/A123M-02 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A126-04 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A135/A135M-06 Standard Specification for Electric-Resistance-Welded Steel Pipe
A139/A139M-04 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A148/A148M-05 Standard Specification for Steel Castings, High Strength, for Structural Purposes
A153/A153M-05 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A167-99(2004) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A176-99(2004) Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
A182/A182M-06 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A183-03 Standard Specification for Carbon Steel Track Bolts and Nuts
A184/A184M-06 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
A185/A185M-06e1 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
A193/A193M-06a Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M-06a Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A197/A197M-00(2006) Standard Specification for Cupola Malleable Iron
A213/A213M-06ae1 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A216/A216M-04 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A229/A229M-99(2005) Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
A234/A234M-06a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A240/A240M-06c Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A242/A242M-04e1 Standard Specification for High-Strength Low-Alloy Structural Steel
A249/A249M-04a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A252-98(2002) Standard Specification for Welded and Seamless Steel Pipe Piles
A254-97(2002) Standard Specification for Copper-Brazed Steel Tubing
A264-03 Specification for Stainless Chromium-Nickel Steel-Clad Plate
A269-04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A270-03a Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A276-06 Standard Specification for Stainless Steel Bars and Shapes
A278/A278M-01(2006) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
A283/A283M-03 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A307-04e1 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A308/A308M-06 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A312/A312M-06 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A313/A313M-03 Standard Specification for Stainless Steel Spring Wire
A320/A320M-05a Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
A325M-05 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
A325-06 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A328/A328M-05 Standard Specification for Steel Sheet Piling
A354-04e1 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A370-06 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A376/A376M-06 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A377-03 Standard Index of Specifications for Ductile-Iron Pressure Pipe
A391/A391M-01 Standard Specification for Grade 80 Alloy Steel Chain
A392-06 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A395/A395M-99(2004) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A403/A403M-06 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A413/A413M-01 Standard Specification for Carbon Steel Chain
A416/A416M-06 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A420/A420M-06 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A421/A421M-05 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A424-06 Standard Specification for Steel, Sheet, for Porcelain Enameling
A435/A435M-90(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A449-04be1 Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A463/A463M-06 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A466/A466M-01 Standard Specification for Weldless Chain
A467/A467M-01(2006) Standard Specification for Machine and Coil Chain
A475-03 Standard Specification for Zinc-Coated Steel Wire Strand
A478-97(2002) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A479/A479M-06a Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480/A480M-06b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A489-04e1 Standard Specification for Carbon Steel Lifting Eyes
A490-06 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
A490M-04ae1 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
A491-03 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A492-95(2004) Standard Specification for Stainless Steel Rope Wire
A496/A496M-05 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
A497/A497M-06e1 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
A499-89(2002) Standard Specification for Steel Bars and Shapes, Carbon Rolled from T Rails
A500-03a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501-01(2005) Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A510-06 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
A510M-06 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
A513-06b Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A514/A514M-05 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A516/A516M-06 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A518/A518M-99(2003) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A529/A529M-05 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A532/A532M-93a(2003) Standard Specification for Abrasion-Resistant Cast Irons
A536-84(2004) Standard Specification for Ductile Iron Castings
A554-03 Standard Specification for Welded Stainless Steel Mechanical Tubing
A555/A555M-05 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A563-04a Standard Specification for Carbon and Alloy Steel Nuts
A563M-06 Standard Specification for Carbon and Alloy Steel Nuts [Metric)
A568/A568M-06a Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A572/A572M-06 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A574-04e1 Standard Specification for Alloy Steel Socket-Head Cap Screws
A574M-04e1 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
A575-96(2002) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A580/A580M-06 Standard Specification for Stainless Steel Wire
A582/A582M-05 Standard Specification for Free-Machining Stainless Steel Bars
A586-04a Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
A588/A588M-05 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
A603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope
A606-04 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A615/A615M-06a Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A618/A618M-04 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A625/A625M-03 Standard Specification for Tin Mill Products, Black Plate, Single Reduced
A627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A635/A635M-06a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A641/A641M-03 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A645/A645M-05 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A653/A653M-06a Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M-05e1 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A668/A668M-04 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A674-05 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M-03e1 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A690/A690M-05 Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
A703/A703M-06 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A704/A704M-06 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A706/A706M-06a Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A716-03 Standard Specification for Ductile Iron Culvert Pipe
A722/A722M-06 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
A733-03 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A743/A743M-06 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A746-03 Standard Specification for Ductile Iron Gravity Sewer Pipe
A755/A755M-03 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A760/A760M-06 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A764-95(2001) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A767/A767M-05 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A775/A775M-06 Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A778-01 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A780-01(2006) Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A786/A786M-05 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A792/A792M-06a Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A793-96(2001) Standard Specification for Rolled Floor Plate, Stainless Steel
A794-06 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
A795/A795M-04 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A798/A798M-01 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A809-03 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A817-03 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A820/A820M-06 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A824-01 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A847/A847M-05 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A857/A857M-05 Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A861-04 Standard Specification for High-Silicon Iron Pipe and Fittings
A865/A865M-06 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A875/A875M-06 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
A884/A884M-06 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A888-07a Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A898/A898M-91(2001) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A899-91(2002) Standard Specification for Steel Wire, Epoxy-Coated
A913/A913M-04 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A924/A924M-07 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A929/A929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A934/A934M-04 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A951/A951M-06 Standard Specification for Steel Wire for Masonry Joint Reinforcement
A955/A955M-06a Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
A959-04 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A992/A992M-06a Standard Specification for Structural Steel Shapes
A996/A996M-06a Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A1003/A1003M-05 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1008/A1008M-07 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
A1011/A1011M-06b Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength